ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

A note on the choice of interfacial friction angle

Rao, Subba KS and Allam, MM and Robinson, RG (1996) A note on the choice of interfacial friction angle. In: Geotechnical Engineering, 119 (2). pp. 123-128.

Full text not available from this repository.
Official URL: http://www.icevirtuallibrary.com/content/article/1...

Abstract

Estimates of interfacial friction angle (delta) are necessary for the design of retaining structures and deep foundations, Recommendations in the literature regarding delta values are often contradictory and are therefore not easy to apply in geotechnical design, A critical examination of past studies in terms of data generation techniques used and conclusions drawn indicates that two distinctly different test procedures/techniques have been evolved. The interfacial situation in practice can also be categorized into two broad types, These two types of interface problems in geotechnical engineering are (a) the structure is placed on the free surface of prepared fill (type A situation) and (b) the fill is placed against the material surface which functions as a confined boundary (type B situation), The friction angle delta depends on the surface roughness of the construction material, But in the type A situation, it is independent of density and its limiting maximum value (delta(lim)) is the critical state friction angle phi(cv). In the type B situation, it is dependent on density of the fill and its limiting maximum value is the peak angle of internal friction phi(p) of the fill.

Item Type: Journal Article
Additional Information: Copyright of this article belongs to Thomas Telford.
Department/Centre: Division of Mechanical Sciences > Civil Engineering
Date Deposited: 10 May 2011 07:42
Last Modified: 10 May 2011 07:42
URI: http://eprints.iisc.ernet.in/id/eprint/37022

Actions (login required)

View Item View Item