ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Microstructure related influence on the electrical properties of pulsed laser ablated (Ba,Sr) $TiO_3$ thin films

Saha, S and Kurpanidhi, SB (2000) Microstructure related influence on the electrical properties of pulsed laser ablated (Ba,Sr) $TiO_3$ thin films. In: Journal of Applied Physics, 88 (6). pp. 3506-3513.

[img] PDF
Microstructure_related_influence_on_the_electrical_properties_of_pulsed_laser.pdf
Restricted to Registered users only

Download (223Kb) | Request a copy

Abstract

The microstructural dependence of electrical properties of $(Ba, Sr)TiO_3 (BST)$ thin films were studied from the viewpoint of dc and ac electrical properties. The films were grown using a pulsed laser deposition technique in a temperature range of 300 to 600 °C, inducing changes in grain size, structure, and morphology. Consequently, two different types of films were realized, of which type I, was polycrystalline, multigrained, while type II was [100] oriented possessing a densely packed fibrous microstructure. Leakage current measurements were done at elevated temperatures to provide evidence of the conduction mechanism present in these films. The results revealed a contribution from both electronic and ionic conduction. In the case of type I films, two trapping levels were identified with energies around 0.5 and 2.73 eV, which possibly originate from oxygen vacancies $V_O$ and $Ti^{3+}$ centers, respectively. These levels act as shallow and deep traps and are reflected in the current–voltage characteristics of the BST thin films. The activation energy associated with oxygen vacancy motion in this case was obtained as 1.28 eV. On the contrary, type II films showed no evidence of deep trap energy levels, while the identified activation energy associated with shallow traps was obtained as 0.38 eV. The activation energy obtained for oxygen vacancy motion in type II films was around 1.02 eV. The dc measurement results were further elucidated through ac impedance analysis, which revealed a grain boundary dominated response in type I in comparison to type II films where grain response is highlighted. A comparison of the mean relaxation time of the two films revealed three orders of magnitude higher relaxation time in the case of type I films. Due to smaller grain size in type I films the grains were considered to be completely depleted giving rise to only grain boundary response for the bulk of the film. The activation energy obtained from conductivity plots agree very well with that of dc measurements giving values 1.3 and 1.07 eV for type I and type II films, respectively. Since oxygen vacancy transport have been identified as the origin of resistance degradation in BST thin films, type I films with their higher value of activation energy for oxygen ion mobility explains the improvement in breakdown characteristics under constant high dc field stress. The role of microstructure in controlling the rate of degradation is found useful in this instance to enhance the film properties under high electric field stresses.

Item Type: Journal Article
Additional Information: Copyright of this article belongs to American Institute of Physics.
Department/Centre: Division of Chemical Sciences > Materials Research Centre
Date Deposited: 13 Jul 2006
Last Modified: 19 Sep 2010 04:29
URI: http://eprints.iisc.ernet.in/id/eprint/7879

Actions (login required)

View Item View Item