ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Browse by Author

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 59.

Conference Paper

Sudarshan, * and Surappa, MK (2006) Processing and characterization of fly ash particle reinforced A356 Al composites. In: Solidification Processing of Metal Matrix Composites - Rohatgi Honorary Symposium, 2006.

Dutta, B and Mannikar, S and Surappa, MK (1996) Solidification studies in aluminium matrix composites. In: Discussion Meeting on Inorganic Matrix Composites, MAR 08-11, 1995, Bangalore, India.

Giridhar, R and Surappa, MK (1993) Effect of Aging on Impact Fracture Behavior of 2024Al-$Al_2O_3P$ Composites Made by Casting Route. In: The Ninth International Conference on Composite Materials, 1993, pp. 219-226.

Sarkar, J and Prasad, YVRK and Surappa, MK (1993) The constitutive flow behavior of 6061Al-SiCp composites at elevated temperature. In: International Conference on Composite Material, 1993, pp. 240-246.

Journal Article

Roy, Shibayan and Kannan, G and Suwas, Satyam and Surappa, MK (2015) Effect of extrusion ratio on the microstructure, texture and mechanical properties of (Mg/AZ91)(m)-SiCp composite. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 624 . pp. 279-290.

Anilchandra, AR and Surappa, MK (2013) Microstructure and tensile properties of consolidated magnesium chips. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 560 . 759-766.

Anilchandra, AR and Surappa, MK (2012) Microstructure and damping behaviour of consolidated magnesium chips. In: Materials Science and Engineering: A, 542 . pp. 94-103.

Shivamurthy, RC and Surappa, MK (2011) Tribological characteristics of A356 Al alloy-SiC(P) composite discs. In: Wear, 271 (9-10, ). pp. 1946-1950.

Anilchandra, AR and Surappa, MK (2010) Influence of tool rake angle on the quality of pure magnesium chip-consolidated product. In: Journal of Materials Processing Technology, 210 (3). pp. 423-428.

Bauri, Ranjit and Surappa, MK (2009) Processing and compressive strength of Al-Li-SiCp composites fabricated by a compound billet technique. In: Journal of Materials Processing Technology, 209 (4). pp. 2077-2084.

Bauri, Ranjit and Surappa, MK (2008) Sliding wear behavior of Al-Li-SiCp composites. In: Wear, 265 (11-12). pp. 1756-1766.

Sudarshan, M and Surappa, MK and Ahn, Dongjoon and Raj, Rishi (2008) Nanoceramic-Metal Matrix Composites by In-Situ Pyrolysis of Organic Precursors in a Liquid Melt. In: Metallurgical and Materials Transactions A, 39A (13). pp. 3291-3297.

Sudarshan, * and Surappa, MK (2008) Dry sliding wear of fly ash particle reinforced A356 Al composites. In: Wear, 265 (3-4). pp. 349-360.

Sudarshan, * and Surappa, MK (2008) Synthesis of fly ash particle reinforced A356 Al composites and their characterization. In: Materials Science and Engineering: A, 480 (1-2). pp. 117-124.

Bauri, Ranjit and Surappa, MK (2007) Processing and properties of $Al-Li-SiC_p$ composites. In: Science and Technology of Advanced Materials, 8 (6). pp. 494-502.

Uyyuru, RK and Surappa, MK and Brusethaug, S (2007) Tribological behavior of $Al-Si/SiC_p$ composites/automobile brake pad system under dry sliding conditions. In: Tribology International, 40 (2). pp. 365-373.

Khana, Kirity Bhusan and Kutty, TRG and Surappa, MK (2006) Hot hardness and indentation creep study on Al5% Mg alloy matrixB4C particle reinforced composites. In: Materials Science And Engineering A, 427 (1-2). pp. 76-82.

Bauri, R and Pancholi, V and Samajdar, I and Surappa, MK (2005) Relating microtexture and dynamic micro hardness in an extruded AA8090 alloy and AA8090-8 vol% $SiC_{p}$ composite. In: Science and Technology of Advanced Materials, 6 (8). pp. 933-938.

Bauri, Ranjit and Surappa, MK (2005) Damping Behavior of $Al-Li-SiC_p$ Composites Processed by Stir Casting Technique. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 36 (3). pp. 667-673.

Bauri, Ranjit and Surappa, MK (2005) Investigations on serrated flow in 8090 Al alloy and 8090 Al-SiCp composites occurring during dynamic ultra low load micro hardness (DUH) indentation. In: Materials Science & Engineering, A, 393 (1-2). pp. 22-26.

Surappa, MK (2003) Aluminium Matrix Composites: Challenges and Opportunities. In: Sadhana, 28 (1-2). pp. 319-334.

Johannesson, B and Ogin, SL and Surappa, MK and Tsakiropoulos, P and Brynjolfsson, S and Thorbjornsson, IO (2001) Effect of reinforcement geometry on matrix stresses in three aluminium metal matrix composite systems. In: Scripta Materialia, 45 (8). pp. 993-1000.

Iwai, Y and Honda, T and Miyajima, T and Iwasaki, Y and Surappa, MK and Xu, JF (2000) Dry sliding wear behavior of Al2O3 fiber reinforced aluminum composites. In: Composites Science and Technology, 60 (9). pp. 1781-1789.

Saravanan, RA and Surappa, MK (2000) Fabrication and characterisation of pure magnesium-30 vol.% $SiC_P$ particle composite. In: Materials Science & Engineering A, 276 (1-2). pp. 108-116.

Iwai, Y and Honda, T and Miyajima, T and Iwasaki, Y and Surappa, MK and Xu, JF (2000) Dry sliding wear behavior of $Al_{2}O_{3}$ fiber reinforced aluminum composites. In: Composites Science and Technology, 60 (09). pp. 1781-1789.

Karmakar, G and Sen, R and Meikap, AK and Chattopadhyay, SK and Chatterjee, SK and Surappa, MK (1999) The studies on micro-structural defects in deformed composite matrix of Al-Si-Mg and SiC. In: Japanese Journal of Applied Physics, 38 (11). pp. 6450-6453.

Nagarajan, Sucheta and Dutta, B and Surappa, MK (1999) The effect of SiC particles on the size and morphology of eutectic silicon in cast A356/SiCp composites. In: Composites Science and Technology, 59 (6). 897-902 .

Bhargava, NRMR and Samajdar, I and Ranganathan, S and Surappa, MK (1998) Role of cold work and SiC reinforcements on the beta '/beta precipitation in Al-10 pct Mg alloy. In: Metallurgical and Materials Transactions A, 29 (11). pp. 2835-2842.

Pan, J and Surappa, MK and Saravanan, RA and Liu, BW and Yang, DM (1998) Fabrication and characterization of $SiC/MoSi_2 $composites. In: Materials Science and Engineering A, 244 (02). pp. 191-198.

Dutta, B and Surappa, MK (1998) Directional dendritic solidification of a composite slurry: Part I. Dendrite morphology. In: Metallurgical and Materials Transactions A, 29 (4). pp. 1319-1327.

Dutta, B and Surappa, MK (1998) Directional dendritic solidification of a composite slurry: Part II. Particle distribution. In: Metallurgical and Materials Transactions A, 29 (4). pp. 1329-1339.

Saravanan, RA and Samajdar, I and Surappa, MK (1998) Microstructural characterisation of the subsurface plastic zone formed during erosion of A356 AI alloy and composites. In: Wear, 215 (1-2). pp. 223-231.

Gupta, M and Surappa, MK and Qin, S and Tham, LM (1998) Regarding the effect of aging heat treatment on the failure behaviour of a SiC reinforced Al based metal matrix composite. In: Indian Journal of Engineering and Materials Sciences, 5 (1). pp. 1-8.

Dutta, B and Samajdar, I and Surappa, MK (1998) Particle redistribution and matrix microstructure evolution during hot extrusion of cast SiCp reinforced aluminium alloy matrix composites. In: Materials Science and Technology, 14 (1). pp. 36-46.

Dutta, B and Surappa, MK (1998) Microstructure evolution during multidirectional solidification of Al-Cu-SiC composites. In: Composites Part A, 29A (5-6). pp. 565-573.

Dutta, B and Surappa, MK (1997) Studies on age-hardening characteristics of ceramic particle/matrix interfaces in Al-Cu-SiCp composites using ultra low-load-dynamic microhardness measurements. In: Journal of Materials Research, 12 (10). pp. 2773-2778.

Gupta, M and Surappa, MK and Qin, S (1997) Effect of interfacial characteristics on the failure-mechanism mode of a SiC reinforced Al based metal-matrix composite. In: Journal of Materials Processing Technology, 67 (1-3). pp. 94-99.

Ravikiran, A and Surappa, MK (1997) Effect of sliding speed on wear behaviour of A356 Al-30 wt.% $SiC_p MMC$. In: Wear, 206 (1-2). pp. 33-38.

Ravikiran, A and Surappa, MK (1997) Effect of sliding speed on wear behaviour of A356 Al-30 wt.%SiCp MMC. In: Wear, 206 (1-2). pp. 33-38.

Ravikiran, A and Surappa, MK (1997) Oscillations in coefficient of friction during dry sliding of A356 Al-30% wt SiCp MMC against steel. In: Scripta Materialia, 36 (1). pp. 95-98.

Saravanan, RA and Surappa, MK and Bai, BNP (1997) Erosion of A356 $Al-SiC_{\mu}$ composites due to multiple particle impact. In: Wear, 202 (2). pp. 154-164.

Surappa, MK (1997) Microstructure evolution during solidification of DRMMCs (discontinuously reinforced metal matrix composites): State of art. In: Journal of Materials Processing Technology, 63 (1-3). pp. 325-333.

Manna, R and Sarkar, J and Surappa, MK (1996) Effect of second phase precipitates on recovery and recrystallization behaviour of cold-worked AI2024-SiCp composites. In: Journal of Materials Science, 31 (6). pp. 1625-1631.

Gupta, M and Surappa, MK (1995) Effect of weight percentage of SiC particulates on the ageing behaviour of 6061/SiC metal matrix composites. In: Journal of Materials Science Letters, 14 (18). pp. 1283-1285.

Gupta, M and Surappa, MK (1995) Effect of Increase in Heterogeneous Nucleation Sites on the Aging Behavior of 6061/SiC Metal Matrix Composites. In: Materials Research Bulletin, 30 (8). pp. 1023-1030.

Sarkar, J and Prasad, YVRK and Surappa, MK (1995) Optimization of hot workability of an Al-Mg-Si alloy using processing maps. In: Journal of Materials Science (full set), 30 (11). pp. 2843-2848.

Narayan, Manish and Surappa, MK and Bai, Pramila BN (1995) Dry sliding wear of Al alloy 2024-Al203 particle metal matrix composites. In: Wear, 181 (part 2). pp. 563-570.

sarkar, J and Surappa, MK (1994) Serrated yielding in thermomechanically processed 6061 $Al-SiC_p$ composite. In: Journal of Materials Science Letters, 13 (11). pp. 835-837.

Dhandapani, SP and Jayaram, V and Surappa, MK (1994) Growth and microstructure of $Al_2O_3-SiC-Si(Al)$ composites prepared by reactive infiltration of silicon carbide preforms. In: Acta Metallurgica et Materialia, 42 (3). pp. 649-656.

Surappa, MK (1993) On the nature of particle flow during extrusion of cast 6061 Al/SiCP composites. In: Journal of Materials Science Letters, 12 (16). pp. 1272-1273.

Surappa, MK and Sivakumar, P (1993) Fracture Toughness Evaluation of $2040-Al/Al_2O_3$ Particulate Composites by Instrumented Impact. In: Composites Science and Technology, 46 (3). pp. 287-292.

Srinivasan, D and Surappa, MK (1992) Effect of Iron Impurity and Thermomechanical Processing on the Age-Hardening Behaviour of 6061 $Al-SiC_p$ MMC Produced by Casting Route. In: Scripta Metallurgica et Materialia, 27 (9). pp. 1139-1144.

Baia, Pramila BN and Ramasesh, BS and Surappa, MK (1992) Dry sliding wear of A356-Al-SiCp composites. In: Wear, 157 (2). pp. 295-304.

Aradhya, KSS and Surappa, MK (1991) Estimation of mechanical properties of 6061 Al---SiCp composites using finite element method. In: Scripta Metallurgica et Materialia, 25 (4). 817-822 .

Bhat, MSN and Surappa, MK and Nayak, Sudhaker HV (1991) Corrosion behaviour of silicon carbide particle reinforced 6061/AI alloy composites. In: Journal of Materials Science, 26 (18). pp. 4991-96.

Brown, CA and Surappa, MK (1988) The machinability of a cast aluminium alloy-graphite particle composite. In: Materials Science and Engineering: A, 102 (1). pp. 31-37.

Krishnan, BP and Surappa, MK and Rohatgi, PK (1981) The UPAL process: a direct method of preparing cast aluminium alloy-graphite particle composites. In: Journal of Materials Science, 16 (5). p. 1209.

Surappa, MK and Rohatgi, PK (1978) Properties of Aluminum-Graphite Particle Composites Made using Copper Coated Graphite. In: Transactions of the Indian Institute of Metals, 31 (5-6). p. 488.

Editorials/Short Communications

Surappa, MK (2016) World university rankings and subject ranking in engineering and technology (2015-2016): a case for greater transparency. In: CURRENT SCIENCE, 111 (3). pp. 461-464.

This list was generated on Thu Sep 19 00:06:04 2019 IST.