ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Quantification of Liquid Holdup in the Dropping Zone of a Blast Furnace- A Cold Model Study

Gupta, GS and Naveen, K (2007) Quantification of Liquid Holdup in the Dropping Zone of a Blast Furnace- A Cold Model Study. In: Metallurgical and Materials Transactions B, 38 (2). pp. 203-213.

Full text not available from this repository. (Request a copy)

Abstract

A two-dimensional cold model study, replicating an ironmaking blast furnace dropping zone, was carried out to estimate quantitatively the local dynamic, static, and total liquid holdups in the presence of lateral gas flow. Plastic beads were used as nonwetting packing material, and aqueous barium chloride solution was used to model the liquid flow. The X-ray visualization technique was used to image the entire packed bed followed by preliminary image processing operations in order to obtain the various types of liquid holdup values quantitatively at various locations in the bed. Liquid holdups were estimated at various liquid flow rates. Liquid holdup results have been obtained at local and total bed level and are discussed both in qualitative and quantitative ways. Substantial liquid holdup was found above the raceway zone. Liquid holdup in a few regions in the bed was an order of magnitude higher than average at a particular flow rate. This may have important implications with respect to blast furnace modeling/chemistry.

Item Type: Journal Article
Additional Information: Copyright of this article belongs to Springer.
Department/Centre: Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited: 27 Jun 2008
Last Modified: 27 Aug 2008 13:31
URI: http://eprints.iisc.ernet.in/id/eprint/14651

Actions (login required)

View Item View Item