ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Removal of unwanted fluid

Subudhi, Sudhakar and Sreenivas, KR and Arakeri, Jaywant H (2012) Removal of unwanted fluid. In: Heat and Mass Transfer/Waerme- und Stoffuebertragung . pp. 1-12.

[img] PDF
heat_mass_tran_2012.pdf - Published Version
Restricted to Registered users only

Download (934Kb) | Request a copy
Official URL: http://dx.doi.org/10.1007/s00231-012-1068-9

Abstract

This work is concerned with the removal of unwanted fluid through the source-sink pair. The source consists of fluid issuing out of a nozzle in the form of a jet and the sink is a pipe that is kept some distance from the source pipe. Of concern is the percentage of source fluid sucked through the sink. The experiments have been carried in a large glass water tank. The source nozzle diameter is 6Â mm and the sink pipe diameter is either 10 or 20Â mm. The horizontal and vertical separations and angles between these source and sink pipes are adjustable. The flow was visualized using KMnO 4 dye, planer laser induced fluorescence and particle streak photographs. To obtain the effectiveness (that is percentage of source fluid entering the sink pipe), titration method is used. The velocity profiles with and without the sink were obtained using particle image velocimetry. The sink flow rate to obtain a certain effectiveness increase dramatically with lateral separation. The sink diameter and the angle between source and the sink axes don't influence effectiveness as much as the lateral separation.

Item Type: Journal Article
Additional Information: Copyright for this article belongs to Springer
Department/Centre: Division of Mechanical Sciences > Mechanical Engineering
Date Deposited: 18 Sep 2012 10:16
Last Modified: 21 Sep 2012 03:01
URI: http://eprints.iisc.ernet.in/id/eprint/45031

Actions (login required)

View Item View Item