ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Model track studies on fouled ballast using ground penetrating radar and multichannel analysis of surface wave

Anbazhagan, P and Lijun, Su and Buddhima, Indraratna and Cholachat, Rujikiatkamjorn (2011) Model track studies on fouled ballast using ground penetrating radar and multichannel analysis of surface wave. In: Journal of Applied Geophysics, 74 (4). pp. 175-184.

[img] PDF
Model_track.pdf - Published Version
Restricted to Registered users only

Download (3765Kb) | Request a copy
Official URL: http://dx.doi.org/10.1016/j.jappgeo.2011.05.002

Abstract

Ballast fouling is created by the breakdown of aggregates or outside contamination by coal dust from coal trains, or from soil intrusion beneath rail track. Due to ballast fouling, the conditions of rail track can be deteriorated considerably depending on the type of fouling material and the degree of fouling. So far there is no comprehensive guideline available to identify the critical degree of fouling for different types of fouling materials. This paper presents the identification of degree of fouling and types of fouling using non-destructive testing, namely seismic surface-wave and ground penetrating radar (GPR) survey. To understand this, a model rail track with different degree of fouling has been constructed in Civil engineering laboratory, University of Wollongong, Australia. Shear wave velocity obtained from seismic survey has been employed to identify the degree of fouling and types of fouling material. It is found that shear wave velocity of fouled ballast increases initially, reaches optimum fouling point (OFP), and decreases when the fouling increases. The degree of fouling corresponding after which the shear wave velocity of fouled ballast will be smaller than that of clean ballast is called the critical fouling point (CFP). Ground penetrating radar with four different ground coupled antennas (500 MHz, 800 MHz, 1.6 GHz and 2.3 GHz) was also used to identify the ballast fouling condition. It is found that the 800 MHz ground coupled antenna gives a better signal in assessing the ballast fouling condition. Seismic survey is relatively slow when compared to GPR survey however it gives quantifiable results. In contrast, GPR survey is faster and better in estimating the depth of fouling. (C) 2011 Elsevier B.V. All rights reserved.

Item Type: Journal Article
Additional Information: Copyright of this article belongs to Elsevier Science B.V.
Keywords: Ballast; Fouling;GPR;Seismic surface-wave survey;Shear wave velocity
Department/Centre: Division of Mechanical Sciences > Civil Engineering
Date Deposited: 12 Oct 2011 10:24
Last Modified: 12 Oct 2011 10:24
URI: http://eprints.iisc.ernet.in/id/eprint/41305

Actions (login required)

View Item View Item