Sivaprasad, PV and Venugopal, S and Venugopal, Sridhar and Maduraimuthu, V and Vasudevan, M and Mannan, SL and Prasad, YVRK and Chaturvedi, RC (2003) Validation of processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using hot forging and rolling tests. In: Journal of Materials Processing Technology, 132 (1-3). 262-268 .
Validation_of_processing.pdf - Published Version
Restricted to Registered users only
Download (439Kb) | Request a copy
The processing maps are being developed for use in optimising hot workability and controlling the microstructure of the product. The present investigation deals with the examination to assess the prediction of the processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using forging and rolling tests at different temperatures in the range of 600-1200 degreesC. The tensile properties of these deformed products were evaluated at room temperature. The influence of the processing conditions, i.e. strain rate and temperature on the tensile properties of the deformed product were analysed to identify the optimum processing parameters. The results have shown good agreement between the regimes exhibited by the map and the properties of the rolled or forged product. The optimum parameters for processing of this steel were identified as rolling or press forging at temperatures above 1050 degreesC to obtain optimum product properties. (C) 2002 Elsevier Science B.V. All rights reserved.
|Item Type:||Journal Article|
|Additional Information:||Copyright of this article belongs to Elsevier Science.|
|Keywords:||Processing maps;Austenitic stainless steel;Hot forging;Rolling|
|Department/Centre:||Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)|
|Date Deposited:||25 Aug 2011 08:58|
|Last Modified:||25 Aug 2011 08:58|
Actions (login required)