ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Browse by Author

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 60.

Conference Paper

Bandyopadhyay, A and Ramamurty, U and Dwarakadasa, ES (1993) Effect of Cathodic Charging on 8090-T851 Under Stressed And Unstressed Conditions. In: Symposium on Microstructures and Mechanical Properties of Aging Materials, in Conjunction with the Fall Meeting of the Minerals-Metals-and-Materials-Society (TMS), NOV 02-05, 1992, CHICAGO.

Journal Article

Shabadi, R and Ambat, R and Dwarakadasa, ES (2014) AZ91C magnesium alloy modified by Cd. In: MATERIALS & DESIGN, 53 . pp. 445-451.

Ray, AK and Dwarakadasa, ES and Das, DK and Ranganath, VR and Goswam, B and Sahu, JK and Whittenberger, JD (2007) Fatigue behavior of a thermal barrier coated superalloy at $800 ^0 C$. In: Materials Science and Engineering: A, 448 (1-2). pp. 294-298.

Ray, AK and Roy, N and Dash, B and Das, DK and Ranganath, VR and Goswami, B and Singh, MP and Tiwari, YN and Roy, PK and Das, HK and Sanyal, D and Dwarakadasa, ES (2006) High temperature mechanical properties of thermal barrier coated superalloy applied to combustor liner of aero engines. In: High temperature materials and processes, 25 (3). pp. 109-119.

Shabadi, Rajashekhar and Kumar, Subodh and Roven, Hans J and Dwarakadasa, ES (2004) Effect of specimen condition, orientation and alloy composition on PLC band parameters. In: Materials Science and Engineering: A, 382 (1-2). pp. 203-208.

Shabadi, R and Kumar, S and Dwarakadasa, ES and Roven, HJ (2004) Propagative plasticity in commercial aluminium alloys. In: Transactions Of The Indian Institute Of Metals, 57 (1). pp. 61-69.

Shabadi, Rajashekhar and Kumara, Subodh and Roven, Hans J and Dwarakadasa, ES (2004) Characterisation of PLC band parameters using laser speckle technique. In: Materials Science and Engineering A, 364 (1-2). pp. 140-150.

Venkatesan, R and Dwarakadasa, ES and Ravindran, M (2003) Biofilm formation on structural materials in deep sea environments. In: Indian Journal Of Engineering And Materials Sciences, 10 (6). pp. 486-491.

Kumar, NVR and Pai, BC and Dwarakadasa, ES (2003) Microstructural evolution in liquid metal processed Al-alloy/SiCp composites. In: International Journal of Cast Metals Research, 15 (6). pp. 573-579.

Venkatesan, R and Venkatasamy, MA and Bhaskaran, TA and Dwarakadasa, ES and Ravindran, M (2002) Corrosion of ferrous alloys in deep sea environments. In: British Corrosion Journal, 37 (4). pp. 257-266.

Ravi, M and Pillai, UTS and Pai, BC and Damodaran, AD and Dwarakadasa, ES (2002) The effect of mischmetal addition on the structure and mechanical properties of a cast Al-7Si-0.3Mg alloy containing excess iron (up to 0.6 Pct). In: Metallurgical and Materials Transactions A, 33 (2). pp. 391-400.

Bag, Asim and Dwarakadasa, ES and Ray, KK (2001) Influence of martensite content and morphology on the toughness and fatigue behavior of high-martensite dual-phase steels. In: Metallurgical and Materials Transactions A, 32 (9). pp. 2207-2217.

Fuxiao, Yu and Jianzhong, Cui and Ranganathan, S and Dwarakadasa, ES (2001) Fundamental differences between spray forming and other semisolid processes. In: Materials Science and Engineering A, 304-30 . pp. 621-626.

Kumar, Ravi NV and Dwarakadasa, ES (2000) Effect of matrix strength on the mechanical properties of Al–Zn–Mg/SiCP composites. In: Composites Part A: Applied Science and Manufacturing, 31 (10). pp. 1139-1145.

Sudhakar, KV and Sampathkumaran, P and Dwarakadasa, ES (2000) Dry sliding wear in high density Fe-2%Ni based P/M alloys. In: Wear, 242 (1-2). pp. 207-212.

Sudhakar, KV and Dwarakadasa, ES (2000) A study on fatigue crack growth in dual phase martensitic steel in air environment. In: Bulletin of Materials Science, 23 (3). pp. 193-199.

Kumar, NVR and Dwarakadasa, ES (2000) Effect of matrix strength on the mechanical properties of Al-Zn-Mg/SiCp composites. In: Composites Part A: Applied Science and Manufacturing, 31 (10). pp. 1139-1145.

Fuxiao, YU and Dwarakadasa, ES and Ranganathan, S (1999) Distribution of lead in lead-containing aluminium alloys obtained by liquid phase co-spray forming technique. In: Bulletin of Materials Science, 22 (6). pp. 959-963.

Bag, A and Ray, KK and Dwarakadasa, ES (1999) Influence of Martensite Content and Morphology on Tensile and Impact Properties of High-Martensite Dual-Phase Steels. In: Metallurgical And Materials Transactions A, 30 (5). pp. 1193-1202.

Ray, AK and Das, G and Mukhopadhyay, NK and Bhattacharya, DK and Dwarakadasa, ES and Parida, N (1999) Studies on indentation fracture toughness on ceramic and ceramic composite using acoustic emission technique. In: Bulletin of Materials Science, 22 (1). pp. 25-32.

Murthy, KSN and Subramanian, S and Dwarakadasa, ES (1997) Corrosion behaviour of 8090-T851 Al-Li alloy and aluminium in pH 2 solution containing cupric ions. In: British Corrosion Journal, 32 (1). pp. 63-67.

Ravi, M and Pillai, UTS and Pai, BC and Damodaran, AD and Dwarakadasa, ES (1996) A study of the influence of mischmetal additions to Al-7Si-0.3Mg (LM 25/356) alloy. In: Metallurgical and Materials Transactions A, 25 (7). pp. 1283-1292.

Ambat, R and Prasad, Krishna R and Dwarakadasa, ES (1995) The influence of aging at $180^o\hspace{2mm}C$ on the corrosion behaviour of a ternary Al---Li---Zr alloy. In: Corrosion Science, 37 (8). pp. 1253-1265.

Murthy, KSN and Dwarakadasa, ES (1995) Role of Li+ ions in corrosion behaviour of 8090 Al-Li alloy and aluminium in pH 12 aqueous solutions. In: British Corrosion Journal, 30 (2). 111-115 .

Murthy, KSN and Ambat, R and Dwarakadasa, ES (1994) The role of metal cations on the corrosion behaviour of 8090-T851 alloy in pH 2.0 solution. In: Corrosion Science, 36 (10). pp. 1765-1775.

Ambat, R and Dwarakadasa, ES (1994) Studies on the influence of chloride ion and pH on the electrochemical behaviour of aluminium alloys 8090 and 2014. In: Journal of Applied Electrochemistry, 24 (9). pp. 911-916.

Kumar, Ravi NV and Dwarakadasa, ES (1994) Fracture behaviour of $Al-Zn-Mg/SiC_p$ composites. In: Journal of Materials Science, 29 (6). pp. 1533-1539.

Ravindra, A and Bandyopadhyay, Amit and Dwarakadasa, ES and Srivatsan, TS (1994) Influence of hydrogen charging on mechanical properties of gas tungsten arc weldments of aluminium-lithium alloy 8090. In: Journal of Materials Science, 29 (5). pp. 1203-1212.

Ramamurty, U and Bandyopadhyay, Amit and Dwarakadasa, ES (1993) Effect of heat treatment environment on Li depletion and on mechanical properties in AI-Li alloy sheets. In: Journal of Materials Science, 28 (23). pp. 6340-6346.

Ravindra, A and Dwarakadasa, ES and Srivatsan, TS and Ramanath, C and Iyengar, KVV (1993) Electron-beam weld microstructures and properties of aluminium-lithium alloy 8090. In: Journal of Materials Science (full set), 28 (12). pp. 3173-3182.

Jasim, Mohammed K and Dwarakadasa, ES (1993) Effect of sliding speed on adhesive wear of binary Al-Si alloys. In: Journal of Materials Science Letters, 12 (9). pp. 650-653.

Bandyopadhyay, A and Ramamurthy, U and Dwarakadasa, ES (1993) Strain localization behaviour of Al-Cu and Al-Li-Cu-Mg-Zr alloys due to cathodic charging. In: Journal of Materials Science Letters, 12 (8). pp. 555-557.

Sampath, V and Dwarakadasa, ES (1993) A Study of The Fatigue, Impact and fracture-Toughness Characteristics of Electroslag Refined IS-7670 Alloy. In: Canadian Metallurgical Quarterly, 32 (1). pp. 57-67.

Murthy, KSN and Dwarakadasa, ES (1993) Corrosion behavior of 8090-T851 alloy in HCl solution containing metal cations. In: Bulletin of Electrochemistry, 9 (8-10). pp. 419-422.

Dwarakadasa, ES (1993) Low Temperature Microscopy and Analysis by Patric Echlin. In: Journal of the Electrochemical Society of India, 42 (4). p. 263.

Sampath, V and Dwarakadasa, ES (1992) Effect Of Electroslag Refining On Microstructure And Mechanical-Properties Of Is-7670 Alloy. In: Scandinavian Journal of Metallurgy, 21 (6). pp. 266-278.

Jasim, Mohammed K and Dwarakadasa, ES (1992) Effect of mechanical properties on the adhesive wear of metals. In: Journal of Materials Science Letters, 11 (19). pp. 1309-1311.

Ambat, Rajan and Dwarakadasa, ES (1992) The influence of pH on the corrosion of medium strength aerospace alloys 8090, 2091 and 2014. In: Corrosion Science, 33 (5). pp. 681-690.

Jasim, Mohammed K and Dwarakadasa, ES (1992) Dry sliding wear in binary Al-Si alloys at low bearing pressures. In: Journal of Materials Science Letters, 11 (7). pp. 421-423.

Ravindra, A and Dwarakadasa, ES (1992) Effect of post-weld heat treatment on mechanical properties of gas-tungsten arc welds of Al-Li alloy 8090. In: Journal of Materials Science Letters, 11 (22). pp. 1543-1546.

Ravichandran, MV and Prasad, Krishna R and Dwarakadasa, ES (1992) Fracture toughness evaluation of aluminium 4% $M_g-AI_20_3$ liquid-metallurgy particle composite. In: Journal of Materials Science Letters, 11 (8). 452 -456.

Udyavar, Mradulla S and Dwarakadasa, ES (1992) Surface depletion of lithium in medium-strength aeronautical AI-Li alloys during heat treatment. In: Journal of Materials Science Letters, 11 (8). 490 -492.

Ravichandran, KS and Dwarakadasa, ES (1991) Micromechanics Of Fatigue Crack-Growth At Low Stress Intensities In A High-Strength Steel. In: Transactions of the Indian Institute of Metals, 44 (5). 375 -396.

Ravichandran, KS and Dwarakadasa, ES and Banerjee, D (1991) Mechanisms of cleavage during fatigue crack growth in $Ti-6Al-4V$ alloy. In: Scripta Metallurgica et Materialia, 25 (9). pp. 2115-2120.

Ravichandran, KS and Dwarakadasa, ES (1991) Theoretical Modelling of the Effects of Grain Size on the Threshold for Fatigue Crack Growth. In: Acta Metallurgica et Materialia, 39 (6). pp. 1343-1357.

Ravichandran, KS and Dwarakadasa, ES (1990) Effects of temper level on the dependence of fatigue crack growth threshold and crack closure on the prior austenitic grain size. In: Metallurgical Transactions. Physical Metallurgy and Material, 21 (12). pp. 3171-3186.

Ravichandran, KS and Dwarakadasa, ES (1989) Fatigue crack growth transitions in Ti-6Al-4V alloy. In: Scripta Metallurgica, 23 (10). pp. 1685-1690.

Ravichandran, KS and Panchapagesan, TS and Kishore, * and Dwarakadasa, ES (1987) The effect of crack closure on the grain size dependence of fatigue crack growth threshold. In: Scripta Metallurgica, 21 (7). pp. 919-924.

Ravichandran, KS and Rao, Venkata HC and Dwarakadasa, ES and Nair, Krishnadas CG (1987) Microstructural effects and crack closure during near-threshold fatigue crack propagation in a high-strength steel. In: Metallurgical and Materials Transactions A, 18 (6). pp. 865-876.

Ravichandran, KS and Dwarakadasa, ES (1987) Effects of tempered structure on the near threshold fatigue crack growth behavior of a coarse grained high strength steel. In: Engineering Fracture Mechanics, 28 (4). pp. 435-444.

Ray, AK and Dwarakadasa, ES and Raman, KS (1986) Effect of porosity and slag inclusions on the fatigue fracture behaviour of 15CDV6 butt welds. In: Journal of Materials Science Letters, 5 (8). pp. 765-768.

Vijayaraju, K and Dwarakadasa, ES (1986) Computer-aided composition-treatment-structure-property correlation studies in steels. In: Bulletin of Materials Science, 8 (2). pp. 193-198.

Vijayaraju, K and Dwarakadasa, ES and Panchapagesan, TS (1986) Role of vacancies in the ductile fracture of commercially pure aluminum. In: Journal of Materials Science Letters, 5 (10). pp. 1000-1002.

Vijayaraju, K and Dwarakadasa, ES and Abboud, Jaafar Hadi (1985) SEM studies of fractures in spinodally hardened Cu-9Ni-6Sn-X alloys. In: Journal of Materials Science Letters, 4 (9). pp. 1111-1114.

Bai, BN Pramila and Dwarakadasa, ES and Biswas, SK (1982) Scanning electron microscopy studies of wear in LM13 and LM13-graphite particulate composite. In: Wear, 76 (2). pp. 211-220.

Bai, BN Pramila and Dwarakadasa, ES and Biswas, SK (1981) Subsurface damage in dry wear of Al-Si alloys. In: Wear, 71 (3). pp. 381-384.

Dwarakadasa, ES and Raman, KS and Vasu, KI (1969) Comments on ‘beryllium-vacancy interaction in Al-based alloys. In: Scripta Metallurgica, 3 (5). pp. 291-292.

Dwarakadasa, ES and Raman, KS and Vasu, KI (1969) On the influence of beryllium atoms on the resistivity changes due to clustering in Al--4.4%Zn alloy at 0°C. In: Scripta Metallurgica, 3 (5). pp. 327-331.

Dwarakadasa, ES and Raman, KS and Vasu, KI (1968) Beryllium-vacancy interaction in an Al-4.4%Zn-0.3%Be alloy. In: Scripta Metallurgica, 2 (11). pp. 639-642.

Editorials/Short Communications

Shabadi, Rajashekhar and Roven, Hans Jørgen and Kumar, Surendra and Dwarakadasa, ES (2002) Assessing formability of sheet metals through advanced tensile and LASER speckle analysis. In: Materials Science Forum, 396-4 . pp. 1623-1628.

This list was generated on Tue Oct 15 18:59:23 2019 IST.