ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Browse by Author

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 22.

Conference Paper

Venugopal, S and Narayanan, G (2007) An Overmodulation Scheme for Vector Controlled Induction Motor Drives. In: PEDES '06. International Conference on Power Electronics, Drives and Energy Systems, 2006., 12-15 Dec. 2006, New Delhi .

Journal Article

Modi, Manoj Kumar and Venugopal, S and Narayanan, G (2013) Space vector-based analysis of overmodulation in triangle-comparison based PWM for voltage source inverter. In: SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 38 (3). pp. 331-358.

Raj, Arul K and Karthikeyan, M and Alphonsa, J and Satish, V K and Venugopal, S (2013) WEAR AND SLIDING-FRICTION CHARACTERISTICS OF STAINLESS STEEL SS316LN WITHOUT A COATING AND WITH A CrN COATING AT ELEVATED TEMPERATURES AND IN A VACUUM. In: METALLURGIST, 57 (7-8). pp. 727-735.

Devaraju, A and Perumal, Elaya A and Alphonsa, J and Kailas, Satish V and Venugopal, S (2012) Sliding wear behavior of plasma nitrided Austenitic Stainless Steel Type AISI 316LN in the temperature range from 25 to 400 degrees C at 10(-4) bar. In: WEAR, 288 . pp. 17-26.

Devaraju, A and Elayaperumal, A and Alphonsa, J and Kailas, Satish V and Venugopal, S (2012) Microstructure and dry sliding wear resistance evaluation of plasma nitrided austenitic stainless steel type AISI 316LN against different sliders. In: SURFACE & COATINGS TECHNOLOGY, 207 . pp. 406-412.

Sivaprasad, PV and Venugopal, S and Venugopal, Sridhar and Maduraimuthu, V and Vasudevan, M and Mannan, SL and Prasad, YVRK and Chaturvedi, RC (2003) Validation of processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using hot forging and rolling tests. In: Journal of Materials Processing Technology, 132 (1-3). 262-268 .

Venugopal, S and Mannan, SL and Prasad, YVRK (1997) Instability map for cold and warm working of as-cast 304 stainless steel. In: Journal of Materials Processing Technology, 65 (1-3). pp. 107-115.

Venugopal, S and Mannan, SL and Prasad, YVRK (1997) On the modelling of grain size during hot working of stainless steels type AISI 304 and 316. In: Journal of Materials Science Letters, 16 (2). pp. 137-142.

Venugopal, S and Vasudevan, M and Venugopal, Sridhar and Sivaprasad, PV and Jha, SK and Pandey, P and Mannan, SL and Prasad, YVRK (1996) Industrial validation of processing maps of 316L stainless steel using hot forging, rolling, and extrusion. In: Materials Science and Technology, 12 (11). pp. 955-962.

Venugopal, S and Venugopal, Sridhar and Sivaprasad, PV and Vasudevan, M and Mannan, SL and Jha, SK and Pandey, P and Prasad, YVRK (1996) Validation of processing maps for 304L stainless steel using hot forging, rolling and extrusion. In: Journal of Materials Processing Technology, 99 (04). pp. 343-350.

Venugopal, S and Mannan, SL and Prasad, YVRK (1996) Influence of strain rate and state-of-stress on the formation of ferrite in stainless steel type AISI 304 during hot working. In: Materials Letters, 26 (3). pp. 161-165.

Venugopal, S and Mannan, SL and Prasad, YVRK (1996) Optimization of cold and warm workability in 304 stainless steel using instability maps. In: Metallurgical and Materials Transactions A, 27 (1). pp. 119-126.

Venugopal, S and Tyagi, AK and Krishan, K and Mannan, SL and Prasad, YVRK (1995) Influence of carbide particles on the dynamic recrystallization of as-cast 304 stainless steel: a study using secondary ion mass spectrometric (SIMS) analysis. In: Materials Letters, 25 (5-6). pp. 245-248.

Venugopal, S and Mannan, SL and Prasad, YVRK (1995) Optimization of cold and warm workability in stainless steel type AISI 316L using instability maps. In: Journal of Nuclear Materials, 227 (1-2). pp. 1-10.

Venugopal, S and Ravishankar, C and Mannan, SL and Prasad, YVRK (1994) Comments on the paper entitled “Microstructural features of a type 304L stainless steel deformed at 1473 K in the strain rate interval 10−3 to 102 s−1”. In: Scripta Metallurgica et Materialia, 30 (12). 1611-1616 .

Venugopal, S and Ravishankar, C and Mannan, SL and Prasad, YVRK (1994) Microstructural features of a type 304L stainless steel deformed at 1473 K in the strain rate interval 10−3 to 102 s−1. In: Scripta Metallurgica et Materialia, 30 (12). 1611-1616 .

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for cold and hot working of as-cast stainless steel type AISI 304. In: Journal of Materials Science Letters, 12 (23). pp. 1875-1878.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Criteria for prediction of flow instabilities and microstructural manifestations during warm working of AISI 304L stainless steel. In: Materials Science and Technology, 9 (11). pp. 1021-1030.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Influence of cast versus wrought microstructure on the processing map for hot working of stainless steel type AISI 304. In: Materials Letters, 17 (6). pp. 388-392.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for hot working of stainless steel type AISI 316L. In: Materials Science and Technology, 9 (10). pp. 899-906.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for mechanical working of stainless steel type AISI 316 L. In: Scripta Metallurgica et Materialia, 28 (6). pp. 715-720.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Influence of state of stress on the processing map for hot working of stainless steel type AISI 304L: compression vs. torsion. In: Materials Science and Engineering: A, 160 (1). pp. 63-69.

This list was generated on Wed Apr 16 22:34:28 2014 IST.