ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Effect of flexural modes on squeeze film damping in MEMS cantilever resonators

Pandey, Ashok Kumar and Pratap, Rudra (2007) Effect of flexural modes on squeeze film damping in MEMS cantilever resonators. In: Journal of Micromechanics and Microengineering, 17 (12). pp. 2475-2484.

[img] PDF
Flexural.pdf
Restricted to Registered users only

Download (698Kb) | Request a copy

Abstract

We present an analytical model that gives the values of squeeze film damping and spring coefficients for MEMS cantilever resonators taking into account the effect of flexural modes of the resonator. We use the exact mode shapes of a 2D cantilever plate to solve for pressure in the squeeze film and then derive the equivalent damping and spring coefficient relations from the back force calculations. The relations thus obtained can be used for any flexural mode of vibration of the resonators. We validate the analytical formulae by comparing the results with numerical simulations carried out using coupled finite element analysis in ANSYS, as well as experimentally measured values from MEMS cantilever resonators of various sizes vibrating in different modes. The analytically predicted values of damping are, in the worst case, within less than 10% of the values obtained experimentally or numerically. We also compare the results with previously reported analytical formulae based on approximate flexural mode shapes and show that the current results give much better estimates of the squeeze film damping. From the analytical model presented here, we find that the squeeze film damping drops by 84% from the first mode to the second mode in a cantilever resonator, thus improving the quality factor by a factor of 6 to 7. This result has significant implications in using cantilever resonators for mass detection where a significant increase in the quality factor is obtained by using a vacuum.

Item Type: Journal Article
Additional Information: Copyright of this article belongs to Institute of Physics.
Department/Centre: Division of Mechanical Sciences > Mechanical Engineering
Date Deposited: 14 Feb 2008
Last Modified: 19 Sep 2010 04:41
URI: http://eprints.iisc.ernet.in/id/eprint/12410

Actions (login required)

View Item View Item