ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Development of Very High Frequency Damped Sine Wave Generator

Nagabhushana, GR and Bhosale, Vijay H and Pande, DC (2008) Development of Very High Frequency Damped Sine Wave Generator. In: 10th International Conference on Electromagnetic Interference and Compatibility, NOV 26-27, 2008, Bangalore, India, pp. 235-240.

[img] PDF
4.pdf - Published Version
Restricted to Registered users only

Download (3474Kb) | Request a copy
Official URL: http://www.ieeexplore.ieee.org/xpls/abs_all.jsp?is...

Abstract

In order to protect the critical electronic equipment/system against damped sine transient currents induced into its cables due to transient electromagnetic fields, switching phenomena, platform resonances, etc. it is necessary to provide proper hardening. The hardness assurance provided can be evaluated as per the test CS 116 of MIL STD 461E/F in laboratory by generating & inducing the necessary damped sine currents into the cables of the Equipment Under Test (EUT). The need and the stringent requirements for building a damped sine wave current generator for generation of damped sine current transients of very high frequencies (30 MHz & 100 MHz) have been presented. A method using LC discharge for the generation has been considered in the development. This involves building of extremely low & nearly loss less inductors (about 5 nH & 14 nH) as well as a capacitor & a switch with much lower inductances. A technique for achieving this has been described. Two units (I No for 30 MHz. & 100 MHz each) have been built. Experiments to verify the output are being conducted.

Item Type: Conference Paper
Additional Information: Copyright 2008IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Department/Centre: Division of Electrical Sciences > Electrical Engineering
Date Deposited: 05 Jan 2010 11:19
Last Modified: 19 Sep 2010 05:54
URI: http://eprints.iisc.ernet.in/id/eprint/25343

Actions (login required)

View Item View Item