ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Studies of the wetting characteristics of liquid iron on dense alumina by the X-ray sessile drop technique

Kapilashrami, E and Jakobsson, A and Seetharaman, S and Lahiri, AK (2003) Studies of the wetting characteristics of liquid iron on dense alumina by the X-ray sessile drop technique. In: Metallurgical and Materials Transactions B, 34 (2). pp. 193-199.

[img] PDF
Studies_of_the_Wetting.pdf - Published Version
Restricted to Registered users only

Download (1751Kb) | Request a copy
Official URL: http://www.springerlink.com/content/30n50730168118...

Abstract

In the present work, the reaction between a molten iron drop and dense alumina was studied using the X-ray sessile-drop method under different oxygen partial pressures in the gas atmosphere. The changes in contact angles between the iron drop and the alumina substrate were followed as functions of temperature and varying partial pressures of oxygen in the temperature range 1823 to 1873 K both in static and dynamic modes. The results of the contact angle measurements with pure iron in contact with dense alumina in extremely well-purified argon as well as under different oxygen partial pressures in the gas atmosphere showed good agreement with earlier measurements reported in the literature. In the dynamic mode, when argon was replaced by a CO-CO2-Ar mixture with a well-defined PO, in the gas, the contact angle showed an initial decrease followed by a period of nearly constant contact angle. At the end of this period, the length of which was a function of the P-O2 imposed, a further steep decrease in the contact angle was noticed. An intermediate layer of FeAl2O4 was detected in the scanning electron microscope (SEM) analysis of the reacted substrates. An interesting observation in the present experiments is that the iron drop moved away from the site of the reaction once the product layer covered the interface. The results are analyzed on the basis of the various forces acting on the drop.

Item Type: Journal Article
Additional Information: Copyright of this article belongs to Springer.
Department/Centre: Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited: 24 Aug 2011 06:36
Last Modified: 24 Aug 2011 06:36
URI: http://eprints.iisc.ernet.in/id/eprint/40223

Actions (login required)

View Item View Item