ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Fabrication and characterisation of bulk micromachined ZnO energy transducer with interdigitated electrodes

Chhabra, Priya and Sharma, Anurekha and Krishna, Vamsi NP (2016) Fabrication and characterisation of bulk micromachined ZnO energy transducer with interdigitated electrodes. In: 2nd International Conference on Surfaces, Coatings and Nanostructured Materials - Asia (NANOSMAT-Asia), MAR 24-27, 2015, Kayseri, TURKEY, pp. 1055-1066.

[img] PDF
Mic_Tec_22-5_1055_2016.pdf - Published Version
Restricted to Registered users only

Download (6Mb) | Request a copy
Official URL: http://dx.doi.org/10.1007/s00542-015-2558-8

Abstract

The proposed research work deals with the design, fabrication and characterisation of a ZnO cantilever energy transducer on Si(c) without the use of SOI wafers, thereby, reducing the cost of fabrication. The energy transducer is operated in the longitudinal mode through the interdigitated electrodes. This is for the first time, we have attempted to fabricate a cantilever transducer with interdigitated electrodes on Si(c) in our lab. The design frequency has been chosen in the range of 700-1000 Hz for a typical tire pressure monitoring system application in mind. The experimentally obtained frequency is 876.25 Hz and d(33) was calculated as 3.9 pC/N from the measurements. The experimental results are further validated by simulation and the feasibility of its application as energy harvester is demonstrated. The fabrication process is being optimised to fabricate devices with higher piezoelectric coefficients.

Item Type: Conference Proceedings
Related URLs:
Additional Information: Copy right for this article belongs to the SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA
Department/Centre: Other Centres/Units/UG Programme > Centre for Nano Science and Engineering
Date Deposited: 17 Jun 2016 05:32
Last Modified: 17 Jun 2016 05:32
URI: http://eprints.iisc.ernet.in/id/eprint/53968

Actions (login required)

View Item View Item