ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Browse by Author

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 41.

Conference Paper

Rangaraj, Lingappa and Suresha, Siriyara J and Divakar, Canchi and Jayaram, Vikram (2008) Low-Temperature Processing of ZrB2-ZrC Composites by Reactive Hot Pressing. In: Symposium on Materials Behavior - Far from Equilibrium, DEC 15-16, 2006, Bombay.

Bhatia, Tania and Chattopadhyay, K and Jayaram, Vikram (1997) Effect of liquid precursor pyrolysis on phase selection in the MgO-MgAl2O4 system. In: Ninth International Conference on Rapidly Quenched and Metastable Materials, Aug 25-30, 1996, Bratislava, Slovakia.

Journal Article

Praveena, Manimunda and Guha, Kaustav and Ravishankar, Abhilash and Biswas, Sanjay K and Bain, Colin D and Jayaram, Vikram (2014) Total internal reflection Raman spectroscopy of poly(alpha-olefin) oils in a lubricated contact. In: RSC ADVANCES, 4 (42). pp. 22205-22213.

Patel, Manish and Prasad, Bhanu VV and Jayaram, Vikram (2013) Heat conduction mechanisms in hot pressed ZrB2 and ZrB2-SiC composites. In: Journal of the European Ceramic Society, 33 (10). pp. 1615-1624.

Rangaraj, Lingappa and Barman, Kanika and Divakar, Canchi and Jayaram, Vikram (2013) Reactive hot pressing of Ti-B-C and Ti-C at 1200 degrees C. In: Ceramics International, 39 (5). pp. 5955-5961.

Bobji, MS and Kailas, Satish V and Ananthasuresh, GK and Ayappa, Ganapathy and Jayaram, Vikram and Visweswariah, Sandhya S (2013) Sanjay Kumar Biswas (1945-2013). In: Current Science, 104 (12). pp. 1718-1719.

Patel, Manish and Singh, V and Reddy, JJ and Prasad, Bhanu VV and Jayaram, Vikram (2013) Densification mechanisms during hot pressing of ZrB2-20 vol.% SiC composite. In: SCRIPTA MATERIALIA, 69 (5). pp. 370-373.

Verma, Nisha and Jayaram, Vikram (2013) Detailed investigation of contact deformation in ZrN/Zr multiplayer-understanding the role of volume fraction, bilayer spacing, and morphology of interfaces. In: JOURNAL OF MATERIALS RESEARCH, 28 (22). pp. 3146-3156.

Praveena, Manimunda and Bain, Colin D and Jayaram, Vikram and Biswas, Sanjay K (2013) Total internal reflection (TIR) Raman tribometer: a new tool for in situ study of friction-induced material transfer. In: RSC ADVANCES, 3 (16). pp. 5401-5411.

Verma, Nisha and Cadambi, Sumanth and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) Micromechanisms of damage nucleation during contact deformation of columnar multilayer nitride coatings. In: ACTA MATERIALIA, 60 (6-7). pp. 3063-3073.

Patel, Manish and Reddy, JJ and Prasad, Bhanu VV and Subrahmanyam, J and Jayaram, Vikram (2012) Residual strength of hot pressed zirconium diboride (ZrB2) after exposure to high temperatures. In: Materials Science and Engineering: A, 535 . pp. 189-196.

Verma, Nisha and Jayaram, Vikram (2012) The influence of Zr layer thickness on contact deformation and fracture in a ZrN-Zr multilayer coating. In: Journal of Materials Science (full set), 47 (4). pp. 1621-1630.

Praveena, Manimunda and Jayaram, Vikram and Biswas, Sanjay K (2012) Friction between a Steel Ball and a Steel Flat Lubricated by MoS2 Particles Suspended in Hexadecane at 150 degrees C. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 51 (38). pp. 12321-12328.

Patel, Manish and Reddy, Janardhan J and Prasad, Bhanu VV and Jayaram, Vikram (2012) Strength of hot pressed ZrB2-SiC composite after exposure to high temperatures (1000-1700 degrees C). In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 32 (16). pp. 4455-4467.

Kumar, Dinesh and Gurav, Sampada and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) Synthesis and characterization of nickel/barium hexa-aluminate composite coatings. In: BULLETIN OF MATERIALS SCIENCE, 35 (6). pp. 977-988.

Jaya, Nagamani B and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) A new method for fracture toughness determination of graded (Pt,Ni)Al bond coats by microbeam bend tests. In: PHILOSOPHICAL MAGAZINE, 92 (25-27,). pp. 3326-3345.

Pal, Soupitak and Verma, Nisha and Jayaram, Vikram and Biswas, Sanjay Kumar and Riddle, Yancy (2011) Characterization of phase transformation behaviour and microstructural development of electroless Ni-B coating. In: Materials Science and Engineering A, 528 (28). pp. 8269-8276.

Mahato, Anirban and Verma, Nisha and Jayaram, Vikram and Biswas, SK (2011) Severe wear of a near eutectic aluminium-silicon alloy. In: Acta Materialia, 59 (15). pp. 6069-6082.

Paul, Arindam and Jayaram, Vikram (2011) Deformation and structural densification in Al2O3-Y2O3 glass. In: Acta Materialia, 59 (1). pp. 82-92.

Rangaraj, Lingappa and Divakar, Canchi and Jayaram, Vikram (2010) Reactive hot pressing of ZrB2-ZrCx ultra-high temperature ceramic composites with the addition of SiC particulate. In: Journal of the European Ceramic Society, 30 (15). pp. 3263-3266.

Mahato, Anirban and Perry, Thomas A and Jayaram, Vikram and Biswas, SK (2010) Pressure and thermally induced stages of wear in dry sliding of a steel ball against an aluminium-silicon alloy flat. In: Wear, 268 (9-10). pp. 1080-1090.

Krishnan, R and Mathews, Tom and Balamurugan, AK and Dash, S and Tyagi, AK and Raj, Baldev and Jayaram, Vikram (2010) Reactive Pulsed Laser Deposition of titanium nitride thin film: Optimization of process parameters using Secondary Ion Mass Spectrometry. In: Applied Surface Science, 256 (10). pp. 3077-3080.

Rangaraj, Lingappa and Divakar, Canchi and Jayaram, Vikram (2010) Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing. In: Journal of the European Ceramic Society, 30 (1). pp. 129-138.

Kavitha, Ranganathan and Jayaram, Vikram (2010) Deposition of ZnO Films by Combustion Flame Pyrolysis of Solution Precursors. In: International Journal of Applied Ceramic Technology, 7 (4). pp. 482-492.

Potnis, Prashant and Holtzinger, Jennifer and Das, Dipak and Jayaram, Vikram and Biswas, SK (2009) Study of fracture behaviour of bond coats on nickel superalloy by three-point bending of microbeams. In: Surface and Coatings Technology, 204 (5). pp. 586-592.

Patro, Debdutt and Jayaram, Vikram (2008) Kinetics of Pressureless Infiltration of Al-Mg Melts into Porous Alumina Preforms. In: Metallurgical and Materials Transactions B, 39 (1). pp. 108-115.

Math, Souvik and Horn, Roger and Jayaram, Vikram and Biswas, Sanjay K (2007) A general contact mechanical formulation of multilayered structures and its application to deconvolute thickness/mechanical properties of glue used in surface force apparatus. In: Journal of Colloid and Interface Science, 308 (2). pp. 551-561.

Boddapati, Srinivasa Rao and Rodel, Jurgen and Jayaram, Vikram (2007) Crack growth resistance (R-curve) behaviour and thermo-physical properties of $Al_2O_3$ particle-reinforced AlN/Al matrix composites. In: Composites Part A: Applied Science and Manufacturing, 38 (3). pp. 1038-1050.

Thangamani, Nithyanantham and Gandhi, Ashutosh S and Jayaram, Vikram and Chokshi, Atul H (2005) Low-Temperature High-Pressure Consolidation of Amorphous $Al_{2}O_{3}-15\hspace{5mm}{mol\%}\hspace{5mm}Y_{2}O_{3}$. In: Journal of the American Ceramic Society, 88 (10). pp. 2696-2701.

Kavitha, R and Hegde, SR and Jayaram, Vikram (2003) Oxide films by combustion pyrolysis of solution precursors. In: Materials Science and Engineering A, 359 (1-2). pp. 18-23.

Choudhury, Samrat and Gandhi, Ashutosh S and Jayaram, Vikram (2003) Bulk, Dense, Nanocrystalline Yttrium Aluminum Garnet by Consolidation of Amorphous Powders at Low Temperatures and High Pressures. In: Journal of the American Ceramic Society, 86 (2). pp. 247-251.

Bhatia, Tania and Chattopadhyay, Kamanio and Jayaram, Vikram (2001) Effect of Rapid Solidification on Microstructural Evolution in $MgO-MgAl_2O_4$. In: Journal of the American Ceramic Society, 84 (8). pp. 1873-1880.

Jayaram, Vikram and Rani, Sirisha B (2001) Soft chemical routes to the synthesis of extended solid solutions of wurtzite ZnO–MO (M=Mg,Co,Ni). In: Materials Science and Engineering A, 304-30 . pp. 800-804.

Bhatia, Tania and Chattopadhyay, K and Jayaram, Vikram (1999) Segregation in the MgO–MgAl2O4 system processed from nitrate precursors. In: Journal of Materials Research, 14 (8). pp. 3319-3327.

Bhatia, Tania and Chattopadhyay, K and Jayaram, Vikram (1999) Segregation in the $MgO-MgAl_{2}O_{4}$ system processed from nitrate precursors. In: Journal of Materials Research, 14 (8). pp. 3319-3327.

Jayaram, Vikram and Rajkumar, J and Rani, Sirisha B (1999) Synthesis of metastable, wurzite-based zinc oxide-cobalt(II) oxide solid solutions by spray pyrolysis. In: Journal of the American Ceramic Society, 82 (2). pp. 473-476.

Srinivasan, Dheepa and Jayaram, Vikram and Das, PK and Chattopadhyay, K (1998) Nanodispersed Microstructures on Laser Mixing of Al-Ni Multilayers. In: Scripta Materialia, 38 (6). pp. 857-861.

Padmapriya, P and Abinandanan, TA and Jayaram, Vikram (1997) coarsening of an interconnected microstructure in an al-al2o3 composite. In: Scripta Materialia, 37 (12). pp. 1883-1888.

Kumar, Sandeep and Jayaram, Vikram and Mani, TV and Warrier, KGK (1997) Degradation of Al2O3-�SiC-Al composites prepared by the oxidative growth of Al-alloys into SiC particulate. In: Journal of Materials Science, 32 (17). pp. 4719-4722.

Jayaram, Vikram and Manna, Rampada and Kshetrapal, Manjunath G and Sarkar, Jaydeep and Biswas, Sanjay K (1996) Microstructure control and wear of Al2O3-SiC-(Al,Si) composites made by melt oxidation. In: Journal of the American Ceramic Society, 79 (3). pp. 770-772.

Hanabe, Murali and Jayaram, Vikram and Bhaskaran, TA (1996) Growth of $Al_2O_3/Al$ Composites from Al-Zn Alloys. In: Acta Materialia, 44 (2). pp. 819-829.

This list was generated on Fri Jul 25 13:22:47 2014 IST.