ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Using hysteresis current control for STATCOM applications

Sensarma, PS and Padiyar, KR and Ramanarayanan, V (1999) Using hysteresis current control for STATCOM applications. In: Proceedings of 8th European Conference on Power Electronics and Applications. EPE 99, 7-9 Sept. 1999, Lausanne, Switzerland, p. 9.

Full text not available from this repository. (Request a copy)

Abstract

The shunt compensation approach for mitigating power quality (PQ) problems is popular on account of its simpler AC side coupling and lower insulation requirements. The most versatile shunt compensator is the STATCOM, which is a three-phase, voltage-source inverter, whose output current is to be controlled to achieve PQ compensation. In this paper, some aspects of current control of a STATCOM are investigated. A simple (nonpredictive) hysteresis current control scheme is considered. It is shown that, for a given STATCOM, the AC bus voltage largely decides the effectiveness of any simple hysteresis rule. Validity limits of the control laws are analytically derived and both simulation and experimental results are provided in support. Based on these derivations, a simple correction scheme is suggested. Simulation and experimental results confirm improved performance. A digital controller is used for realizing the current control. The dependence of the current harmonic spectrum on the sampling time is illustrated. Some issues regarding ripple filter design are also discussed

Item Type: Conference Paper
Additional Information: Copyright of this article belongs to EPE Association
Keywords: compensation;digital control;electric current control;invertors;power supply quality;static VAr compensators
Department/Centre: Division of Electrical Sciences > Electrical Engineering
Date Deposited: 24 Jul 2007
Last Modified: 27 Aug 2008 12:42
URI: http://eprints.iisc.ernet.in/id/eprint/10254

Actions (login required)

View Item View Item