ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Flow of metal in a wedge-shaped cavity

Biswasa, SK and Rao, KVJ (1983) Flow of metal in a wedge-shaped cavity. In: Journal of Mechanical Working Technology, 8 (1). pp. 27-41.

[img] PDF
article.pdf - Published Version
Restricted to Registered users only

Download (782Kb) | Request a copy
Official URL: http://www.sciencedirect.com/science?_ob=ArticleUR...

Abstract

The wedge shape is a fairly common cross-section found in many non-axisymmetric components used in machines, aircraft, ships and automobiles. If such components are forged between two mutually inclined dies the metal displaced by the dies flows into the converging as well as into the diverging channels created by the inclined dies. The extent of each type of flow (convergent/divergent) depends on the die—material interface friction and the included die angle. Given the initial cross-section, the length as well as the exact geometry of the forged cross-section are therefore uniquely determined by these parameters. In this paper a simple stress analysis is used to predict changes in the geometry of a wedge undergoing compression between inclined platens. The flow in directions normal to the cross-section is assumed to be negligible. Experiments carried out using wedge-shaped lead billets show that, knowing the interface friction and as long as the deformation is not too large, the dimensional changes in the wedge can be predicted with reasonable accuracy. The predicted flow behaviour of metal for a wide range of die angles and interface friction is presented: these characteristics can be used by the die designer to choose the die lubricant (only) if the die angle is specified and to choose both of these parameters if there is no restriction on the exact die angle. The present work shows that the length of a wedge undergoing compression is highly sensitive to die—material interface friction. Thus in a situation where the top and bottom dies are inclined to each other, a wedge made of the material to be forged could be put between the dies and then compressed, whereupon the length of the compressed wedge — given the degree of compression — affords an estimate of the die—material interface friction.

Item Type: Journal Article
Additional Information: Copyright of this article belongs to Elsevier Science.
Department/Centre: Division of Mechanical Sciences > Mechanical Engineering
Date Deposited: 21 Jul 2009 13:20
Last Modified: 19 Sep 2010 05:34
URI: http://eprints.iisc.ernet.in/id/eprint/20690

Actions (login required)

View Item View Item