ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Effect of Pt on interdiffusion and mechanical properties of the gamma and gamma ` phases in the Ni-Pt-Al system

Divya, VD and Ramamurty, Upadrasta and Paul, A (2012) Effect of Pt on interdiffusion and mechanical properties of the gamma and gamma ` phases in the Ni-Pt-Al system. In: PHILOSOPHICAL MAGAZINE, 92 (17). pp. 2187-2214.

[img] PDF
phy_mag_92-17_2187-2214_2012.pdf - Published Version
Restricted to Registered users only

Download (1580Kb) | Request a copy
Official URL: http://dx.doi.org/10.1080/14786435.2012.669073

Abstract

The effect of Pt on the growth kinetics of the gamma'-Ni(Pt)](3)Al ordered intermetallic phase and the gamma- Ni(Pt, Al) solid solution diffusion rates of the species, hardness and elastic modulus was examined by employing the diffusion couple experimental technique. Experiments were conducted by using the beta-Ni(Pt)Al phase and Ni(Pt) alloy couples, each of which had a fixed amount of Pt (5, 10 and 15 at. %) in both the end members so that the Pt content is more or less constant throughout the interdiffusion zone. The results suggest that the growth kinetics of both phases and the average effective interdiffusion coefficients of Ni and Al increase with the increase in Pt content. Nanoindentation studies across the compositional gradients show that the mechanical properties of the intermetallic phase in the superalloy are relatively insensitive to the presence of Pt but are more sensitive to the Ni/Al ratio. In contrast, the marked variation in the hardness of the gamma phase were noted, increasing markedly with Al concentration in a given couple and also increasing with increasing Pt content. Possible causes for the observed variations are discussed.

Item Type: Journal Article
Additional Information: Copyright for this article belongs to Taylor and Francis
Keywords: nickel aluminide;interdiffusion;diffusion mechanism;defect; nanoindentation
Department/Centre: Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited: 25 Jun 2012 12:28
Last Modified: 28 Jun 2012 08:57
URI: http://eprints.iisc.ernet.in/id/eprint/44719

Actions (login required)

View Item View Item