Sarkar, Ujjaini and Dasgupta, Dwaipayan and Bhattacharya, Trina and Pal, Sandip and Chakroborty, Tamaghna (2010) Dynamic simulation of activated sludge based wastewater treatment processes: Case studies with Titagarh Sewage Treatment Plant, India. In: Desalination, 252 (1-3). pp. 120-126.
23.pdf - Published Version
Restricted to Registered users only
Download (929Kb) | Request a copy
STOAT has been extensively used for the dynamic simulation of an activated sludge based wastewater treatment plant in the Titagarh Sewage Treatment Plant, near Kolkata, India. Some alternative schemes were suggested. Different schemes were compared for the removal of Total Suspended Solids (TSS), b-COD, ammonia, nitrates etc. A combination of IAWQ#1 module with the Takacs module gave best results for the existing scenarios of the Titagarh Sewage Treatment Plant. The modified Bardenpho process was found most effective for reducing the mean b-COD level to as low as 31.4 mg/l, while the mean TSS level was as high as 100.98 mg/l as compared to the mean levels of TSS (92 62 mg/l) and b-COD (92.0 mg/l) in the existing plant. Scheme 2 gave a better scenario for the mean TSS level bringing it down to a mean value of 0.4 mg/l, but a higher mean value for the b-COD level at 54.89 mg/l. The Scheme Final could reduce the mean TSS level to 2.9 mg/l and the mean b-COD level to as low as 38.8 mg/l. The Final Scheme looks to be a technically viable scheme with respect to the overall effluent quality for the plant. (C) 2009 Elsevier B.V. All rights reserved.
|Item Type:||Journal Article|
|Additional Information:||Copyright of this article belongs to Elsevier Science.|
|Keywords:||Sewage; Activated sludge; Waste water; Dynamic simulation; STOAT|
|Department/Centre:||Division of Mechanical Sciences > Chemical Engineering|
|Date Deposited:||30 Mar 2010 12:32|
|Last Modified:||19 Sep 2010 05:57|
Actions (login required)