|Up a level|
Sanyal, A and Basu, S and Kumar, P (2014) Adsorption study of silica gel particle for improvement in design of adsorption beds used in solar driven cooling units. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 656-665.
Garg, P and Srinivasan, K and Dutta, P and Kumar, P (2014) Comparison of CO2 and steam in transcritical Rankine cycles for concentrated solar power. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 1138-1146.
Talebanpour, B and Sahaym, U and Dutta, I and Kumar, P (2014) EFFECT OF AGING ON IMPRESSION CREEP BEHAVIOR OF Pb-FREE SOLDERS. In: ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, JUL 16-18, 2013, Burlingame, CA.
Mitra, S and Srinivasan, K and Kumar, P and Murthy, SS and Dutta, P (2014) Solar driven Adsorption Desalination system. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 2261-2269.
Dwivedi, PN and Kumar , P and Bhattacharya, A and Padhi, R (2013) Lead Angle Constrained Optimal Midcourse Guidance. In: AIAA Guidance, Navigation, and Control (GNC) Conference, Guidance, Navigation, and Control and Co-located Conferences, (AIAA 2013-4533), August 19-22, 2013, Boston, Massachusetts.
Kumar, P and Talenbanpour, B and Sahaym, U and Wen, CH and Dutta, I (2012) Microstructural Evolution and Some Unusual Effects During Thermo-Mechanical Cycling of Sn-Ag-Cu Alloys. In: 13th IEEE InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) , MAY 30-JUN 01, 2012 , San Diego, CA , pp. 880-887.
Kumar, P and Lakshmi, H and Dutta, P (2009) Determination of solid fraction evolution during solidification of aluminum alloy in presence of linear electromagnetic stirring. In: International Mechanical Engineering Congress & Exposition, November 13-19, 2009, Lake Buena Vista, Florida, USA.
Kumar, P and Lakshmi, H and Dutta, P (2008) Rheocasting of A356 Alloy using Linear electromagnetic Stirring. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.
Kumar, P and Lakshmi, H and Dutta, P (2008) Solidification of A356 Alloy in a Linear Electromagnetic Stirrer. In: 10th International Conference on Semi-Solid Processing of Alloys and Composites, September 16th -18th, 2008., Aachen and Germany, pp. 563-568.
Barman, N and Kumar, P and Dutta, P (2008) Studies on Transport Phenomena in Rheocasting of Al-Si alloy in Presence of Electromagnetic Stirring. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.
Kumar, P and Lakshmi, H and Dutta, P (2007) Rheocasting of aluminium A356 alloy in a linear electromagnetic stirrer. In: The 6th Pacific Rim International Conference on Advanced Materials and Processing, , Nov. 5-9, 2007, Jeju Island, Korea.
Dutta, P and Murthy, KSS and Kumar, P (2007) Squeeze Casting and Semi-solid Forming: New Developments. In: International Conference on Aluminium (INCAL), , Nov. 21-23, 2007, Hyderabad.
Yadavalli, S and Jayaram, S and Manda, S S and Madugundu, A K and Nayakanti, D S and Tan, T Z and Bhat, R and Rangarajan, A and Chatterjee, A and Gowda, H and Thiery, J P and Kumar, P (2017) Data-Driven Discovery of Extravasation Pathway in Circulating Tumor Cells. In: SCIENTIFIC REPORTS, 7 .
Huang, Z and Kumar, P and Dutta, I and Sidhu, R and Renavikar, M and Mahajan, R (2014) Effects of Microstructure and Loading on Fracture of Sn-3.8Ag-0.7Cu Joints on Cu Substrates with ENIG Surface Finish. In: JOURNAL OF ELECTRONIC MATERIALS, 43 (12). pp. 4485-4496.
Kumar, P and Howarth, J and Dutta, I (2014) Electric current induced flow of liquid metals: Mechanism and substrate-surface effects. In: JOURNAL OF APPLIED PHYSICS, 115 (4).
Huang, Z and Kumar, P and Dutta, I and Sidhu, R and Renavikar, M and Mahajan, R (2014) Incorporation of Interfacial Intermetallic Morphology in Fracture Mechanism Map for Sn-Ag-Cu Solder Joints. In: JOURNAL OF ELECTRONIC MATERIALS, 43 (1). pp. 88-95.
Huang, Z and Kumar, P and Dutta, I and Pang, JHL and Sidhu, R (2014) A general methodology for calculating mixed mode stress intensity factors and fracture toughness of solder joints with interfacial cracks. In: ENGINEERING FRACTURE MECHANICS, 131 . pp. 9-25.
Kumar, P and Sriprakash, G and Rukmani, K and Ramesh, KP and Muthu, DVS (2013) Anomalous optical phonons in Cs-0.9(NH4)(0.1)H2AsO4: a temperature-dependent Raman study. In: AIP Advances, 3 (6). 062123_1-062123_7.
Kumar, P and Mishra, A and Watt, T and Watt, I and Bourell, DL and Sahaym, U (2013) Electromagnetic jigsaw: metal-cutting by combining electromagnetic and mechanical Forces. In: PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 6 . pp. 600-604.
Gurao, NP and Kumar, P and Sarkar, A and Brokmeier, HG and Suwas, Satyam (2013) Simulation of Deformation Texture Evolution During Multi Axial Forging of Interstitial Free Steel. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (4). pp. 1004-1009.
Das, B and Kumar, P and Rao, CNR (2012) Factors Affecting Laser-Excited Photoluminescence from ZnO Nanostructures. In: Journal of Cluster Science, 23 (3). pp. 649-659.
Lakshmi, H and Kumar, Vinay MC and Raghunath, * and Kumar, P and Ramanarayanan, V and Murthy, KSS and Dutta, P (2010) Induction reheating of A356.2 aluminum alloy and thixocasting as automobile component. In: Transactions of Nonferrous Metals Society of China, 20 (Suppl.). S961-S967.
Vaidyanathan, Kannan and Kumar, P and Reddy, CO and Deshmane, V and Somasundaram, K and Mukherjee, G (2010) ErbB-2 expression and its association with other biological parameters of breast cancer among Indian women. In: Indian Journal of Cancer, 47 (1). pp. 8-15.
Barman, N and Kumar, P and Dutta, Pradip (2009) Studies on transport phenomena during solidification of an aluminum alloy in the presence of linear electromagnetic stirring. In: Journal of Materials Processing Technology, 209 (18-19). pp. 5912-5923.
Kumar, P and Sulochana, P and Nirmala, G and Chandrashekar, R and Haridattatreya, M and Satchidanandam, V (2004) Impaired T Helper 1 Function of Nonstructural Protein 3–Specific T Cells in Japanese Patients with Encephalitis with Neurological Sequelae. In: Journal Of Infectious diseases, 189 (5). pp. 880-891.
Kumar, P and Chakraborty, S and Srinivasan, K and Dutta, P (2003) Studies on Transport Phenomena during Directional Solidification of a Noneutectic Binary Solution Cooled from the Top. In: Metallurgical and Materials Transactions B, 34 (6). pp. 899-909.
Kumar, P and Uchil, PD and Sulochana, P and Nirmala, G and Chandrashekar, R and Haridattatreya, M and Satchidanandam, V (2003) Screening for T cell-eliciting proteins of Japanese encephalitis virus in a healthy JE-endemic human cohort using recombinant baculovirus-infected insect cell preparations. In: Archives of Virology, 148 (8). pp. 1569-1591.
Chakraborty, S and Chakraborty, N and Kumar, P and Dutta, P (2003) Studies on turbulent momentum, heat and species transport during binary alloy solidification in a top-cooled rectangular cavity. In: International Journal of Heat and Mass Transfer, 46 (7). pp. 1115-1137.
Kumar, P and Chakraborty, S and Srinivasan, K and Dutta, P (2002) Rayleigh-Benard convection during solidification of an eutectic solution cooled from the top. In: Metallurgical and Materials Transactions B, 33 (4). pp. 605-612.
Kumar, P (1996) Excitation of multiple quantum coherences by a single nonselective radiofrequency pulse due to the breakdown of the high-field approximation. In: Chemical Physics Letters, 259 (5-6). pp. 611-613.
Kumar, P and Kumar, Anil (1995) Effect of Dipolar Cross Correlations on the Transverse Relaxation of Single- and Multiple-Quantum Coherences in Strongly Coupled Spin Systems. In: Journal of Magnetic Resonance, Series A, 115 (2). pp. 155-164.