ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Browse by Author

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 24.

Conference Proceedings

Mahesh, C and Deb, A and Kailas, SV and Shankar, Uma C and Kutty, TRG and Mahule, KN (2013) A STUDY INTO THE BEHAVIOR OF AN ALUMINUM FOAM UNDER COMPRESSION. In: 11th Asia-Pacific Conference on Engineering Plasticity and its Applications, DEC 05-07, 2012 , Singapore, SINGAPORE, pp. 64-67.

Conference Paper

Ghosh, M and Kar, A and Kumar, K and Kailas, SV and Das, SK and Ray, AK (2008) Evaluation of interface microstructure for friction stir welding aluminium-stainless steel plate. In: The International Conference 'INCOME', Jamshedpur, December, Jamshedpur.

Journal Article

Venukumar, S and Yalagi, SG and Muthukumaran, S and Kailas, SV (2014) Static shear strength and fatigue life of refill friction stir spot welded AA 6061-T6 sheets. In: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 19 (3). pp. 214-223.

Ghosh, M and Husain, Md M and Kumar, K and Kailas, SV (2013) Friction Stir-Welded Dissimilar Aluminum Alloys: Microstructure, Mechanical Properties, and Physical State. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (12). pp. 3890-3901.

Ghosh, M and Kar, A and Kumar, K and Kailas, SV (2012) Structural characterisation of reaction zone for friction stir welded aluminium-stainless steel joint. In: Materials Technology, 27 (2). pp. 169-172.

Ghosh, M and Kumar, K and Kailas, SV and Raychaudhuri, AK (2010) Optimization of friction stir welding parameters for dissimilar aluminum alloys. In: Materials & Design, 31 (6). pp. 3033-3037.

Kumar, K and Kailas, SV (2010) Positional dependence of material flow in friction stir welding: analysis of joint line remnant and its relevance to dissimilar metal welding. In: Science and Technology of Welding & Joining, 15 (4). pp. 305-311.

Narasimha, Roddam and Kumar, Rudra S and Prabhu, A and Kailas, SV (2007) Turbulent flux events in a nearly neutral atmospheric boundary layer. In: Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 365 (1852). pp. 841-858.

Jayalakshmi, S and Kailas, SV and Seshan, S and Kim, KB and Fleury, E (2006) Tensile strength and fracture toughness of two magnesium metal matrix composites. In: Journal of Ceramic Processing Research, 7 (3). pp. 261-265.

Jayamathy, M and Kailas, SV and Kumar, K and Seshan, S and Srivatsan, TS (2005) The compressive deformation and impact response of a magnesium alloy: influence of reinforcement. In: Materials Science & Engineering, A, 393 (1-2). pp. 27-35.

Jayalakshmi, S and Kailas, SV and Seshan, S and Kumar, K and Srivatsan, TS (2005) Damage Tolerant Magnesium Metal Matrix Composites: Influence of Reinforcement and Processing. In: Materials and Manufacturing Processes, 20 (5). pp. 747-760.

Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2005) Influence of Reinforcement and Processing on the Wear Response of Two Magnesium Alloys. In: Materials and Manufacturing Processes, 20 (2). pp. 255-271.

Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2004) Influence of reinforcement on microstructure and mechanical response of a magnesium alloy. In: Current Science, 87 (9). pp. 1218-1231.

Jayalakshmi, S and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, S (2004) Influence of processing and reinforcement on microstructure and impact behavior of magnesium alloy AM100. In: Sadhana, 29 (5). pp. 509-523.

Kailas, SV (2003) A Study of the Strain Rate Microstructural Response and Wear of Metals. In: Journal of Materials Engineering and Performance, 12 (6). pp. 629-637.

Seshan, S and Jayamathy, M and Kailas, SV and Srivatsan, TS (2003) The tensile behavior of two magnesium alloys reinforced with silicon carbide particulates. In: Materials Science and Engineering A, 363 (1-2). pp. 345-351.

Jayalakshmi, S and Kailas, SV and Seshan, S (2003) Properties of squeeze cast Mg-10Al-Mn alloy and its alumina short fibre composites. In: Journal of Materials Science, 38 (7). pp. 1383-1389.

Jayalakshmi, S and Kailas, SV and Seshan, S (2002) Tensile behaviour of squeeze cast AM100 magnesium alloy and its $Al_2O_3$ fibre reinforced composites. In: Composites Part A: Applied Science and Manufacturing, 33 (8). pp. 1135-1140.

Kailas, SV and Biswas, SK (1999) Sliding wear of copper against alumina. In: Journal of Tribology, 121 (4). 795-801 .

Kailas, SV and Biswas, SK (1997) Sliding wear of titanium. In: Transactions of the ASME: Journal of Tribology, 119 (1). pp. 31-35.

Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Flow Instabilities and fracture in Ti-6Al-4V deformed in compression at 298 K to 673 K. In: Metallurgical and materials transactions a, 25 (10). 2173-2179 .

Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Influence of initial texture on the microstructural instabilities during compression of commercial ?-Titanium at 25 °C to 400 °C. In: Metallurgical and Materials Transactions A, 25 (7). 1425 -1434 .

Kailas, SV and Prasad, YVRK and Biswas, SK (1993) Microstructural features of flow instability in α-titanium cylinders under high strain rate compression at 25°C to 400°C. In: Metallurgical Transactions. Physical Metallurgy and Material, 24 (11). pp. 2513-2520.

Narasimha, R and Kailas, SV (1990) Turbulent bursts in the atmosphere. In: Atmospheric Environment, 24 (7). pp. 1635-1645.

This list was generated on Wed Jul 30 12:55:18 2014 IST.