Husain, E and Nema, RS (1981) Surface Discharge Studies with Uniform Field Electrodes at Low Pressures. In: IEEE Transactions on Electrical Insulation, 16 (2). : 128-133.
full_text_8.pdf - Published Version
Restricted to Registered users only
Download (869Kb) | Request a copy
An investigation of power frequency (50 Hz) surface partial discharges in dry air, using 21r/3 Rogowski profile electrodes in the low pressure range of 0.067 to 91.333 kPa, shows that for the discharges occurring symmetrically around the electrodes and just outside the uniform field region, the breakdown voltages are 20 to 30% lower than those accounted for by the usual Paschen values. Emphasis, therefore, has been given to modified values of breakdown voltages for any useful calculations. The effect of reduced pressure on inception voltage has been discussed and an attempt has been made to explain the difference between the observed and calculated values on the basis of a pressure-dependent secondary ionization coefficient. It is shown that increasing the insulation thickness in a critical pressure range (0.067 to 0.400 kPa) does not allow any significant increase in the discharge free working stress of the insulation system. At higher pressures (>0.400 kPa) the increase in inception voltage with thickness and pressure follows an equation which is expected to hold for other insulating materials as well.
|Item Type:||Journal Article|
|Additional Information:||Copyright 1981 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.|
|Department/Centre:||Division of Electrical Sciences > High Voltage Engineering (merged with EE)|
|Date Deposited:||24 Dec 2009 09:55|
|Last Modified:||19 Sep 2010 05:47|
Actions (login required)