ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Items where Subject is "Division of Mechanical Sciences > Mechanical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators Name | Item Type
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y
Number of items at this level: 1601.

Krishnan, BP and Surappa, MK and Rohatgi, PK (1981) The UPAL process: a direct method of preparing cast aluminium alloy-graphite particle composites. In: Journal of Materials Science, 16 (5). p. 1209.

Madhusudhan, K and Narasimhan, MV and Ravikrishna, RV (2006) New cyclone separator-based prefilter design for internal combustion engine applications. Part 1: experiments and simulation. In: Proceedings of the Institute of Mechanical Engineers Part C -Journal of Mechanical Engineering Science, 220 (9). pp. 1353-1362.

Mruthyunjaya, TS (1987) A brief report on the national conference on machines and mechanisms held at Bangalore, Indiastar. In: Mechanism and Machine Theory, 22 (2). pp. 105-106.

Murthy, N Srinivasa and Rao, P Raghavendra (1984) Photoelastic determination of mode i stress intensity factor in tensile strips—effect of crack length. In: Engineering Fracture Mechanics, 20 (3). pp. 475-478.

Murthy, N Srinivasa and Rao, P.Raghavendra (1985) Photoelastic parametric studies of mode I stress intensity factors. In: Engineering Fracture Mechanics, 22 (3). pp. 527-532.

Rao, Achuth and Arakeri, Jaywant H (1998) Integral analysis applied to radial film flows. In: International Journal of Heat and Mass Transfer, 41 (18). pp. 2757-2767.

Varma, Siva Prasad N and Narasimhan, R and Luo, Alan A and Sachdev, AK (2007) An analysis of localized necking in aluminium alloy tubes during hydroforming using a continuum damage model. In: International Journal of Mechanical Sciences, 49 (2). pp. 200-209.

Venkatesh, Prabha (1981) Influence of validation schemes in a laser Doppler anemometer period timing device for frequency measurement. In: Journal Of Physics E-Scientific Instruments, 14 (5). pp. 587-592.

A

ANANTHASURESH, GK and KRAMER, SN (1992) KINEMATIC SYNTHESIS AND ANALYSIS OF THE RACK AND PINION MULTIPURPOSE MECHANISM. In: ASME, 114 (3). pp. 428-432.

Abani, N and Bakshi, S and Ravikrishna, RV (2007) Multi-dimensional modelling of spray, in-cylinder air motion and fuel–air mixing in a direct-injection engine. In: Sadhana, 32 (5). pp. 597-617.

Abass, HA and Raman, N and Narasimhan, MV (1994) Fuel drop size measurement in a carburetted induction system with 2 throttling methods. In: International journal of turbo and jet engines, 11 (4). 315 -325 .

Abraham, Glomin Thomas and Chatterjee, Anindya (2003) Approximate Asymptotics for a Nonlinear Mathieu Equation Using Harmonic Balance Based Averaging. In: Nonlinear Dynamics, 31 (4). pp. 347-365.

Abraham, Glomin Thomas and Chatterjee, Anindya and Menon, AG (2004) Escape velocity and resonant ion dynamics in Paul trap mass spectrometers. In: International Journal of Mass Spectrometry, 231 (1). pp. 1-16.

Adabala, Ramachandra Rao and Srinivasan, Usha (1995) Peristaltic pumping in a circular tube in the presence of an eccentric catheter. In: Journal of Biomechanical Engineering, 117 (4). pp. 448-454.

Adams, Michael J and Biswas, Sanjay K and Briscoe, Brian J and Sinha, Sujeet K (1992) A two Roll Mill as a Rheomer for Pastes. In: MRS Proceedings, 289 . pp. 245-250.

Adhikary, N and Gurumoorthy, B (1999) Construction of trimmed surface patches from unstructured set of points. In: Proceedings of IFIP TC5/WG5.10 and CSI International Conference on Visual Computing (ICVC99), 23-26 Feb. 1999, Goa, India, pp. 78-87.

Adinarayan, TV and Narasimhan, MV (1990) Evaluation of Displacement-Time Characteristics of Stirling Engine Drive Mechanisms. In: Proceedings of the 25th Intersociety Energy Conversion Engineering Conference, 1990. IECEC-90, 12-17 August, Reno, Nevada, Vol.5, 430-435.

Adoni, Abhijit A and Ambirajan, Amrit and Jasvanth, VS and Kumar, D Nagesh and Dutta, Pradip (2010) Theoretical Studies of Hard Filling in Loop Heat Pipes. In: Journal of Thermophysics and Heat Transfer, 24 (1). pp. 173-183.

Adoni, Abhijit A and Ambirajan, Amrit and Jasvanth, VS and Kumar, Dinesh and Dutta, Pradip (2009) Effects of mass of charge on loop heat pipe operational characteristics. In: Journal Of Thermophysics And Heat Transfer, 23 (2). pp. 346-355.

Adoni, Abhijit A and Ambirajan, Amrit and Jasvanth, VS and Kumar, D and Dutta, Pradip and Srinivasan, K (2007) Thermohydraulic Modeling of Capillary Pumped Loop and Loop Heat Pipe. In: Journal of Thermophysics and Heat Transfer, 21 (2). pp. 410-421.

Adoni, Abhijit A and Ambirajan, Amrit and Jasvanth, VS and Kumar, Nagesh and Dutta, Pradip (2010) Theoretical and Experimental Studies on an Ammonia-Based Loop Heat Pipe With a Flat Evaporator. In: IEEE Transactions on Components and Packaging Technologies, 33 (2). pp. 478-487.

Adoni, Abhijit A and Vaidya, Jasvanth S and Ambirajan, Amrit and Kumar, Dinesh and Krishnaswamy, Badarinarayana and Dutta, Pradip (2012) Evaporation Heat Transfer Coefficient in a Capillary Pumped Loop and Loop Heat Pipe for Different Working Fluids. In: Heat Transfer Engineering, 33 (9, SI). pp. 765-774.

Agarwal, Krishna Kant and Krishna, S and Ravikrishna, RV (2013) Mixing enhancement in a compact trapped vortex combustor. In: Combustion Science and Technology, 185 (3). pp. 363-378.

Agarwal, Krishna Kant and Ravikrishna, RV (2011) Experimental and Numerical Studies in a Compact Trapped Vortex Combustor: Stability Assessment and Augmentation. In: Combustion Science and Technology, 183 (12). pp. 1308-1327.

Agarwal, Krishna Kant and Ravikrishna, RV (2011) Flow-acoustic Characterisation of a Cavity-based Combustor Configuration. In: Defence Science Journal, 61 (6). pp. 523-528.

Agarwal, Krishna Kant and Ravikrishna, RV (2012) Validation of a Modified Eddy Dissipation Concept Model for Stationary and Nonstationary Turbulent Diffusion Flames. In: Combustion Science and Technology, 184 (2). pp. 151-164.

Agrawal, M and Ananthasuresh, GK (2007) On Including Manufacturing Constraints in the Topology Optimization of Surface-Micromachined Structures. In: 7th World Congress of Structural and Multidisciplinary Optimization, COEX Seoul, , 21-25 May, 2007, South Korea.

Agrawal, Vaibhav and Kollimada, Somanna A and Byju, Achu G and Gundiah, Namrata (2013) Regional variations in the nonlinearity and anisotropy of bovine aortic elastin. In: BIOMECHANICS AND MODELING IN MECHANOBIOLOGY, 12 (6). pp. 1181-1194.

Ahmad, Babar and Pratap, Rudra (2011) Analytical Evaluation of Squeeze Film Forces in a CMUT With Sealed Air-Filled Cavity. In: IEEE Sensors Journal, 11 (10). pp. 2426-2431.

Ahmad, Babar and Pratap, Rudra (2010) Elasto-Electrostatic Analysis of Circular Microplates Used in Capacitive Micromachined Ultrasonic Transducers. In: IEEE Sensors Journal, 10 (11). pp. 1767-1773.

Ahmad , Babar and Pratap, Rudra (2009) The Effect of Evacuated Backside Cavity on the Dynamic Characteristics of a Capacitive Micromachined Ultrasonic Transducer. In: International Conference on MEMS (ICMEMS 2009), January 3-5, 2009, IIT Madras.

Akkimaradi, BS and Prasad, M and Dutta, P and Srinivasan, K (2002) Effect of packing density and adsorption parameters on the throughput of a thermal compressor. In: Carbon, 40 (15). pp. 2855-2859.

Akkimaradi, Basavaraj S and Prasad, Madhu and Dutta, Pradip and Saha, Bidyut Baran and Srinivasan, Kandadai (2009) Adsorption of Nitrogen on Activated Carbon-Refit of Experimental Data and Derivation of Properties Required for Design of Equipment. In: Journal of Chemical & Engineering Data, 54 (8). 2291 -2295.

Akkimaradi, Basavaraj S and Prasad, Madhu and Srinivasan, Kandadai and Dutta, Pradip (2001) Adsorption of 1,1,1,2-Tetrafluoroethane on Activated Charcoal. In: Journal of Chemical & Engineering Data, 46 (2). pp. 417-422.

Alam, M and Arakeri, VH (1993) Observations on transition in plane bubble plumes. In: Journal of Fluid Mechanics, 254 . pp. 363-374.

Alam, Meheboob and Arakeri, VH and Nott, PR and Goddard, JD and Herrmann, HJ (2005) Instability-Induced Ordering, Universal Unfolding and the Role of Gravity in Granular Couette Flow. In: Journal Of Fluid Mechanics, 523 . pp. 277-306.

Alam, Meheboob and Nott, Prabhu R (1998) Stability of plane Couette flow of a granular material. In: Journal of Fluid Mechanics, 377 . pp. 99-136.

Alam, Meheboob and Nott, Prabhu R (1997) The influence of friction on the stability of unbounded granular shear flow. In: Journal of Fluid Mechanics, 343 . pp. 267-301.

Alle, Mythri and Varadarajan, Keshavan and Fell, Alexander and Nandy, SK (2009) Compiling Techniques for Coarse Grained Runtime Reconfigurable Architectures. In: 5th International Workshop on Applied Reconfigurable Computing, Mar 16-18, 2009, Karlsruhe, Germany.

Alwan, A and Ananthasuresh, GK (2006) Coupled electrostatic-elastic analysis for topology optimization using material interpolation. In: International MEMS Conference 2006, MAY 09-12, 2006, Singapore, SINGAPORE, pp. 264-270.

Alwan, Aravind and Ananthasuresh, GK (2006) Topology Optimization of Micromachined Structures with Surface Micromachining Manufacturing Constraints. In: CD-ROM Proceedings of the ASME International Design Engineering and Technical Conferences, September 10–13 2006, Philadelphia, USA.

Amarnath, S and Simha, KRY (1998) Tomographic data acquisition in axisymmetric specimens. In: Experimental Techniques, 22 (2). pp. 21-25.

Amarnath, S and Simha, KRY and Srinath, LS and Godbole, PB (1992) An integrated retardation method for an axisymmetric thermoelastic problem. In: Journal of Thermal Stresses, 15 (1). pp. 39-52.

Amarnath, S and Simha, KRY (1996) Torsion of half-space with lined cylindrical hole. In: Mechanics Research Communications, 23 (3). pp. 267-275.

Ambirajan, Amrit and Adoni, Abhijit A and Vaidya, Jasvanth S and Rajendran, Anand A and Kumar, Dinesh and Dutta, Pradip (2012) Loop Heat Pipes: A Review of Fundamentals, Operation, and Design. In: Heat Transfer Engineering, 33 (4-5). pp. 387-405.

Ameen, Muhsin M and Ravikrishna, RV (2011) An EDC-based turbulent premixed combustion model. In: Combustion Theory and Modelling, 15 (5). pp. 607-622.

Amini Manesh, Navid and Basu, Saptarshi and Kumar, Ranganathan (2011) Modeling of a reacting nanofilm on a composite substrate. In: Energy, 36 (3). pp. 1688-1697.

Anand, SV and Arvind, K and Bharath, P and Mahapatra, D Roy (2010) Energy harvesting using ionic electro-active polymer thin films with Ag-based electrodes. In: Smart Materials and Structures, 19 (4).

Anand, TNC and Mohan, Madan A and Ravikrishna, RV (2012) Spray characterization of gasoline-ethanol blends from a multi-hole port fuel injector. In: FUEL, 102 . pp. 613-623.

Anand, TNC and Ravikrishna, RV (2006) Modeling of Fuel Transport in the Intake Manifold of a Single Cylinder Four-Stroke Engine: Carburetion vs. Port Fuel Injection. In: 18th National & 7th ISHMT-ASME Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati, India.

Anand, V and Ghosh, S and Ghosh, M and Rao, GM and Railkar, R and Dighe, RR (2011) Surface modification of PDMS using atmospheric glow discharge polymerization of tetrafluoroethane for immobilization of biomolecules. In: Applied Surface Science, 257 (20). pp. 8378-8384.

Ananthasuresh, GK (2008) Systematic Synthesis Methods. [Book Chapter]

Ananthasuresh, GK and Howell, Larry L (2005) Mechanical Design of Compliant Microsystems-A Perspective and Prospects. In: Journal of Mechanical Design, 127 (4). pp. 736-738.

Ananthasuresh, GK (2001) Design of fully rotatable, roller-crank-driven, cam mechanisms for arbitrary motion specifications. In: PERGAMON-ELSEVIER SCIENCE LTD, 36 (4). pp. 445-467.

Ananthasuresh, GK (2006) Protein sequence design on the basis of topology optimization techniques -Using continuous modeling of discrete amino acid types. In: IUTAM Symposium on Topological Design Optimization of Structures, Machines and Materials,, Oct 2005, Copenhagen, Denmark, pp. 455-466.

Ananthasuresh, GK (2007) Topology Optimization of Microsystems Devices Including Micromachining Constraints. In: 10th International Conference on Advanced Materials,, 8-13 October, 2007, Bangalore.

Ananthasuresh, GK and Alwan, Aravind (2006) Topology Optimization of Electrostatically Actuated Micromechanical Structures with Accurate Electrostatic Modeling of the Interpolated Material Model. In: CD-ROM Proceedings of the ASME International Design Engineering and Technical Conferences, September 10–13 2006, Philadelphia, USA.

Ananthasuresh, GK and Kramer, SN (1992) Kinematic Synthesis and Analysis of the Rack and Pinion Multi-Purpose Mechanism. In: ASME, 114 (3). pp. 428-432.

Anantheshwara, K and Selvan, K Arul and Mishra, Raja K and Bobji, MS (2009) In situ transmission electron microscopy study of deformation of an aluminum alloy tribolayer. In: Scripta Materialia, 60 (8). pp. 623-626.

Anantheshwara, K and Bobji, MS (2007) Frictional Behaviour of Inertial Slider. In: Procedings of NCRSME07, , 2007, Kanpur, India.

Anantheshwara, K and Bobji, MS (2010) In situ transmission electron microscope study of single asperity sliding contacts. In: Tribology International, 43 (5-6, S). pp. 1099-1103.

Anantheshwara, K and Bobji, MS (2012) Nanoscale wear experiments in Transmision electron microscope. In: International Conference On Nano Science and Technology, 20th to 23rd January 2012, Hyderabad, India.

Anantheshwara, K and Lockwood, AJ and Mishra, Raja K and Inkson, BJ and Bobji, MS (2012) Dynamical Evolution of Wear Particles in Nanocontacts. In: Tribology Letters, 45 (2). pp. 229-235.

Anantheshwara, K and Murali, NS and Bobji, MS (2008) Effect of friction on the performance of inertial slider. In: Sadhana, 33 (3). pp. 221-226.

Angirasa, D and Srinivasan, J (1989) Natural convection flows due to the combined buoyancy of heat and mass diffusion in a thermally stratified medium. In: Journal of Heat Transfer, 111 (3). pp. 657-663.

Angirasa, D and Sarma, PK (1988) A numerical study of laminar axisymmetric plumes due to the combined buoyancy of heat and mass diffusion. In: Applied Scientific Research, 45 (4). pp. 339-352.

Angirasa, D and Srinivasan, J (1992) Natural Convection Heat Transfer From an Isothermal Vertical Surface to a Stable Thermally Stratified Fluid. In: Journal of Heat Transfer, 114 (4). pp. 917-923.

Anil, KM and Panda, Sunita and Das, Rajat Kumar and Pratap, Rudra (2009) Low Level Signal Measure-ments for Piezoresistive and Capacitive MEMS Sensor. In: International Conference on MEMS (ICMEMS 2009), January 3-5, 2009, IIT Madras.

Anindya, Chatterjee (2009) A Brief Introduction to Nonlinear Vibrations. [Teaching Resource] (Unpublished)

Anirudhan, P and Menezes, Pradeep L and Kailas, Satish V (2006) Deduction of a parameter characterizing the plowing nature of surfaces from sliding experiments. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Anirudhan, P and Menezes, Pradeep L and Kailas, Satish V (2008) Tribological characterisation of surfaces from the friction point of view. In: 9th Biennial 1ASME Conference on Engineering Systems Design and Analysis (ESDA 2008), July 7-9, Haifa, Israel., July 7-9, Haifa.

Annamalai, K and Rao, VK and Sreenath, AV (1971) Distribution of products around a burning droplet: an analytical approach. In: Combustion and Flame, 16 (3). pp. 287-294.

Anuradha, Sanyal and Pradip, Dutta and Srinivasan, K (2008) Numerical Study Of Heat Transfer From Pin Fin Heat Sink Using Steady And Pulsated Impinging Jets. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Aradhya, KSS and Murthy, NS and Srinath, LS (1985) Influence of Elastic-Constants on Mode-I Stress-Intensity Factors in 3-Dimensional Crack Problems. In: Engineering Fracture Mechanics, 22 (6). pp. 939-950.

Aradhya, KSS and Surappa, MK (1991) Estimation of mechanical properties of 6061 Al---SiCp composites using finite element method. In: Scripta Metallurgica et Materialia, 25 (4). 817-822 .

Arakeri, VH (1988) Analysis Of Traveling Bubble Cavitation Inception Data. In: Indian Journal of Technology Indian J Tech, 26 (2). pp. 99-103.

Arakeri, JH (2006) From Convection in a closed cavity, Nu~Ra**1/3 limit, to convection in an open ended cavity Nu~Ra**1/2 limit. In: Conference and Euromech Colloquium 480 on High Rayleigh Number Convection, 4-8 Sept 2006, ICTP, Trieste Italy.

Arakeri, Jaywant and Srinivasan, Usha and Sreenivas, KR and Simha, RV (2008) The earth air tunnel (EAT) system. In: ACREX, India 2008. Towards a greener future.

Arakeri, Jaywant H and Avila, Fransisco E and Dada, Jorge M and Tovar, Ramon O (2000) Convection in a long vertical tube due to unstable stratification - A new type of turbulent flow? In: Current Science, 79 (6). pp. 859-866.

Arakeri, Jaywant H and Cholemari, Murali R (2008) Homogeneous buoyancy driven turbulence in a vertical tube; natural convection analog of pressure driven pipe flow. In: 19th National and 8th ISHMT-ASME Heat and Mass Transfer Conference, JNTU, Hyderabad, India , Hyderabad.

Arakeri, Jaywant H and Cholemari, Murali R (2009) Shear-free turbulence sustained by buoyancy (Invited Talk). In: IISc-Centernary International Conference and Exhibition on Aerospace Engineering , 18-22 May 2009.

Arakeri, Jaywant H and Das, Debopam and Srinivasan, J (2000) Bifurcation in a buoyant horizontal laminar jet. In: Journal of Fluid Mechanics, 412 . pp. 61-73.

Arakeri, Jaywant H and Das, SP and Srinivasan, Usha (2006) Localised instability in unsteady separation bubbles. In: 6th IUTAM Symposium on Laminar-Turbulent Transition, DEC 13-17, 2004, Bangalore, INDIA.

Arakeri, Jaywant H and Dewan, Anupam (1996) Comparison of four turbulence models for wall-bounded flows affected by transverse curvature. In: AIAA Journal, 34 (4). pp. 842-844.

Arakeri, Jaywant H and Shukla, Ratnesh K (2013) A unified view of energetic efficiency in active drag reduction, thrust generation and self-propulsion through a loss coefficient with some applications. In: Journal of Fluids and Structures, 41 . pp. 22-32.

Arakeri, VH (1979) Cavitation inception. In: Sadhana - Academy Proceedings in Engineering Sciences, 2 (MAY ). p. 149.

Arakeri, VH (1999) Contributions to some cavitation problems in turbomachinery. In: Sadhana Academy Proceedings in Engineering Sciences, 24 . pp. 453-483.

Arakeri, VH and Acosta, Allan (1981) Viscous effects in the inception of cavitation. In: Journal of Fluids Engineering, 103 (2). pp. 280-287.

Arakeri, VH and Carroll, JA and Holl, JW (1981) A Note On The Effect Of Short And Long Laminar Separation-Bubbles On Desinent Cavitation. In: Journal of Fluids Engineering, 103 (1). pp. 28-32.

Arakeri, VH and Chakraborty, S (1990) Studies towards potential use of ultrasonics in hydrodynamic cavitation control. In: Current Science (Bangalore), 59 (24). pp. 1326-1333.

Arakeri, VH and Nair , BG (1990) Sonic velocity measurements in gas-liquid mixture with low void fractions. In: Current Science (Bangalore), 59 (7). pp. 363-367.

Arakeri, VH and Ram, HSG (1984) Visualization of flow past a sphere near its critical reynolds-number. In: Current science, 53 (4). pp. 180-182.

Arakeri, VH and Ramarajan, V (1981) Inception of Cavitation From a Backward Facing Step. In: Journal of Fluids Engineering, 103 (2). pp. 288-293.

Arakeri, VH and Satyanarayana, SG and Mani, K and Sharma, SD (1991) Studies on Scaling of Flow Noise Received at the Stagnation Point of an Axisymmetric Bodynext Term. In: Journal of Sound and Vibration, 146 (3). pp. 449-462.

Arakeri, VH and Sharma, SD and Ram, Govinda HS and Mani, K (1988) The high speed water tunnel facility at the Indian Institute of Science. In: Sadhana : Academy Proceedings in Engineering Sciences, 13 (4). pp. 223-235.

Arakeri, Vijay H (1980) Boundary layer transition observations on a body of revolution with surface heating and cooling in water. In: International Journal of Heat and Mass Transfer, 23 (4). pp. 413-424.

Arakeri, Vijay H (1993) Effect of dissolved air content on single bubble sonoluminescence. In: Pramana Journal of Physics, 40 (2). pp. 145-147.

Arakeri, Vijay H (1993) Influence of various gases on single bubble sonoluminescence. In: Pramana - Journal of Physics, 41 (3). L291-L294.

Arakeri, Vijay H (1981) Real-fluid effects in flow cavitation. In: Sadhana : Academy Proceedings in Engineering Sciences, 4 (3). pp. 381-393.

Arakeri, Vijay H (1998) Resolving single bubble sonoluminescence flask width. In: Current Science, 75 (2). pp. 84-85.

Arakeri, Vijay H (2003) Sonoluminescence and bubble fusion. In: Current Science, 85 (7). pp. 911-916.

Arakeri, Vijay H and Giri, Asis (2001) Optical pulse characteristics of sonoluminescence at low acoustic drive levels. In: Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 63 (6). 066303/1-13.

Aralihalli, Sudhakara and Biswas, Sanjay K (2013) Grafting of Dispersants on MoS2 Nanoparticles in Base Oil Lubrication of Steel. In: TRIBOLOGY LETTERS, 49 (1). pp. 61-76.

Arghode, Vaibhav K and Kumar, Arvind and Sundarraj, Suresh and Dutta, Pradip (2008) Computational Modeling of GMAW Process for Joining Dissimilar Aluminum Alloys. In: Numerical Heat Transfer, Part A: Applications, 53 (4). pp. 432-455.

Arghode, Vaibhav K and Kumar, Pramod and Joshi, Yogendra and Weiss, Thomas and Meyer, Gary (2013) Rack Level Modeling of Air Flow Through Perforated Tile in a Data Center. In: JOURNAL OF ELECTRONIC PACKAGING, 135 (3).

Arora, PR and Raghavan, MR (1973) Effect Of Tensile Prestrain On Fatigue-Strength Of Aluminum-Alloy In High Cycle Fatigue. In: Journal of Engineering Materials and Technology, 95 (2). pp. 76-82.

Arora, PR and Raghavan, MR and Prasad, YVRK (1988) Effect of Prestrain on Fracture Toughness of Rolled Mild Steel with Significant Inclusion Content. In: Journal of Testing and Evaluation, 16 (3). 298 -304.

Arora, PR and Dattaguru, B and Hande, HSS (1992) A method for estimation of the radius of elastic-plastic boundary around cold-worked holes. In: Journal of Testing and Evaluation, 20 (5). pp. 369-375.

Arora, PR and Dattaguru, B and Hande, Subramanya HS (1992) The fatigue crack growth rate in L-72 Al-alloy plate specimens with cold worked holes. In: Engineering Fracture Mechanics, 42 (6). pp. 989-1000.

Arora, PR and Raghavan, MR and Prasad, YVRK (1988) Effect of prestrain on fatigue crack propagation in mild steel containing non-metallic inclusions. In: Engineering Fracture Mechanics, 29 (1). 67 -79.

Arora, PR and Simha, KRY (1996) Analytical and Experimental Evaluation of Coldworking Process for Strain Hardening Materials. In: Engineering Fracture Mechanics, 53 (3). pp. 371-385.

Ashwin, TR and Narasimham, GSVL and Jacob, Subhash (2010) CFD analysis of high frequency miniature pulse tube refrigerators for space applications with thermal non-equilibrium model. In: Applied Thermal Engineering, 30 (2-3). pp. 152-166.

Ashwin, TR and Narasimham, GSVL and Jacob, Subhash (2012) Effect of natural convection on oscillating flow in a pipe with cryogenic temperature difference across the ends. In: International Journal of Heat and Mass Transfer, 55 (4). pp. 680-694.

Ashwin, TR and Narasimham, GSVL and Jacob, Subhash (2011) Oscillatory flow and temperature fields in an open tube with temperature difference across the ends. In: International Journal of Heat and Mass Transfer, 54 (15-16). pp. 3357-3368.

Asif, SAS and Muthu, DVS and Sood, AK and Biswas, SK (1995) Surface damage of yttria-tetragonal zirconia polycrystals and magnesia-partially-stabilized zirconia in single-point abrasion. In: Journal of the American Ceramic Society, 78 (12). pp. 3357-3362.

Asif, Syed SA and Biswas, SK (1994) The mechanical response of tetragonal zirconia polycrystal to conical indentation. In: Bulletin of Materials Science, 17 (6). 863-873 .

Asif, Syed SA and Biswas, SK and Bai, Pramila BN (1990) Transfer and transitions in dry sliding wear of copper against steel. In: Scripta Metallurgica et Materialia, 24 (7). pp. 1351-1356.

Asif, Syed SA and Somasundaram, P and Umarji, AM and Biswas, SK (1993) Effect of Lanthanum Substitution at the Barium Site on the Mechanical Behaviour in YBCO Superconductor. In: Materials Research Bulletin, 28 (1). pp. 73-80.

Askalany, Ahmed A and Saha, Bidyut B and Uddin, Kutub and Miyzaki, Takahiko and Koyama, Shigeru and Srinivasan, Kandadai and Ismail, Ibrahim M (2013) Adsorption Isotherms and Heat of Adsorption of Difluoromethane on Activated Carbons. In: JOURNAL OF CHEMICAL AND ENGINEERING DATA, 58 (10). pp. 2828-2834.

Auchter, Joseph and Moore, Carl and Ghosal, Ashitava (2007) Modeling of wheeled mobile robots using dextrous manipulation kinematics. In: Proceedings of the World Congress on Engineering and Computer Science 2007,WCECS 2007, October 24-26, 2007, San Francisco.

Avulapati, Madan Mohan and Anand, TNC and Ravikrishna, RV (2013) Full Chemical Kinetic Simulation of Biogas Early Phase Combustion in SI Engines. In: Energy and Fuels, 27 (1). pp. 197-207.

Avulapati, Madan Mohan and Ravikrishna, R (2013) AN EXPERIMENTAL STUDY ON EFFERVESCENT ATOMIZATION OF BIO-OIL FUELS. In: ATOMIZATION AND SPRAYS, 22 (8). pp. 663-685.

Avulapati, Madan Mohan and Venkata, Ravikrishna Rayavarapu (2013) Experimental studies on air-assisted impinging jet atomization. In: INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 57 . pp. 88-101.

ayadevan, KR and Narasimhan, R (1995) Finite element simulation of wedge indentation. In: Computers & Structures, 57 (5). pp. 915-927.

B

Babu, AR and Basu, N and Visweswariah, S and Gundiah, N and Rathod, ML (2012) Role of substrate stiffness and mechanical stimulus in endothelial phenotype. In: International Conference on Angiogenesis: Basics and Applications, 1–3 March 2012, Chennai, Tamilnadu, India.

Babu, AR and Gundiah, N (2014) Role of Crosslinking and Entanglements in the Mechanics of Silicone Networks. In: EXPERIMENTAL MECHANICS, 54 (7). pp. 1177-1187.

Bai, BN Pramila and Dwarakadasa, ES and Biswas, SK (1982) Scanning electron microscopy studies of wear in LM13 and LM13-graphite particulate composite. In: Wear, 76 (2). pp. 211-220.

Bai, BNP and Biswasa, SK and Kumtekar, NN (1983) Scanning electron microscopy study of worn Al-Si alloy surfaces. In: Wear, 87 (3). pp. 237-249.

Bai, BNP and Saravanan, RA and Surappa, RA (1996) Tribological studies on aluminium matrix composites. In: Discussion Meeting on Inorganic Matrix Composites, MAR 08-11, 1995, Bangalore, India.

Bai, Pramila BN and Biswas, SK (1987) Characterization of dry sliding wear of Al---Si alloys. In: Wear, 120 (1). pp. 61-74.

Bai, Pramila BN and Biswas, SK (1991) Effect of magnesium addition and heat treatment on mild wear of hypoeutectic aluminium-silicon alloys. In: Acta Metallurgica et Materialia, 39 (5). pp. 833-840.

Bai, Pramila BN and Biswas, SK (1983) Scanning electron microscopy study of worn $Al-Si$ alloy surfaces. In: Wear, 87 (3). pp. 237-249.

Bai, Pramila BN and Haresh, K and Biswas, SK and Bhave, SK (1993) Evolution of and preconditions for generation of corrugations on a plane surface in rolling contact. In: Tribology International, 26 (3). pp. 175-182.

Bai, Pramila BN and Shamasunder, HS and Biswas, SK (1988) Debris analysis in dry sliding wear of Al-Si alloys. In: Materials Science and Engineering, 104 . L11-L14.

Bai1, BN Pramila and Biswas, SK (1984) Subsurface deformation in dry sliding of hypo-eutectic Al-Si alloys. In: Journal of Materials Science, 19 (11). pp. 3588-3592.

Baia, Pramila BN and Ramasesh, BS and Surappa, MK (1992) Dry sliding wear of A356-Al-SiCp composites. In: Wear, 157 (2). pp. 295-304.

Baichapur, Gautham S and Gugale, Harshala and Maheshwari, Ashveen and Bhargav, Santosh DB and Ananthasuresh, GK (2014) A Vision-Based Micro-Newton Static Force Sensor Using a Displacement-Amplifying Compliant Mechanism (DaCM). In: MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 42 (2). pp. 193-210.

Bakshi, S and Anand, TNC and Ravikrishna, RV (2007) In-cylinder charge stratification and fuel-air mixing in a new, low-emission two-stroke engine. In: International Journal of Engine Research, 8 (3). pp. 271-287.

Bakshi, S and Deshmukh, D and Ravikrishna, RV (2004) Multidimensional modelling of flow through piston-controlled ports using a multi-block, moving mesh algorithm. In: Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, 218 (2). pp. 207-222.

Bakshi, S and Ravikrishna, RV (2003) Assessment of zero-dimensional, hybrid and multidimensional simulations for transient air flow through a cylinder-duct assembly. In: Proceedings of the Institution of Mechanical Engineers - Part C: Mechanical Engineering Science, 217 (5). pp. 585-591.

Bakshi, S and Ravikrishna, RV (2003) Multidimensional simulation of the air-flow and fuel transport process in the air-assisted injection system of a new, low-emission two-stroke engine. In: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 217 (D5). pp. 383-392.

Balachandra, TC and Ravindran, K and Nagabhushana, GR (1991) Numerical estimation of hotspot temperatures in electrodes subjected to pulsed electron beam heating in vacuum. In: International Communications in Heat and Mass Transfer, 18 (3). pp. 397-405.

Balaji, G and Ananthasuresh, GK (2007) Flow-rate Measurements of an Electro-Magnetically Actuated, Miniature, Self-priming Liquid Pump. In: flotec.g Global Conference and Exhibition 2007, Towards Intelligent Flow Measurement & Control System, , 26-28, Sep., 2007, Palakkad, India.

Balaji, G and Biradar, P and Saikrishna, CN and Ramaiah, Venkata K and Bhaumik, SK and Haruray, A and Ananthasuresh, GK (2008) An SMA-actuated, Compliant Mechanism-based Pipe-crawler. In: CD-ROM proceedings of ISSS 2008, International Conference on Smart Materials, Structures, and System.

Balaji, G and Singh, A and Ananthasuresh, GK (2006) Electro-magnetically Actuated Minute Polymer Pump Fabricated using Packaging Technology. In: International MEMS Conference 2006, MAY 09-12, 2006, Singapore, SINGAPORE, pp. 258-263.

Balakrishna, R and Ghosal, Ashitava (1995) Modeling of Slip for Wheeled Mobile Robots. In: IEEE Transactions on Robotics and Automation, 11 (1). pp. 126-132.

Balakrishnan, Sreenath and Deshpande, Kaustubh and Ananthasuresh, GK (2012) Note on modelling directionality in piezoresistivity. In: National Conference on Smart Materials Structures and Systems, September 21-22, 2012, Coimbatore, India.

Balasingh, C and Seshadri, MR and Srinivasan, MN and Ramaseshan, S (1984) Effect of carbon equivalent and inoculation on residual stresses in grey iron castings. In: Journal of Mechanical Working Technology, 9 (1). pp. 53-66.

Balu, R and Marathe, AG and Paul, PJ and Mukunda, HS (1991) Analysis of performance of a hot gas injection thrust vector control system. In: Journal of Propulsion and Power, 7 (4). pp. 580-585.

Ban, Tula Ram and Sen, Dibakar (2003) Graph Based Topological Analysis of Tessellated Surfaces. In: Eighth ACM Symposium on Solid Modeling and Applications, June 16 - 20, 2003, Seattle, Washington, USA, pp. 274-279.

Bandla, Srinivasa Rao and Gurumoorthy, B (2011) Constructing a wire-frame from views on arbitrary view planes for objects with conic sections inclined to all view planes. In: Computer-Aided Design, 43 (12). pp. 1639-1653.

Bandyopadhyay, S and Ghosal, A (2009) An eigenproblem approach to classical screw theory. In: Mechanism and Machine Theory, 44 (6). pp. 1256-1269.

Bandyopadhyay, S and Ghosal, A and Ravani, B (2002) A differential geometric method for kinematic analysis of two- and three-degree-of-freedom rigid body motions. In: Mechanics of Structures and Machines, 30 (3). pp. 279-307.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2004) Analysis of configuration space singularities of closed-loop mechanisms and parallel manipulators. In: Mechanism and Machine Theory, 39 (5). pp. 519-544.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2004) Analytical determination of principal twists in serial, parallel and hybrid manipulators using dual vectors and matricies. In: Mechanism and Machine Theory, 39 (12). pp. 1289-1305.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2007) Classical screw theory: A fresh look using dual eigenvalue approach. In: 13th National Conference on Mechanisms and Machines (NaCoMM07),, December 12-13, 2007, IISc, Bangalore.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2006) Geometric characterization and parametric representation of the singularity manifold of a 6-6 Stewart platform manipulator. In: Mechanism and Machine Theory, 41 (11). pp. 1377-1400.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2007) An algebraic formulation of exact force-, moment-isotropy in spatial parallel manipulators. In: 12th IFToMM World Congress, June 18-21, 2007, Besancon.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2008) An algebraic formulation of kinematic isotropy and design of isotropic 6-6 Stewart platform manipulators. In: Mechanism and Machine Theory, 43 (5). pp. 591-616.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2009) An algebraic formulation of static isotropy and design of statically isotropic 6-6 Stewart platform manipulators. In: Mechanism and Machine Theory, 44 (7). p. 1360.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2009) An algebraic formulation of static isotropy and design of statically isotropic 6–6 Stewart platform manipulators. In: Mechanism and Machine Theory, 44 (7). pp. 1360-1370.

Banerjee, S and Menon, MS and Ananthasuresh, GK and Ghosal, A (2011) Simulation of length-preserving motions of flexible one dimensional oObjects using optimization. In: 13th World Congress in Mechanism and Machine Science, Jun 19,2011 - Jun 25,2011, Guanajuato, México.

Banker, ND and Dutta, P and Prasad, M and Srinivasan, K (2008) Performance studies on mechanical + adsorption hybrid compression refrigeration cycles with HFC 134a. In: International Journal of Refrigeration, 31 (8). pp. 1398-1406.

Banker, ND and Prasad, M and Dutta, P and Srinivasan, K (2009) Activated carbon + HFC 134a based two stage thermal compression adsorption refrigeration using low grade thermal energy sources. In: Applied Thermal Engineering, 29 (11-12). pp. 2257-2264.

Banker, ND and Prasad, M and Dutta, P and Srinivasan, K (2010) Development and transient performance results of a single stage activated carbon - HFC 134a closed cycle adsorption cooling system. In: Applied Thermal Engineering, 30 (10). pp. 1126-1132.

Banker, ND and Prasad, M and Dutta, P and Srinivasan, K (2011) Experimental results of an activated carbon-HFC 134a adsorption cooling system for thermal management of electronics. In: Applied Thermal Engineering, 31 (10). pp. 1607-1612.

Banker, ND and Srinivasan, K and Prasad, M (2004) Performance analysis of activated carbon + HFC-134a adsorption coolers. In: Carbon, 42 (1). pp. 117-127.

Bapat, VA and Kumaraswamy, HV (1980) Optimizing The Untuned Viscous Dynamic Vibration Absorber With Primary System Damping - A Frequency Locus Method - Reply. In: Journal of Sound and Vibration, 73 (3). p. 472.

Bapat, VA and Kumaraswamy, HV (1979) Effect of primary system damping on the optimum design of an untuned viscous dynamic vibration absorber. In: Journal of Sound and Vibration, 63 (4). pp. 469-474.

Bapat, VA and Prabhu, P (1979) Optimum design of Lanchester damper for a viscously damped single degree of freedom system by using minimum force transmissibility criterion. In: Journal of Sound and Vibration, 67 (1). pp. 113-119.

Bapat, VA and Prabhu, P (1980) Optimum design of a Lanchester damper for a viscously damped single degree of freedom system subjected to inertial excitation. In: Journal of Sound and Vibration, 73 (1). pp. 113-124.

Bapat, VA and Srinivasan, P (1969) Approximate methods for step function response of undamped non-linear spring mass systems with arbitrary hardening type spring characteristic. In: Journal of Sound and Vibration, 10 (3). pp. 430-443.

Bapat, VA and Srinivasan, P (1969) Effect of static deflection on natural frequency of non-linear spring mass system by direct linearization method. In: Journal of Sound and Vibration, 10 (3). pp. 444-446.

Bapat, VA and Srinivasan, P (1970) Free vibrations of non-linear cubic spring mass systems in the presence of coulomb damping. In: Journal of Sound and Vibration, 11 (1). pp. 121-137.

Bapat, VA and Srinivasan, P (1969) Response of Undamped Non-linear Spring Mass Systems Subjected to Constant Force Excitation. In: Journal of Sound and Vibration, 9 (3). pp. 438-446.

Bapat, VA and Srinivasan, P (1970) Step function response of non-linear spring mass systems in the presence of Coulomb damping. In: Journal of Sound and Vibration, 13 (1). pp. 51-65.

Bapat, VA and Srinivasan, p (1970) Approximate evaluation of a class of definite integrals by the methods of non-linear mechanics. In: Journal of Sound and Vibration, 12 (3). pp. 379-383.

Bardia, P and Narasimhan, R (2006) Characterisation of Pressure-sensitive Yielding in Polymers. In: Strain, 42 (3). pp. 187-196.

Barman, N and Dutta, P (2008) Rheological Behavior of Semi-solid Slurry of A356 Alloy at High Shear and Cooling Rates. In: 10th International Conference on Semi-Solid Processing of Alloys and Composites, September 16th -18th, 2008., Aachen, Germany, pp. 409-414.

Barman, N and Dutta, Pradip (2008) Studies on macrosegregation and double diffusive convection during directional solidification of binary mixture. In: Materials Science And Technology, 24 (10). pp. 1230-1237.

Barman, N and Mukherjee, J and Dutta, P (2008) Numerical Simulation of Induction Heating of Aluminum Alloy Billets. In: 10th International Conference on Semi-Solid Processing of Alloys and Composites, September 16th -18th, 2008., Aachen, Germany, pp. 133-138.

Barman, N and Dutta, J and Jain, P (2006) Measurement of Concentration during Solidification of a Binary Mixture. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.

Barman, N and Dutta, P (2012) Evolution of Microstructure During Solidification of an Aluminium Alloy Under Stirring. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 65 (6, SI). pp. 683-687. (In Press)

Barman, N and Dutta, P (2014) Rheology of A356 Alloy During Solidification Under Stirring. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 67 (1). pp. 101-104.

Barman, N and Dutta, Pradip (2009) Effect of process parameters on transport phenomena during solidification in the presence of electromagnetic stirring. In: Transactions of the Indian Institute of Metals, 62 (4-5). pp. 469-474.

Barman, N and Kumar, P and Dutta, P (2008) Studies on Transport Phenomena in Rheocasting of Al-Si alloy in Presence of Electromagnetic Stirring. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Barman, N and Kumar, P and Dutta, Pradip (2009) Studies on transport phenomena during solidification of an aluminum alloy in the presence of linear electromagnetic stirring. In: Journal of Materials Processing Technology, 209 (18-19). pp. 5912-5923.

Basak, Anup and Nandakumar, K and Chatterjee, Anindya (2011) Decoupled three-dimensional finite element computation of thermoelastic damping using Zener's approximation. In: Meccanica, 46 (2). pp. 371-381.

Basha, Saleem M and Bansal, Lalit and Sarma, Durgesh and Basu, Saptarshi and Kumar, Pramod and Ambirajan, Amrit (2013) Solar thermal power system augmented with LHP. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 295-304.

Baskar, Sam S and Ashwin, Lal and Madhavi, S and Rudra, Pratap (2009) Design of Piezoelectric MEMS Cantilever for High Speed AFM. In: International Conference on MEMS (ICMEMS 2009), January 3-5, 2009, IIT Madras.

Bassayya, K and Bhattacharya, K and Shrinivasa, U (2000) Eight-node brick, PN340, represents constant stress fields exactly. In: Computers and Structures, 74 (4). pp. 441-460.

Bassayya, K and Shrinivasa, U (2000) A 14-node brick element, PN5X1, exactly representing linear stress fields. In: Computers and Structures, 74 (2). pp. 147-165.

Bassayya, K and Shrinivasa, U (2000) A 14-node brick element, PN5X1, for plates and shells. In: Computers and Structures, 74 (2). pp. 167-178.

Basu, R (1980) Computer study of the composition of some amorphous-alloys - metallic glasses. In: Indian Journal of Pure & Applied Physics, 18 (2). pp. 67-70.

Basu, R (1980) Computer-simulation of ternray miscibility gap in the ternray alloy PD77.5 CU6 SI16.5. In: Indian Journal of Pure & Applied Physics, 18 (3). pp. 147-149.

Basu, R (1981) Dislocation Mobilities In Zinc. In: Indian Journal of Pure & Applied Physics, 19 (5). pp. 485-486.

Basu, S and Narasimhan, R (2000) A comparative study of dynamic,ductile fracture initiation in two specimen configurations. In: International Journal of Fracture, 102 (4). pp. 393-410.

Basu, Saptarshi and Saha, Abhishek and Kumar, Ranganathan (2013) Criteria for thermally induced atomization and catastrophic breakup of acoustically levitated droplet. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 59 . pp. 316-327.

Basu, Saptarshi and Saha, Abhishek and Kumar, Ranganathan (2012) Thermally induced secondary atomization of droplet in an acoustic field. In: Applied Physics Letters, 100 (5).

Basu, Sumit and Narasimhan, R (1996) Finite Element Simulation of Mode I Dynamic, Ductile Fracture Initiation. In: International Journal of Solids and Structures, 33 (8). pp. 1191-1207.

Basu, Sumit and Narasimhan, R (1999) A Finite Element Study Of The Effects Of Material Characteristics And Crack Tip Constraint On Dynamic Ductile Fracture Initiation A Finite Element Study Of The Effects Of Material Characteristics And Crack Tip Constraint On Dynamic Ductile Fracture Initiation. In: Journal of The Mechanics And Physics of Solids, 47 (2). pp. 325-350.

Basu-Mandal, Pradipta and Chatterjee, Anindya and Papadopoulos, JM (2007) Hands-free circular motions of a benchmark bicycle. In: Proceedings of the Royal Society A- Mathematical Physical & Engineering Sciences, 463 (2084). pp. 1983-2003.

Basumatary, R and Dutta, P and Prasad, M and Srinivasan, K (2005) Thermal modeling of activated carbon based adsorptive natural gas storage system. In: Carbon, 43 (3). pp. 541-549.

Behera, Ramesh Chandra and Dutta, Pradip and Srinivasan, K (2007) Numerical Study of Interrupted Impinging Jets for Cooling of Electronics. In: IEEE Transactions on Components and Packaging Technologies, 30 (2). pp. 275-284.

Bhandakkar, TK and Jog, CS (2005) An alternative numerical implementation of the Burnett family of acoustic infinite elements. In: Journal of the Acoustical Society of America, 118 (4). pp. 2295-2301.

Bharathidasan, T and Kumar, Vijay S and Bobji, MS and Chakradhar, RPS and Basu, Bharathibai J (2014) Effect of wettability and surface roughness on ice-adhesion strength of hydrophilic, hydrophobic and superhydrophobic surfaces. In: APPLIED SURFACE SCIENCE, 314 . pp. 241-250.

Bhargav, Santosh DB and Chakravarthy, Shanthanu and Ananthasuresh, GK (2012) A Compliant End-Effector to Passively Limit the Force in Tele-Operated Tissue-Cutting. In: JOURNAL OF MEDICAL DEVICES-TRANSACTIONS OF THE ASME, 6 (4).

Bhaskar, Dasgupta and TS, Mruthyunjaya (1998) A Newton-Euler formulation for the inverse dynamics of the Stewart platform manipulator. In: Mechanism and Machine Theory, 33 (8). 1135 -1152.

Bhaskar, Dasgupta and Mruthyunjaya, TS (1996) A constructive predictor-corrector algorithm for the direct position kinematics problem for a general 6-6 Stewart platform. In: Mechanism and Machine Theory, 31 (6). pp. 799-811.

Bhat, Navakanta Thejas and Pratap, Rudra (2009) High Accuracy Angular Rate Sensing using GyroFET. In: International Conference on MEMS (ICMEMS 2009), January 3-5, 2009, IIT Madras.

Bhat, Nikhil and Kumar, Senthil and Tan, Wayne and Narasimhan, Ramarthinam and Low, Tsu Chuin (2012) Performance of inherently compensated flat pad aerostatic bearings subject to dynamic perturbation forces. In: PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 36 (3). pp. 399-407.

Bhat, Shantanu S and Govardhan, Raghuraman N (2013) Stall flutter of NACA 0012 airfoil at low Reynolds numbers. In: Journal of Fluids and Structures, 41 . pp. 166-174.

Bhatt, MS and Srinivasan, K and Murthy, Krishna MV and Seetharamu, S (1992) Thermodynamic modelling of absorption-resorption heating cycles with some new working pairs. In: Heat Recovery Systems and CHP, 12 (3). pp. 225-233.

Bhatt, MS and Srinivasan, K and Murthy, MVK and Seetharamu, S (1994) Absorption-resorption heating cycles with the new working pairs R21-NMP and R21-DMA. In: Energy conversion and management, 35 (5). 443 -451.

Bhattacharya, Anirban and Dutta, Pradip (2014) Effect of shrinkage induced flow on binary alloy dendrite growth: An equivalent undercooling model. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 57 . pp. 216-220.

Bhattacharya, Anirban and Dutta, Pradip (2013) Role of convection in microstructure evolution during solidification. In: Current Science, 105 (4). pp. 480-485.

Bhattacharya, Anirban and Dutta, Pradip (2013) An enthalpy-based model of dendritic growth in a convecting binary alloy melt. In: INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 23 (7). pp. 1121-1135.

Bhattacharya, Anirban and Karagadde, Shyamprasad and Dutta, Pradip (2013) An equivalent undercooling model to account for flow effect on binary alloy dendrite growth rate. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 47 . pp. 15-19.

Bhattacharya, Anirban and Kiran, Apoorva and Karagadde, Shyamprasad and Dutta, Pradip (2014) An enthalpy method for modeling eutectic solidification. In: JOURNAL OF COMPUTATIONAL PHYSICS, 262 . pp. 217-230.

Bhavikatti, Shivanand and Ranganath, R and Ghosal, A (2007) A near-singular, flexure jointed, moment sensitive Stewart platform based fore-torque sensor. In: 13th National Conference on Mechanisms and Machines (NaCoMM07, December 12-13, 2007, IISc, Bangalore.

Bhimarasetty, Aravind and Govardhan, Raghuraman N (2010) A simple method for potential flow simulation of cascades. In: Sadhana : Academy Proceedings in Engineering Sciences, 35 (6). pp. 649-657.

Bhoite, Mayur T and Narasimham, GSVL (2008) Turbulent mixed convection in a shallow enclosure with a series of heat generating components. In: International Journal of Thermal Sciences, 48 (5). pp. 948-963.

Bhowmick, H and Majumdar, SK and Biswas, SK (2012) Dry tribology and nanomechanics of gaseous flame soot in comparison with carbon black and diesel soot. In: Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, 226 (C2). pp. 394-402.

Bhowmick, Hiralal and Biswas, SK (2011) Relationship Between Physical Structure and Tribology of Single Soot Particles Generated by Burning Ethylene. In: Tribology Letters, 44 (2). pp. 139-149.

Bhowmick, Hiralal and Biswas, SK (2011) Tribology of ethylene-air diffusion flame soot under dry and lubricated contact conditions. In: Journal of Physics D: Applied Physics, 44 (48).

Bhowmick, Hiralal and Majumdar, SK and Biswas, SK (2013) Influence of physical structure and chemistry of diesel soot suspended in hexadecane on lubrication of steel-on-steel contact. In: Wear, 300 (1-2). pp. 180-188.

Bhowmick, Hiralal and Majumdar, SK and Biswas, SK (2012) Tribology of soot suspension in hexadecane as distinguished by the physical structure and chemistry of soot particles. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 45 (17).

Bhowmick, S and Bhide, R and Hoffman, M and Jayaram, V and Biswas, SK (2005) Fracture mode transitions during indentation of columnar TiN coatings on metal. In: Philosophical Magazine, 85 (25). pp. 2927-2945.

Bhowmick, S and Jayaram, V and Biswas, SK (2005) Deconvolution of fracture properties of TiN films on steels from nanoindentation load-displacement curves. In: Acta Materialia, 53 (8). pp. 2459-2467.

Bhowmick, S and Kale, AN and Jayaram, V and Biswas, SK (2003) Contact damage in TiN coatings on steel. In: Thin Solid Films, 436 (2). pp. 250-258.

Biswas, SK and Devaprakasam, D (2006) Stress induced phase transition in monomolecular perfluroalkylsilane film self assembled on aluminium surface. In: Symposium on Surface Engineering for Manufacturing Applications held at the 2005 MRS Fall Meeting, Nov 28-Dec 01, 2005, Boston, MA,, pp. 241-246.

Biswas, P and Narasimhan, R (2012) Quasi-static crack tip fields in rate-sensitive FCC single crystals. In: SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 37 (1, SI). pp. 149-169.

Biswas, P and Narasimhan, R (2002) A numerical study of constraint effects on dynamic ductile crack initiation. In: Mechanics of Materials, 34 (9). pp. 577-592.

Biswas, P and Narasimhan, R and Kumar, AM (2013) Interaction between a notch and cylindrical voids in aluminum single crystals: Experimental observations and numerical simulations. In: JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 61 (4). pp. 1027-1046.

Biswas, P and Narasimhan, R and Tewari, A (2011) Influence of crack tip constraint on void growth in ductile FCC single crystals. In: Materials Science and Engineering A, 528 (3). pp. 823-831.

Biswas, S and Bose, SC and Bhave, SK and Bai, Pramila BN and Biswas, SK (1992) Study of corrugations in motor bearings. In: Tribology International, 25 (1). pp. 27-36.

Biswas, SK (1993) Debiprasad Chattopadhyaya - The modern Indian sage. In: Current Science (Bangalore), 65 (11). pp. 889-891.

Biswas, SK (1985) Monoblock cylinder internally pressurised under asymmetric end constraints Some aspects of design. In: International Journal of Mechanical Sciences, 27 (5). pp. 325-334.

Biswas, SK (1997) Siding wear of materials. In: 1st World Tribology Congress - New Directions in Tribology, Sep 08, 1996-Sep 12, 1997, London, England.

Biswas, SK (2000) Some mechanisms of tribofilm formation in metal/metal and ceramic/metal sliding interactions. In: Wear, 245 (1-2). pp. 178-189.

Biswas, SK (2002) Wear of metals: a consequence of stable/unstable material response. In: Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 216 (J6). 357-369 .

Biswas, SK and Pramila Bai, BN (1981) Dry wear of al-graphite particle composites. In: WearWear, 68 (3). pp. 347-358.

Biswas, SK and Ramesh, M (1991) Study of forging design using slip-line fields. In: Journal of Materials Processing Technology, 25 (1). pp. 1-13.

Biswas, SK and Rao, KVJ (1985) Flow of metal into the flash gap in the last stages of a plane-strain closed-die forging operation. In: Journal of Mechanical Working Technology, 11 (3). pp. 319-331.

Biswas, SK and Singh, Arvind R (2002) Wear of metals-influence of some primary material properties. In: Tribology Letters, 13 (3). pp. 203-207.

Biswas, SK and Vijayan, Kalyani (1988) Changes to near-surface region of PTFE during dry sliding against steel. In: Journal of Materials Science, 23 (5). pp. 1877-1885.

Biswas, Sanjay Kumar and Devaprakasam, D (2005) Stress induced phase transition in a monomolecular perfluroalkylsilane film self assembled on aluminium surface. In: MRS Proceedings, 890 . Y08-33.

Biswas, Somjeet and ingh, Satyaveer D and Suwas, Satyam (2009) Grain Growth in ECAE Processed Pure Magnesium. In: International Conference on Microstructure and texture in Steels and Other Materials, FEB 05-07, 2008, Jamshedpur, pp. 465-473.

Biswasa, SK and Rao, KVJ (1983) Flow of metal in a wedge-shaped cavity. In: Journal of Mechanical Working Technology, 8 (1). pp. 27-41.

Biswasa, SK and Shantharam, A and Rao, NAP and Swamy, K Narayana and Rohatgi, PK and Biswas, SK (1980) Performance of graphic aluminium particulate composite materials. In: Tribology International, 13 (4). pp. 171-176.

Biswasa, SK and Vidyasagar, A (1985) Flow of metal in constrained plane-strain extrusion forging- Part II. In: Journal of Mechanical Working Technology, 11 (2). pp. 139-149.

Bobji, MS and Biswas, SK (1996) Determination and study of the strength of the blister field generated by conical indentation. In: Philosophical Magazine A, 73 (2). pp. 399-413.

Bobji, MS (2007) Non contact Deformation Measurement of Large Space Structures Using Digital Image Correlation. In: Conference on Advances in Space Science and Technology, , 2007, Bangalore.

Bobji, MS (2005) Springing the trap. In: Journal of Biosciences, 30 (2). pp. 143-146.

Bobji, MS and Biswas, SK (1999) Deconvolution of hardness from data obtained from nanoindentation of rough surfaces. In: Journal Of Materials Research, 14 (6). pp. 2259-2268.

Bobji, MS and Biswas, SK (1998) Estimation of hardness by nanoindentation of rough surfaces. In: Journal of Materials Research, 13 (11). pp. 3227-3233.

Bobji, MS and Biswas, SK (1999) Hardness of a surface containing uniformly spaced pyramidal asperities. In: Tribology Letters, 7 (1). pp. 51-56.

Bobji, MS and Biswas, SK (1997) Numerical simulation of nano-indentation on rough surfaces. In: 10th International Conference on Surface Modification Technologies, 2-4 Sept. 1997, Singapore; Singapore.

Bobji, MS and Biswas, SK and Pethica, JB (1997) Effect of roughness on the measurement of nanohardness—a computer simulation study. In: Applied Physics Letters, 71 (8). pp. 1059-1061.

Bobji, MS and Govardhan, RN (2009) Designing superhydrophobic surfaces for underwater applications. In: Conference on Recent Advances in Surface Engineering (RASE09), 26-27 February, 2009, NAL, Bangalore.

Bobji, MS and Pendyala, Prashant and Gupta, Preeti and Kalode, Pranav (2011) Effect of porosity on the indentation behaviour of nanoporous alumina films. In: International Journal of Surface Science and Engineering, 5 (1, Sp.). pp. 51-62.

Bobji, MS and Pethica, JB and Inkson, BJ (2005) Indentation mechanics of Cu-Be quantified by an in situ transmission electron microscopy mechanical probe. In: Journal of Materials Research, 20 (10). pp. 2726-2732.

Bobji, MS and Selvan, Arul K (2009) Mechanical Machining for Nano manufacturing. In: Sixth International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 6) , 11-12 December, 2009, Coimbatore.

Bobji, MS and Shivakumar, K and Alehossein, H and Venkateshwarlu, V and Biswas, SK (1999) Influence of surface roughness on the scatter in hardness measurements - a numerical study. In: International Journal of Rock Mechanics and Mining Sciences, 36 (3). pp. 399-404.

Bobji, MS and Venkatesh, K and Biswas, SK (1999) Roughness generated in surface grinding of metals. In: Journal of Tribology, 121 (4). pp. 746-752.

Bobji, MS and Xavier, Shijo and Badole, Rupesh and Solomon, Christopher and Raddaiah, T and Chandra, Piyush and Haldar, Sandip (2006) A Comparative Study of Roughness Parameters for Different Surfaces. In: International Conference on Industrial Tribology.

Bobji, MS and Xavier, Shijo and Jayadeep, UB and Jog, CS (2010) Adhesion-Induced Instability in Asperities. In: Tribology Letters, 39 (2). pp. 201-209.

Bobji, Musuvathi S and Balan, Ganesh and Govardhan, Raghuraman N (2011) Time dependent superhydrophobicity of drag reducing surfaces. In: 3rd Micro and Nano Flows Conference (MNF2011), 22-24 August 2011, Thessaloniki, Greece.

Bobji, Musuvathi S and Kumar, S Vijay and Asthana, Ashish and Govardhan, Raghuraman N (2009) Underwater Sustainability of the ``Cassie'' State of Wetting. In: Langmuir, 25 (20). pp. 12120-12126.

Boggavarapu, Prasad and Ray, Baidurja (2014) Thermal Efficiency of LPG and PNG-fired burners: Experimental and numerical studies. In: FUEL, 116 . pp. 709-715.

Boniface, V and Simha, KRY (1997) Invariant points on energy contours around a crack tip under mixed mode loading. In: International Journal of Fracture, 86 (4). pp. 301-325.

Boniface, V and Simha, KRY (1995) Plastic energy dissipation in mixed-mode fracture. In: International Journal of Fracture, 73 (1). R3-R8.

Boniface, V and Simha, KRY (1999) Re-examination of crack opening model of interface fracture. In: Engineering Fracture Mechanics, 64 (6). pp. 677-691.

Boniface, V and Simha, KRY (2001) Suppression of complex singularity using wedge interphase in interface fracture. In: International Journal of Solids and Structures, 38 (30-31). pp. 5411-5420.

Boniface, V and Simha, KRY (1991) A plastic zone model of mixed mode fracture. In: International Journal of Fracture, 48 (1). R9-R12.

Briscoe, BJ and Biswas, SK and Sinha, SK and Panesar, SS (1993) The scratch hardness and friction of a soft rigid-plastic solid. In: Tribology International, 26 (3). pp. 183-193.

Buni, SY and Raman, N and Seshan, S (1997) Effect of spatial distribution of graphite and matrix on dry sliding wear of cast irons. In: Materials Science and Technology, 13 (9). pp. 749-753.

Buni, Yusuf S and Raman, N and Seshan, S (1993) Wear characteristics of different types of cast iron. In: Metals Materials and Processes, 5 (2). pp. 111-117.

Buni, SY and Raman, N and Seshan, S (1995) Characterization of cast irons for optimum performance by overall rating method. In: Metals Materials and Processes, 7 (2). pp. 93-97.

Buni, SY and Raman, N and Seshan, S (1996) Effect of structural features on erosion resistance of cast irons. In: Tribology Letters, 2 (1). 99 - 111.

Bysakh, S and Mitra, SK and Phanikumar, G and Mazumder, J and Dutta, P and Chattopadhyay, K (2003) Characterization of microstructure in laser-surface-alloyed layers of aluminum on nickel. In: Metallurgical and Materials Transactions A, 34A (11). pp. 2621-2631.

C

Chaitanaya, Choudary P and Munjal, ML (2011) Tuning of the extended concentric tube resonators. In: International Journal of Acoustics and Vibration, 16 (3). pp. 111-118.

Chaitanya, P and Munjal, ML (2009) Direct measurement of the four-pole parameters of an acoustic element. In: UNSPECIFIED, November 2009, Hyderabad.

Chaitanya, P and Munjal, ML (2011) Effect of wall thickness on the end corrections of the extended inlet and outlet of a double-tuned expansion chamber. In: Applied Acoustics, 72 (1). pp. 65-70.

Chaitanya, P and Munjal, ML (2011) Experimental validation of the 1-D acoustical model for conical concentric tube resonators with moving medium. In: Noise Control Engineering Journal (NCEJ), 59 (2). pp. 158-164.

Chakraborty, Ishita and Mohanty, Atanu K and Chatterjee, Anindya (2008) Localized waves along a line of masses on a plate: propagation and sub-exponential attenuation. In: Proceedings of the Royal Society A- Mathematical, Physical and Engineering Sciences, 464 (2097). pp. 2229-2246.

Chakraborty, S and Dutta, P (1999) A scaling analysis for transport phenomena during alloy solidification in a rectangular cavity. In: Journal Of Materials Processing & Manufacturing Science, 7 (3). pp. 236-250.

Chakraborty, Suman and Dutta, Pradip (2005) Effects of Solutal Undercooling on Three-Dimensional Double-Diffusive Convection and Macrosegregation during Solidification of a Binary Alloy. In: Numerical Heat Transfer Part A: Applications, 48 (3). pp. 261-281.

Chakraborty, Suman and Dutta, Pradip (2002) The effect of solutal undercooling on double-diffusive convection and macrosegregation during binary alloy solidification: a numerical investigation. In: International Journal for Numerical Methods in Fluids, 38 (9). pp. 895-917.

Chakraborty, N and Chakraborty, S (2002) A generalized object-oriented computational method for simulation of power and process cycles. In: Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 216 (2). pp. 155-159.

Chakraborty, Nilanjan and Chakraborty, Suman and Dutta, Pradip (2003) Modelling of turbulent transport in arc welding pools. In: International Journal of Numerical Methods for Heat and Fluid Flow, 13 (1). 07-30.

Chakraborty, Nilanjan and Ghosal, Ashitava (2005) Dynamic Modeling and Simulation of a Wheeled Mobile Robot for Traversing Uneven Terrain Without Slip. In: Journal of Mechanical Design, 127 (5). pp. 901-909.

Chakraborty, Nilanjan and Ghosal, Ashitava (2004) Kinematics of wheeled mobile robots on uneven terrain. In: Mechanism and Machine Theory, 39 (12). pp. 1273-1287.

Chakraborty, P and Kumar, A and Dutta, P (2008) Experimental and Numerical studies on Settling of Solid Crystals during Freezing of Aqueous Ammonium Chloride Solution. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Chakraborty, Prodyut R and Dutta, Pradip (2011) A Generalized Enthalpy Update Scheme for Solidification of a Binary Alloy with Solid Phase Movement. In: Metallurgical and Materials Transactions B, 42 (6). pp. 1075-1079.

Chakraborty, S and Chakraborty, N and Kumar, P and Dutta, P (2003) Studies on turbulent momentum, heat and species transport during binary alloy solidification in a top-cooled rectangular cavity. In: International Journal of Heat and Mass Transfer, 46 (7). pp. 1115-1137.

Chakraborty, S and Dutta, P (2002) Scaling analysis of momentum, heat, and mass transfer in binary alloy solidification problems. In: Materials Science and Technology, 18 (6). 600-606 .

Chakraborty, S and Dutta, P (2003) Three-dimensional double-diffusive convection and macrosegregation during non-equilibrium solidification of binary mixtures. In: International Journal of Heat and Mass Transfer, 46 (12). pp. 2115-2134.

Chakraborty, S and Dutta, P (2000) A generalized algorithm for modelling phase change problems in materials processing. In: Current Science, 78 (7). pp. 887-891.

Chakraborty, S and Sarkar, S and Dutta, P (2001) Effect of constitutional supercooling on the numerical solution of species concentration distribution in laser surface alloying. In: Metallurgical and Materials Transactions B, 32 (5). pp. 969-972.

Chakraborty, S and Sarkar, S and Dutta, P (2002) Scaling analysis of momentum and heat transport in gas tungsten arc weld pools. In: Science and Technology of Welding & Joining, 7 (2). 88-94 .

Chakraborty, Suman and Dutta, Pradip (2003) Analytical solutions for heat transfer during cyclic melting and freezing of a phase change material used in electronic or electrical packaging. In: Journal of Electronic Packaging, 125 (1). pp. 126-133.

Chakraborty, Suman and Dutta, Pradip (2004) Effects of solid layer thickness and nominal composition on double-diffusive instabilities during solidification of a binary alloy cooled from the top. In: International Journal of Heat and Mass Transfer, 47 (1). pp. 185-190.

Chakraborty, Suman and Dutta, Pradip (2002) Numerical modeling of heat and mass transfer in laser surface alloying: Non-equilibrium solidification effects. In: Materials and Manufacturing Processes, 17 (4). 455-468 .

Chakraborty, Suman and Dutta, Pradip (2002) An analytical solution for conduction-dominated unidirectional solidification of binary mixtures. In: Applied Mathematical Modelling, 26 (4). pp. 545-561.

Chakroborty, Suman and Dutta, Pradip (2001) A generalized formulation for evaluation of latent heat functions in enthalpy-based macroscopic models for convection-diffusion phase change processes. In: Metallurgical and Materials Transactions B, 32 (3). pp. 562-564.

Chandra, R and Krishnamurthy, MV and Jacob, S and Kasthurirengan, S and Karunanithi, R (1996) Effect of vacuum on the mass flow characteristics of a horizontal liquid nitrogen transfer line. In: Vacuum, 47 (11). pp. 1379-1384.

Chandra, Shaker and Ghosal, Ashitava (2006) Nonlinear Modeling of Flexible Manipulators Using Nondimensional Variables. In: Journal of Computational and Nonlinear Dynamics, 1 (2). pp. 123-134.

Chandraker, AL and Munjal, ML (1979) Aeroacoustics of a free subsonic jet - directional characteristics. In: Acustica, 43 (4). pp. 233-240.

Chandraker, AL and Munjal, ML (1978) Aerodynamic noise from wave-turbulence interaction. In: Proceedings Mathematical Sciences, 87 (9). pp. 253-263.

Chandraker, AL and Munjal, ML (1978) Directivity and Mach number Dependence of Sound Radiated from Turbulent Jets. In: Indian Journal of Technology, 16 (1). pp. 18-24.

Chandraker, AL and Munjal, ML (1975) Generalized aerodynamic noise equation. In: Physics of Fluids, 18 (2). pp. 264-265.

Chandraker, AL and Munjal, ML (1979) Noise from an axisymmetric shear flow: I numerical results. In: Mechanics Research Communications, 6 (2). pp. 61-68.

Chandraker, AL and Munjal, ML (1979) Noise from an axisymmetric shear flow: II analytical results. In: Mechanics Research Communications, 6 (2). pp. 69-73.

Chandrapa, KG and Muralidhara, MK and Muralidhara, BK and Seshan, S (1989) Physical and thermal properties of sodium silicate-bonded self-setting sands. In: Fonderie-Fondeur d'Aujourd'hui, 83 . pp. 25-34.

Chanekar, Prasad Vilas and Ghosal, Ashitava (2013) Optimal synthesis of adjustable planar four-bar crank-rocker type mechanisms for approximate multi-path generation. In: MECHANISM AND MACHINE THEORY, 69 . pp. 263-277.

Charanjeet Kaur, Malhi and Pratap, Rudra and Bhat, Navakanta (2009) MOSFET based MEMS Microphone with Wide Frequency Band. In: International Conference on MEMS (ICMEMS 2009), January 3-5, 2009, IIT Madras.

Chatterjee, Anindya and Garcia, Mariano (2000) Small slope implies low speed for McGeer's passive walking machines. In: Dynamics and Stability of Systems, 15 (2). pp. 139-157.

Chatterjee, A (2003) Harmonic Balance Based Averaging: Approximate Realizations of an Asymptotic Technique. In: Nonlinear Dynamics, 32 (4). pp. 323-343.

Chatterjee, A and Cusumano, JP and Chelidze, D (2002) Optimal tracking of parameter drift in a chaotic system: experiment and theory. In: Journal of Sound and Vibration, 250 (5). pp. 877-901.

Chatterjee, Anindya (2010) How to write a passable technical paper. [Teaching Resource] (Unpublished)

Chatterjee, Anindya (2005) Mathematics in Engineering. In: Current Science, 88 (3). pp. 405-414.

Chatterjee, Anindya (2005) Statistical origins of fractional derivatives in viscoelasticity. In: Journal of Sound and Vibration, 284 (3-5). pp. 1239-1245.

Chatterjee, Anindya and Cusumano, Joseph P (2002) Asymptotic Parameter Estimation via Implicit Averaging on a Nonlinear Extended System. In: Journal of Dynamic Systems, Measurement, and Control, 125 (1). pp. 11-18.

Chatterjee, D and Arakeri, VH (1997) Towards the concept of hydrodynamic cavitation control. In: Journal of Fluid Mechanics, 332 . pp. 377-394.

Chatterjee, Dhiman (2003) Use of ultrasonics in shear layer cavitation control. In: Ultrasonics, 41 (6). pp. 465-475.

Chatterjee, Dhiman and Arakeri, Vijay H (2004) Some investigations on the use of ultrasonics in travelling bubble cavitation control. In: Journal of Fluid Mechanics, 504 . pp. 365-389.

Chaudhry, V and Kailas, Satish V (2014) Elastic-plastic contact conditions for frictionally constrained bodies under cyclic tangential loading. In: Journal of Tribology - Transactions of the ASME, 136 (1). 011401_1-011401_17.

Chaudhry, V and Kailas, Satish V (2013) Fretting studies on self-mated stainless steel and chromium carbide coated surfaces under controlled environment conditions. In: WEAR, 301 (1-2, S). pp. 524-539.

Chaudhry, V and Simha, KRY and Kailas, Satish V (2014) Energy based approach for the evaluation of damage under partial slip and gross sliding condition. In: WEAR, 315 (1-2). pp. 115-124.

Chelliah, Nagaraj and Kailas, Satish V (2009) Synergy between tribo-oxidation and strain rate response on governing the dry sliding wear behavior of titanium. In: Wear, 266 (7-8). pp. 704-712.

Chitsaz, Sam and Gundiah, Namrata and Blackshear, Charlie and Tegegn, Nebiyu and Yan, Kimberly S. and Azadani, Ali N. and Hope, Michael and Tseng, Elaine E (2012) Correlation of Calcification on Excised Aortic Valves by Micro-Computed Tomography with Severity of Aortic Stenosis. In: JOURNAL OF HEART VALVE DISEASE, 21 (3). pp. 320-327.

Cholemari, Murali R and Arakeri, Aywant H (2009) Axially homogeneous, zero mean flow buoyancy-driven turbulence in a vertical pipe. In: Journal of Fluid Mechanics, 621 . pp. 69-102.

Cholemari, Murali R and Arakeri, Jaywant H (2009) Axially homogeneous, zero mean flow buoyancy-driven turbulence in a vertical pipe. In: Journal Of Fluid Mechanics, 621 . pp. 69-102.

Cholemari, Murali R and Arakeri, Jaywant H (2005) Experiments and a model of turbulent exchange flow in a vertical pipe. In: International Journal of Heat and Mass Transfer, 48 (21-22). pp. 4467-4473.

Cholemari, Murali R and Arakeri, Jaywant H (2006) Measurements of buoyancy driven turbulence in vertical pipe. In: EUROMECH Fluid Mechanics Conference 6 Royal Institute of Technology, June 26-30 2006, Stockholm.

Cholemari, Murali R and Arakeri, Jaywant H (2005) Waves on radial film flows. In: Physics of fluids, 17 (8). 084108-1.

Cholemari, Murali R and Arakeri, Jaywant H (2006) A model relating Eulerian spatial and temporal velocity correlations. In: Journal of Fluid Mechanics, 551 . pp. 19-29.

Choudhury, P and Ghosal, A (2000) Singularity and controllability analysis of parallel manipulators and closed-loop mechanisms. In: Mechanism and Machine Theory, 35 (10). pp. 1455-1479.

Chowdhury, Roy S and Narasimhan, R (1998) Ductile failure in a constrained metal layer under mixed mode loading. In: Acta Materialia, 46 (4). pp. 1103-1113.

Chowdhury, Roy S and Narasimhan, R (1995) Finite element simulations of ductile rupture in a constrained metal foil. In: Materials Science and Engineering A, 191 (1-2). pp. 27-37.

Chowdhury, Roy S and Narasimhan, R (2000) A cohesive finite element formulation for modelling fracture and delamination in solids. In: Sadhana Academy Proceedings in Engineering Sciences, 25 (6). pp. 561-587.

Chowdhury, Roy S and Narasimhan, R (2000) A finite element analysis of stationary crack tip fields in a pressure sensitive constrained ductile layer. In: International Journal of Solids and Structures, 37 (22). pp. 3079-3100.

Christopher, David Santosh and Kanna, Rajesh P and Madhusudhana, GR and Venkumar, P and Mohammed, HA (2012) Numerical Investigation of Heat Transfer from a Two-Dimensional Sudden Expansion Flow Using Nanofluids. In: NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 61 (7). pp. 527-546.

Christopher, David Santosh and Madhusudhana, GR and Venkumar, P and Kanna, Rajesh P and Mohammed, HA (2012) Numerical Investigation on Laminar Flow Due to Sudden Expansion Using Nanofluids. In: JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, 9 (12). pp. 2217-2227.

Chua, HT and Toh, HK and Malek, A and Ng, KC and Srinivasan, K (2000) Improved thermodynamic property fields of LiBr-$H_2O$ solution. In: International Journal of Refrigeration, 23 (6). pp. 412-429.

Chua, HT and Toh, HK and Malek, A and Ng, KC and Srinivasan, K (2000) A general thermodynamic framework for understanding the behaviour of absorption chillers. In: International Journal of Refrigeration, 23 (7). 491 -507.

D

Dabiru, Venkata Rambabu and Chatterjee, Anindya (2012) A Linear S-N Curve with Load Dependent Variance and Explicit Failure Probability. In: JOURNAL OF TESTING AND EVALUATION, 40 (4). pp. 557-564.

Dakshina Murthy, HB and Raghavan, MR (1974) real area of contact and compliance of rough cylinders in compression. In: Wear, 27 (1). pp. 47-60.

Das, SL and Chatterjee, A (2002) An alternative stability analysis technique for the simplest walker. In: Nonlinear Dynamics, 28 (3-4). pp. 273-284.

Das, D and Arakeri, JH (2000) Unsteady Laminar Duct Flow With a Given Volume Flow Rate Variation. In: Journal of Applied Mechanics, 67 (2). pp. 274-281.

Das, D and Sreenivas, KR and Arakeri, JH and Srinivasan, J (1993) On The Bifurcation of Laminar Buoyant Jets Discharged Horizontally. In: 3rd World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, OCT 31-NOV 05, 1993, HONOLULU, HI.

Das, Debopam and Arakeri, Jaywant H (1998) Transition of unsteady velocity profiles with reverse flow. In: Journal of Fluid Mechanics, 374 . pp. 251-283.

Das, Kallol and Narasimhan, R (1996) A finite element analysis of plane strain dynamic crack growth at a ductile-brittle interface. In: International Journal of Fracture, 81 (4). pp. 321-341.

Das, P and Samanta, SK and Chattopadhyay, H and Sharma, BB and Dutta, P (2013) Eulerian two-phase flow simulation and experimental validation of semisolid slurry generation process using cooling slope. In: MATERIALS SCIENCE AND TECHNOLOGY, 29 (1). pp. 83-92.

Das, PK and Bhat, GS and Arakeri, VH (1987) Investigations on the propagation of free surface boiling in a vertical superheated liquid column. In: International Journal of Heat and Mass Transfer, 30 (4). pp. 631-638.

Das, Prashant and Govardhan, RN and Arakeri, JH (2013) Effect of hinged leaflets on vortex pair generation. In: Journal of Fluid Mechanics, 730 . pp. 626-658.

Das, Prosenjit and Kumar, Manish and Samanta, Sudip K and Dutta, Pradip and Ghosh, Debashis (2014) Semisolid Processing of A380 Al Alloy Using Cooling Slope. In: MATERIALS AND MANUFACTURING PROCESSES, 29 (4). pp. 422-428.

Das, Prosenjit and Samanta, Sudip K and Chattopadhyay, Himadri and Dutta, Pradip (2012) Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy. In: ACTA METALLURGICA SINICA-ENGLISH LETTERS, 25 (5). pp. 329-339.

Das, Prosenjit and Samanta, Sudip K and Chattopadhyay, Himadri and Pradip, Dutta (2012) Studies on rheocasting using cooling slope. In: 12th International Conference on Semi-Solid Processing of Alloys and Composites, 8-11 October, 2012, Cape Town, South Africa.

Das, Prosenjit and Samanta, Sudip K and Das, Reeta and Dutta, Pradip (2014) Optimization of degree of sphericity of primary phase during cooling slope casting of A356 Al alloy: Taguchi method and regression analysis. In: MEASUREMENT, 55 . pp. 605-615.

Das, Prosenjit and Samanta, Sudip K and Venkatpathi, BRK and Chattopadhyay, Himadri and Dutta, Pradip (2012) Microstructural Evolution of A356 Al Alloy During Flow Along a Cooling Slope. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 65 (6, SI). pp. 669-672.

Das, Prosenjit and Samanta, Sudip Kumar and Kumar, Pramod and Dutta, Pradip (2014) Phase Field Simulation of Equiaxed Microstructure Formation during Semi-solid Processing of A380 Al Alloy. In: ISIJ INTERNATIONAL, 54 (7). pp. 1601-1610.

Das, SL and Chatterjee, A (2003) Multiple Scales via Galerkin Projections:Approximate Asymptotics for Strongly Nonlinear Oscillations. In: Nonlinear Dynamics, 32 (2). pp. 161-186.

Das, SL and Chatterjee, A (2002) Multiple scales without center manifold reductions for delay differential equations near Hopf bifurcations. In: Nonlinear Dynamics, 30 (4). pp. 323-335.

Das, SP and Chakraborty, S and Dutta, P (2002) Natural Convection in a Two-Dimensional Enclosure Heated Symmetrically from Both Sides. In: International Communications in Heat and Mass Transfer, 29 (3). pp. 345-354.

Das, SP and Chakraborty, S and Dutta, P (2004) Studies on Thermal Stratification Phenomenon in $LH_2$ Storage Vessel. In: Heat Transfer Engineering, 25 (4). 54 - 66.

Das, SP and Srinivasan, U and Arakeri, JH (2013) Unsteady separation and vortex shedding from a laminar separation bubble over a bluff body. In: Journal of Fluids and Structures, 40 . pp. 233-245.

Das, Sarmistha and Biswas, SK (2004) Boundary Lubricated Tribology of an Aluminum-Silicon Alloy Sliding Against Steel. In: Tribology Letters, 17 (3). pp. 623-628.

Das, Sarmistha and Varalakshmi, K and Jayaram, V. and Biswas, SK (2007) Ultra Mild Wear in Lubricated Tribology of an Aluminium Alloy. In: Journal of Tribology, 129 (4). pp. 942-951.

Dasappa, S and Paul, PJ and Mukunda, HS and Shrinivasa, U (1994) The gasification of wood-char spheres in CO2---N2 mixtures: analysis and experiments. In: Chemical Engineering Science, 49 (2). pp. 223-232.

Dasappa, S and Shrinivasa, U and Baliga, BN and Mukunda, H (1989) Five-kilowatt wood gasifier technology: Evolution and field experience. In: Sadhana, 14 (3). pp. 187-212.

Dasarathy, BV and Srinivasan, P (1969) On the study of a third-order mechanical oscillator. In: Journal of Sound and Vibration, 9 (1). pp. 49-52.

Dasarathy, BV and Srinivasan, P (1968) Study of a class of non-linear systems reducible to equivalent linear systems. In: Journal of Sound and Vibration, 7 (1). pp. 27-30.

Dasarathy, BV and Srinivasan, P (1968) A new approach to the study of non-linear non-autonomous systems. In: Journal of Sound and Vibration, 8 (1). pp. 103-107.

Dasgupta, Bhaskar and Mruthyunjaya, TS (1998) Closed-Form Dynamic Equations of the General Stewart Platform through the Newton–Euler Approach. In: Mechanism and Machine Theory, 33 (7). pp. 993-1012.

Dasgupta, Bhaskar and Mruthyunjaya, TS (1998) Force redundancy in parallel manipulators: Theoretical and practical issues. In: Mechanism and Machine Theory, 33 (06). pp. 727-742.

Dasgupta, Bhaskar and Mruthyunjaya, TS (1998) Singularity-free path planning for the Stewart platform manipulator. In: Mechanism and Machine Theory, 33 (06). pp. 711-725.

Dasgupta, Bhaskar and Mruthyunjaya, TS (1994) Solution to the forward instaneous kinematics for a general 6-dof stewart platform - commen. In: Mechanism and Machine Theory, 29 (2). 341-341 .

Dasgupta, Bhaskar and Mruthyunjaya, TS (2000) The Stewart platform manipulator: a review. In: Mechanism and Machine Theory, 35 (1). pp. 15-40.

Dasgupta, Bhaskar and Mruthyunjaya, TS (1994) A canonical formulation of the direct position kinematics problem for a general 6-6 stewart platform. In: Mechanism and Machine Theory, 29 (6). 819 -827.

De, D and Narasimhan, R (1998) Analysis of an interface fracture specimen for adhesively bonded joints. In: International Journal of Fracture, 92 (3). L35-L40.

Deb, Manan and Sen, Dibakar (2014) Design of double toggle switching mechanisms. In: MECHANISM AND MACHINE THEORY, 71 . pp. 163-190.

Deb, Manan and Sen, Dibakar (2013) Parametric study of the behavior of double toggle switching mechanisms. In: MECHANISM AND MACHINE THEORY, 63 . pp. 8-27.

Deepak, Sangamesh R (2009) A Global Constraint On Relative Rotation To Avoid Lumped Compliant Mechanisms In Topology Optimization. In: 32nd Annual Mechanisms and Robotics Conference, AUG 03-06, 2008, New York, pp. 227-235.

Deepak, SR and Ananthasuresh, GK (2009) Static Balancing of Spring-loaded Planar Revolute-joint Linkages without Auxiliary Links. In: 14th National Conference on Machines and Mechanisms (NaCoMM-09), December 17-18, 2009, NIT-Durgapur, India.

Deepak, Sangamesh R and Ananthasuresh, GK (2012) Perfect Static Balance of Linkages by Addition of Springs But Not Auxiliary Bodies. In: JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 4 (2).

Deepak, Sangamesh R and Ananthasuresh, GK (2012) Static balancing of a four-bar linkage and its cognates. In: Mechanism and Machine Theory, 48 (1). pp. 62-80.

Deepak, Sangamesh R and Dinesh, M and Ananthasuresh, GK (2008) A Comparative Study of the Formulations for Topology Optimization of Compliant Mechanisms. In: CD-ROM proceedings of the ASME 2008 International Design Engineering Technical Conferences, Aug. 3-6, 2008, New York City, NY, USA., Aug. 3-6, 2008, New York City, NY.

Deepak, Sangamesh R and Ghosal, Ashitava (2008) Special Coordinates Associated With Recursive Forward Dynamics Algorithm for Open Loop Rigid Multibody Systems. In: Jouranl of Applied Mechanics- Transactions of the ASME, 75 (5). 051003-1-051003-11.

Deepu, P and Basu, Saptarshi (2014) Effect of evaporation and agglomeration on droplet shape oscillations. In: CHEMICAL ENGINEERING SCIENCE, 119 . pp. 212-217.

Deepu, P and Basu, Saptarshi (2014) Spectral response of a droplet in pulsating external flow field. In: PHYSICS OF FLUIDS, 26 (2).

Deepu, P and Basu, Saptarshi and Kumar, Ranganathan (2013) Vaporization dynamics of functional droplets in a hot laminar air jet. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 56 (1-2). pp. 69-79.

Deepu, P and Chowdhuri, Shubham and Basu, Saptarshi (2014) Oscillation dynamics of sessile droplets subjected to substrate vibration. In: CHEMICAL ENGINEERING SCIENCE, 118 . pp. 9-19.

Deepu, P and Saha, Abhishek and Kumar, Ranganathan and Basu, Saptarshi (2012) Shape deformation and atomization of functional droplets in contact with a vibrating surface. In: 12th International Conference on Liquid Atomization and Spray Systems, September 2-6, 2012, Heidelberg.

Deshmukh, D and Mohan, Madan A and Anand, TNC and Ravikrishna, RV (2012) Spray characterization of straight vegetable oils at high injection pressures. In: Fuel, 97 . pp. 879-883.

Deshmukh, D and Ravikrishna, RV (2014) Studies on microscopic structure of diesel sprays under atmospheric and high gas pressures. In: INTERNATIONAL JOURNAL OF SPRAY AND COMBUSTION DYNAMICS, 6 (2). pp. 199-219.

Deshmukh, D and Ravikrishna, RV (2013) A method for measurement of planar liquid volume fraction in dense sprays. In: Experimental Thermal and Fluid Science, 46 . pp. 254-258.

Devaprakasam, D and Biswas, SK (2003) Design of a flexure for surface forces apparatus. In: Review of Scientific Instruments, 74 (3). pp. 1228-1233.

Devaprakasam, D and Biswas, SK (2005) Measurement of stiffness and damping constant of self-assembled monolayers. In: Review of Scientific Instruments, 76 (3). 035102-1-035102-7.

Devaprakasam, D and Biswas, SK (2005) Molecular damping: Mechanical response of self-assembled monomolecular layer to compression. In: Physical Review B, 72 (12).

Devaprakasam, D and Khatri, OP and Shankar, N and Biswas, SK (2005) Boundary lubrication additives for aluminium: A journey from nano to macrotribology. In: Tribology International, 38 (11-12). pp. 1022-1034.

Devaprakasam, D and Sampath, S and Biswas, SK (2004) Thermal Stability of Perfluoroalkyl Silane Self-Assembled on a Polycrystalline Aluminum Surface. In: Langmuir, 20 (4). pp. 1329-1334.

Devaraju, A and Elayaperumal, A and Alphonsa, J and Kailas, Satish V and Venugopal, S (2012) Microstructure and dry sliding wear resistance evaluation of plasma nitrided austenitic stainless steel type AISI 316LN against different sliders. In: SURFACE & COATINGS TECHNOLOGY, 207 . pp. 406-412.

Devaraju, A and Perumal, Elaya A and Alphonsa, J and Kailas, Satish V and Venugopal, S (2012) Sliding wear behavior of plasma nitrided Austenitic Stainless Steel Type AISI 316LN in the temperature range from 25 to 400 degrees C at 10(-4) bar. In: WEAR, 288 . pp. 17-26.

Devaraju, Ayyannan and Elayaperumal, Ayyasamy and Venugopal, Srinivasan and Kailas, Satish V and Alphonsa, Joseph (2011) Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 degrees C. In: Strojniski Vestnik / Journal of Mechanical Engineering, 57 (12). pp. 927-935.

Dewan, Anupam and Arakeri, Jaywant H and Srinivasan, J (1997) A new turbulence model for the axisymmetric plume. In: Applied Mathematical Modelling, 21 (11). pp. 709-719.

Dewan, Anupam and Arakeri, Jaywant H and Srinivasan, J (1992) A note on high Schmidt number laminar bouyant jets discharged horizontally. In: International Communications in Heat and Mass Transfer, 19 (5). pp. 721-731.

Dey, J (1987) A note on the series solutions of momentum and energy equations for heat transfer from a semi-infinite plate. In: International Journal of Heat and Mass Transfer, 30 (11). pp. 2444-2445.

Dey, J (1989) A simple technique for approximate solutions of the Falkner-Skan equation. In: Acta Mechanica, 77 (3-4). pp. 299-305.

Dey, J and Das, D (1998) A note on the linear instability of the Blasius flow. In: Acta Mechanica, 128 (3-4). pp. 253-258.

Dey, J and Nath, G (1984) Forced convection heat transfer from a flat plate with an unheated starting length. In: International Journal of Heat and Mass Transfer, 27 (12). pp. 2429-2431.

Dey, J and Nath, G (1982) Forced convection heat transfer over a semi-infinite plate. In: International Journal of Heat and Mass Transfer, 25 (11). pp. 1774-1776.

Dey, J and Nath, G (1981) Mixed Convection Flow On Vertical Surface. In: Warme und Stoffubertragung-Thermo & Fluid Dynamics, 15 (4). pp. 279-283.

Dharuman, C and Arakeri, JH and Srinivasan, Kandadai (2006) Performance evaluation of an integrated solar water heater as an option for building energy conservation. In: Energy and Buildings, 38 (3). pp. 214-219.

Dheeman, Basu and Ashitava, Ghosal (1997) Singularity Analysis of Platform-type Multi-loop Spatial Mechanisms. In: Mechanism and Machine Theory, 32 (3). pp. 375-389.

Dibakar, Sen and Mruthyunjaya, TS (1999) Synthesis of workspaces of planar manipulators with arbitrary topology using shape representation and simulated annealing. In: Mechanism and Machine Theory, 34 (3). pp. 391-420.

Dibakar, Sen and Mruthyunjaya, TS (1999) A computational geometry approach for determination of boundary of workspaces of planar manipulators with arbitrary topology. In: Mechanism and Machine Theory, 34 (1). pp. 149-169.

Dibakar, Sen and TS, Mruthyunjaya (1996) The question of minimax loop-size in planar homogeneous kinematic chains. In: Mechanism and Machine Theory, 31 (6). 821-829 .

Dilip, D and Jha, Narsing K and Govardhan, Raghuraman N and Bobji, MS (2014) Controlling air solubility to maintain `'Cassie'' state for sustained drag reduction. In: COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 459 . pp. 217-224.

Dimri, J and Gurumoorthy, B (2005) Handling sectional views in volume-based approach to automatically construct 3D solid from 2D views. In: International Conference on Geometric Modeling and Processing, APR 13-15, 2004, Beijing.

Dimri, Jitendra and Gurumoorthy, B (2004) Handling Sectional Views in Volume-based Approach to Automatically Construct 3D Solid from 2D Views. In: Geometric Modeling and Processing, 2004, 13-15 April 2004, Beijing, China, pp. 267-278.

Dinesh, M and Ananthasuresh, GK (2008) Displacement Amplifying Compliant Mechanisms for Two-axis High-resolution Monolithic Inertial Sensors. In: CD-ROM proceedings of the ASME 2008 International Design Engineering Technical Conferences, Aug. 3-6, 2008, New York City, NY, USA, Aug. 3-6, 2008, New York City, NY.

Dinesh, M and Ananthasuresh, GK (2007) Shape Memory Alloy Actuation for a Novel Spring-Steel Compliant XY Stage. In: 2nd National ISSS Conference on MEMS, Microsensors, Smart Materials, Structures, and Systems, , Nov. 16-17, 2007, Pilani, India.

Dinesh, M and Ananthasuresh , GK (2010) Micro-mechanical stages with enhanced range. In: Springer, 2 (1-2). pp. 35-43.

Dulhani, Jay P and Sarkar, Sandip and Dalai, Amaresh (2014) Effect of angle of incidence on mixed convective wake dynamics and heat transfer past a square cylinder in cross flow at Re=100. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 74 . pp. 319-332.

Dutta, P (2006) Modelling of Transport Phenomena in Dissimilar Welding of Aluminium Alloys. In: 8th International Seminar Numerical Analyses of Weldability, 25-27 Sep 2006, Seggau Graz Austria.

Dutta, P (2006) Transport Phenomena in Laser Surface Alloying. In: Invited Keynote Lecture, Seminar on Application of Laser in Materials Processing, Feb 2-3 2006, Jadavpur University, Kolkata.

Dutta, P and Kumar, A (2009) Influence of Solid Phase Movement and Melt Convection on Macrosegregation and Microstructure Formation. In: 4th International Conference on Solidification Science and Processing , November 20-23, 2009.

Dutta, P and Murthy, KSS (2009) Semisolid Manufacturing. In: 57th Indian Foundry Congress, Feb. 13-15, 2009, Kolkata.

Dutta, P and Murthy, KSS and Kumar, P (2007) Squeeze Casting and Semi-solid Forming: New Developments. In: International Conference on Aluminium (INCAL), , Nov. 21-23, 2007, Hyderabad.

Dwarakanath, TA and Dasgupta, Bhaskar and Mruthyunjaya, TS (2001) Design and development of a Stewart platform based force– torque sensor. In: Mechatronics, 11 (7). pp. 793-809.

Dwarakanath, TA and Ghosal, A and Shrinivasa, U (1994) Kinematic analysis and design of articulated manipulators with joint motion constraints. In: Journal of Mechanical Design, 116 (3). pp. 969-972.

E

Easwaran, V and Gupta, VH and Munjal, ML (1993) Relationship Between The Impedance Matrix And The Transfer Matrix With Specific Reference To Symmetrical, Reciprocal And Conservative Systems. In: Journal of Sound and Vibration, 161 (3). pp. 515-525.

Easwaran, V and Gupta, VH and Munjal, ML (1994) The relationship between reciprocal and symmetrical systems - reply. In: Journal of Sound and Vibration, 170 (4). pp. 568-570.

Easwaran, V and Munjal, ML (1993) Analysis of reflection characteristics of a normal incidence plane wave on resonant sound absorbers: A finite element approach. In: Journal of the Acoustical Society of America, 93 (3). pp. 1308-1318.

Easwaran, V and Munjal, ML (1993) Finite element analysis of wedges used in anechoic chambers. In: Journal of Sound and Vibration, 160 (2). pp. 333-350.

Easwaran, V and Munjal, ML (1992) Plane wave analysis of conical and exponential pipes with incompressible mean flow. In: Journal of Sound and Vibration, 152 (1). pp. 73-93.

Easwaran, V and Munjal, ML (1991) Transfer matrix modeling of hyperbolic and parabolic ducts with incompressible mean flow. In: Journal of the Acoustical Society of America, 90 (4).

Easwaran, V and Munjal, ML (1995) A note on the effect of wall compliance on lowest?order mode propagation in fluid?filled/submerged impedance tubes. In: Journal of the Acoustical Society of America, 97 (6). pp. 3494-3501.

F

Freund, Jonathan and Tiwari, Arpit and Shukla, Ratnesh and Pantano, Carlos (2011) Interface capturing simulations of acoustically driven bubble dynamics in and near tissue. In: 161st Meeting of the Acoustical Society of America, 2011.

G

Gadag, SP and Srinivasan, MN (1995) Cavitation erosion of laser-melted ductile iron. In: Journal of Materials Processing Technology, 51 (1-4). pp. 150-163.

Gadag, SP and Srinivasan, MN (1994) Dry sliding wear and friction: laser-treated ductile iron. In: Wear, 173 (1-2). pp. 21-29.

Gadag, SP and Srinivasan, MN (1996) Surface properties of laser processed ductile iron. In: Applied Physics A:Materials Science and Processing, 63 (4). pp. 409-414.

Gadag, SP and Srinivasan, MN and Mordike, BL (1995) Effect of laser processing parameters on the structure of ductile iron. In: Materials Science and Engineering A, 196 (1-2). pp. 145-154.

Garg, Manish and Ravikrishna, RV (2014) Effect of port gas injection on in-cylinder stratification in a CNG fuelled SI engine. In: PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, 14 (4). pp. 244-258.

Garg, P and Srinivasan, K and Dutta, P and Kumar, P (2014) Comparison of CO2 and steam in transcritical Rankine cycles for concentrated solar power. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 1138-1146.

Garg, Pardeep and Kumar, Pramod and Srinivasan, Kandadai (2013) Supercritical carbon dioxide Brayton cycle for concentrated solar power. In: Journal of Supercritical Fluids, 76 . pp. 54-60.

Garg, Pardeep and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2013) Evaluation of carbon dioxide blends with isopentane and propane as working fluids for organic Rankine cycles. In: Applied Thermal Engineering, 52 (2). pp. 439-448.

Garg, Pardeep and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2013) Evaluation of isopentane, R-245fa and their mixtures as working fluids for organic Rankine cycles. In: APPLIED THERMAL ENGINEERING, 51 (1-2). pp. 292-300.

Gavara, Madhusudhana (2012) Asymmetric forced convection of nanofluids in a channel with symmetrically mounted rib heaters on opposite walls. In: Numerical Heat Transfer, Part A: Applications, 62 (11). pp. 884-904.

Gavara, Madhusudhana (2012) Natural Convection in a Vertical Channel with Arrays of Flush-Mounted Heaters on Opposite Conductive Walls. In: NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 62 (2). pp. 111-135.

Gavara, Madhusudhana (2012) Natural convection in a series of thermally interacting cavities with wall mounted heaters. In: Numerical Heat Transfer, Part A, 62 (11). pp. 861-883.

Gavara, Madhusudhana and Kanna, Parthasarathy Rajesh (2014) Three-Dimensional Study of Natural Convection in a Horizontal Channel With Discrete Heaters on One of Its Vertical Walls. In: HEAT TRANSFER ENGINEERING, 35 (14-15,). pp. 1235-1245.

Gavara, Madhusudhana and Kanna, Rajesh P (2012) Study of conjugate natural convection between vertical coaxial rectangular cylinders. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 39 (7). pp. 904-912.

Gavara, Madhusudhana R and Dutta, Pradip and Seetharamu, KN (2012) Mixed convection adjacent to non-isothermal vertical surfaces. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 55 (17-18). pp. 4580-4587.

Gelli, Vikram NVR and Bobji, MS and Mohan, S (2014) Effect of contact stresses on shape recovery of NiTiCu thin films. In: THIN SOLID FILMS, 564 . pp. 306-313.

Ghara, Mahua and Kundanati, Lakshminath and Borges, Renee M (2011) Nature's Swiss Army Knives: Ovipositor Structure Mirrors Ecology in a Multitrophic Fig Wasp Community. In: PLos One, 6 (8).

Ghorai, S and Panda, MK (2013) Bioconvection in an anisotropic scattering suspension of phototactic algae. In: EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 41 . pp. 81-93.

Ghosal, AK and Narasimhan, R (1997) An approximate analysis of notch-tip deformation under mixed-mode loading in ductile solids. In: Transactions of the ASME: Journal of Applied Mechanics, 64 (3). pp. 695-696.

Ghosal, Ashitava (2006) Robotics: Fundamental Concepts and Analysis. Oxford University Press.

Ghosal, A and Desa, S (1993) Dynamical Resolution of Redundancy for Robot Manipulators. In: Journal of Mechanical Design, 115 (3). pp. 592-598.

Ghosal, AK and Biswas, SK (1993) Examination of Stress-Fields In Elastic Plastic Indentation. In: Philosophical Magazine Part B: Physics of Condensed Matter. Electronics, Optical and Magnetic Properties, 67 (3). pp. 371-387.

Ghosal, AK and Narasimhan, R (1996) Mixed-mode fracture initiation in a ductile material with a dual population of second-phase particles. In: Materials Science & Engineering A Structural Materials: Properties, Microstructure and Processing, 211 (1-2). pp. 117-127.

Ghosal, AK and Narasimhan, R (1996) Numerical Simulations of Hole Growth and Ductile Fracture Initiation Under Mixed-Mode Loading. In: International Journal of Fracture, 77 (4). pp. 281-304.

Ghosal, AK and Narasimhan, R (1994) A finite element analysis of mixed-mode fracture initiation by ductile failure mechanisms. In: Journal of the Mechanics and Physics of Solids, 42 (6). pp. 953-978.

Ghosal, AK and Narasimhan, R (1997) A finite element study of the effect of void initiation and growth on mixed-mode ductile fracture. In: Mechanics of Materials, 25 (2). pp. 113-127.

Ghosal, Ashitava and Ravani, Bahram (2001) A differential-geometric analysis of singularities of point trajectories of serial and parallel manipulators. In: Journal of Mechanical Design, 123 (1). pp. 80-89.

Ghosh, M and Husain, Md M and Kumar, K and Kailas, SV (2013) Friction Stir-Welded Dissimilar Aluminum Alloys: Microstructure, Mechanical Properties, and Physical State. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (12). pp. 3890-3901.

Ghosh, M and Kar, A and Kumar, K and Kailas, SV (2012) Structural characterisation of reaction zone for friction stir welded aluminium-stainless steel joint. In: Materials Technology, 27 (2). pp. 169-172.

Ghosh, M and Kar, A and Kumar, K and Kailas, SV and Das, SK and Ray, AK (2008) Evaluation of interface microstructure for friction stir welding aluminium-stainless steel plate. In: The International Conference 'INCOME', Jamshedpur, December, Jamshedpur.

Ghosh, M and Kumar, K and Kailas, SV and Raychaudhuri, AK (2010) Optimization of friction stir welding parameters for dissimilar aluminum alloys. In: Materials & Design, 31 (6). pp. 3033-3037.

Ghosh, Siddharth and Ananthasuresh, GK (2012) Note on high aspect-ratio SU-8 micromechanical structures using mask-less direct laser writing. In: ASME 2012 International Manufacturing Science and Engineering Conference, June 4–8, 2012, Notre Dame, Indiana, USA.

Giri, A and Narasimham, GSVL and Krishna Murthy, MV (2003) Combined natural convection heat and mass transfer from vertical fin array. In: International Journal of Heat and Fluid Flow, 24 (1). pp. 100-113.

Giri, Asis and Arakeri, Vijay H (1998) Measured pulse width of sonoluminescence flashes in the form of resonance radiation. In: Physical Review E, 58 (3). R2713-R2716.

Gogate, GR and Munjal, ML (1995) Analytical And Experimental Aeroacoustic Studies Of Open-Ended 3-Duct Perforated Elements Used In Mufflers. In: Journal Of The Acoustical Society Of America, 97 (5). pp. 2919-2927.

Gogate, GR and Munjal, ML (1993) Analytical solution of sound propagation in lined or unlined circular ducts with laminar mean flow. In: Journal of Sound and Vibration, 160 (3). pp. 465-484.

Gogate, GR and Munjal, ML (1992) Analytical solution of the laminar mean flow wave equation in a lined or unlined two-dimensional rectangular duct. In: Journal of the Acoustical Society of America, 92 (5). pp. 2915-2923.

Gogate, GR and Munjal, ML (1996) Sound propagation in ducts with bulk reacting lining in the presence of laminar mean flow. In: Journal of the Acoustical Society of America, 99 (3). pp. 1779-1782.

Gopalan, E Veena and Malini, KA and Kumar, D Sakthi and Yoshida, Yasuhiko and Al-Omari, IA and Saravanan, S and Anantharaman, MR (2009) On the dielectric dispersion and absorption in nanosized manganese zinc mixed ferrites. In: nternational Conference on Nanoscience and Nanotechnology, FEB 25-29, 2008, Melbourne, Australia.

Gorthi, Subrahmanyam and Mohanty, Atanu and Chatterjee, Anindya (2006) Cantilever beam electrostatic MEMS actuators beyond pull-in. In: Journal of Micromechanics and Microengineering, 16 (9). pp. 1800-1810.

Gotkhindi, Tejas P and Simha, KRY (2013) Transverse elastic response of bundled coated cylinders. In: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 76 . pp. 70-85.

Gourvenec, SM and Vulpe, C and Murthy, TG (2014) A method for predicting the consolidated undrained bearing capacity of shallow foundations. In: GEOTECHNIQUE, 64 (3). pp. 215-225.

Goutham, VSH and Munjal, ML (2009) Prediction of break-out noise from a finite distorted circular duct. In: UNSPECIFIED, November 2009, Hyderabad.

Govardhan, RN and Williamson, CHK (2006) Defining the 'modified Griffin plot' in vortex-induced vibration: revealing the effect of Reynolds number using controlled damping. In: Journal of Fluid Mechanics, 561 . pp. 147-180.

Govardhan, R and Williamson, CHK (2004) Critical mass in vortex-induced vibration of a cylinder. In: European Journal of Mechanics - B/Fluids, 23 (1).

Govardhan, RN and Arakeri, JH (2011) Fluid Mechanics of Aquatic Locomotion at Large Reynolds Numbers. In: Journal of the Indian Institute of Science, 91 (3). pp. 429-452.

Govardhan, RN and Srinivas, GS and Asthana, A and Bobji, MS (2009) Time dependence of effective slip on textured hydrophobic surfaces. In: Physics of Fluids, 21 (5).

Govardhan, RN and Williamson, CHK (2006) Defining the ‘modified Griffin plot’ in vortex-induced vibration: revealing the effect of Reynolds number using controlled damping. In: Journal of Fluid Mechanics, 561 . pp. 147-180.

Govardhan, RN and Williamson, CHK (2005) Vortex-induced vibrations of a sphere. In: Journal of Fluid Mechanics, 531 . pp. 11-47.

Govardhan, Raghuraman N and Pawar, Pradeep S and Bobji, Musuvathi S (2011) Sustainability of apparent slip in micro-channel flows. In: 3rd Micro and Nano Flows Conference, 22-24 August 2011, Thessaloniki, Greece.

Govinda Ram, HS and Arakeri, VH (1990) Studies on Unsteady Pressure Fields in the Region of Separating and Reattaching Flows. In: Journal of Fluids Engineering, 112 (4). pp. 402-408.

Gowda, BS and Narasimham, GSVL and Murthy, MVK (1997) Forced-air precooling of spherical foods in bulk: A parametric study. In: International Journal of Heat and Fluid Flow, 18 (6). pp. 613-624.

Gu, Xin and Basu, Saptarshi and Kumar, Ranganathan (2012) Analysis of a collision model in a Co-Axial liquid fuel spray in a heated air chamber. In: 12th International Conference on Liquid Atomization and Spray Systems, September 2-6, 2012, Heidelberg, Germany.

Gu, Xin and Basu, Saptarshi and Kumar, Ranganathan (2012) Correlations of vaporization performance of conventional and biofuel sprays in a crossflow heated chamber. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 39 (10). pp. 1478-1486.

Gu, Xin and Basu, Saptarshi and Kumar, Ranganathan (2012) Dispersion and vaporization of biofuels and conventional fuels in a crossflow pre-mixer. In: International Journal of Heat and Mass Transfer, 55 (1-3). pp. 336-346.

Gu, Xin and Basu, Saptarshi and Kumar, Ranganathan (2012) Vaporization and collision modeling of liquid fuel sprays in a co-axial fuel and air pre-mixer. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 55 (19-20). pp. 5322-5335.

Gudla, Pradeep K and Sonti, Venkata R and Chatterjee, Anindya (2003) Feedforward control of acausal systems under broadband deterministic forcing. In: SPIE: Smart Materials, Structures, and Systems, 12-14 December, Bangalore, India, Vol.5062, 613-620.

Gunda, R and Biswas, SK and Bhowmick, S and Jayaram, V (2005) Mechanical Properties of Rough TiN Coating Deposited on Steel by Cathodic Arc Evaporation Technique. In: Journal of The American Ceramic Society, 88 (7). pp. 1831-1837.

Gundiah, Namrata and Babu, Anju R and Pruitt, Lisa A (2013) Effects of elastase and collagenase on the nonlinearity and anisotropy of porcine aorta. In: PHYSIOLOGICAL MEASUREMENT, 34 (12). pp. 1657-1673.

Gundiah, Namrata and Narasimhan, Arunn and Dutta, Pradip (2011) Macromolecular Transport Through Porous Arterial Walls. In: Journal of the Indian Institute of Science, 91 (3). pp. 367-382.

Gupta, SC and Arora, PR (1992) Analytical and numerical solutions of inward spherical solidification of a superheated melt with radiative-convective heat transfer and density jump at freezing front. In: Warme und Stoffubertragung-Thermo & Fluid Dynamics, 27 (6). pp. 377-384.

Gupta, SC and Arora, PR (1988) Outward spherical solidification of a superheated melt with time dependent boundary flux. In: Applied Scientific Research, 45 (1). 17 -31.

Gupta, VH (1995) On Independence of Reciprocity Symmetry and conservativeness of One-Dimensional Linear Systems. In: Journal of Sound and Vibration, 179 (3). pp. 547-552.

Gupta, VH (1995) A note on three-dimensional effects in segmentation approach for analysis of one-dimensional waves in ducts of varying cross-sectional area. In: Journal of Sound and Vibration, 182 (2). pp. 323-327.

Gupta, VH and Easwaran, V and Munjal, ML (1995) A Modified Segmentation Approach for Analyzing Plane Wave Propagation in Non-Uniform Ducts with Mean Flow. In: Journal of Sound and Vibration, 182 (5). pp. 697-707.

Gupta, VH and Munjal, ML (1993) Time-domain-finite-wave analysis of the engine exhaust system by means of the stationary-frame method of characteristics. Part I. Theory. In: Sadhana : Academy Proceedings in Engineering Sciences, 18 (Part 6). pp. 911-925.

Gupta, VH and Munjal, ML (1993) Time-domain-finite-wave analysis of the engine exhaust system by means of the stationary-frame method of characteristics. Part II. Computed results and experimental corroboration thereof. In: Sadhana : Academy Proceedings in Engineering Sciences, 18 (Part 6). pp. 927-941.

Gupta, VH and Munjal, ML (1992) On numerical prediction of the acoustic source characteristics of an engine exhaust system. In: Journal of the Acoustical Society of America, 92 (5). pp. 2716-2725.

Gurao, NP and Suwas, Satyam (2012) Deformation behaviour of Titanium in torsion. In: 16th International Conference on the Textures of Materials (ICOTOM 16), DEC 12-17, 2011, Indian Inst Technol Bombay, Mumbai, INDIA, pp. 826-829.

Gurumoorthy, B and Nagaraj, H (2001) Automatic Extraction of Machining Primitives with Respect to Preformed Stock for Process Planning. In: Journal of Manufacturing Systems, 20 (3). pp. 210-222.

Guruprasad, A and Sudhakar, A and Seshan, S and Muthukumarasamy, S (1996) Structure and properties of zinc alloy based metal matrix composites. In: Symposium on Processing and Fabrication of Advanced Materials IV, 29 Oct.-2 Nov. 1995, Cleveland, Ohio; USA.

Gururaja, GJ and Tirunarayanan, MA and Ramachandran, Arcot (1967) Dynamic viscosity of gas mixtures. In: Journal of Chemical and Engineering, 12 (4). pp. 562-567.

H

Hariharan, R and Nagaraj, HS (1974) Synchronous decade up/down counter. In: International Journal of Electronics, 36 (6). pp. 805-809.

Hariharan, R and Kulkarni, VD (1982) A Microprocessor-Based Pulse-Height Analyzer. In: IEEE Micro, 2 (3). pp. 86-91.

Hariharan, R and Memon, KAP (1979) A Hydraulic Micromanipulator. In: IEEE Transactions on Biomedical Engineering, 26 (1). pp. 56-58.

Hariharan, R and Memon, KAP (1979) A Hydraulic Micromanipulator. In: IEEE Transactions on Biomedical Engineering, 26 (1). pp. 56-58.

Hariharan, R and Menon, KAP (1978) A Fluidic Drive System for Intra-Aortic Balloon Heart Assist Device. In: IEEE Transactions on Biomedical Engineering, BME-25 (3). pp. 301-303.

Hariharan, R and Menon, KAP (1978) A Nonmoving-Part Fluidic Display Using Photoelastic Effect. In: Transactions on Instrumentation and Measurement, 27 (1). pp. 68-70.

Hariharan, R and Rao, KS and Bhattacharjee, JN (1978) Design of A Microprocessor-Based numerical control-system. In: IEEE Transactions on Industrial Electronics and Control Instrumentation, 25 (4). 355-362 .

Hariharan, R and Rao, SN (1974) Biquadratic pulse transmission networks. In: India, IEE-IERE Proceedings - , 12 (4). pp. 136-138.

Hariharan, R and Sastry, Adisesha P (1979) Position and Feed-Rate Control for Contouring Numerical-Control Systems. In: IEEE Transactions on Industrial Electronics and Control Instrumentation, 26 (2). pp. 79-82.

Hariharan, Ramesh and Bhaskar, Majumdar S (1978) Moiré Displacement Transducer for N/C Systems. In: Transactions on Instrumentation and Measurement, 27 (1). pp. 8-10.

Harish, J and Dutta, P (2005) Heat transfer analysis of pusher type reheat furnace. In: ronmaking and Steelmaking, 32 (2). pp. 151-158.

Havemann, HA and Rao, MRK and Natarajan, A and Narasimhan, TL (2008) Alcohol in Diesel Engines. In: Journal of Indian Institute of Science, 88 (3). pp. 820-826.

Havemann, HA and Rao, MRK and Natarajan, A and Narasimhan, TL (2008) Alcohol with Normal Diesel Fuels-Part II, Gas and Oil Power. In: Journal of Indian Institute of Science, 88 (3). pp. 827-832.

Hegde, S and Ananthasuresh, GK (2007) Topology Optimization of Compliant Micromechnisms with Manufaturing Constraints Imposed by the Wet Ecthing of (110) Silicon. In: 2nd National ISSS Conference on MEMS, Microsensors, Smart Materials, Structures, and Systems, , Nov. 16-17, 2007, Pilani, India.

Hegde, Sudarshan and Ananthasuresh, GK (2010) Design of Single-Input-Single-Output Compliant Mechanisms for Practical Applications Using Selection Maps. In: Journal of Mechanical Design, 132 (8).

Hegde, Sudarshan and Ananthasuresh, GK (2008) Topology Optimization of Micromachined Structures with the Manufacturing Constraints of KOH Etching of (110) Silicon. In: CD-ROM proceedings of the ASME 2008 International Design Engineering Technical Conferences, Aug. 3-6, 2008, New York City, NY, USA., Aug. 3-6, 2008, New York City, NY.

Hegde, Sudarshan and Ananthasuresh, GK (2012) A spring-mass-lever model, stiffness and inertia maps for single-input, single-output compliant mechanisms. In: MECHANISM AND MACHINE THEORY, 58 . pp. 101-119.

Himabindu, M and Ravikrishna, RV (2010) Potential of bio-DME as a transportation fuel for India. In: Journal of Renewable and Sustainable Energy, 2 (5).

Hota, RN and Munjal, ML (2008) Intake source characterization of a compression ignition engine: Empirical expressions. In: Noise Control Engineering Journal, 56 (2). pp. 92-106.

Hota, RN and Munjal, ML (2004) A New Hybrid Approach for the Thermo-Acoustic Modelling of Engine Exhaust Systems. In: International Journal of Acoustics and Vibration, 9 (3). pp. 129-38.

Hota, RN and Munjal, ML (2006) Prediction of the exhaust noise of an automotive engine and insertion loss of commercial mufflers using hybrid approach. In: NSA 2006, 16-17 Nov 2006, NPL, New Delhi.

Hota, RN and Munjal, ML and Mukherjee, NK (2008) Evaluation of engine acoustic source characteristics using AVL BOOST software. In: AVL Advanced Simulation Technologies Indian User Conference 2008.

I

Ing, Dr and Havemann, HA and Narasimhan, TL (1957) Verbrennung and Vergasung Schwerer flussiger Kraftstoffe Einer Wirbelkammer. In: Journal of the Indian Institute of Science, 18 (7). pp. 208-214.

Inkson, BJ and Wang, JJ and Anantheshwara, A and Bobji, MS and Lockwood, AJ (2012) Friction induced phase transformations at surfaces characterised in-situ by TEM nanotribology. In: 10th Asia-Pacific Microscopy Conference, Feb 5-9, 2012, Perth, Australia.

Islam, SKS and Wijeysundera, NE and Chou, SK and Srinivasan, K (2002) Estimation of thermal moisture diffusivity from liquid redistribution measurements. In: Journal of Porous Media, 5 (4). pp. 240-251.

Iwai, Y and Honda, T and Miyajima, T and Iwasaki, Y and Surappa, MK and Xu, JF (2000) Dry sliding wear behavior of $Al_{2}O_{3}$ fiber reinforced aluminum composites. In: Composites Science and Technology, 60 (09). pp. 1781-1789.

Iyengar, KT Sundara Raja and Raman, PV (1980) Steady-State Response of Thick Rectangular Plates. In: Journal of the Engineering Mechanics Division, 106 (4). pp. 842-844.

J

Jacob, S and Karunanithi, R and Narsimham, GSVL and Kranthi, Kumar J and Damu, C and Praveen, T and Samir, M and Mallappa, A (2013) Studies on an improved indigenous pressure wave generator and its testing with a pulse tube cooler. In: Advances in Cryogenic Engineering, 17–21 June 2013, Anchorage, Alaska, USA.

Jaidi, J and Dutta, P (2001) Modeling of Transport Phenomena in a Gas Metal Arc Welding Process. In: Numerical Heat Transfer, Part A: Applications, 40 (5). pp. 543-562.

Jain, J and Dutta, P and Kumar, A (2006) Numerical simulation of Freckles Formation during Directional Solidification of Aqueous Ammonium Chloride. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.

Jain, Jayesh and Kumar, Arvind and Dutta, Pradip (2007) Numerical studies on channel formation and growth during solidification: Effect of process parameters. In: Journal of Heat Transfer, 129 (4). pp. 548-558.

Jain, Rajeev and Ramachandra, K and Simha, KRY (2004) Impact on spinning discs. In: Eighth International Symposium on Plasticity and Impact Mechanics (IMPLAST 2003), MAR 16-19, 2003, New Delhi, INDIA.

Jain, Rajeev and Ramachandra, K and Simha, KRY (1999) Rotating anisotropic disc of uniform strength. In: International Journal of Mechanical Sciences, 41 (6). 639-648 .

Jain, Rajeev and Ramachandra, K and Simha, KRY (2000) Singularity in rotating orthotropic discs and shells. In: International Journal of Solids and Structures, 37 (14). pp. 2035-2058.

Janardhana, MN and Biswas, SK (1979) Modes of deformation in aluminium rings subjected to static axial compression. In: International Journal of Mechanical Sciences, 21 (12). pp. 699-712.

Jasvanth, VS and Ambirajan, Amrit and Adoni, AA and Kumar, D and Gupta, PP and Bhandari, DR and Dutta, Pradip (2008) Experimental Results from a Three-port Acetone CPL with Tubular Axially Grooved evaporator. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Jasvanth, VS and Ambirajan, Amrit and Kumar, Dinesh and Arakeri, Jaywant H (2013) Effect of Heat Pipe Figure of Merit on an Evaporating Thin Film. In: JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 27 (4). pp. 633-640.

Jatana, Gurneesh Singh and Himabindu, M and Thakur, Hari S and Ravikrishna, RV (2014) Strategies for high efficiency and stability in biogas-fuelled small engines. In: EXPERIMENTAL THERMAL AND FLUID SCIENCE, 54 . pp. 189-195.

Jaya, Nagamani B and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) A new method for fracture toughness determination of graded (Pt,Ni)Al bond coats by microbeam bend tests. In: PHILOSOPHICAL MAGAZINE, 92 (25-27,). pp. 3326-3345.

Jayadeep, UB and Bobji, MS and Jog, CS (2014) Energy Loss in the Impact of Elastic Spheres on a Rigid Half-Space in Presence of Adhesion. In: TRIBOLOGY LETTERS, 53 (1). pp. 79-89.

Jayadeep, UB and Bobji, MS and Jog, CS (2014) Energy loss due to adhesion in longitudinal impact of elastic cylinders. In: EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 45 . pp. 20-31.

Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2002) Constraint loss under dynamic loading in rate independent plastic solids. In: International Journal of Fracture, 116 (2). pp. 141-160.

Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2002) Effect of T-stress and loading rate on crack initiation in rate sensitive plastic materials. In: International Journal of Solids and Structures, 39 (7). pp. 1757-1775.

Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2003) The effect of T-stress on plane strain dynamic crack growth in elastic-plastic materials. In: Fatigue and Fracture of Engineering Materials and Structures, 26 (7). pp. 647-660.

Jayakumari, HB and Munjal, ML and Sachdev, PL (1982) The flow structure of a nearly ideally expanded supersonic jet with mean shear. In: Journal of Sound and Vibration, 81 (3). pp. 437-440.

Jayalakshmi, S and Kailas, SV and Seshan, S and Kumar, K and Srivatsan, TS (2005) Damage Tolerant Magnesium Metal Matrix Composites: Influence of Reinforcement and Processing. In: Materials and Manufacturing Processes, 20 (5). pp. 747-760.

Jayalakshmi, S and Kailas, SV and Seshan, S (2003) Properties of squeeze cast Mg-10Al-Mn alloy and its alumina short fibre composites. In: Journal of Materials Science, 38 (7). pp. 1383-1389.

Jayalakshmi, S and Kailas, SV and Seshan, S (2002) Tensile behaviour of squeeze cast AM100 magnesium alloy and its $Al_2O_3$ fibre reinforced composites. In: Composites Part A: Applied Science and Manufacturing, 33 (8). pp. 1135-1140.

Jayalakshmi, S and Kailas, SV and Seshan, S and Kim, KB and Fleury, E (2006) Tensile strength and fracture toughness of two magnesium metal matrix composites. In: Journal of Ceramic Processing Research, 7 (3). pp. 261-265.

Jayalakshmi, S and Kailas, Satish V and Seshan, S and Fleury, E (2000) Properties of squeeze cast Mg-6Zn-3Cu alloy and its saffil alumina short fibre reinforced composites. In: Journal Of Materials Science, 41 (12). pp. 3743-3752.

Jayalakshmi, S and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, S (2004) Influence of processing and reinforcement on microstructure and impact behavior of magnesium alloy AM100. In: Sadhana, 29 (5). pp. 509-523.

Jayamathy, M and Kailas, SV and Kumar, K and Seshan, S and Srivatsan, TS (2005) The compressive deformation and impact response of a magnesium alloy: influence of reinforcement. In: Materials Science & Engineering, A, 393 (1-2). pp. 27-35.

Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2005) Influence of Reinforcement and Processing on the Wear Response of Two Magnesium Alloys. In: Materials and Manufacturing Processes, 20 (2). pp. 255-271.

Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2004) Influence of reinforcement on microstructure and mechanical response of a magnesium alloy. In: Current Science, 87 (9). pp. 1218-1231.

Jayaram, V and Bhowmick, S and Xie, ZH and Math, S and Hoffman, M and Biswas, SK (2006) Contact deformation of TiN coatings on metallic substrates. In: Materials Science and Engineering: A, 423 (1-2). 08-13.

Jayaram, V and Biswas, SK (1999) Wear of $Al_2O_3-SiC-(Al,Si)$ melt oxidised ceramic composites. In: Wear, 225-22 (2). pp. 1322-1326.

Jayaram, V and Biswas, SK (1999) Wear of Al2O3-SiC-(Al,Si) melt oxidised ceramic composites. In: Wear, 225 (part 2). pp. 1322-1326.

Jayaram, Vikram and Manna, Rampada and Kshetrapal, Manjunath G and Sarkar, Jaydeep and Biswas, Sanjay K (1996) Microstructure control and wear of Al2O3-SiC-(Al,Si) composites made by melt oxidation. In: Journal of the American Ceramic Society, 79 (3). pp. 770-772.

Jayaraman, Balaji and Bhat, Navakanta and Pratap, Rudra (2009) Thermal characterization of microheaters from the dynamic response. In: Journal of Micromechanics and Microengineering, 19 (8).

Jayasingh, EM and Tantri, Srikari P and Bhaskaran, TA and Biswas, SK and Ramasesha, Sheela K (2002) Performance of monolithic and TiB2 reinforced MoSi2 in dry sliding contact with steel. In: Materials Letters, 53 (4-5). pp. 379-383.

Jebaraj, PM and Srinivasan, MN and Seshadri, MR (1989) General and Intergranular Corrosion of Austenitic Stainless Steel Castings. In: Corrosion, 45 (11). pp. 938-942.

Jeevanashankara, * and Madhusudana, CV and Kulkarni, MB (1990) Thermal Contact Conductances of Metallic Contacts at Low Loads. In: Applied Energy, 35 (2). pp. 151-164.

Jha, Anupam Nath and Ananthasuresh, GK and Vishveshwara, Saraswathi (2007) Protein sequence design based on the topology of the native state structure. In: Journal of Theoretical Biology, 248 (1). pp. 81-90.

Jha, K and Gurumoorthy, B (2000) Automatic propagation of feature modification across domains. In: Computer Aided Design, 32 (12). pp. 691-706.

Jha, Kailash and Gurumoorthy, B (2000) Multiple feature interpretation across domains. In: Computers in Industry, 42 (01). pp. 13-32.

Jha, Kaushal and Umashankar, C and Kutty, TRG and Bhasin, Vivek and Mahule, KN and Kailas, Satish V and Deb, Anindya (2008) Effect of pore size and distribution on energy absorption of aluminum foams under compressive load. In: EUFOAM-2008, ESTEC, Netherlands, 8-10 July, 2008, 8-10 July, 2008, Netherlands.

Jha, Kaushal and Umashankar, C and Kutty, TRG and Bhasin, Vivek and Mahule, KN and Kailas, Satish V and Deb, Anindya (2008) Energy absorbing behaviour of aluminium base foams. In: IC-ICAME, July 2-5, Bangalore, July 2-5, Bangalore.

Jha, M and Narasimhan, R (1992) A finite element analysis of dynamic fracture initiation by ductile failure mechanisms in a 4340 steel. In: International Journal of Fracture, 56 (3). pp. 209-231.

Jiang, Fei and Keating, Adrian and Martyniuk, Mariusz and Pratap, Rudra and Faraone, L and Dell, JM (2013) Process control of cantilever deflection for sensor application based on optical waveguides. In: Journal of Microelectromechanical Systems, 22 (3). pp. 569-579.

Jog, C S (2009) A dual algorithm for the topology optimization of non-linear elastic structures. In: International Journal For Numerical Methods In Engineering, 77 (4). pp. 502-517.

Jog, CS and Bayadi, Ramaprakash (2009) Stress and strain-driven algorithmic formulations for finite strain viscoplasticity for hybrid and standard finite elements. In: International Journal For Numerical Methods In Engineering, 79 (7). pp. 773-816.

Jog, CS and Kumar, Rakesh (2010) Shortcomings of discontinuous-pressure finite element methods on a class of transient problems. In: International Journal for Numerical Methods in Fluids, 62 (3). pp. 313-326.

Jog, CS and Motamarri, Phani (2009) Energy-momentum conserving algorithm for nonlinear transient analysis within the framework of hybrid elements. In: Journal of Mechanics of Materials and Structures, 4 (1). pp. 157-186.

Jog, CS (2005) A 27-node hybrid brick and a 21-node hybrid wedge element for structural analysis. In: Finite Elements in Analysis and Design, 41 (11-12). pp. 1209-1232.

Jog, CS (2004) The Accurate Inversion of Vandermonde Matrices. In: Computers & Mathematics with Applications, 47 (6-7). pp. 921-929.

Jog, CS (2006) A Concise Proof of the Representation Theorem for Fourth-Order Isotropic Tensors. In: Journal of Elasticity, 85 (2). pp. 119-124.

Jog, CS (2006) Derivatives of the Stretch, Rotation and Exponential Tensors in n-Dimensional Vector Spaces. In: Journal Of Elasticity, 82 (2). pp. 175-192.

Jog, CS (2011) The Equations of Equilibrium in Orthogonal Curvilinear Reference Coordinates. In: Journal of Elasticity, 104 (1-2, S). pp. 385-395.

Jog, CS (2008) The Explicit Determination of the Logarithm of a Tensor and Its Derivatives. In: Journal of Elasticity, 93 (2). pp. 141-148.

Jog, CS (2004) Higher-order shell elements based on a Cosserat model, and their use in the topology design of structures. In: Computer Methods in Applied Mechanics and Engineering, 193 (23-26). pp. 2191-2220.

Jog, CS (2010) Improved hybrid elements for structural analysis. In: Journal of Mechanics of Materials and Structures, 5 (3). pp. 507-528.

Jog, CS (2002) On the explicit determination of the polar decomposition in n-dimensional vector spaces. In: Journal of Elasticity, 66 (2). 159-169 .

Jog, CS (2013) An Outward-Wave-Favouring Finite Element-Based Strategy for Exterior Acoustical Problems. In: INTERNATIONAL JOURNAL OF ACOUSTICS AND VIBRATION, 18 (1). pp. 27-38.

Jog, CS (2002) Topology design of stpuctures subjected to periodic loading. In: Journal of Sound and vibration, 253 (3). pp. 687-709.

Jog, CS (2002) Topology design of structures using a dual algorithm and a constraint on the perimeter. In: International Journal for Numerical Methods in Engineering, 54 (7). pp. 1007-1019.

Jog, CS (2006) Topology design of three-dimensional structures using hybrid finite elements. In: IUTAM Symposium on Topological Design Optimization of Structures, Machines and Materials, Oct, 2005, Copenhagen, Denmark, pp. 33-42.

Jog, CS (2011) A finite element method for compressible viscous fluid flows. In: International Journal for Numerical Methods in Fluids, 66 (7). pp. 852-874.

Jog, CS (2008) A hybrid element formulation for the three-dimensional penalty finite element analysis of incompressible fluids. In: International Journal for Numerical Methods in Engineering, 73 (1). pp. 123-145.

Jog, CS (2001) A robust dual algorithm for topology design of structures in discrete variables. In: International Journal for Numerical Methods in Engineering, 50 (7). pp. 1607-1618.

Jog, CS and Annabattula, R (2005) The development of hybrid axisymmetric elements based on the Hellinger-Reissner variational principle. In: International Journal for Numerical Methods in Engineering .

Jog, CS and Cherukuri, HarishP (2014) A reexamination of some puzzling results in linearized elasticity. In: SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 39 (1). pp. 139-147.

Jog, CS and Kelkar, PP (2006) Non-linear analysis of structures using high performance hybrid elements. In: International Journal for Numerical Methods in Engineering, 68 (4). pp. 473-501.

Jog, CS and Mokashi, Imrankhan Sherkhan (2014) A finite element method for the Saint-Venant torsion and bending problems for prismatic beams. In: COMPUTERS & STRUCTURES, 135 . pp. 62-72.

Jog, CS and Nandy, Arup (2014) Mixed finite elements for electromagnetic analysis. In: COMPUTERS & MATHEMATICS WITH APPLICATIONS, 68 (8). pp. 887-902.

Jog, CS and Pal, RK (2011) A monolithic strategy for fluid-structure interaction problems. In: International Journal for Numerical Methods in Engineering, 85 (4). pp. 429-460.

Jog, CS and Patil, Kunal D (2013) Conditions for the onset of elastic and material instabilities in hyperelastic materials. In: Archives of Applied Mechanics, 83 (5). pp. 661-694.

Jog, CS and Sankarasubramanian, R and Abinandanan, TA (2000) Symmetry-breaking transitions in equilibrium shapes of coherent precipitates. In: Journal of the Mechanics and Physics of Solids, 48 (11). pp. 2363-2389.

Jose, M and Nagaraj, B and Seshan, S and Rohatgi, PK (1980) Extent of weight-reduction possible in automobiles. In: Journal of Scientific & Industrial Research (JSIR), 39 (8). pp. 434-440.

Joshi, Dhananjay and Mahadevan, Pradeep and Marathe, Amol and Chatterjee, Anindya (2007) Unimportance of geometric nonlinearity in analysis of flanged joints with metal-to-metal contact. In: International Journal Of Pressure Vessels And Piping, 84 (7). pp. 405-411.

Joshi, PR and Govardhan, RN (2006) Unsteady flow field downstream of a sudden expansion. In: Proceedings of the Eight National Conference on Air Breathing Engines and Aerospace Propulsion NCABE- 2006, December 12-14 2006, DIAT Pune.

Joshi, SG and Srinivasan, P (1978) Application of Laplace transform technique to the solution of certain third-order non-linear systems. In: Journal of Sound and Vibration, 57 (1). pp. 41-50.

Joshi, SG and Srinivasan, P (1977) Non-linear response of a gyrostabilized platform to transient input. In: Journal of Sound and Vibration, 54 (4). pp. 527-536.

Joshi, SG and Srinivasan, P (1978) The non-linear response of a gyrostabilized platform: Effects of correction torque time delay and of random inputs. In: Journal of Sound and Vibration, 57 (4). pp. 535-553.

Joshi, SG and Srinivasan, P (1978) The non-linear response of a gyrostabilized platform: Effects of correction torque time delay and of random inputs. In: Journal of Sound and Vibration, 57 (4). 535-553 .

Joshi, SG and Srinivasan, P (1978) The pulse response of non-linear third order systems. In: Journal of Sound and Vibration, 58 (1). pp. 109-115.

Joshi, SG and Srinivasan, P (1978) The pulse response of non-linear third order systems. In: Journal of Sound and Vibration, 58 (1). pp. 109-11.

Joshi, SG and Srirangarajan, HR and Srinivasan, P (1976) Stability of third-order systems. In: Journal of Sound and Vibration, 48 (4). pp. 578-581.

Joshi, Y and Dutta, P and Schupp, PE and Espinosa, D (1997) Nonaxisymmetric convection in stationary Gas Tungsten Arc Weld Pools. In: Journal of Heat Transfer, 119 (1). pp. 164-172.

Judge, J and Pratap, R (1998) Asymptotic states of a bilinear hysteretic oscillator in a fully dissipative phase space. In: Journal of Sound and Vibration, 218 (3). pp. 548-557.

K

Kailas, SV (2003) A Study of the Strain Rate Microstructural Response and Wear of Metals. In: Journal of Materials Engineering and Performance, 12 (6). pp. 629-637.

Kailas, SV and Biswas, SK (1997) Sliding wear of titanium. In: Transactions of the ASME: Journal of Tribology, 119 (1). pp. 31-35.

Kailas, SV and Biswas, SK (1999) Sliding wear of copper against alumina. In: Journal of Tribology, 121 (4). 795-801 .

Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Influence of initial texture on the microstructural instabilities during compression of commercial ?-Titanium at 25 °C to 400 °C. In: Metallurgical and Materials Transactions A, 25 (7). 1425 -1434 .

Kailas, SV and Prasad, YVRK and Biswas, SK (1993) Microstructural features of flow instability in α-titanium cylinders under high strain rate compression at 25°C to 400°C. In: Metallurgical Transactions. Physical Metallurgy and Material, 24 (11). pp. 2513-2520.

Kailas, Satish V (2008) Invited talk on Selection of Materials for Design, Momentum 2008. In: Momentum 2008,Thrissur.

Kailas, Satish V and Biswas, SK (1993) Material response to two-dimensional scratching by wedges. In: 9th International Conference on Wear of Materials, 13-16 April 1993, San Francisco, CA, USA, pp. 110-118.

Kailas, Satish V and Biswas, SK (1995) Strain rate response and its effect in plane strain abrasion of metals by a wedge. In: Wear, 184 (1). pp. 23-32.

Kailas, Satish V and Biswas, SK (1995) The role of strain rate response in plane strain abrasion of metals. In: Wear, 181 (part 2). pp. 648-657.

Kailas, Satish V and Kumar, K (2009) Friction Stir Welding. In: 2nd International Conference on Recent Advances in Material Processing technology, 2009, February, Kovilpatti.

Kailas, Satish V and Kumar, K (2008) Friction Stir Welding - A Solid State Welding Process. In: National conference on recent trends in mechanical engineering sciences, SSIT, Tumkur, Feb, SSIT, Tumkur.

Kailas, Satish V and Kumar, K (2008) Influence of tilt angle of plate on friction and transfer layer - a study of aluminium pin sliding against steel plate. In: International Conference on Materials for the Future (ICMF 2008), Thrissur, Jan., Thrissur.

Kailas, Satish V and Kumar, K (2007) Optimization of Friction Stir Welding Parameters study on Aluminium alloys. In: National Aerospace Manufacturers Seminar, NAMS-2007, , Dec 6-7, 2007, Thiruvananthapuram.

Kailas, Satish V and Mannekote, Jagadeesh Kumar (2007) Value addition in Coconut- Testing and Characterization of biodegradable lubricant from coconut oil. In: The second International Coconut Summit. , 9-11 May 2007, Kochi.

Kailas, Satish V and Sengupta, AK and Kutty, TRG and Prashanth, GBN (2007) Design and Development of High Temperature (1873K) Micro-indenters - Vickers, Knoop and Berkovich. In: Annual technical Meeting of IIM, , November 15-16, 2007, Mumbai.

Kalyanaraman, D and Bapu, G and Ramesh, NK and Subramanian, R (1989) Wear behavior of nickel-titanium dioxide composite coating. In: Bulletin of Electrochemistry, 5 (9). pp. 700-702.

Kamath, RV and Ravi, MR and Marathe, AG (1992) Mixed convection heat transfer from the bottom tip of a cylinder spinning about a vertical axis in a saturated porous medium. In: International Journal of Heat and Mass Transfer, 35 (4). pp. 823-832.

Kamesh, D and Pandiyan, R and Ghosal, Ashitava (2012) Passive vibration isolation of reaction wheel disturbances using a low frequency flexible space platform. In: Journal of Sound and Vibration, 331 (6). pp. 1310-1330.

Kamesh, D and Pandiyan, R and Ghosal, Ashitava (2010) Modelling, Design and Analysis of Low Frequency Platform for Attenuating Micro-Vibration in Spacecraft. In: Journal of Sound and Vibration, 329 (17). pp. 3431-3450.

Kanagalasara, Vathsala and Saxena, Deepak and Biswas, Sanjay K (2012) Effect of Interfacial Microstructure of Adsorbed Poly(ethylene glycol) Monooleate on Steel Substrate on Sliding Friction in Oil in Water Emulsion. In: Journal of Physical Chemistry C, 116 (39). pp. 20830-20838.

Kar, T and Munjal, ML (2005) Generalized analysis of a muffler with any number of interacting ducts. In: Journal of Sound And Vibration, 285 (3). pp. 585-596.

Kar, T and Munjal, ML (2006) Plane wave analysis of acoustic wedges using the boundary-condition-transfer algorithm. In: Applied Acoustics, 67 (9). pp. 901-917.

Kar, T and Munjal, ML (2005) An inherently stable boundary-condition-transfer algorithm for muffler analysis. In: Journal of the Acoustical Society of America, 118 (1). pp. 60-71.

Karagadde, Shyamprasad and Bhattacharya, Anirban and Tomar, Gaurav and Dutta, Pradip (2011) Modeling of growth and motion of equiaxed dendrites in a convecting melt. In: 2010 3rd International Conference on Thermal Issues in Emerging Technologies Theory and Applications (ThETA), 19-22 Dec. 2010, Cairo, Egypt.

Karagadde, Shyamprasad and Bhattacharya, Anirban and Tomar, Gaurav and Dutta, Pradip (2011) Study of dendrite growth in a rotational flow field. In: 21st National and 10th ISHMT-ASME Heat and Mass Transfer Conference, December 27-30, 2011, Indian Institute of Technology Madras, Chennai, India.

Karagadde, Shyamprasad and Bhattacharya, Anirban and Tomar, Gaurav and Dutta, Pradip (2012) A coupled VOF-IBM-enthalpy approach for modeling motion and growth of equiaxed dendrites in a solidifying melt. In: JOURNAL OF COMPUTATIONAL PHYSICS, 231 (10). pp. 3987-4000.

Karagadde, Shyamprasad and Sundarraj, Suresh and Dutta, Pradip (2009) Modeling growth of hydrogen bubbles in aluminum castings using the level-set method. In: Scripta Materialia, 61 (2). pp. 216-219.

Karagadde, Shyamprasad and Sundarraj, Suresh and Dutta, Pradip (2012) A model for growth and engulfment of gas microporosity during aluminum alloy solidification process. In: COMPUTATIONAL MATERIALS SCIENCE, 65 . pp. 383-394.

Karanam, Venkata Mangaraju and Chatterjee, Anindya (2011) Common underlying steering curves for motorcycles in steady turns. In: Vehicle System Dynamics, 49 (6). pp. 931-948.

Karanam, Venkata Mangaraju and Chatterjee, Anindya (2008) Some procedural details of analysis using ADAMS-Motorcycle. [Preprint] (Unpublished)

Karanam, Venkata Mangaraju and Chatterjee, Anindya and Ghosal, Ashitava (2011) Procedural aspects of modeling the dynamics of a three wheeled vehicle using ADAMS-CAR. [Preprint] (Unpublished)

Karki, KC and Arakeri, VH (1982) Analysis of EXCOBULLE two-phase expansion tests. In: Nuclear Engineering and Design, 72 (2). p. 271.

Kathuriya, ML and Munjal, ML (1979) Experimental evaluation of the aeroacoustic characteristics of a source of pulsating gas flow. In: Journal of the Acoustical Society of America, 65 (1). pp. 240-248.

Kathuriya, ML and Munjal, ML (1977) Measurement of the acoustical impedance of a black box at low frequencies using a shorter impedance tube. In: Journal of the Acoustical Society of America, 62 (3). pp. 751-754.

Kathuriya, ML and Munjal, ML (1977) Method for evaluation of the acoustical impedance of a black box, with or without mean flow, measuring pressures at fixed positions. In: Journal of the Acoustical Society of America, 62 (3). pp. 755-759.

Kathuriya, ML and Munjal, ML (1975) An accurate method for the experimental evaluation of the acoustical impedance of a black box. In: Journal of the Acoustical Society of America, 58 (2). pp. 451-454.

Kathuriya, ML and Munjal, ML (1976) A method for the experimental evaluation of the acoustic characteristics of an engine exhaust system in the presence of mean flow. In: Journal of the Acoustical Society of America, 60 (3). 745-751.

Kattakayam, TA and Srinivasan, K (1997) Electrical characterisation of domestic refrigeration compressors. In: IEE Proceedings of Science, Measurement and Technology, 144 (3). 123 -126.

Kattakayam, TA and Srinivasan, K (1999) Robust controller for an autonomous small refrigeration unit. In: IEE Proceedings - Science, Measurement and Technology, 146 (3). pp. 159-163.

Kattakayam, Thomachan A and Khan, Sumanta and Srinivasan, Kandadai (1996) Diurnal and environmental characterization of solar photovoltaic panels using a PC-AT add on plug in card. In: Solar Energy Materials and Solar Cells, 44 (1). pp. 25-36.

Kattakayam, Thomachan A and Srinivasan, K (1997) Experimental Investigation on a Series-Parallel Cluster of Photovoltaic Panels. In: Solar Energy, 61 (4). pp. 231-240.

Kattakayam, Thomachan A and Srinivasan, K (2004) Lead acid batteries in solar refrigeration systems. In: Renewable Energy, 29 (8). pp. 1243-1250.

Kattakayam, Thomachan A and Srinivasan, K (1996) Photovoltaic Panel-Generator Based Autonomous Power Source For Small Refrigeration Units. In: Solar Energy, 56 (6). pp. 543-552.

Kattakayam, Thomachan A and Srinivasan, K (2000) Thermal performance characterization of a photovoltaic driven domestic refrigerator. In: International Journal of Refrigeration, 23 (3). pp. 190-196.

Kattakayam, Thomachan A and Srinivasan, K (1998) Uninterrupted power supply for autonomous small refrigerators. In: Energy Conversion and Management, 39 (1-2). pp. 21-26.

Kaur, Malhi Charanjeet and Pratap, Rudra and Bhat, Navakanta (2009) Design of a high sensitivity FET integrated MEMS microphone. In: 23rd Eurosensors Conference, SEP 06-09, 2009, Lausanne, pp. 875-878.

Kaushik, V and Narasimhan, R and Mishra, RK (2014) Experimental study of fracture behavior of magnesium single crystals. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 590 . pp. 174-185.

Kazemi, Amir AD and Murthy, Srinivas M and Raju, Govinda N (1989) Stress intensity factor determination of radially cracked circular rings subjected to tension using photoelastic technique. In: Engineering Fracture Mechanics, 32 (3). 403 -408.

Keshavan, SY and Srinath, LS (1978) An approximate mathematical procedure for the determination of characteristic parameters for a general case in three dimensional photoelasticity. In: Mechanics Research Communications, 5 (1). pp. 1-7.

Khan, RH and Mahadeva, NS and Seshadri, MR (1973) Some Studies On Flowability Of Molding Sand. In: Journal of the Indian Institute of Science, 54 (4). pp. 194-210.

Khan, S and Bhat, Thejas N and Ananthasuresh, GK (2009) Design and Characterization of a Micromachined Accelerometer with a Mechanical Amplifier for Intrusion Detection. In: Proc. of the 3rd National ISSS Conference on MEMS, Smart Structures and Materials, Oct. 14-16, 2009, Kolkatta.

Khan, Sambuddha and Ananthasuresh, GK (2014) Improving the Sensitivity and Bandwidth of In-Plane Capacitive Microaccelerometers Using Compliant Mechanical Amplifiers. In: JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 23 (4). pp. 871-887.

Khan, Sambuddha and Ananthasuresh, GK (2014) A MICROMACHINED WIDE-BAND IN-PLANE SINGLE-AXIS CAPACITIVE ACCELEROMETER WITH A DISPLACEMENT-AMPLIFYING COMPLIANT MECHANISM. In: MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 42 (3). pp. 355-370.

Khan, Sambuddha and Prasanna, Deepa and Ananthasuresh, GK (2012) Compact in-plane dual-axis spring-steel accelerometer. In: 5th ISSS National Conference on MEMS, Smart Materials, Structures and Systems, September 21-22, 2012, Coimbatore, India.

Khan, Sumanta and Srinivasan, K (1996) Inter-related p–T and $\rho-T$ equations for saturated fluid phases:application to R-134a. In: Journal of Physics D: Applied Physics, 29 (12). pp. 3079-3088.

Khandelwal, Pranav C and Agrawal, Suchi S and Namboothiry, Manoj AG and Gundiah, Namrata (2014) Fabrication of a novel biomaterial with enhanced mechanical and conducting properties. In: JOURNAL OF MATERIALS CHEMISTRY B, 2 (42). pp. 7327-7333.

Khanna, SK and Srinivasan, K (1996) Saturated liquid viscosity correlations for alternative refrigerants. In: International Journal of Thermophysics, 17 (2). 361-372 .

Khatri, OP and Devaprakasam, D and Biswas, SK (2005) Frictional Responses of Octadecyltrichlorosilane (OTS) and 1H, 1H, 2H, 2H-Perfluorooctyltrichlorosilane (FOTS) Monolayers Self-assembled on Aluminium over Six Orders of Contact Length Scale. In: Tribology Letters, 20 (3&4). pp. 235-246.

Khatri, OP and Biswas, SK (2006) Boundary lubrication capabilities of alkylsilane monolayer self-assembled on aluminium as investigated using FTIR spectroscopy and nanotribometry. In: Surface Science, 600 (18). pp. 4399-4404.

Khatri, Om P and Biswas, Sanjay K (2007) Friction of Octadecyltrichlorosilane Monolayer Self-Assembled on Silicon Wafer in 0% Relative Humidity. In: Journal of Physical Chemistry C, 111 (6). pp. 2696-2701.

Khatri, Om P and Biswas, Sanjay K (2008) Load Induced Microstructure Evolution and Friction in an Organic Monolayer Self-assembled on a Silicon Substrate. In: Tribology Letters, 32 (3). pp. 179-188.

Khatri, Om P and Math, Souvik and Bain, Colin D and Biswas, Sanjay K (2007) Frictional Response of a Silane Monolayer to Sliding in a Humid Environment. In: Journal of Physical Chemistry C, 111 (44). pp. 16339-16344.

Khatri, Prakash Om and Biswas, SK (2004) Thermal stability of octadecyltrichlorosilane self-assembled on a polycrystalline aluminium surface. In: Surface Science, 572 (2-3). pp. 228-238.

Koh, SK and Ananthasuresh, GK and Croke, C (2005) A Quadratic Programming Formulation for the Design of Reduced Protein Models in Continuous Sequence Space. In: Journal of Mechanical Design, 127 (4). pp. 728-735.

Koh, Sung K and Ananthasuresh, GK and Vishveshwara , S (2005) A Deterministic Optimization Approach to Protein Sequence Design Using Continuous Models. In: The International Journal of Robotics , 24 (2-3). pp. 109-130.

Koh, Sung K and Chirikjian, Gregory S and Ananthasuresh, GK (2009) A Jacobian-Based Algorithm for Planning Attitude Maneuvers Using Forward and Reverse Rotations. In: Journal of Computational and Nonlinear Dynamics, 4 (1). 011012-1.

Kohli, S and Srinivasan, J and Mukunda, HS (1993) Heat transfer to a horizontal disc using a buoyancy-induced jet. In: International Journal of Heat and Mass Transfer, 36 (16). pp. 4049-4066.

Kollimada, S and Agrawal, V and Gundiah, N (2012) Adhesion and migration response of breast cancer cells to varying substrate stiffness. In: International Conference on Angiogenesis : Basics and Applications, 1-3 March , 2012, Chennai, Tamilnadu, India.

Korpela, Seppo A (2006) Oil depletion in the world. In: Current Science, 91 (9). pp. 1148-1152.

Krishna, Hara and Pratap, Rudra (2009) Elasticity Effects of the Biomolecule in the Mass Detection Using Resonance of a MEMS Cantilever. In: International Conference on MEMS (ICMEMS 2009), January 3-5, 2009, IIT Madras.

Krishna, Y and Shrinivasa, U (2009) Semi-active vibration isolation using a near-zero-spring-rate device:steady state analysis of a single-degree-of-freedom model. In: Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 223 (D11). pp. 1395-1403.

Krishnamurthy, MV and Chandra, Rajneesh and Jacob, S and Kasthurirengan, S and Karunanithi, R (1996) Experimental studies on cool-down and mass flow characteristics of a demountable liquid nitrogen transfer line. In: Cryogenics, 36 (6). pp. 435-441.

Krishnan, BP and Raman, N and Narayanaswamy, K and Rohatgi, PK (1981) Mechanism of improvement in oil spreadability of aluminium alloy-graphite particle composites. In: Tribology International, 14 (5). pp. 301-305.

Krishnan, BP and Raman, N and Narayanaswamy, K and Rohatgi, PK (1980) Performance of an Al-Si-graphite particle composite piston in a diesel engine. In: Wear, 60 (1). pp. 205-215.

Krishnan, G and Ananthasuresh, GK (2006) An Objective Evaluation of Displacement-Amplifying Compliant Mechanisms for Sensor Applications. In: CD-ROM Proceedings of the ASME International Design Engineering and Technical Conferences, September 10–13 2006, Philadelphia, USA.

Krishnan, Girish and Ananthasuresh, GK (2008) Evaluation and Design of Displacement-Amplifying Compliant Mechanisms for Sensor Applications. In: Journal Of Mechanical Design, 130 (10). 2304-1-9.

Krishnan, R and Das, A and Gurumoorthy, B (1996) Octree Encoding of B-rep Based Objects. In: Computers & Graphics, 20 (1). pp. 107-114.

Krishnaprakas, CK and Narayana, KB and Dutta, P (1999) Combined convective and radiative heat transfer in turbulent tube flow. In: Journal Of Thermophysics And Heat Transfer, 13 (3). pp. 390-394.

Krishnaprakas, CK and Narayana, Badari K and Dutta, Pradip (2000) Heat transfer correlations for multilayer insulation systems. In: Cryogenics, 40 (07). pp. 431-435.

Krishnaprakas, CK and Narayana, Badari K and Dutta, Pradip (1999) Interaction of radiation with natural convection. In: Journal of Thermophysics, 13 (3). pp. 387-390.

Krishnaprakas, CK and Narayana, KB and Dutta, P (2000) Radiation in boundary layer flow of an absorbing, emitting and anisotropically scattering fluid. In: International Journal of Numerical Methods For Heat & Fluid, 10 (5-6). pp. 530-540.

Krishnaprakas, K and Narayana, Badari K and Dutta, Pradip (2001) Combined Conduction And Radiation Heat Transfer In A Gray Anisotropically Scattering Planar Medium With Diffuse-pecular Boundaries. In: International Communications in Heat and Mass Transfer, 28 (1). pp. 77-86.

Kulkarni, Salil S and Pratap, Rudra (2000) Studies on the dynamics of a supercavitating projectile. In: Applied Mathematical Modelling, 24 (2). pp. 113-129.

Kulkarni, Sandip D and Chakravarthy, Shanthanu and Minor, Mark A and Pardyjak, Eric R and Hollerbach, John M (2012) Control of a Duct Flow Network for Wind Display in a Virtual Environment. In: IEEE-ASME TRANSACTIONS ON MECHATRONICS, 17 (6). pp. 1021-1030.

Kumar, Arvind and Dutta, Pradip and Sundarraj, Suresh and Walker, Mike J (2007) Remelting of Solid and its Effect on Macrosegregation During Solidification. In: Numerical Heat Transfer, Part A: Applications, 51 (1). pp. 59-83.

Kumar, K and Kailas, Satish V and Srivatsan, TS (2008) Influence of tool geometry in friction stir welding. In: Materials and Manufacturing Processes, 23 (2). pp. 188-194.

Kumar, K and Kalyan, C and Kailas, Satish V and Srivatsan, TS (2009) An Investigation of Friction During Friction Stir Welding of Metallic Materials. In: Materials And Manufacturing Processes, 24 (4). pp. 438-445.

Kumar, P and Lakshmi, H and Dutta, P (2008) Solidification of A356 Alloy in a Linear Electromagnetic Stirrer. In: 10th International Conference on Semi-Solid Processing of Alloys and Composites, September 16th -18th, 2008., Aachen and Germany, pp. 563-568.

Kumar, A and Dutta, P (2008) Numerical Analysis of Columnar-to-Equiaxed Transition in Directionally Solidified Sn-Pb and Al-Cu Alloys. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Kumar, A and Dutta, P (2008) Transport of Solid Crystals during Solidification of Ternary Alloys. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Kumar, A and Dutta, P (2006) Transport of Solid Crystals during Solidification of a Binary Alloy. In: International Conference on Advances in Materials and Materials Processing, Feb 4-5 2006, IIT Kharagpur.

Kumar, A and Dutta, Pradip (2006) Effect of Electromagnetic Stirring on Macrosegregation during Solidification of a Binary Alloy. In: 13th International heat Transfer Conference, August 13-18 2006, Sydney, Australia.

Kumar, Arvind and Dutta, Pradip (2005) Modeling of transport phenomena in continuous casting of non-dendritic billets. In: International Journal of Heat and Mass Transfer, 48 (17). pp. 3674-3688.

Kumar, Arvind and Dutta, Pradip (2006) Modelling of Heat, Mass, Energy and Solute Transport during Solidification of Ternary Alloys. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.

Kumar, Arvind and Dutta, Pradip (2009) Numerical studies on columnar-to-equiaxed transition in directional solidification of binary alloys. In: Journal Of Materials Science, 44 (15). pp. 3952-3961.

Kumar, Arvind and Dutta, Pradip (2008) A Rayleigh number based dendrite fragmentation criterion for detachment of solid crystals during solidification. In: Journal of Physics D-Applied Physics, 41 (15). p. 155501.

Kumar, Arvind and Walker, Mike J and Sundarraj, Suresh and Dutta, Pradip (2011) Grain Floatation During Equiaxed Solidification of an Al-Cu Alloy in a Side-Cooled Cavity: Part I-Experimental Studies. In: Metallurgical and Materials Transactions B, 42 (4). pp. 825-836.

Kumar, Arvind and Walker, Mike J and Sundarraj, Suresh and Dutta, Pradip (2011) Grain Floatation During Equiaxed Solidification of an Al-Cu Alloy in a Side-Cooled Cavity: Part II-Numerical Studies. In: Metallurgical and Materials Transactions B, 42 (4). pp. 783-799.

Kumar, Deepak and Biswas, Sanjay K (2010) Contribution of different physical forces to the disjoining pressure of a thin water film being pressed by an oil droplet. In: Journal of Colloid and Interface Science, 348 (1). pp. 255-264.

Kumar, Deepak and Biswas, Sanjay K (2011) Effect of surfactant dispersed in oil on interaction force between an oil film and a steel substrate in water. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 377 (1-3). pp. 195-204.

Kumar, Deepak and Biswas, Sanjay K (2010) Replacement of water on a steel substrate by a surrounding oil reservoir. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 356 (1-3). pp. 112-119.

Kumar, Deepak and Biswas, Sanjay Kumar (2008) Microscopic Frictional Response of Sodium Oleate Self-Assembled on Steel. In: Tribology Letters, 30 (3). pp. 199-204.

Kumar, Deepak and Daniel, Jency and Biswas, SK (2010) Tribology of steel/steel interaction in oil-in-water emulsion: a rationale for lubricity (vol 345, pg 307, 2010). In: Journal of Colloid and Interface Science, 351 (2). p. 584.

Kumar, Deepak and Daniel, Jency and Biswasa, SK (2010) Tribology of steel/steel interaction in oil-in-water mulsion; a rationale for lubricity. In: Journal of Colloid and Interface Science, 345 (2). pp. 307-315.

Kumar, Dinesh and Gurav, Sampada and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) Synthesis and characterization of nickel/barium hexa-aluminate composite coatings. In: BULLETIN OF MATERIALS SCIENCE, 35 (6). pp. 977-988.

Kumar, K and Kailas, SV (2010) Positional dependence of material flow in friction stir welding: analysis of joint line remnant and its relevance to dissimilar metal welding. In: Science and Technology of Welding & Joining, 15 (4). pp. 305-311.

Kumar, K and Kailas, Satish V (2008) Friction in Friction Stir Welding. In: International Conference on Industrial Tribology, New Delhi, November, New Delhi.

Kumar, K and Kailas, Satish V (2008) Influence of welding parameters on the weld formation and modeling of FSW. In: Workshop on Friction Stir Welding and Surfacing of Materials, Golden Jubilee Celebrations of DRDO, DMRL, Hyderabad, March, Hyderabad.

Kumar, K and Kailas, Satish V (2008) On the role of axial load and the effect of interface position on the tensile strength of a friction stir welded aluminium alloy. In: Materials & Design, 29 (4). 791 -797.

Kumar, K and Kailas, Satish V (2007) Optimization of friction stir welding parameters for AA6061-T6. In: Annual technical Meeting of IIM, , November 15-16, 2007, Mumbai.

Kumar, K and Kailas, Satish V (2008) Optimization of friction stir welding parameters for precipitation hardenable aluminum alloys 7020 and 6061. In: International Conference on Advances in Manufacturing Technology (ICAMT 2008) for Young Engineers, February 6-8, Chennai, February 6-8, Chennai.

Kumar, K and Kailas, Satish V (2007) Optimization of friction-stir welding parameters for a precipitation hardenable aluminum alloy. In: Invited talk presented at the International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.

Kumar, K and Kailas, Satish V (2007) Production of bulk-nano materials by friction-stir processing. In: Invited talk presented at the International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.

Kumar, K and Kailas, Satish V (2008) An experimental analysis on a friction stir welding defect (joint-line-remnant). In: Presented at the Symposium on Joining of Materials (SOJOM), Tiruchirappalli, December, Tiruchirappalli.

Kumar, K and Kailas, Satish V (2006) An investigation on friction in stir welding. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Kumar, K and Kailas, Satish V (2006) An investigation on the mechanism of friction-stir weld formation and tool design. In: International Conference on Trends in Product Lifecycle, Modeling, Simulation and Synthesis, Dec 18-20 2006, IISc, Bangalore.

Kumar, K and Kailas, Satish V (2008) The role of friction stir welding tool on material flow and weld formation. In: Materials Science and Engineering: A, 485 (1-2). pp. 367-374.

Kumar, K and Kailas, Satish V and Srivatsan, TS (2011) The Role of Tool Design in Influencing the Mechanism for the Formation of Friction Stir Welds in Aluminum Alloy 7020. In: Materials and Manufacturing Processes, 26 (7). pp. 915-921.

Kumar, KG and Pavithran, C and Rohatgi, PK (1981) Recovery of Tartrate from Electroless Copper Baths. In: Plating and Surface Finishing, 68 (7). pp. 70-71.

Kumar, Krishna R and Narasimhan, R and Prabhakar, O (1992) Dynamic growth of tensile cracks by ductile and brittle fracture mechanisms in a viscoplastic material. In: Acta Metallurgica et Materialia, 40 (7). pp. 1563-1572.

Kumar, P and Chakraborty, S and Srinivasan, K and Dutta, P (2002) Rayleigh-Benard convection during solidification of an eutectic solution cooled from the top. In: Metallurgical and Materials Transactions B, 33 (4). pp. 605-612.

Kumar, P and Chakraborty, S and Srinivasan, K and Dutta, P (2003) Studies on Transport Phenomena during Directional Solidification of a Noneutectic Binary Solution Cooled from the Top. In: Metallurgical and Materials Transactions B, 34 (6). pp. 899-909.

Kumar, P and Lakshmi, H and Dutta, P (2009) Determination of solid fraction evolution during solidification of aluminum alloy in presence of linear electromagnetic stirring. In: International Mechanical Engineering Congress & Exposition, November 13-19, 2009, Lake Buena Vista, Florida, USA.

Kumar, P and Lakshmi, H and Dutta, P (2008) Rheocasting of A356 Alloy using Linear electromagnetic Stirring. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Kumar, P and Lakshmi, H and Dutta, P (2007) Rheocasting of aluminium A356 alloy in a linear electromagnetic stirrer. In: The 6th Pacific Rim International Conference on Advanced Materials and Processing, , Nov. 5-9, 2007, Jeju Island, Korea.

Kumar, Pradeep C and Kailas, Satish V and Menezes, Pradeep L (2006) Role of Surface Texture on Friction and Wear Under Boundary Lubricated Conditions. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2006) Visualization of convection loops due to Rayleigh-Benard convection during solidification. In: Mechanics Research Communications, 33 (5). pp. 593-600.

Kumar, Rajesh and Ravikrishna, RV (2012) Modeling and optimization of a natural convection-based agricultural dryer. In: Journal of Scientific and Industrial Research, 71 (5). pp. 316-323.

Kumar, Ramesh MV and Narasimhan, R (2004) Analysis of spherical indentation of linear viscoelastic materials. In: Current Science, 87 (8). pp. 1088-1095.

Kumar, Ranganathan and Tijerino, Erick and Saha, Abhishek and Basu, Saptarshi (2010) Structural morphology of acoustically levitated and heated nanosilica droplet. In: Applied Physics Letters, 97 (12).

Kumar, Shishir and Pratap, Rudra (2006) Partitioning design space for linear tuning of natural frequencies in planar dynamic MEMS structures. In: Sensors and Actuators, A: Physical, 125 (2). pp. 304-312.

Kumar, Shishir and Venkatesh, KP and Baskar, S Sam and Madhavi, SP (2009) System integration design in MEMS - A case study of micromachined load cell. In: Sadhana, 34 (4). pp. 663-675.

Kumar, Suresh K and Phanikumar, G and Dutta, P and Chattopadhyay, K (2002) Microstructural development of dissimilar weldments: case of MIG welding of Cu with Fe filler. In: Journal of Materials Science, 37 (11). pp. 2345-2349.

Kumar, Udaya K and Gundappa, Pradeep and Bai, Pramila BN and Natarajan, KA and Biswas, SK (1989) Laboratory studies on the wear of grinding media. In: Tribology International, 22 (3). pp. 219-225.

Kumar , K and Srivatsan, TS and Kailas, Satish V (2007) An insight into understanding the intrinsic mechanisms governing the formation of friction stir welds in joining of metals. In: The International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.

Kund, NK and Dutta, P (2010) Numerical simulation of solidification of liquid aluminum alloy flowing on cooling slope. In: Transactions of Nonferrous Metals Society of China, 20 (Suppl.). S898-S905.

Kund, NK and Dutta, P (2012) Scaling Analysis of Solidification of Liquid Aluminum Alloy Flowing on Cooling Slope. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 65 (6, SI). pp. 587-594.

Kundanati, L and Gundiah, N (2013) Biomechanics of Substrate Boring by Fig Wasps: Role of Zinc in Insect Cuticle. In: INTEGRATIVE AND COMPARATIVE BIOLOGY, 53 (1). E118.

Kundanati, Lakshminath and Gundiah, Namrata (2014) Biomechanics of substrate boring by fig wasps. In: JOURNAL OF EXPERIMENTAL BIOLOGY, 217 (11). pp. 1946-1954.

Kunte, MV and Sarkar, Abhijit and Sonti, Venkata R (2012) Asymptotic expansions for the coupled wavenumbers in an infinite orthotropic flexible fluid-filled cylindrical shell. In: Journal of the Acoustical Society of America, 131 (6). pp. 4272-4282.

Kunte, MV and Sarkar, Abhijit and Sonti, Venkata R (2010) Generalized asymptotic expansions for coupled wavenumbers in fluid-filled cylindrical shells. In: Journal of Sound and Vibration, 329 (25). pp. 5356-5374.

Kunte, MV and Sarkar, Abhijit and Sonti, Venkata R (2011) Generalized asymptotic expansions for the wavenumbers in infinite flexible in vacuo orthotropic cylindrical shells. In: Journal of Sound and Vibration, 330 (23). pp. 5628-5643.

Kunte, MV and Sonti, Venkata R (2013) Asymptotic wavenumber expansions of a strongly orthotropic fluid-filled circular cylindrical shell. In: Wave Motion, 50 (3). pp. 402-414.

Kunte, MV and Sonti, Venkata R (2011) Coupled Wavenumbers in an Infinite Flexible Fluid-Filled Circular Cylindrical Shell: Comparison between Different Shell Theories. In: Computer Modeling in Engineering and Sciences (CMES), 81 (2). pp. 119-156.

Kuppu Rao, V (1980) A note on mass transfer in turbulent wall jets. In: International Journal of Heat and Mass Transfer, 23 (12). pp. 1690-1693.

L

Lakshmi, H and Kumar, Vinay MC and Raghunath, * and Kumar, P and Ramanarayanan, V and Murthy, KSS and Dutta, P (2010) Induction reheating of A356.2 aluminum alloy and thixocasting as automobile component. In: Transactions of Nonferrous Metals Society of China, 20 (Suppl.). S961-S967.

Lakshminarayana, HV and Murthy, MVV and Srinath, LS (1981) On a finite element model for the analysis of through cracks in laminated anisotropic cylindrical shells. In: Engineering Fracture Mechanics, 14 (4). pp. 697-712.

Lakshminarayana, HV and Murthy, MVV and Srinath, LS (1982) On an analytical-numerical procedure for the analysis of cylindrical shells with arbitrarily oriented cracks. In: International Journal of Fracture, 19 (4). pp. 257-275.

Lakshminarayana, HV and Murthy, MVV and Srinath, LS (1982) On an analytical-numerical procedure for the analysis of cylindrical-shells with arbitrarily oriented cracks. In: International Journal of Fracture, 19 (4). pp. 257-275.

Lakshmip, DV and Hariharan, R and Tirunarayanan, MA (1973) Pressure Transducer For Low-Temperature Applications. In: Indian Journal Of Technology, 11 (5). pp. 233-236.

Lankalapalli, Shrinivas and Ghosal, Ashitava (1997) Chaos in Robot Control Equations. In: International Journal of Bifurcation and Chaos, 7 (3). pp. 707-720.

Lankalapalli, Shrinivas and Ghosalt, Ashitava (1996) Possible Chaotic Motions in a Feedback Controlled 2R Robot. In: IEEE International Conference on Robotics and Automation, 22-28 April 1996, Minneapolis, MN, USA, Vol.2, 1241-1246.

Lee, Joshua and Basu, Saptarshi and Kumar, Ranganathan (2013) COMPARISON AND CROSS-VALIDATION OF OPTICAL TECHNIQUES IN DIFFERENT SWIRL SPRAY REGIMES. In: ATOMIZATION AND SPRAYS, 23 (8). pp. 697-724.

Limaye, P and Ramu, G and Pamulapati, S and Ananthasuresh, GK (2009) A Compliant Mechanism Kit with Flexible Beams and Connectors. In: 14th National Conference on Machines and Mechanisms (NaCoMM-09), December 17-18, 2009, NIT-Durgapur, India.

Limaye, Padmanabh and Ramu, G and Pamulapati, Sindhuja and Ananthasuresh, GK (2012) A compliant mechanism kit with flexible beams and connectors along with analysis and optimal synthesis procedures. In: Mechanism and Machine Theory, 49 . pp. 21-39.

Lockwood, AJ and Anantheshwara, K and Bobji, MS and Inkson, BJ (2011) Friction-formed liquid droplets. In: Nanotechnology, 22 (10).

Lockwood, AJ and Wedekind, J and Gay, RS and Bobji, MS and Amavasai, B and Howarth, M and Moebus, G and Inkson, BJ (2010) Advanced transmission electron microscope triboprobe with automated closed-loop nanopositioning. In: Measurement Science and Technology, 21 (7).

Lockwood, AJ and Wedekind, J and Gay, RS and Wang, JJ and Bobji, MS and Amavasai, B and Howarth, M and Möbus, G and Inkson, BJ (2011) NanoLAB Triboprobe: Characterizing Dynamic Wear, Friction and Fatigue at the Nanoscale. In: MRS Proceedings, 1297 . 03-61.

Lohar, KA and Venkatesh, KP and Pratap, R (2008) Effect of Process Induced Variations on the Performance Characteristics of Dual Mass Vibratory MEMS Gyroscope. In: International Conference on Smart materials, Structures and Systems, Indian Institute of Science, Bangalore, IISc Bangalore.

Luthra, Abhinav and Jha, Anupam Nath and Ananthasuresh, GK and Vishveswara, Saraswathi (2007) A method for computing the inter-residue interaction potentials for reduced amino acid alphabet. In: Journal of Biosciences, 32 (5). pp. 883-889.

M

Madahevan, P and Jog, CS and Chatterjee, A (2007) Critical Speed of Arbitrary Shaped Axisymmetric Rotors Books. In: Conference on Advances in Space Science and Technology (CASST'2007), 2007, IISc, Bangalore.

Madanmohan, A and Ravikrishna, RV (2007) Multi-dimensional Combustion Simulations in a Single-Cylinder Biogas-fuelled Spark Ignition Engine with Detailed chemistry. In: 6th Asia-Pacific Conference on Combustion, , 2007, Nagoya, Japan.

Madhusudhan, K and Narasimhan, MV and Ravikrishna, RV (2006) A new cyclone separator-based pre-filter design for internal combustion engine applications. Part 2: parametric study and optimization. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220 (12). pp. 1755-1764.

Madhusudhana, KS and Narasimhan, R (2002) Experimental and numerical investigations of mixed mode crack growth resistance of a ductile adhesive joint. In: Engineering Fracture Mechanics, 69 (7). pp. 865-883.

Mahadevan, Pradeep and Chatterjee, Anindya (2009) Axially Loaded Timoshenko Rotors From A Prestressed Continuum Approach. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa,Israel, pp. 569-576.

Mahato, Anirban and Perry, Thomas A and Jayaram, Vikram and Biswas, SK (2010) Pressure and thermally induced stages of wear in dry sliding of a steel ball against an aluminium-silicon alloy flat. In: Wear, 268 (9-10). pp. 1080-1090.

Mahato, Anirban and Sachdev, Anil and Biswas, SK (2010) Lubricated Tribology of a Eutectic Aluminium-Silicon Alloy in the Ultra-Mild Wear and Mild Wear Regimes for Long Sliding Times. In: ACS Applied materials & interfaces , 2 (10). pp. 2870-2879.

Mahato, Anirban and Sachdev, Anil K and Biswas, SK (2008) Effect of particle morphology on resistance to permanent sinking by normal loading of silicon particle in aluminium matrix of a cast aluminium silicon alloy. In: Wear, 365 (5-6). pp. 849-855.

Mahato, Anirban and Verma, Nisha and Jayaram, Vikram and Biswas, SK (2011) Severe wear of a near eutectic aluminium-silicon alloy. In: Acta Materialia, 59 (15). pp. 6069-6082.

Mahato, Anirban and Xia, Shuman and Perry, Tom and Sachdev, Anil and Biswas, SK (2010) Role of silicon in resisting subsurface plastic deformation in tribology of aluminium-silicon alloys. In: Tribology International, 43 (1-2). pp. 381-387.

Maheswari, N and Reddy, AN and Sahu, DK and Ananthasuresh, GK (2009) Miniature Compliant Grippers with Force-Sensing. In: 14th National Conference on Machines and Mechanisms (NaCoMM-09), December 17-18, 2009, NIT-Durgapur, India.

Mallik, Awadesh K and Binu, SR and Satapathy, LN and Narayana, Chandrabhas and Seikh, Md Motin and Shivashankar, SA and Biswas, SK (2010) Effect of substrate roughness on growth of diamond by hot filament CVD. In: Bulletin of Materials Science, 33 (3). pp. 251-255.

Mallik, Awadesh K and Shivashankar, SA and Biswas, SK (2009) High vacuum tribology of polycrystalline diamond coatings. In: Sadhana, 34 (5). pp. 811-821.

Mangaraju, Venkata and Sonti, Venkata R (2004) Wave attenuation in periodic three-layered beams: analytical and FEM study. In: Journal of Sound and Vibration, 276 (3-5). 541–570.

Manimunda, P and Filleter, T and Egberts, P and Jayaram, V and Biswas, SK and Bennewitz, R (2009) Nano-meter scale plasticity in KBr studied by nanoindenter and force microscopy. In: Symposium on Probing Mechanics at Nanoscale Dimensions held at the 2009 MRS Spring Meeting, APR 14-17, 2009, San Francisco, CA, pp. 81-86.

Manivannan, M and Srinivasan, M.N. (1997) An agent based architecture for collaborative design and analysis. In: Proceedings of 4th ISPE International Conference on Concurrent Engineering: Research and Applications, 20-22 Aug. 1997, Rochester, MI, USA, pp. 347-354.

Mankame, ND and Ananthasuresh, GK (2007) Synthesis of contact-aided compliant mechanisms for non-smooth path generation. In: International Journal for Numerical Methods in Engineering, 69 (12). pp. 2564-2605.

Mankame, Nilesh D and Ananthasuresh, GK (2007) A Compliant Transmission Mechanism With Intermittent Contacts for Cycle-Doubling. In: Journal of Mechanical Design, 129 (1). 114 -121.

Mannekote, Jagadeesh K and Kailas, Satish V (2009) Influence of unsaturation on boundary lubrication properties of few oxidized neat vegetable oils. In: TRIBO-INDIA Conference, on Tribology of Automotive Systems, December, 2009.

Mannekote, Jagadeesh K and Kailas, Satish V (2009) Performance evaluation of vegetable oils as lubricant in a four stroke engine. In: World Tribology conference 2009, Sep 12-15, 2009, kyoto, Japan.

Mannekote, Jagadeesh K and Kailas, Satish V (2009) Studies on boundary lubrication properties of oxidised coconut and soy bean oils. In: Lubrication Science, 21 (9). pp. 355-365.

Mannekote, Jagadeesh K and Kailas, Satish V and Naik, RT (2009) Condition monitoring of vegetable oils used in a 4 stroke engine as lubricants. In: TRIBO-INDIA Conference, on Tribology of Automotive Systems, December 2009.

Manoj Kumar, R and Ramaiah, KV and Saikrishna, CN and Ravi Kumar, A and Bhaumik, SK and Ananthasuresh, GK (2009) A Mechanism with SMA Tendon Actuator for an Aircraft Flap. In: Proc. of the 3rd National ISSS Conference on MEMS, Smart Structures and Materials , Oct. 14-16, 2009, Kolkatta.

Marathe, AG and Prabhakar, V and Jain, VK (1980) Studies on Hydrogen-Bromine Reaction Scheme. In: Combustion Science and Technology, 21 (3-4). 181 -182.

Marathe, Amol and Chatterjee, Anindya (2005) Wave attenuation in nonlinear periodic structures using harmonic balance and multiple scales. In: Journal of Sound and Vibration, 289 (4-5). pp. 871-888.

Marur, PR and Sinha, KRY and Nair, PS (1995) A Compact Testing System For Dynamic Fracture Studies. In: Journal Of Testing And Evaluation, 23 (4). pp. 267-274.

Marur, PR and Nair, PS and Simha, KRY (1996) Two Degrees of Freedom Modeling of Precracked Beams under Impact. In: Engineering Fracture Mechanics, 53 (3). pp. 481-491.

Marur, PR and Simha, KPR (1996) Dynamic initiation toughness measu~ment using double Grooved discs. In: International Journal of Fracture, 77 (03). R55-R59.

Math, S and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part II. Prediction of failure modes in a thin TiN film deposited on a compliant elastic substrate. In: Journal of Materials Research, 21 (3). pp. 783-790.

Math, Souvik and Horn, Roger and Jayaram, Vikram and Biswas, Sanjay K (2007) A general contact mechanical formulation of multilayered structures and its application to deconvolute thickness/mechanical properties of glue used in surface force apparatus. In: Journal of Colloid and Interface Science, 308 (2). pp. 551-561.

Math, Souvik and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part 1. Experimental validation of stresses and strains derived using Hankel transform technique in an elastic film/substrate system. In: Journal of Materials Research, 21 (3). pp. 774-782.

Math, Souvik and Suresha, SJ and Jayaram, V and Biswas, SK (2006) Indentation of a hard film on a compliant substrate: film fracture mechanisms to accommodate substrate plasticity. In: Journal of Materials Science, 41 (23). pp. 7830-7837.

Menezes, PL and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer: role of surface texture. In: Tribology Letters, 24 (3). pp. 265-273.

Menezes, Pradeep L and *, Kishore and Kailas, Satish V (2009) Role of surface texture of harder surface on subsurface deformation. In: Wear, 266 (1-2). pp. 103-109.

Menezes, Pradeep L and *, Kishore and Kailas, Satish V (2009) Studies on friction and formation of transfer layer when Al-4Mg alloy pins slid at various numbers of cycles on steel plates of different surface texture. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 525-534.

Menezes, Pradeep L and Kailas, Satish V (2009) Study of Friction and Transfer Layer Formation in Copper-Steel Tribo-System: Role of Surface Texture and Roughness Parameters. In: Tribology Transactions, 52 (5). pp. 611-622.

Menezes, Pradeep L and Kailas, Satish V and Kishore, * (2006) Effect of Surface Topography on Friction and Transfer Layer Formation during Sliding. In: Proceedings of The Third Asia International Conference on Tribology ASIATRIB 2006 , 2006, Kanazawa, Japan.

Menezes, Pradeep L and Kailas, Satish V and Kishore, * (2006) Influence of Roughness Parameters on Friction and Transfer Layer Formation. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Menezes, Pradeep L and Kailas, Satish V and Kishore, * and Kumar, K (2006) Influence of Friction During Forming Processes - A Study Using Numerical Simulation Technique. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Menezes, Pradeep L and Kailas, Satish V and Shimjith, M (2006) Role of Surface texture on Friction and Transfer Layer Formation when Mg-8Al Alloy Slid Against Steel Counterface. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Effect of Roughness Parameter and Grinding Angle on Coefficient of Friction When Sliding of Al–Mg Alloy Over EN8 Steel. In: Journal of Tribology-Transactions of the ASME, 128 (4). pp. 697-704.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Effect of directionality of grinding marks on coefficient of friction and formation of transfer layer. In: 9th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2008), July 7-9, Haifa, Israel, July 7-9, Haifa.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Effect of directionality of unidirectional grinding marks on friction and transfer layer formation of Mg on steel using inclined scratch test. In: Materials Science and Engineering A, 429 (1-2). pp. 149-160.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Effect of surface roughness parameters and surface texture on friction and transfer layer formation in tin-steel tribo-system. In: Journal of Materials Processing Technology, 208 (1-3). pp. 372-382.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2010) Influence of Die Surface Textures during Metal Forming-A Study Using Experiments and Simulation. In: Materials and Manufacturing Processes, 25 (9). pp. 1030-1039.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of inclination angle of plate on friction, stick-slip and transfer layer-A study of magnesium pin sliding against steel plate. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 476-484.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of roughness parameters and surface texture on friction during sliding of pure lead over 080 M40 steel. In: International Journal of Advanced Manufacturing Technology, 43 (7-8). pp. 731-743.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Influence of roughness parameters on coefficient of friction under lubricated conditions. In: Sadhana : Academy Proceedings in Engineering Sciences, 33 (3). pp. 181-190.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Influence of surface texture on coefficient of friction and transfer layer formation during sliding of pure magnesium pin on 080 M40 (EN8) steel plate. In: Wear, 261 (5-6). pp. 578-591.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) On the effect of surface texture on friction and transfer layer formation-A study using Al and steel pair. In: Wear, 265 (11-12). pp. 1655-1669.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) The Role of Surface Texture on Friction and Transfer Layer Formation - A Study of Aluminium and Steel Pair using Pin-on-Plate Sliding Tester. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Studies On Friction And Formation Of Transfer Layer In Hcp Metals. In: Journal of Tribology, 131 (1). 031604 -031613.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Studies on friction and formation of transfer Layer in HCP metals. In: 9th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2008), July 7-9, Haifa, Israel, July 7-9, Haifa.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer using inclined scratch. In: Tribology International, 39 (2). pp. 175-183.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Subsurface deformation and the role of surface texture—A study with Cu pins and steel plates. In: Sadhana : Academy Proceedings in Engineering Sciences, 33 (3). pp. 191-201.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) The role of strain rate response on transfer layer formation during sliding. In: 1st International conference on Abrasive Processes, 21-25 September, Cambridge, U.K, 21-25 September, Cambridge.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2012) Analysis of Strain Rates and Microstructural Evaluation during Metal Forming: Role of Surface Texture and Friction. In: TRIBOLOGY TRANSACTIONS, 55 (5). pp. 582-589.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Friction and transfer layer formation in FCC metals: Role of surface texture and roughness parameters. In: 64th STLE Annual Meeting & Exhibition Florida, 2009, USA.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Friction and transfer layer formation in polymer-steel tribo-system: Role of surface texture and roughness parameters. In: Wear, 271 (9-10, ). pp. 2213-2221.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Friction in metal forming processes – A study using experiments and simulation. In: 64th STLE Annual Meeting & Exhibition Florida, 2009, USA.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Influence of alloying element addition on friction and transfer layer formation in Al-Mg system: Role of Surface texture. In: ASME/STLE International Joint Tribology Conference (IJTC2009) Tennessee, 2009, USA.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Influence of tilt angle and grinding angle of the plate on friction and transfer layer formation. In: World Tribology Congress IV Kyoto, 2009, Japan.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Response of Materials During Sliding on Various Surface Textures. In: Journal of Materials Engineering and Performance, 20 (8). pp. 1438-1446.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) The Role of Strain Rate Response on Tribological Behavior of Metals. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 135 (1).

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Role of Surface Texture, Roughness, and Hardness on Friction During Unidirectional Sliding. In: Tribology Letters, 41 (1). pp. 1-15.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) Tribological response of soft materials sliding against hard surface textures at various numbers of cycles. In: LUBRICATION SCIENCE, 25 (2, SI). pp. 79-99.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) The role of surface texture on friction and transfer layer formation during repeated sliding of Al-4Mg against steel. In: Wear, 271 (9-10, ). pp. 1785-1793.

Menezes, Pradeep L and Kishore, * and Kailas, SatishV and Bobjib, MS (2010) Influence of tilt angle of plate on friction and transfer layer—A study of aluminium pin sliding against steel plate. In: Tribology International, 43 (5-6). 897 -905.

Menezes, Pradeep L and Kumar, K and Kishore, R and Kailas, Satish V (2009) Influence of friction during forming processes-a study using a numerical simulation technique. In: The International Journal of Advanced Manufacturing Technology, 40 (11-12). pp. 1067-1076.

Menon, KAP and Hariharan, R (1979) A New Liquid Level Sensor for Process-Control Applications. In: Transactions on Instrumentation and Measurement, 28 (2). 155-158 .

Menon, Midhun S and Ananthasuresh, GK and Ghosal, Ashitava (2013) Natural motion of one-dimensional flexible objects using minimization approaches. In: Mechanism and Machine Theory, 67 . pp. 64-76.

Miglani, Ankur and Basu, Saptarshi and Kumar, Ranganathan (2014) Insight into instabilities in burning droplets. In: PHYSICS OF FLUIDS, 26 (3).

Miglani, Ankur and Joo, Daniel and Basu, Saptarshi and Kumar, Ranganathan (2013) Nucleation dynamics and pool boiling characteristics of high pressure refrigerant using thermochromic liquid crystals. In: International Journal of Heat and Mass Transfer, 60 . pp. 188-200.

Milton, SG and Arakeri, VH (1992) Studies on Cavitation Inception Process in Separated Flows. In: Journal of Fluids Engineering, 114 (1). pp. 85-92.

Mimani, A and Munjal, ML (2012) 3-D acoustic analysis of elliptical chamber mufflers having an end-inlet and a side-outlet: An impedance matrix approach. In: Wave Motion, 49 (2). pp. 271-295.

Mimani, A and Munjal, ML (2011) 3D Acoustic Analysis Of Spherical Chamber Having Single Inlet And Multiple Outlet: An Impedance Matrix Approach. In: International Applied Mechanics, 3 (4). pp. 685-710.

Mimani, A and Munjal, ML (2012) Acoustical behavior of single inlet and multiple outlet elliptical cylindrical chamber muffler. In: NOISE CONTROL ENGINEERING JOURNAL, 60 (5). pp. 605-626.

Mimani, A and Munjal, ML (2012) On the Role of Higher-Order Evanescent Modes in End-Offset Inlet and End-Centered Outlet Elliptical Flow-Reversal Chamber Mufflers. In: INTERNATIONAL JOURNAL OF ACOUSTICS AND VIBRATION, 17 (3). pp. 139-154.

Mimani, A and Munjal, ML (2011) Three-dimensional acoustic analysis of an elliptical chamber muffler with a side inlet and a side outlet. In: 18th International Congress on Sound and Vibration, 10-14 July 2011, Rio de Janeiro.

Mimani, A and Munjal, ML (2011) Transverse plane wave analysis of short elliptical chamber mufflers: An analytical approach. In: Journal of Sound and Vibration, 330 (7). pp. 1472-1489.

Mishra, DP and Paul, PJ and Mukunda, HS (1994) Stretch effects extracted from propagating spherical premixed flames with detailed chemistry. In: 25th International Symposium on Combustion, JUL 31-AUG 05, 1994, IRVINE, CA.

Mishra, DP and Pau, PJ and Mukunda, HS (1994) Stretch effects extracted from inwardly and outwardly propagating spherical premixed flames. In: Combustion and Flame, 97 (1). pp. 35-47.

Mishra, S and Basu, S (2011) A computational study of flame dynamics on soot production and transport for an acetylene-air laminar diffusion flame in the field of a convecting line vortex. In: Seventh Mediterranean Combustion Symposium, Sept. 11-15, 2011, Sardinia, Italy.

Mishra, S and Basu, S (2011) A computational study of heat transfer, soot production and transport in an acetylene-air laminar diffusion flame in the field of a line vortex. In: 21st National and 10th ISHMT-ASME Heat and Mass Transfer Conference, December 27-30, 2011, Indian Institute of Technology Madras, Chennai in .

Mishra, Shantanu and Santhosh, R and Basu, Saptarshi (2013) Scalar transport in diffusion flame wrapped up by an air and fuel side vortex. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 47 . pp. 32-40.

Mitra, Nibedita and Vijayan, Kalyani and Pramila Bai, BN and Biswas, SK (1993) Phase Transformation Introduced by Mechanical and Chemical Surface Preparations of Tetragonal Zirconia Polycrystals. In: Journal of the American Ceramic Society, 76 (2). pp. 533-535.

Mitra, S and Srinivasan, K and Kumar, P and Murthy, SS and Dutta, P (2014) Solar driven Adsorption Desalination system. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 2261-2269.

Mohan, Madan A and Anand, TNC and Ravikrishna, RV (2012) Experimental spray characterisation of air-assisted impinging jets. In: 12th International Conference on Liquid Atomization and Spray Systems, September 2-6, 2012, Heidelberg, Germany.

Mohan, SJ and Pratap, R (2002) A Group Theoretic Approach to the Linear Free Vibration Analysis of Shells with Dihedral Symmetry. In: Journal of Sound and Vibration, 252 (2). pp. 371-341.

Mohan, Sai Jagan and Pratap, Rudra (2004) A natural classification of vibration modes of polygonal ducts based on group theoretic analysis. In: Journal of Sound and Vibration, 269 (3-5). pp. 745-764.

Mohan , S and Rohatgi, PK (1979) Technology-assessment for development. In: Journal of Scientific & Industrial Research (JSIR), 38 (5). pp. 250-251.

Mohanty, Atanu K and Chakraborty, Kanad and Chatterjee, Anindya (2007) A Combinatorial Optimization Problem for High Order PODs with Few Sensors. In: Journal of Vibration and Acoustics, 129 (2). pp. 252-255.

Mohite, SS and Kesari, Haneesh and Sonti, VR and Pratap, Rudra (2005) Analytical solutions for the stiffness and damping coefficients of squeeze films in MEMS devices with perforated back plates. In: Journal of Micromechanics and Microengineering, 15 (11). pp. 2083-2092.

Mohite, Suhas and Patil, Nishad and Pratap, Rudra (2006) Design, modelling and simulation of vibratory micromachined gyroscopes. In: International MEMS Conference 2006, MAY 09-12, 2006, Singapore, SINGAPORE, pp. 757-763.

Mohite, Suhas S and Sonti, Venkata R and Pratap, Rudra (2008) A Compact Squeeze-Film Model Including Inertia, Compressibility, and Rarefaction Effects for Perforated 3-D MEMS Structures. In: Journal of Microelectromechanical Systems, 17 (3). pp. 709-723.

Mondal, RN and Govardhan, G (2007) Particle Image Velocimetry (PIV) and pressure measurements for supersonic flow over protrusions. In: Conference on Advances in Space Science and Technology (CASST'2007), , 29-31 January 2007, IISc, Bangalore.

Morse, TL and Govardhan, RN and Williamson, CHK (2008) The effect of end conditions on the vortex-induced vibration of cylinders. In: Journal of Fluids and Structures, 24 (8). pp. 1227-1239.

Mourya, Rahul and Chatterjee, Anindya (2008) Anomalous Frictional Behavior in Collisions of Thin Disks Revisited. In: Journal of Applied Mechanics, 75 (2). 024501-1-024501-3.

Mruthyunjaya, TS (1973) Graphical Method For Synthesis Of Crank-Links. In: Journal Of Mechanical Engineering Science, 15 (1). pp. 79-80.

Mruthyunjaya, TS (1973) Synthesis of plane linkages to generate functions of two variables using point position reductionâII. Sliding inputs and outputs. In: Mechanism and Machine Theory, 7 (4). pp. 399-405.

Mruthyunjaya, TS (1972) Synthesis of plane linkages to generate functions of two variables using point position reduction—II. Sliding inputs and outputs. In: Mechanism and Machine Theory, 7 (4). pp. 399-405.

Mruthyunjaya, TS (1972) Synthesis of plane linkages to generate functions of two variables using point-position reduction—Part 1. Rotary inputs and output. In: Mechanism and Machine Theory, 7 (3). pp. 363-370.

Mruthyunjaya, TS (1984) A computerized methodology for structural synthesis of kinematic chains: Part 1- Formulation. In: Mechanism and Machine Theory, 19 (6). pp. 487-495.

Mruthyunjaya, TS (1984) A computerized methodology for structural synthesis of kinematic chains: Part 2 - Application to several fully or partially known cases. In: Mechanism and Machine Theory, 19 (6). pp. 497-505.

Mruthyunjaya, TS (1984) A computerized methodology for structural synthesis of kinematic chains: Part 3 - application to the new case of 10-link, three- freedom chains. In: Mechanism and Machine Theory, 19 (6). pp. 507-530.

Mruthyunjaya, TS (1975) A note on synthesis of the general, two-degree-of-freedom linkage. In: Mechanism and Machine Theory, 10 (1). pp. 77-80.

Mruthyunjaya, TS and Balasubramanian, HR (1987) In quest of a reliable and efficient computational test for detection of isomorphism in kinematic chains. In: Mechanism and Machine Theory, 22 (2). pp. 131-139.

Mruthyunjaya, TS and Raghavan, MR (1984) Computer-aided analysis of the structure of kinematic chains. In: Mechanism and Machine Theory, 19 (3). pp. 357-368.

Mruthyunjaya, TS and Raghavan, MR (1979) Structural-analysis of kinematic chains and mechanisms based on matrix representation. In: Transactions of the ASME. Journal of Mechanical Design, 101 (3). pp. 488-494.

Mruthyunjaya, TS (1979) Structural synthesis by transformation of binary chains Strukturelle synthese durch umwandlung binaerer ketten. In: Mechanism and Machine Theory, 14 (4). pp. 221-231.

Mukherjee, NK and Munjal, ML (2009) Flow-acoustic analysis of diesel particulate filter. In: UNSPECIFIED, November 2009, Hyderabad.

Mukherjee, S and Jayaram, V and Biswas, SK (2006) Validation of stresses and stress intensity factor in a notched bilayer system under four point bending, as determined by the solution of the Navier’s equation. In: International Journal of Mechanical Sciences, 48 (11). pp. 1287-1294.

Mukhopadhy, Ananya and Biswas, SK (1991) Indentation of sintered alumina clay composite - an experimental discussion of a combined Boussinesq and blister stress field approach. In: Philosophical Magazine Letters, 64 (2). pp. 77-82.

Munjal, ML (1997) Acoustic analysis and parametric studies of lagged pipes. In: Noise Control Engineering Journal, 45 (3). pp. 113-118.

Munjal, ML (1998) Acoustic lagging of pipes. In: Noise & Vibration Worldwide, 29 (11). pp. 14-16.

Munjal, ML (1990) Advances in the acoustics of flow ducts and mufflers. In: Sadhana, 15 (2). pp. 57-72.

Munjal, ML and Thawani, PT (1997) Acoustic analysis and design of compliant cable-hose systems. In: Noise Control Engineering Journal, 45 (6). pp. 235-242.

Munjal, ML and Thawani, PT (1997) Effect of protective layer on the performance of absorptive ducts. In: Noise Control Engineering Journal, 45 (1). pp. 14-18.

Munjal, ML (1998) Analysis and Desigh of Mufflers — An Overview of Research at the Indian Institute of Science. In: Indo-USA Symposium on Emerging Trends in Vibration and Noise Engineering, 18-20 March 1996, Delhi, India, pp. 425-433.

Munjal, ML (2003) Analysis and design of pod silencers. In: Journal of Sound and Vibration, 262 (3). pp. 497-507.

Munjal, ML (2009) Automotive noise control in India- State of the Art. In: All India Seminar on Active and Passive Noise Control, Institution of Engineers India, Guwahati, November 2009.

Munjal, ML (2006) Automotive noise scenario in 2005-06. In: Proceedings of ETIME 2006, Feb 2006, BMSCE, Bangalore.

Munjal, ML (2009) Glimpses of aeroacoustic activities in India. In: International Conference on Frontiers in Fluid Mechanics (ICFFM-09) Bangalore, September 2009, Bangalore.

Munjal, ML (2006) Muffler design for automotive engines. In: ICAME 2006 SRM University, 14-16 Dec 2006, Kattankulathur.

Munjal, ML (1988) On the cut‐on frequencies of a large round duct with azimuthal as well as radial partitions. In: Journal of the Acoustical Society of America, 84 (5). pp. 1936-1939.

Munjal, ML (1997) Plane wave analysis of side inlet/outlet chamber mufflers with mean flow. In: Applied Acoustics, 52 (2). pp. 165-175.

Munjal, ML (1998) Prediction of the break-out noise of the cylindrical sandwich plate muffler shells. In: Applied Acoustics, 53 (1-3). pp. 153-161.

Munjal, ML (2013) Recent advances in muffler acoustics. In: International Journal of Acoustics and Vibration, 18 (2). pp. 71-85.

Munjal, ML (1993) Response of a Multi-Layered Infinite Plate to an Oblique Plane Wave by Means of Transfer Matrices. In: Journal of Sound and Vibration, 162 (2). pp. 333-343.

Munjal, ML (2006) State of the art of the diesel engine and genset noise control. In: Workshop on Noise Control Measures for D.G. Sets, 15 Nov 2006, NPL, New Delhi.

Munjal, ML (2006) Technological measures for noise control. In: Workshop on Noise Pollution, 22 April 2006, New Delhi.

Munjal, ML (2009) Theory and design of tuned extended-tube chambers and concentric tube resonators. In: NSA, November 2009, Hyderabad.

Munjal, ML (1975) Velocity ratio-cum-transfer matrix method for the evaluation of a muffler with mean flow. In: Journal of Sound and Vibration, 39 (1). pp. 105-119.

Munjal, ML (2001) An error inherent in the use of the two-microphone method for gas pulsation measurement in a reflective environment. In: Journal of Sound and Vibration, 242 (3). pp. 539-541.

Munjal, ML (1975) A rational synthesis of vibration isolators. In: Journal of Sound and Vibration, 39 (2). pp. 247-263.

Munjal, ML (1987) A simple numerical method for three-dimensional analysis of simple expansion chamber mufflers of rectangular as well as circular cross-section with a stationary medium. In: Journal of Sound and Vibration, 116 (1). pp. 71-88.

Munjal, ML and Behera, BK and Thawani, PT (1998) Transfer matrix model for the reverse-flow, three-duct, open end perforated element muffler. In: Applied Acoustics, 54 (3). pp. 229-238.

Munjal, ML and Doige, AG (1990) On the relation between convective source characteristics and their acoustic counterparts. In: Journal of Sound and Vibration, 136 (2). pp. 343-346.

Munjal, ML and Doige, AG (1989) On uniqueness, transfer and combination of acoustic sources in one-dimensional systems. In: Journal of Sound and Vibration, 128 (1). 165 -166.

Munjal, ML and Doige, AG (1990) Symmetry of one-dimensional dynamical systems in terms of transfer matrix parameters. In: Journal of Sound and Vibration, 136 (3). pp. 467-475.

Munjal, ML and Doige, AG (1990) Theory of a two source-location method for direct experimental evaluation of the four-pole parameters of an aeroacoustic element. In: Journal of Sound and Vibration, 141 (2). pp. 323-333.

Munjal, ML and Doige, AG (1990) The two-microphone method incorporating the effects of mean flow and acoustic damping. In: Journal of Sound and Vibration, 137 (1). pp. 135-138.

Munjal, ML and Doige, AG (1988) Authors reply to "On uniqueness, transfer and combination of acoustic sources in one-dimensional systems". In: Journal of Sound and Vibration, 121 (1). pp. 25-35.

Munjal, ML and Eriksson, LJ (1989) Analysis of a hybrid noise control system for a duct. In: Journal of the Acoustical Society of America, 86 (2). pp. 832-834.

Munjal, ML and Eriksson, LJ (1989) Analysis of a linear one-dimensional active noise control system by means of block diagrams and transfer functions. In: Journal of Sound and Vibration, 129 (3). pp. 443-455.

Munjal, ML and Gowtham, GSH and Venkatesham, B and Reddy, Hari Krishna M (2010) Prediction of breakout noise from an elliptical duct of finite length. In: Noise Control Engineering Journal (NCEJ), 58 (3). pp. 319-327.

Munjal, ML and Heckl, M (1982) Some mechanisms of excitation of a railway wheel. In: Journal of Sound and Vibration, 81 (4). pp. 477-489.

Munjal, ML and Heckl, M (1982) Vibrations of a periodic rail-sleeper system excited by an oscillating stationary transverse force. In: Journal of Sound and Vibration, 81 (4). pp. 491-500.

Munjal, ML and Krishnan, S and Reddy, MM (1993) Flow-Acoustic Performance of Perforated Element Mufflers With Application to Design. In: Noise Control Engineering Journal (NCEJ), 40 (1). pp. 159-167.

Munjal, ML and Mimani, A and Rao, PS (2009) A novel one-dimensional analysis of short end-chamber and expansion chamber mufflers. In: The Sixteenth International Conference on Sound and Vibration (ICSV16, July 2009.

Munjal, ML and Mukherjee, NK (2011) Plane wave analysis of rectangular axial-inlet, axial-outlet and transverse-inlet, transverse-outlet air cleaners. In: Noise Control Engineering Journal (NCEJ), 59 (5). pp. 447-463.

Munjal, ML and Narasimhan, MV and Sreenath, AV (1973) A rational approach to the synthesis of one-dimensional acoustic filters. In: Journal of Sound and Vibration, 29 (3). pp. 263-280.

Munjal, ML and Narayana, TSS (2006) A test element reversal method for measurement of acoustic four-pole parameters: theory and experiment. In: NSA 2006, 16-17 Nov 2006, NPL, New Delhi.

Munjal, ML and Prasad, MG (1986) On plane-wave propagation in a uniform pipe in the presence of a mean flow and a temperature gradient. In: Journal of the Acoustical Society of America, 80 (5). 1501 -1506.

Munjal, ML and Rao, KN and Sahasrabudhe, AD (1987) Aeroacoustic Analysis Of Perforated Muffler Components. In: Journal of Sound and Vibration, 114 (2). pp. 173-188.

Munjal, ML and Shirahatti, US (1987) Analysis of Lined Ducts With Mean Flow, With Application to Dissipative Mufflers. In: Journal of Vibration, Acoustics, Stress, and Reliability in Design, 109 . p. 367.

Munjal, ML and Sreenath, AV and Narasimhan, MV (1973) Velocity ratio in the analysis of linear dynamical systems. In: Journal of Sound and Vibration, 26 (2). pp. 173-191.

Munjal, ML and Thawani, PT (1996) Acoustic performance of hoses - A parametric study. In: Noise Control Engineering Journal (NCEJ), 44 (6). pp. 274-280.

Munjal, ML and Thawani, PT (1983) On the transfer matrix for a uniform tube with a moving medium. In: Journal of Sound and Vibration, 91 (4). pp. 597-599.

Munjal, ML and Thawani, PT (1997) Prediction of the vibro-acoustic transmission loss of planar hose-pipe systems. In: Journal of the Acoustical Society of America, 101 (1 part). pp. 2524-2535.

Munjal, ML and Vijayasree, NK and Chaitanya, P (2013) Flow resistance network analysis of the back-pressure of automotive mufflers. In: INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 20 (5). pp. 339-349.

Munjal, ML and Vinay, J (1998) Acoustic performance of flexible bellows. In: Journal of the Acoustical Society of America, 104 (4). p. 2040.

Murali, S and Arvind, TS and Raman, KS and Murthy, KSS (1997) Fatigue properties of sand cast, stircast and extruded Al-7Si-0.3 Mg alloy with trace additions of Be and Mn. In: Materials Transactions, JIM, 38 (1). pp. 28-36.

Murali, S and Muthukkaruppan, S and Raman, KS and Murthy, KSS (1997) Stir cast and extruded Al-7Si-0.3Mg alloy containing iron and beryllium. In: Materials Science and Technology, 13 (4). pp. 337-442.

Murali, S and Ramachandra, M and Murthy, KSS and Raman, KS (1996) Development of electropolishing techniques on metals and alloys. In: Praktische Metallographie, 33 (7). pp. 359-368.

Murali, P and Guo, TF and Zhang, YW and Narasimhan, R and Li, Y and Gao, HJ (2011) Atomic Scale Fluctuations Govern Brittle Fracture and Cavitation Behavior in Metallic Glasses. In: Physical Review Letters, 107 (21).

Murali, P and Narasimhan, R and Guo, TF and Zhang, YW and Gao, HJ (2013) Shear bands mediate cavitation in brittle metallic glasses. In: SCRIPTA MATERIALIA, 68 (8). pp. 567-570.

Murali, S and Arunkumar, Y and Chetty, PVJ and Raman, KS and Murthy, KSS (1997) The effect of preaging on the delayed aging of Al-7Si-0.3Mg. In: Journal of the Minerals Metals & Materials Society (JOM), 49 (2). pp. 29-33.

Murali, S and Kashyap, KT and Raman, KS and Murthy, KSS (1993) Inhibition of delayed ageing by trace additions in Al---7Si---0.3Mg cast alloy. In: Scripta Metallurgica et Materialia, 29 (11). 1421-1426 .

Murali, S and Ramachandra, M and Murthy, KSS and Raman, KS (1997) Electropolishing of Al-7Si-0.3Mg Cast Alloy by Using Perchloric and Nitric Acid Electrolytes. In: Materials Characterization, 38 (4-5). pp. 273-286.

Murali, S and Raman, KS and Murthy, KSS (1996) A1-7Si-0.3Mg cast alloy: Formation and crystal structure of beta-FeSiAl5 and (Be-Fe)-BeSiFe2Al8 phases. In: 5th International Conference on Aluminium Alloys - Their Physical and Mechanical Properties (ICAA5), JUL 01-05, 1996, GRENOBLE, FRANCE.

Murali, S and Raman, KS and Murthy, KSS (1995) The formation of ?-FeSiAl5 and Be---Fe phases in Al---7Si---0.3Mg alloy containing Be. In: Materials Science and Engineering A, 190 (1-2). pp. 165-172.

Murali, S and Trivedi, A and Shamanna, KS and Murthy, KSS (1996) Effect of iron and combined iron and beryllium additions on the fracture toughness and microstructures of squeeze-cast Al-7Si-0.3Mg alloy. In: Journal of Materials Engineering and Performance, 5 (4). pp. 462-468.

Murthy, MVVS and Gopalakrishnan, S and Nair, PS (2007) A New Locking Free Higher Order Finite Element Formulation for Composite Beams. In: Computers, Materials & Continua, 5 (1). pp. 43-62.

Murthy, VSR and Seshan, S and Kishore, * (1984) Characteristics of compacted graphite cast iron. In: Transactions of the American Foundrymen's Society, 92 . pp. 373-380.

Murthy, VSR and Seshan, S and Kishore, * (1987) Fractographic features of C.G.iron subjected to tension and fatigue. In: Microstructural Sciences, 15 . pp. 123-138.

Murthy, Dakshina HB and Raghavan, MR (1972) Compliance of rough cylinders in compression. In: Wear, 20 (3). pp. 353-369.

Murthy, HB Dakshina and Raghavan, MR (1974) The real area of contact and compliance of rough cylinders in compression. In: Wear, 27 (1). pp. 47-60.

Murthy, NS and Rakesh, N and Srinath, LS (1983) Effect of specimen thickness on mode I stress intensity factor in photoelastic investigations. In: Engineering Fracture Mechanics, 18 (6). pp. 1201-1205.

Murthy, Srinivasa N and Rao, Raghavendra P (1985) Determination of mode 1 notch stress intensity factor by the photoelastic technique. In: Engineering Fracture Mechanics, 21 (3). pp. 557-562.

Murthy, VSR and Seshan, S and Seshan, K (1985) Vermicular graphite cast iron current state of the art. In: Sadhana-Academy Proceedings in Engineering Sciences, 8 (Octobe). pp. 361-372.

Murty, CVS and Richter, W and Murthy, MVK (1989) Modeling Of Thermal-Radiation In Fired Heaters. In: Chemical Engineering Research and Design, 67 (2). pp. 134-144.

Murugan, S and Mada, Sankaraiah and Munjal, ML (2009) Cockpit noise reduction using mufflers and silencers in a fighter aircraft. In: UNSPECIFIED, November 2009.

Muthukamarasamy, S and Seshan, S (1993) Microstructural features of ZA-27 alloy based particulate reinforced metal matrix composites. In: Metals Materials and Processes, 5 (2). pp. 107-110.

Muthukumar, R and Raghavan, MR (1987) Estimation of gear tooth deflection by the finite element method. In: Mechanism and Machine Theory, 22 (2). pp. 177-181.

Muthukumarasamy, S and Guruprasad, A and Sudhakar, A and Seshan, S (1996) The Performance of Zinc Alloy Based Metal Matrix Composites Produced Through Squeeze Casting. In: Materials and Manufacturing Processes, 11 (3). pp. 351-366.

N

Nadge, P and Govardhan, R (2012) Evolution of coherent vortical structures in turbulent flow over backward-facing step. In: 65th Annual Meeting of the APS Division of Fluid Dynamics, November 18-20, 2012, San Diego, CA.

Nagaraj, H S and Hariharan, R (1973) Flow-graph techniques for epicyclic gear train analysis. In: International Journal of Control,, 17 (2). 263 -272.

Nagaraj, HS and Gurumoorthy, B (2002) Machinable volume extraction for automatic process planning. In: IIE Transactions, 34 (4). pp. 393-410.

Nagaraj, HS and Hariharan, R (1973) Solution of a class of vibration problems by flowgraph methods. In: International Journal of Control, 17 (3). pp. 577-586.

Nagaraj, HS and Hariharan, Ramesh (1973) step-up epicyclic gear-train and flowgraph analysis. In: International Journal of Control, 17 (5). pp. 1059-1063.

Nagaraj, BP and Nataraju, BS (1997) Dynamics Of A Two-Link Flexible System Undergoing Locking: Mathematical Modelling And Comparison With Experiments. In: Journal of Sound and Vibration, 207 (4). pp. 567-589.

Nagaraj, BP and Pandiyan, R and Ghosal, Ashitava (2010) A constraint Jacobian based approach for static analysis of pantograph masts. In: Computers & Structures, 88 (1-2). pp. 95-104.

Nagaraj, BP and Pandiyan, R and Ghosal, Ashitava (2009) Kinematics of pantograph masts. In: Mechanism and Machine Theory, 44 (4). pp. 822-834.

Nagaraj, K and Ramkumar, K (1984) Static RAM cell for ternary logic. In: Proceedings of the IEEE, 72 (2). pp. 227-228.

Nagarajan, VS and Muthu, DVS and Asif, Syed SA and Sood, AK and Biswas, SK (1994) Raman spectroscopic studies of phase transformations induced by a notch cut on a 3Y-TZP sample. In: Materials Science & Engineering A, 174 (2). L37-L40.

Nagendra, HR and Tirunarayanan, MA (1970) Laminar film condensation from nonisothermal vertical flat plates. In: Chemical Engineering Science, 25 (6). pp. 1073-1079.

Nagendra, HR (1973) Effect of inclination on laminar film condensation. In: Applied Scientific Research, 28 (1). pp. 261-277.

Nagendra, HR and Tirunarayanan, MA (1971) Free convection heat transfer between vertical parallel plates. In: Nuclear Engineering and Design, 15 . pp. 17-28.

Nagendra, HR and Tirunarayanan, MA and Ramachandran, A (1969) Free convection heat transfer from vertical cylinders and wires. In: Chemical Engineering Science, 24 (9). pp. 1491-1495.

Nagendra, HR and Tirunarayanan, MA and Ramachandran, A (1971) Free convection heat transfer from vertical cylinders part I: Power law surface temperature variation. In: Nuclear Engineering and Design, 16 (2). pp. 153-162.

Nagendra, HR and Tirunarayanan, MA and Ramachandran, A (1971) Free convection heat transfer from vertical cylinders part II: Exponential surface temperature variation. In: Nuclear Engineering and Design, 16 (2). pp. 163-168.

Naidu, DVP and Rajan, R and Kumar, R and Gandhi, KS and Arakeri, VH and Chandrasekaran, S (1994) Modelling of a batch sonochemical reactor. In: Chemical Engineering Science, 49 (6). 877-888 .

Naidu, Prasad DV and Rajan, R and Kumar, R and Gandhi , KS and Arakeri, VH (1994) Modelling of a batch sonochemical reactor. In: Chemical Engineering Science, 49 (6). pp. 877-888.

Nair, Prapanch and Tomar, Gaurav (2014) An improved free surface modeling for incompressible SPH. In: COMPUTERS & FLUIDS, 102 . pp. 304-314.

Nalama, PC and Sarinb, R and Biswasa, SK (2006) Dry sliding tribology of dioctyldithiophosphoric acid deposited on steel at $150{^o}$C. In: Tribology Letters, 23 (3). pp. 231-241.

Nallasamy, M and Prasad, K Krishna (1974) Numerical studies on quasilinear and linear elliptic equations. In: Journal of Computational Physics, 15 (4). pp. 429-448.

Nallasamy, M and Prasad, Krishna K (1977) On cavity flow at high Reynolds numbers. In: Journal of Fluid Mechanics, 79 (02). pp. 391-414.

Nandakumar, K and Wahi, Pankaj and Chatterjee, Anindya (2009) Infinite Dimensional Slow Modulations In A Delayed Model For Orthogonal Cutting Vibrations. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa, Israel, pp. 665-672.

Nandakumar, K and Chatterjee, Anindya (2009) Continuation of limit cycles near saddle homoclinic points using splines in phase space. In: Nonlinear Dynamics, 57 (3). pp. 383-399.

Nandakumar, K and Chatterjee, Anindya (2005) Higher-Order Pseudoaveraging via Harmonic Balance for Strongly Nonlinear Oscillations. In: Journal of Vibration and Acoustics, 127 (4). pp. 416-419.

Nandakumar, K and Chatterjee, Anindya (2010) Nonlinear secondary whirl of an overhung rotor. In: Proceedings of the royal society a-mathematical physical and engineering sciences, 466 (2113). pp. 283-301.

Nandakumar, K and Chatterjee, Anindya (2005) Resonance, parameter estimation, and modal interactions in a strongly nonlinear benchtop oscillator. In: Nonlinear Dynamics, 40 (2). pp. 149-167.

Nandakumaran, K and Wahi, Pankaj and Chatterjee, Anindya (2010) Infinite dimensional slow modulations in a well known delayed model for cutting tool vibrations. In: Nonlinear Dynamics, 62 (4). pp. 705-716.

Nandy, Arup Kumar and Jog, CS (2012) Optimization of vibrating structures to reduce radiated noise. In: Structural and Multidisciplinary Optimization, 45 (5). pp. 717-728.

Narasimhan, MV and Adinarayan, TV (1990) Evaluation of Displacement - Time Characteristics of Stirling Engine Drive Mechanisms - II. In: Proceedings of the 25th Intersociety Energy Conversion Engineering Conference, 1990. IECEC-90, 12-17 Aug. 1990, Reno, NV, USA, pp. 336-340.

Narasimhan, Arunn and Reddy, BVK and Dutta, Pradip (2012) Thermal management using the bi-disperse porous medium approach. In: International Journal of Heat and Mass Transfer, 55 (4). pp. 538-546.

Narasimhan, R (2004) Analysis of indentation of pressure sensitive plastic solids using the expanding cavity model. In: Mechanics of Materials, 36 (7). pp. 633-645.

Narasimhan, R (1994) A Numerical Study of Fracture Initiation in a Ductile Material Containing a Dual Population of Second-Phase Particles-I. Static Loading. In: Engineering Fracture Mechanics, 47 (6). pp. 919-934.

Narasimhan, R (1994) A numerical study of fracture initiation in a ductile material containing a dual population of second-phase particles-II. Dynamic loading. In: Engineering Fracture Mechanics, 47 (6). pp. 935-948.

Narasimhan, R and Basu, S (1999) Numerical simulations of fracture initiation in ductile solids under mode I, dynamic loading. In: Bulletin of Materials Science, 22 (5). pp. 891-900.

Narasimhan, R and Biswas, SK (1998) A finite element study of the indentation mechanics of an adhesively bonded layered solid. In: International Journal of Mechanical Sciences, 40 (4). pp. 357-370.

Narasimhan, R and Subramanya, HY and Patil, SD and Tandaiya, Parag and Ramamurty, U (2009) Stationary crack tip fields in elastic-plastic solids: an overview of recent numerical simulations. In: Journal Of Physics D-Applied Physics, 42 (21). 214005-1-214005-15.

Narayan, GA and Nalluri, SRPR and Gurumoorthy, B (1997) Feature-based geometric reasoning for process planning. In: Sadhana-Academy Proceedings In Engineering Sciences, 22 (Part 2). pp. 217-240.

Narayan, Manish and Surappa, MK and Bai, Pramila BN (1995) Dry sliding wear of Al alloy 2024-Al203 particle metal matrix composites. In: Wear, 181 (part 2). pp. 563-570.

Narayan, Shankar S and Nair, PS and Ghosal, Ashitava (2008) Dynamic interaction of rotating momentum wheels with spacecraft elements. In: Journal of Sound and Vibration, 315 (4-5). pp. 970-984.

Narayana, TSS and Munjal, ML (2005) Prediction and measurement of the four-pole parameters of a muffler including higher order mode effects. In: Noice Control Engineering Journal, 53 (6). pp. 240-246.

Narayana Rao, K and Munjal, ML (1986) Noise reduction with perforated three-duct muffler components. In: Sadhana : Academy Proceedings in Engineering Sciences, 9 (4). pp. 255-269.

Narendar, S and Gupta, SS and Gopalakrishnan, S (2011) Longitudinal Magnetic Field Effect on Nonlocal Ultrasonic Vibration Analysis of Single-Walled Carbon Nanotubes Based on Wave Propagation Approach. In: Advanced Science Letters, 4 (11-12). pp. 3382-3389.

Narendar, S and Gupta, SS and Gopalakrishnan, S (2012) Wave propagation in single-walled carbon nanotube under longitudinal magnetic field using nonlocal Euler-Bernoulli beam theory. In: APPLIED MATHEMATICAL MODELLING, 36 (9). pp. 4529-4538.

Nath, Pandari S and Pratap, Rudra (1999) Frequency shift analysis for comb drive structures. In: SPIE:Indo-Russian Workshop on Micromechanical Systems, Vol.3903, 2-4 Febrauary 1999, New Delhi, India, pp. 45-58.

Nath, Deo and Biswas, SK and Rohatgi, PK (1980) Wear characteristics and bearing performance of aluminium-mica particulate composite material. In: Wear, 60 (1). pp. 61-73.

Nath, Deo and Bhatt, RT and Biswas, SK (1980) Mechanical Properties of Al-Mica Particulate Composite Material. In: Journal of Engineering Materials and Technology, 102 (1). pp. 78-84.

Nayak, KC and Saha, SK and Srinivasan, K and Dutta, P (2006) A numerical model for heat sinks with phase change materials and thermal conductivity enhancers. In: International Journal of Heat and Mass Transfer, 49 (11). pp. 1833-1844.

O

Oellrich, LR and Leisenheimer, B and Srinivasan, K (1997) Flammability behavior of (octafluoropropane plus propane) and (octafluoropropane plus methane). In: Chemie Ingenieur Technik, 69 (7). pp. 984-986.

Omprakash, S and Narasimhan, R (1996) A finite element analysis of mode III quasi-static crack growth at a ductile-brittle interface. In: Transactions of the ASME: Journal of Applied Mechanics, 63 (1). pp. 204-209.

P

Padmanabha, D and Nair, BG and Ramachandran, A (1970) Effect of vertical vibration on mass transfer from spheres. In: Indian Journal of Technology, 8 (7). pp. 243-247.

Pai, BC and Rohatgi, PK (1978) Production of cast aluminium-graphite particle composites using a pellet method. In: Journal of Materials Science, 13 (2). pp. 329-335.

Pai, Verneker VR and Rao, Rama Mohana J (1982) Effect of Prior Ultraviolet Irradiation on Thermal Decomposition and Ignition of Coal. In: Combustion Science and Technology, 29 (1-2). pp. 95-100.

Pal, D and Chakraborty, S and Dutta, P and Bhattachary, J (2006) An Enthalpy-Based Micro-scale Model for Dendritic Solidification. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.

Pal, Soupitak and Verma, Nisha and Jayaram, Vikram and Biswas, Sanjay Kumar and Riddle, Yancy (2011) Characterization of phase transformation behaviour and microstructural development of electroless Ni-B coating. In: Materials Science and Engineering A, 528 (28). pp. 8269-8276.

Pandey, Ashok K and Pratap, Rudra (2007) Modelling the Effect of Residual Stress and Perforations on the Dynamic Characteristics of MEMS Devices. In: Advances in Vibration Engineering .

Pandey, AK and Pratap, R (2007) Squeeze Film Damping in Perforated MEMS Torsion Mirror. In: International conference on Emerging Mechanical Technology MACRO TO NANO (EMTM2N-2007), , 16-18 February 2007, BITS Pilani.

Pandey, AK and Pratap, R and Chau, FS (2007) Effect of Pressure on Fluid Damping in MEMS Torsional Resonators with Flow Ranging from Continuum to Molecular Regime. In: Experimental Mechanics .

Pandey, AK and Pratap, R and Chau, Fook Siong (2007) Experimental Study of Fluid Damping in Micro Devices with Flow Ranging from Continuum to Molecular Regime. In: MOEMS-MEMS 2007 Micro and Nanofabrication, , 2007, San Jose, CA.

Pandey, Ashok K and Pratap, Rudra (2003) Studies in Nonlinear Effects of Squeeze Film Damping in MEMS Structures. In: International Journal of Computational Engineering Science, 4 (3). pp. 477-480.

Pandey, Ashok Kumar and Pratap, Rudra (2007) Effect of flexural modes on squeeze film damping in MEMS cantilever resonators. In: Journal of Micromechanics and Microengineering, 17 (12). pp. 2475-2484.

Pandey, Ashok Kumar and Pratap, Rudra (2007) A comparative study of analytical squeeze film damping models in rigid rectangular perforated MEMS structures with experimental results. In: Microfluidics and Nanofluidics, 4 (3). pp. 205-218.

Pandey, Ashok Kumar and Pratap, Rudra (2008) A semi-analytical model for squeeze-film damping including rarefaction in a MEMS torsion mirror with complex geometry. In: Journal of Micromechanics and Microengineering, 18 (10). 105003-1-105003-12.

Pandey, Ashok Kumar and Pratap, Rudra and Chau, Fook Siong (2007) Analytical solution of the modified Reynolds equation for squeeze film damping in perforated MEMS structures. In: Sensors and Actuators A: Physical, 135 (2). pp. 839-848.

Pandey, Ashok Kumar and Pratap, Rudra and Chau, Fook Siong (2004) Coupled nonlinear effects of surface roughness and rarefaction on squeeze film damping in MEMS structures. In: Journal of Micromechanics and Microengineering, 14 (10). pp. 1430-1437.

Pandey, Ashok Kumar and Venkatesh, KP and Pratap, Rudra (2009) Effect of metal coating and residual stress on the resonant frequency of MEMS resonators. In: Sadhana-Academy Proceedings In Engineering Sciences, 34 (4). pp. 651-661.

Pandey, Ashok kumar and Pratap, Rudra and Chau, Fook Siong (2007) Influence of Boundary Conditions on the Dynamic Characteristics of Squeeze Films in MEMS Devices. In: Journal of Microelectromechanical Systems, 16 (4). pp. 893-903.

Panicker, VB and Munjal, ML (1981) Aero-Acoustic Analysis Of Mufflers With Flow Reversals. In: Journal of the Indian Institute of Science, 63 (1). pp. 21-38.

Panicker, VB and Munjal, ML (1981) Aero-Acoustic Analysis Of Straight-Through Mufflers With Simple And Extended Tube Expansion Chambers. In: Journal of the Indian Institute of Science, 63 (1). pp. 1-19.

Panicker, VB and Munjal, ML (1981) Impedance tube technology for flow acoustics. In: Journal of Sound and Vibration, 77 (4). pp. 573-577.

Panigrahi, SN and Munjal, ML (2005) Combination mufflers - Theory and parametric study. In: Journal of Noise Control Engineering, 53 (6). pp. 247-255.

Panigrahi, SN and Jog, CS and Munjal, ML (2008) Multi-focus design of underwater noise control linings based on finite element analysis. In: Applied Acoustics, 69 (12). pp. 1141-1153.

Panigrahi, SN and Munjal, ML (2007) Backpressure considerations in designing of cross flow perforated-element reactive silencers. In: Noise Control Engineering Journal, 55 (6). pp. 504-515.

Panigrahi, SN and Munjal, ML (2005) Comparison of various methods for analyzing lined circular ducts. In: Journal of Sound And Vibration, 285 (4-5). pp. 905-923.

Panigrahi, SN and Munjal, ML (2005) Plane wave propagation in generalized multiply connected acoustic filters. In: Journal of The Acoustical Society of America, 118 (5). pp. 2860-2868.

Panigrahi, SN and Munjal, ML (2007) A generalized scheme for analysis of multifarious commercially used mufflers. In: Applied Acoustics, 68 (6). pp. 660-681.

Panigrahi, SN and Munjal, ML and Kumar, Sreehari B (2008) Design enhancement of the underwater noise control linings through a parsimonious parametric study. In: Proc. ICSV15, Daejeon, Korea, Daejeon.

Pardeshi, R and Singh, AK and Dutta, P (2009) Modeling of Solidification Process in a Rotary Electromagnetic Stirrer. In: Numerical Heat Transfer, Part A: Applications, 55 (1). pp. 42-57.

Pardeshi, R and Dutta, Pradip and Singh, AK (2009) Modeling of Convection and Macrosegregation through Appropriate Consideration of Multiphase/Multiscale Phenomena during Alloy Solidification. In: Industrial and Engineerign Chemistry Research, 48 (19). pp. 8789-8804.

Pardeshi, R and Singh, AK and Dutta, P (2008) Simulations of sedimentation in alloy solidification using a continuum model. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Pardeshi, R and Singh, AK and Voller, VR and Dutta, P (2011) A Dual Scale Model for Macrosegregation in Alloy Solidification. In: Numerical Heat Transfer Part A, 59 (12). pp. 934-953.

Pardeshi, R and Voller, VR and Singh, AK and Dutta, P (2008) An explicit–implicit time stepping scheme for solidification models. In: International Journal of Heat and Mass Transfer, 51 (13-14). pp. 3399-3409.

Patel, J and Ananthasuresh, GK (2006) Kinematics of Planar, Radially Foldable Mechanisms using Algebraic Loci. In: Proceedings of the 2005 Aerospace and Related Mechanisms, Nov 18-19 2006, Bangalore, India.

Patel, Jiten and Ananthasuresh, GK (2006) A Kinematic Theory for Planar Hoberman and Other Novel Foldable Mechanisms. In: CD-ROM Proceedings of the ASME International Design Engineering and Technical Conferences, September 10–13, 2006, Philadelphia, Pennsylvania.

Patel, Jiten and Ananthasuresh, GK (2007) A kinematic theory for radially foldable planar linkages. In: International Journal of Solids and Structures, 44 (18-19). pp. 6279-6298.

Pathak, B and Kumar, R and Basu, S (2012) Agglomeration dynamics of an evaporating acoustically levitated droplet. In: 9th European Fluid Mechanics Conference, September 9-13, 2012, Rome, Italy.

Pathak, Binita and Deepu, P and Basu, Saptarshi and Kumar, Ranganathan (2013) Modeling of agglomeration inside a droplet with nanosuspensions in an acoustic field. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 59 . pp. 161-166.

Pathak, Nitin and Kumar, Arvind and Yadav, Anil and Dutta, Pradip (2009) Effects of mould filling on evolution of the solid-liquid interface during solidification. In: Applied Thermal Engineering, 29 (17-18). pp. 3669-3678.

Pathak, Rakesh Kumar and Kumar, Ravi A and Ananthasuresh, GK (2012) Simulations and experiments in punching spring-steel devices with sub-millimeter features. In: North American Manufacturing Research Institution of SME, June 4-8, 2012, Notre Dame, IN, USA.

Patil, Navendu and Mahadevan, Pradeep and Chatterjee, Anindya (2009) Fatigue Laws Via Functional Equations. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa, Israel, pp. 35-42.

Patil, KG and Santhanam, V and Biswasa, SK and Ayappa, KG (2010) Combined Atomic Force Microscopy and Modeling Study of The Evolution of Octadecylamine Films on a Mica Surface. In: The Journal of Physical Chemestry C, 114 (8). pp. 3549-3559.

Patil, Navendu and Mahadevan, Pradeep and Chatterjee, Anindya (2008) A constructive empirical theory for metal fatigue under block cyclic loading. In: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 464 . pp. 1161-1179.

Patil, SD and Narasimhan, R and Mishra, RK (2011) Effect of lattice orientation on crack tip constraint in ductile single crystals. In: Fatigue and Fracture of Engineering Materials and Structures, 34 (8). pp. 604-618.

Patil, Swapnil and Narasimhan, R and Mishra, Raja K (2009) Families of asymptotic tensile crack tip stress fields in elastic-perfectly plastic single crystals. In: International Journal of Fracture, 155 (2). pp. 143-153.

Patil, Swapnil D and Narasimhan, R and Biswas, P and Mishra, RK (2008) Crack Tip Fields in a Single Edge Notched Aluminum Single Crystal Specimen. In: 5th International Conference on Materials Processing Defects (MDP-5), JUL 18-20, 2007, Ithaca, NY.

Patil, Swapnil D and Narasimhan, R and Mishra, RK (2008) A numerical study of crack tip constraint in ductile single crystals. In: Journal of the Mechanics and Physics of Solids, 56 (6). pp. 2265-2286.

Patil, Swapnil D and Narasimhan, R and Mishra, Raja K (2009) Observation of kink shear bands in an aluminium single crystal fracture specimen. In: Scripta Materialia, 61 (5). pp. 465-468.

Patnaik, MNM and Narasimhan, R and Ramamurty, U (2004) Spherical indentation response of metallic glasses. In: Acta Materialia, 52 (11). pp. 3335-3345.

Patra, Ajoy and Bandyopadhyay, Dipankar and Tomar, Gaurav and Sharma, Ashutosh and Biswas, Gautam (2011) Instability and dewetting of ultrathin solid viscoelastic films on homogeneous and heterogeneous substrates. In: Journal of Chemical Physics, 134 (6).

Pendyala, Prashant and Bobji, MS and Madras, Giridhar (2014) Evolution of Surface Roughness During Electropolishing. In: TRIBOLOGY LETTERS, 55 (1). pp. 93-101.

Phanikumar, G and Dutta, P and Chattopadhyay, K (2005) Continuous welding of Cu-Ni dissimilar couple using $CO_{2}$ laser. In: Science and Technology of Welding and Joining, 10 (2). pp. 158-166.

Phanikumar, G and Chattopadhyay, K and Dutta, P (2011) Joining of dissimilar metals: issues and modelling techniques. In: Science and Technology of Welding & Joining, 16 (4). pp. 313-317.

Phanikumar, G and Chattopadhyay, K and Dutta, P (2000) Supercomputing applications in materials engineering. In: Current Science, 78 (7). pp. 847-849.

Phanikumar, Gandham and Dutta, Pradip and Galun, Rolf and Chattopadhyay, Kamanio (2004) Microstructural evolution during remelting of laser surface alloyed hyper-monotectic Al–Bi alloy. In: Materials Science and Engineering: A, 371 (1-2). pp. 91-102.

Pilli, SC and Mruthyunjaya, TS (2004) Whole arm manipulation using closed and hybrid planar chains: A kinematic study. In: 11th World Congress in Mechanism and Machine Science, APR 01-04, 2004, Tianjin, PEOPLES R CHINA.

Podugu, Pakeeruraju and Ananthasuresh, GK (2012) Topology optimization-based design of a compliant aircraft compliant aircraft wing for morphing leading and trailing edges. In: ASME International Mechanical Engineering Congress and Exposition (IMECE), NOV 12-18, 2010, Vancouver, CANADA, pp. 1099-1107.

Pollayi, Hemaraju and Harursampath, Dineshkumar and Yu, Wenbin (2013) Evaluation of strength of component-laminates in strip-based mechanisms. In: Composite Structures, 100 . pp. 1-16.

Potnis, Prashant and Holtzinger, Jennifer and Das, Dipak and Jayaram, Vikram and Biswas, SK (2009) Study of fracture behaviour of bond coats on nickel superalloy by three-point bending of microbeams. In: Surface and Coatings Technology, 204 (5). pp. 586-592.

Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2009) Correlating The Features Of Topography To Friction By Sliding Experiments. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa, Israel, pp. 361-364.

Pottirayil, Anirudhan and Kailas, Satish V and Biswas, SK (2010) Experimental estimation of friction force in lubricated cutting of steel. In: Wear, 269 (7-8). pp. 557-564.

Pottirayil, Anirudhan and Kailas, Satish V and Biswas, SK (2011) Lubricity of an oil in water emulsion in metal cutting: The effect of hydrophilic/lypophilic balance of emulsifiers. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 384 (1-3). pp. 323-330.

Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2010) A parameter characterizing plowing nature of surfaces close to Gaussian. In: Tribology International, 43 (1-2). pp. 370-380.

Pradeep Kumar, AS and Udipi, Shrinivasa (2006) Extending lagrange interpolation to develop a 4-node quadrilateral element. In: 8th Biennial Conference on Engineering Systems Design and Analysis, Jul 04-07, 2006, Turin, Italy, pp. 879-887.

Prakasan, K and Palaniappan, S and Seshan, S (1997) Thermal expansion characteristics of cast Cu based metal matrix composites. In: Composites Part A, 28A (12). pp. 1019-1022.

Prakasan, K and Seshan, S (1997) Electrical conductivity of squeeze cast copper. In: Journal of Materials Science Letters, 16 (19). pp. 1588-1589.

Prakasan, Kalakkath and Seshan, Sambasivam (1999) Microstructure and properties of squeeze cast Cu-carbon fibre metal matrix composite. In: Journal of Materials Science (full set), 34 (20). pp. 5045-5049.

Prakash, Raghu V and Sunder, R (1993) Fatigue Life Under Random Load History Derived From Exceedance Curves Using Different Algorithms. In: Fatigue & Fracture of Engineering Materials & Structures, 16 (7). pp. 707-721.

Prakash, Jose M and Mattern, A and Prasad, Madhu and Ram, Sant and Subramanya, * and Srinivasan, K (2000) Adsorption parameters of activated charcoal from desorption studies. In: Carbon, 38 (8). pp. 1163-1168.

Prakash, Jose M and Prasad, Madhu and Rastogi, SC and Akkimaradi, BS and Gupta, PP and Narayanamurthy, H and Srinivasan, K (2000) Development of a laboratory model of activated charcoal-nitrogen adsorption cryocooler. In: Cryogenics, 40 (7). pp. 481-488.

Prakash, Jose M and Prasad, Madhu and Srinivasan, K (2000) Modeling of thermal conductivity of charcoal–nitrogen adsorption beds. In: Carbon, 38 (6). pp. 907-913.

Prakash, Vijay S and Sonti, Venkata R (2013) Asymptotic expansions for the structural wavenumbers of isotropic and orthotropic fluid-filled circular cylindrical shells in the intermediate frequency range. In: Journal of Sound and Vibration, 332 (16). pp. 3696-3705.

Prakash, Vijay S and Sonti, Venkata R (2014) Asymptotic expansions for wavenumbers in orthotropic fluid-filled circular cylindrical shells for intermediate fluid loading. In: JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 135 (6). pp. 3198-3208.

Prakash, Vivek N and Sreenivas, KR and Arakeri, Jaywant H (2008) High Rayleigh Number High Prandtl Number Natural Convection mimicking Mantle Convection. In: 7th Euromech Fluid Mechanics Conference, University of Manchester, U.K., Manchester.

Prakash, Vivek N and Sreenivas, KR and Arakeri, Jaywant H (2008) Planform Plume Structures in High Rayleigh Number High Prandtl Number Natural Convection. In: 12th Asian Congress of Fluid Mechanics, Daejeon, Korea, Daejeon.

Prasad, BVSSV and Ravikrishna, RV (2012) Comparison of Jatropha Methyl Esther and diesel non-evaporating sprays. In: 12th International Conference on Liquid Atomization and Spray Systems, September 2-6, 2012, Heidelberg, Germany.

Prasad, BVVSU and Sharma, CS and Anand, TNC and Ravikrishna, RV (2011) High swirl-inducing piston bowls in small diesel engines for emission reduction. In: Applied Energy, 88 (7). pp. 2355-2367.

Prasad, CR and Inamdar, AK and Venkatesh, P (1987) Computation of Diffuse Solar Radiation. In: Solar Energy, 39 (6). pp. 521-532.

Prasad, CR and Nirmala, KA and Venkatesh, Prabha (1985) Measurement of sensitivities for the thermal recording of laser beams. In: Optics & Laser Technology, 17 (6). 297 -302.

Prasad, CR and Sathyanarayan, SRC (1979) Studies in biogas technology. Part III. Thermal analysis of biogas plants. In: Sadhana - Academy Proceedings in Engineering Sciences, 2 (3). pp. 377-386.

Prasad, CR and Venkatesh, P (1982) Sequence generator for periodic sampling of transient phenomena. In: Journal of Physics E - Scientific Instruments, 15 (9). pp. 919-922.

Prasad, CR and Yoganarasimha, A and Venkateshan, SP (1979) Device for reusing damaged laser mirrors. In: Review of Scientific Instruments, 50 (2). pp. 262-263.

Prasad, CR and Yoganarasimha, A and Venkateshan, SP and Nagaraju, TG (1979) Technique for measuring the beam shape of pulsed lasers. In: Review of Scientific Instruments, 50 (9). pp. 1161-1162.

Prasad, M and Akkimardi, BS and Rastogi, SC and Rao, RR and Srinivasan, K (1996) Adsorption Characteristics of The Charcoal-Nitrogen System at 79-320 K And Pressures To 5 MPa. In: Carbon, 34 (11). pp. 1401-1406.

Prasad, Madhu and Akkimaradi, BS and Rastogi, SC and Rao, Radhika Rani and Srinivasan, K (1999) Heats of adsorption for charcoal nitrogen systems. In: Carbon, 37 (10). pp. 1641-1642.

Prasad, PBN and Simha, KRY (2004) Disc analogy for approaching circular arc cracks. In: International Journal of Fracture, 125 (1-2). 51 -71.

Prasad, PBN and Simha, KRY (2002) Interactions of interfacial arc cracks. In: International Journal of Fracture, 117 (1). pp. 39-62.

Prasad, PBN and Simha, KRY (2003) Interface crack around circular inclusion: SIF, kinking, debonding energetics. In: Engineering Fracture Mechanics, 70 (2). pp. 285-307.

Prasad, PBN and Simha, KRY (2002) Energy released during arc crack propagation. In: International Journal of Fracture, 116 (1). L3-L8 .

Pratap, Rudra and Pandey, Ashok Kumar (2008) Compact modeling of inertial and rarefaction effects on quality factor of MEMS torsional structures in continuum to molecular flows under low operating frequencies. In: MEMS/MOEMS Components and Their Applications V. Special Focus Topics: Transducers at the Micro-Nano Interface, Monday 21 January 2008, San Jose, CA, USA.

Pratap, Rudra (2008) Ultrasound MEMS transducers: Design and Development. In: Seventeenth National Symposium on Ultrasonics, BHU Varanasi, India, BHU Varanasi.

Pratap, Rudra and Arunkumar, A (2007) Material selection for MEMS devices. In: Indian Journal of Pure and Applied Physics, 45 (4). pp. 358-367.

Pratap, Rudra and Mohite, Suhas and Pandey, Ashok K (2007) Squeeze Film Effects in MEMS Devices. In: Journal of the Indian Institute of Science, 87 (1). pp. 75-94.

Prathima, N and Harini, A and Rai, Neeraj and Chandrashekara, RH and Ayappa, KG and Sampath, S and Biswas, SK (2005) Thermal Study of Accumulation of Conformational Disorders in the Self-Assembled Monolayers of C-8 and C-18 Alkanethiols on the Au(111) Surface. In: Langmuir, 21 (6). pp. 2364-2374.

Praveena, Manimunda and Bain, Colin D and Jayaram, Vikram and Biswas, Sanjay K (2013) Total internal reflection (TIR) Raman tribometer: a new tool for in situ study of friction-induced material transfer. In: RSC ADVANCES, 3 (16). pp. 5401-5411.

Praveena, Manimunda and Guha, Kaustav and Ravishankar, Abhilash and Biswas, Sanjay K and Bain, Colin D and Jayaram, Vikram (2014) Total internal reflection Raman spectroscopy of poly(alpha-olefin) oils in a lubricated contact. In: RSC ADVANCES, 4 (42). pp. 22205-22213.

Praveena, Manimunda and Jayaram, Vikram and Biswas, Sanjay K (2012) Friction between a Steel Ball and a Steel Flat Lubricated by MoS2 Particles Suspended in Hexadecane at 150 degrees C. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 51 (38). pp. 12321-12328.

Puthenveettil, Baburaj A and Ananthakrishna, G and Arakeri, Jaywant H (2005) The Multifractal Nature of Plume Structure in High-Rayleigh-Number Convection. In: Journal of Fluid Mechanics, 526 . pp. 245-256.

Puthenveettil, Baburaj A and Arakeri, Jaywant H (2008) Convection due to an unstable density difference across a permeable membrane. In: Journal of Fluid Mechanics, 609 . pp. 139-170.

Puthenveettil, Baburaj A and Arakeri, Jaywant H (2004) Flux scaling and plume structure in high Ra - high Sc turbulent convection. In: Proceedings of the Tenth Asian Congress of Fluid Mechanics, 17--21, May 2004, Peradeniya, Srilanka.

Puthenveettil, Baburaj A and Arakeri, Jaywant H (2004) Integral analysis of laminar indirect free convection boundary layers with weak blowing for Schmidt no. ~ 1. In: International Communications I Heat and Mass Transfer, 31 (8). pp. 1199-1208.

Puthenveettil, Baburaj A and Arakeri, Jaywant H (2005) Plume structure in high Rayleigh number convection. [Preprint]

Puthenveettil, Baburaj A and Arakeri, Jaywanth H (2005) Plume structure in high-Rayleigh-number convection. In: Journal of Fluid Mechanics, 542 . 217 -249.

Puthenveettil, Baburaj A and Gunasegarane, GS and Agrawal, Yogesh K and Schmeling, Daniel and Bosbach, Johannes and Arakeri, Jaywant H (2011) Length of near-wall plumes in turbulent convection. In: Journal of Fluid Mechanics, 685 . pp. 335-364.

Q

Quadros, WR and Gurumoorthy, B and Ramaswami, K and Prinz, FB (2001) Skeletons for Representation and Reasoning in Engineering Applications. In: Engineering with Computers, 17 (2). pp. 186-198.

Quadros, WR and Ramaswami, K and Prinz, FB and Gurumoorthy, B (2004) LayTracks: a new approach to automated geometry adaptive quadrilateral mesh generation using medial axis transform. In: International Journal for Numerical Methods in Engineering, 61 . pp. 209-237.

R

Raghavan, MR and Nagendra, HR (1979) A study on bullock carts. Part 1. Engineering analysis of the two-wheel bullock cart design. In: Sadhana, 2 (4). pp. 435-449.

Raghavan, MR and Rao, DL Prasanna (1979) A study on bullock carts. Part 2. Experimental study of forces in a bullock cart. In: Sadhana, 2 (4). pp. 451-471.

Raghavana, MR and Jayachandran, R (1989) Analysis of the performance characteristics of a two-inertia power transmission system with a plate clutch. In: Mechanism and Machine Theory, 24 (6). pp. 499-503.

Raj, PM and Sarkar, S and Chakraborty, S and Dutta, P (2001) Three-dimensional computational modelling of momentum, heat and mass transfer in laser surface alloying with distributed melting of alloying element. In: International Journal of Numerical Methods for Heat and Fluid Flow, 11 (5-6). pp. 576-599.

Raj, Arul K and Karthikeyan, M and Alphonsa, J and Satish, V K and Venugopal, S (2013) WEAR AND SLIDING-FRICTION CHARACTERISTICS OF STAINLESS STEEL SS316LN WITHOUT A COATING AND WITH A CrN COATING AT ELEVATED TEMPERATURES AND IN A VACUUM. In: METALLURGIST, 57 (7-8). pp. 727-735.

Raj, Mohan P and Sarkar, S and Chakraborty, S and Phanikumar, G and Dutta, P and Chattopadhyay, K (2002) Modelling of transport phenomena in laser surface alloying with distributed species mass source. In: International Journal of Heat and Fluid Flow, 23 (3). pp. 298-307.

Rajanbabu, N and Chatterjee, Anindya and Menon, AG (2007) Motional coherence during resonance ejection of ions from Paul traps. In: International Journal of Mass Spectrometry, 261 (2-3). pp. 159-169.

Rajanbabu, N and Marathe, Amol and Chatterjee, Anindya and Menon, AG (2007) Multiple scales analysis of early and delayed boundary ejection in Paul traps. In: International journal of Mass Spectrometry, 261 (2-3). pp. 170-182.

Rajendrakumar, PK and Biswas, SK (1997) Deformation due to contact between a two-dimensional rough surface and a smooth cylinder. In: Tribology Letters, 3 (4). pp. 297-301.

Rajendrakumar, PK and Biswas, SK (1996) Elastic Contact Between a Cylindrical Surface and a Flat Surface - A non-Hertzian Model of Multi-asperity Contact. In: Mechanics Research Communications, 23 (4). pp. 367-380.

Rajendran, S and Narasimhan, MV (1994) An accelerated subspace iteration method. In: International Journal for Numerical Methods in Engineering, 37 (1). 141 -153.

Rajendran, S and Narasimhan, MV (1997) Effect of inertia variation due to reciprocating parts and connecting rod on coupled free vibration of crankshaft. In: Journal of Engineering for Gas Turbines and Power, 119 (1). pp. 257-263.

Rajendran, S and Raghavan, MR and Narasimhan, MV (1995) Improving the convergence rate of the inverse iteration method. In: Computers & Structures, 55 (4). pp. 709-715.

Raju, Srinivasa K and Kumar, Nagesh D (2010) Multicriterion Analysis in Engineering and Management. PHI Learning Pvt. Ltd., New Delhi, India,. ISBN 978-81-203-3976-7

Rakesh, N and Mruthyunjaya, TS and Girish, GD (1984) Velocity and acceleration analysis of complex mechanisms by graphical iteration. In: Mechanism and Machine Theory, 19 (3). pp. 349-356.

Rakshit, Sourav and Ananthasuresh, GK (2006) Simultaneous Geometry Optimization and Material Selection for Truss Structures. In: CD-ROM Proceedings of the ASME International Design Engineering and Technical Conferences, September 10–13 2006, Philadelphia, USA.

Rakshit, Sourav and Ananthasuresh, GK (2008) Simultaneous material selection and geometry design of statically determinate trusses using continuous optimization. In: Structural and Multidisciplinary Optimization, 35 (1). pp. 55-68.

Rakshit, Sourav and Ananthasuresh, GK (2008) An amino acid map of inter-residue contact energies using metric multi-dimensional scaling. In: Journal of Theoretical Biology, 250 (2). pp. 291-299.

Rakshit, Sourav and Ananthasuresh, GK (2010) A novel approach for large-scale polypeptide folding based on elastic networks using continuous optimization. In: Journal of Theoretical Biology, 262 (3). pp. 488-497.

Ramadurgam, Sarath and Chakravarthy, RVK and Tomar, Gaurav and Govindarajan, Rama (2012) Stability of developing film flow down an inclined surface. In: PHYSICS OF FLUIDS, 24 (10).

Ramakrishna, K and Sen, Dibakar (2014) Curvature based mobility analysis and form closure of smooth planar curves with multiple contacts. In: MECHANISM AND MACHINE THEORY, 75 . pp. 131-149.

Ramanathan, M and Gurumoorthy, B (2003) Constructing medial axis transform of planar domains with curved boundaries. In: Computer-Aided Design, 35 (7). pp. 619-632.

Ramanathan, M and Gurumoorthy, B (2010) Interior Medial Axis Transform computation of 3D objects bound by free-form surfaces. In: Computer-Aided Design, 42 (12). pp. 1217-1231.

Ramanathan, M and Gurumoorthy, B (2005) A Tracing Algorithm for Constructing Medial Axis Transform of 3D Objects Bound by Free-form Surfaces. In: International Conference on Shape Modeling and Applications, 13-17 June, Cambridge,USA, pp. 226-235.

Ramarajan, S and Rao, SN (1972) Absolute Stability of NLTV Discrete Systems. In: IEEE Transactions on Automatic Control, 17 (1). pp. 139-141.

Ramarajan, S and Rao, SN (1970) Class of linear time-varying discrete systems. In: Electronics Letters, 6 (22). pp. 701-702.

Ramarajan, S and Rao, SN (1971) An Improved Stability Criterion for the Damped Mathieu Equation. In: IEEE Transactions on Automatic Control, 16 (4). pp. 363-364.

Ramasesha, Sheela K and Srikari, Tantri P and Jayasingh, Moses E and Biswas, SK (2000) Effect of densification and TiB2 reinforcement on the wear of molybdenum disilicide. In: Tribology Letters, 8 (4). pp. 219-222.

Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Micro and macro contact mechanics for interacting asperities. In: Sadhana, 33 (3). pp. 329-338.

Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Axisymmetric fretting analysis in coated cylinder. In: Sadhana, 33 (3). pp. 299-327.

Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Near surface stress analysis strategies for axisymmetric fretting. In: Sadhana, 33 (3). pp. 273-297.

Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Wave propagation in coated cylinders with reference to fretting fatigue. In: Sadhana, 33 (3). pp. 339-356.

Ramesh, M and Simha, KRY (2008) Cylindrical crack vis a vis parallel crack pair: shielding, energetics and asymptotics. In: International Journal Of Fracture, 152 (2). pp. 75-95.

Ramesh, M and Simha, KRY and Kailas, Satish V (2006) High Frequency Fretting Fatigue in Cylinders. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Ramu, G and Ananthasuresh, GK (2009) A Flexure-based Deployable Stereo Vision Mechanism and Temperature and Force Sensors for Laparoscopic Tools. In: 14th National Conference on Machines and Mechanisms (NaCoMM-09), December 17-18, 2009, NIT-Durgapur, India.

Ramulu, Janaki P and Narayanan, Ganesh R and Kailas, Satish V and Reddy, Jayachandra (2013) Internal defect and process parameter analysis during friction stir welding of Al 6061 sheets. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 65 (9-12). pp. 1515-1528.

Ramulu, Perumalla Janaki and Kailas, Satish V and Narayanan, Ganesh R (2013) Influence of tool rotation speed and feed rate on the forming limit of friction stir welded AA6061-T6 sheets. In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 227 (C3). pp. 520-541.

Ramulu, Perumalla Janaki and Narayanan, Ganesh R and Kailas, Satish V (2013) Forming limit investigation of friction stir welded sheets: influence of shoulder diameter and plunge depth. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 69 (9-12). pp. 2757-2772.

Rana, Moumita and Bharathanatha, RR and Gautam, Ujjal K (2014) Kinetically stabilized C-60-toluene solvate nanostructures with a discrete absorption edge enabling supramolecular topotactic molecular exchange. In: CARBON, 74 . pp. 44-53.

Ranade, VV and Joshi, JB and Marathe, AG (1989) Flow Generated By Pitched Blade Turbines Ii: Simulation Using Κ-Ε Model. In: Chemical Engineering Communications, 81 . pp. 225-248.

Rangacharyulu, MAV and Srinivasan, P (1973) Approximate Analysis Of Nonlinear Spring Mass Systems Subjected To Step Function Excitation. In: Journal Of The Indian Institute Of Science, 55 (1). pp. 41-50.

Rangacharyulu, MAV and Dasarath, BV (1975) Non-linear systems with quadratic and cubic damping - an analytical approach. In: Journal of Sound and Vibration, 38 (1). pp. 9-13.

Rangacharyulu, MAV and Srinivasan, P (1973) A note on the period of oscillation of non-linear systems. In: Journal of Sound and Vibration, 29 (2). 207 -213.

Rangacharyulu, MAV and Srinivasan, P and Dasarathy, BV (1974) Approximate analysis of coupled non-linear non-conservative systems subjected to step-function excitation. In: Journal of Sound and Vibration, 37 (3). pp. 359-366.

Rangacharyulu, MAV and Srinivasan, P and Dasarathy, BV (1974) Transient response of coupled non-linear non-conservative systems. In: Journal of Sound and Vibration, 37 (4). pp. 467-473.

Ranganath, R and Nair, PS and Mruthyunjaya, TS and Ghosal, A (2004) A force–torque sensor based on a Stewart Platform in a near-singular configuration. In: Mechanism and Machine Theory, 39 (9). pp. 971-998.

Ranganatha, S and Kailas, Satish V and Støren, Sigurd and Srivatsan, TS (2008) Role of temperature on sliding response of aluminum on steel of a hot extrusion. In: Materials and Manufacturing Processes, 23 (1). pp. 29-36.

Ranganatha, S and Kailas, Satish V (2006) Estimation of shear force and morphology of wear track, while sliding hard spherical indenter on soft plate and comparing with experimental results. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Ranganatha, S and Venkatesha, TV and Vathsala, K (2012) Development of high performance electroless Ni-P-HNT composite coatings. In: APPLIED SURFACE SCIENCE, 263 . pp. 149-156.

Ranganatha, S and Venkatesha, TV and Vathsala, K (2012) Electroless Ni-W-P Coating and Its Nano-WS2 Composite: Preparation and Properties. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 51 (23). pp. 7932-7940.

Ranganatha, S and Venkatesha, TV and Vathsala, K (2012) Process and properties of electroless Ni-Cu-P-ZrO2 nanocomposite coatings. In: Materials Research Bulletin, 47 (3). pp. 635-645.

Ranganatha, S and Venkatesha, TV and Vathsala, K and kumar , MKP (2012) Electrochemical studies on Zn/nano-CeO 2 electrodeposited composite coatings. In: Surface and Coatings Technology, 208 . pp. 64-72.

Rangaswami, K and Hariharan, R (1975) An absolute digital positioning numerical control system. In: International Journal of Electronics, 38 (2). 233 -239.

Rani, MR and Seshan, S (1996) Abrasive Jet Machining - Process variables and current applications. In: Metals Materials and Processes, 7 (4). pp. 279-289.

Rani, RM and Seshan, S (1998) Studies on abrasive jet machining through statistical design of experiments. In: Experimental Techniques, 22 (02). pp. 28-30.

Ranjan, BSC and Vikranth, HN and Ghosal, Ashitava (2013) A Novel Prevailing Torque Threaded Fastener and Its Analysis. In: JOURNAL OF MECHANICAL DESIGN, 135 (10).

Ranjith, K and Narasimhan, R (1986) Asymptotic and finite element analyses of mode III dynamic crack growth at a ductile-brittle interface. In: International Journal of Fracture, 76 (1). pp. 61-77.

Ranjith, K and Narasimhan, R (1996) Asymptotic and finite element analyses of mode III dynamic crack growth at a ductile-brittle interface. In: International Journal of Fracture, 76 (1). pp. 61-77.

Ranjith, K and Narasimhan, R (1997) Asymptotic fields for dynamic crack growth at a ductile-brittle interface. In: Journal of the Mechanics and Physics of Solids, 45 (1). pp. 67-85.

Ransing, RS and Srinivasan, MN and Lewis, RW (1995) ICADA: Intelligent computer aided defect analysis for castings. In: Journal of Intelligent Manufacturing, 6 (1). pp. 29-40.

Rao, Nalluri SRP and Vani, V and Gurumoorthy, B (1995) A 3D-clipping algorithm for form feature volume extraction. In: Proceedings of the 3rd International Conference, Computer Integrated Manufacturing, 11-14 July 1995, Singapore, pp. 385-393.

Rao, Narasimha KV and Narasimham, CSVL and Murthy, Krishna MV (1993) Parametric study on the bulk hydraircooling of spherical food products. In: AIChE Journal, 39 (11). pp. 1870-1884.

Rao, A and Arakeri, JH (2001) Wave structure in the radial film flow with a circular hydraulic jump. In: Experiments in Fluids, 31 (5). pp. 542-549.

Rao, Arun R and Shrinivasa, U (2002) Towards simulation of elasto-plastic deformation: An investigation. In: Sadhana, 27 . pp. 251-294.

Rao, Madhusudhana G and Narasimham, GSVL (2007) Laminar conjugate mixed convection in a vertical channel with heat generating components. In: International Journal of Heat and Mass Transfer, 50 (17-18). pp. 3561-3574.

Rao, Mallikarjuna K and Shrinivasa, U (2001) A set of pathological tests to validate new finite elements. In: Sadhana, 26 (6). pp. 549-590.

Rao, Mohan G and Mohan, S and Panchapagesan, TS and Balasubramanian, TV (1992) Microstructure and composition analysis of $Cu-Cu_20$ cermet films deposited by d.c. reactive magnetron sputtering. In: Thin Solid Films, 207 (1-2). pp. 29-32.

Rao, Nalluri SRP and Gurumoorthy, B (1993) Knowledge-based gluing operators for feature-based modelling. In: Computers in Industry, 23 (1-2). pp. 129-138.

Rao, Narasimha KV and Narasimham, GSVL and Murthy, Krishna MV (1993) Analysis of heat and mass transfer during bulk hydraircooling of spherical food products. In: International Journal of Heat and Mass Transfer, 36 (3). pp. 809-822.

Rao, Narasimha KV and Narasimham, GSVL and Murthy, Krishna MV (1992) Analysis of co-current hydraircooling of food products in bulk. In: International Journal of Heat and Fluid Flow, 13 (3). pp. 300-310.

Rao, RR and Prasad, M and Bindagi, SV and Srinivasan, K (1997) Effect of packing density on performance of charcoal-nitrogen adsorption cryocoolers. In: Carbon, 35 (10-11). pp. 1559-1566.

Rao, Radhika Rani and Prasad, Madhu and Srinivasan, Kandadai (2005) Optimum operating conditions for an adsorption cryocooler: a case of activated carbon + nitrogen system. In: Cryogenics, 45 (3). pp. 193-197.

Rao, Radhika Rani and Srinivasan, K (1997) Exergy Diagrams for Nitrogen on ITS-90. In: International Journal of Energy Research, 21 (11). pp. 1053-1059.

Rao, Ramananda R and Shrinivasa, U and Srinivasan, J (1991) Synthesis of Cost-Optimal Shell-and-Tube Heat Exchangers. In: Heat Transfer Engineering, 12 (3). 47 -55.

Rao, SN and Mohamedsanaullah, AG (1978) Analysis and Design of Cushioning in Hydraulic Cylinders. In: Journal of the Indian Institute of Science, 60 (7). 271-282 .

Rao, SN and Srinath, MD (1965) Stability of control systems with time delay. In: Electronics Letters , 1 (8). p. 219.

Rao, TR Raghavendra and Biswas, SK (1979) Experimental investigation of die wear in small-batch hammer-forging under unlubricated conditions. In: Journal of Mechanical Working Technology, 3 (2). pp. 137-150.

Rao, VK (1978) A note on turbulent swirling flows. In: AIAA Journal, 16 (4). pp. 409-411.

Rao, VM and Ananthasuresh, GK (2009) Haptic Feedback for Injecting Biological Cells using Miniature Compliant Mechanisms. In: 14th National Conference on Machines and Mechanisms (NaCoMM-09), December 17-18, 2009, NIT-Durgapur, India.

Rao Bapat, VAchyuta and Srinivasana, P (1968) Response spectrum of non-linear spring mass system subjected to transient disturbances. In: Journal of Sound and Vibration, 8 (3). pp. 482-487.

Rathnasamy, R and Arakeri, JH and Srinivasan, K (2005) Experimental investigation of fluid flow in long rectangular micro-channels. In: Proceedings of the institution of Mechanical Engineers Part E-Journal of Process Mechnical Engineering, 219 (E3). pp. 227-235.

Rathnasamy, R and Arakeri, JH and Srinivasan, K (2005) Experimental investigation of forced convective heat transfer to air, liquids, and liquid mixtures in a long narrow channel. In: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (4). pp. 311-317.

Ravi, B and Srinivasan, MN (1990) Computer aided parting surface generation. In: Proceedings of Manufacturing International '90, 25-28 March 1990, Atlanta, GA, USA, pp. 125-129.

Ravi, B and Srinivasan, MN (1990) Decision criteria for computer-aided parting surface design. In: Computer-Aided Design, 22 (1). pp. 11-18.

Ravi, B and Srinivasan, MN (1990) Hot spots in castings: computer-aided location and experimental validation. In: Transactions of the American Foundrymen's Society, 98 . pp. 353-357.

Ravi, VC and Rakshit, Subrata and Ghosal, Ashitava (2010) Redundancy resolution using tractrix -- Simulations and Experiments. In: ASME Journal of Mechanisms and Robotics, 2 (3). 031013-1.

Ravikiran, A and Bai, Pramila BN (1995) Influence of Speed on the Tribochemical Reaction Products and the Associated Transitions for the Dry Sliding of Silicon Nitride against Steel. In: Journal of the American Ceramic Society, 78 (11). pp. 3025-3032.

Ravikiran, A and Bai, Pramila BN (1993) High speed sliding of $Al_2O_3$ pins against an En-24 steel disc. In: Wear, 162-16 (1). pp. 296-304.

Ravikiran, A and Bai, Pramila BN (1995) Observations on the role of the steel disc counterface during the sliding of various structural ceramics. In: Wear, 181 (part 2). pp. 544-550.

Ravikiran, A and Bai, Pramila BN (1995) Sliding wear of YTZP ceramic against steel: observations on ceramic transfer and wear transition. In: Journal of Materials Science (full set), 30 (8). pp. 1999-2007.

Ravikiran, A and Bai, Pramila BN (1994) Water-lubricated sliding of $Al_2O_3$ against steel. In: Wear, 171 (1-2). pp. 33-39.

Ravikiran, A and Jayaram, V and Biswas, SK (1997) Sliding wear of Al2O3-SiC-(Al,Si) composites against a steel counterface. In: Journal of the American Ceramic Society, 80 (1). pp. 219-224.

Ravikiran, A and Nagarajan, VS and Biswas, SK and Bai, Pramila BN (1995) Effect of Speed and Pressure on Dry Sliding Interactions of Alumina against Steel. In: Journal of the American Ceramic Society, 78 (2). 356-364 .

Ravikiran, A and Natarajan, KN and Biswas, SK and Bai, Pramila BN (1990) Erosion studies on hyper steel and high chrome cast iron. In: Wear, 141 (1). pp. 85-94.

Ravikiran, A and Subbanna, GR and Bai, Pramila BN (1996) Effect of interface layers formed during dry sliding of zirconia toughened alumina (ZTA) and monolithic alumina against steel. In: Wear, 192 (1-2). pp. 56-65.

Ravikrishna, RV and Naik, Sameer V and Cooper, CS and Laurendeau, Normand M (2004) Quantitative Laser-Induced Fluorescence Measurements and Modeling of Nitric Oxide in High-Pressure (6-15 atm) Counterflow Diffusion Flames. In: Combustion Science and Technology, 176 (1). pp. 1-21.

Ravikrishna, RV (2007) Reacting Flow Simulations with Detailed Chemistry: Applications in IC Engines & Gas Turbines. In: Seventh Asian CFD Conference, , 2007, Bangalore, India.

Ravikrishna, RV and Laurendeau, NM (2003) Evaluation of nitric oxide kinetics in high-pressure flames (up to 5 atm). In: Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 217 (5). pp. 529-536.

Ravindran, K (1994) Finite element study on the role of convection in laser surface melting. In: Numerical Heat Transfer Part A: Applications, 26 (5). pp. 601-618.

Ravindran, K and Srinivasan, J and Marathe, AG (1995) Role of surface tension driven convection in pulsed - laser melting and solidification. In: Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture, 209 (1). pp. 75-82.

Ravindran, K. and Srinivasan, J and Marathe, AG (1995) Finite Element Solution Of Surface-Tension Driven Flows In Laser Surface-Melting. In: Mechanics Research Communications, 22 (3). pp. 297-304.

Ravisankar, R and Mruthyunjaya, TS (1985) Computerized synthesis of the structure of geared kinematic chains. In: Mechanism and Machine Theory, 20 (5). pp. 367-387.

Ravishankar, AS and Ghosal, Ashitava (1999) Nonlinear dynamics and chaotic motions in feedback-controlled two- and three-degree-of-freedom robots. In: The International Journal of Robotics Research, 18 (1). pp. 93-108.

Ravishankar, S and Dutt, HNV and Gurumoorthy, B (2012) AIWIN - A fast and jigless inspection technique for machined parts. In: International Journal of Advanced Manufacturing Technology, 62 (1-4). pp. 231-240.

Ravishankar, S and Dutt, HNV and Gurumoorthy, B (2010) Automated inspection of aircraft parts using a modified ICP algorithm. In: The International Journal of Advanced Manufacturing Technology, 46 (1-4). pp. 227-236.

Raya, Subhashis and Srinivasan, J (1992) Analysis of conjugate laminar mixed convection cooling in a shrouded array of electronic components. In: International Journal of Heat and Mass Transfer, 35 (4). pp. 815-822.

Reddy, KS and Khan, RH and Murthy, KSS (1979) Application of Ultrasonics in Determining the Structural and Mechanical Properties of Cast Iron. In: Transactions of the Indian Institute of Metals, 32 (4). pp. 337-343.

Reddy, PV and Murthy, Srinivasa N (1987) Some observations on cold casting of Araldite sheets for photoelastic analysis. In: Journal of Indian Institute of Science, 67 (3-4). pp. 115-118.

Reddy, A Narayana and Ananthasuresh, GK (2008) On computing the forces from the noisy displacement data of an elastic body. In: International Journal For Numerical Methods In Engineering, 76 (11). pp. 1645-1677.

Reddy, Annem Narayana and Maheshwari, Nandan and Sahu, Deepak Kumar and Ananthasuresh, GK (2010) Miniature Compliant Grippers With Vision-Based Force Sensing. In: IEEE Transactions on Robotics, 26 (5). pp. 867-877.

Reddy, BSY and Simha, KRY and Ghosal, A (1999) Free vibration of a kinked cantilever with attached masses. In: Journal of The Acoustical Society of America, 105 (1). pp. 164-173.

Reddy, Bhupal and Bhattacharya, P and Singh, Bawa and Chattopadhyay, K (2009) The effect of ball milling on the melting behavior of Sn-Cu-Ag eutectic alloy. In: Journal of Materials Science, 44 (9). pp. 2257-2263.

Reddy, CK and Pratap, R (2000) Can a passive hopper hop forever? In: Current Science, 79 (5). pp. 639-645.

Reddy, CK and Pratap, R (2000) Equivalent Viscous Damping for A Bilinear Hysteretic Oscillator. In: Journal of Engineering Mechanics-ASCE, 126 (11). pp. 1189-1196.

Reddy, CK and Pratap, R (2003) Multimodal map and complex basin of attraction of a simple hopper. In: Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 68 (1). pp. 16220-8.

Reddy, CK and Pratap, R (2001) A Passive Hopper With Lossless Collisions. In: IUTAM Symposium on Nonlinearity and Stochastic Structural Dynamics, 85 . pp. 209-220.

Reddy, Narayana A and Ananthasuresh, GK (2012) A numerical approach to determine the sufficiency of given boundary data sets for uniquely estimating interior elastic properties. In: Inverse Problems in Science and Engineering, 20 (7). pp. 1057-1077.

Reddy, Somi A and Bai, Pramila BN and Murthy, KSS and Biswas, SK (1995) Mechanism of seizure of aluminium-silicon alloys dry sliding against steel. In: Wear, 181 (part 2). pp. 658-667.

Reddy, Somi A and Bai, Pramila BN and Murthy, KSS and Biswas, SK (1994) Wear and seizure of binary Al---Si alloys. In: Wear, 171 (1-2). pp. 115-127.

Reddy, Venkata P and Narasimham, GSVL and Rao, Raghurama SV and Johny, T and Kasiviswanathan, KV (2010) Non-Boussinesq conjugate natural convection in a vertical annulus. In: International Communications in Heat and Mass Transfer, 37 (9). pp. 1230-1237.

Rohatgi, PK and Bhutani, AK and Abraham, KP (1979) Directional solidification of aluminum-nickel eutectic alloys using electroslag remelting. In: Metallurgical Transactions. Physical Metallurgy and Material, 10 (3). pp. 333-342.

Rohatgi, PK and Pai, BC (1974) Effect of microstructure and mechanical properties on the seizure resistance of cast aluminium alloys. In: Wear, 28 (3). pp. 353-367.

Rohatgi, PK and Prabhakar, KV (1975) Wrought aluminum-nickel alloys for high strength-high conductivity applications. In: Metallurgical Transactions, 6 (4). pp. 1003-1008.

Rohatgi, PK and Sharma, RC and Prabhakar, KV (1975) Microstructure and mechanical properties of unidirectionally solidified Al-Si-Ni ternary eutectic. In: Metallurgical Transactions, 6 (3). pp. 569-575.

Roy, Deb T (2003) Computational modeling: a path to expand the knowledge base in fusion welding. In: Indian Welding Journal, 36 (3). pp. 59-66.

Roy, Arjun and Chatterjee, Anindya (2009) Vibrations of a Beam in Variable Contact With a Flat Surface. In: Journal of Vibration and Acoustics, 131 (4).

Roy, Arun Y and Narasimhan, R (1999) Constraint effects on ductile fracture processes near a notch tip under mixed-mode loading. In: Engineering Fracture Mechanics, 62 (6). pp. 511-534.

Roy, Arun Y and Narasimhan, R (1999) A finite element investigation of the effect of crack tip constraint on hole growth under mode I and mixed mode loading. In: International Journal of Solids and Structures, 36 (10). pp. 1427-1447.

Roy, Arun Y and Narasimhan, R and Arora, PR (1999) An Experimental Investigation Of Constraint Effects On Mixed Mode Fracture Initiation In A Ductile Aluminium Alloy. In: Acta Materialia, 47 (5). pp. 1587-1596.

Roy, Chowdhury S and Narasimhan, R (2000) A finite element analysis of quasistatic crack growth in a pressure sensitive constrained ductile layer. In: Engineering Fracture Mechanics, 66 (6). pp. 551-571.

Roy, Y Arun and Narasimhan, R (1998) J-Dominance in mixed mode ductile fracture specimens. In: International Journal of Fracture, 88 (03). pp. 259-279.

Roychowdhury, AP and Srinivasan, J (1995) Effect of wall emissivities on radiation heat transfer in glass tank forehearths. In: Warme und Stoffubertragung-Thermo & Fluid Dynamics, 31 (1-2). pp. 11-15.

Rudra, Pratap (2003) Some issues in mechanical design of MEMS transducers. In: SPIE:Smart Materials, Structures, and Systems, 12-14 December, Bangalore, India, Vol.5062, 788-793.

S

SK, Biswas and Kalyani, Vijayan (1992) Friction and wear of PTFE — a review. In: Wear, 158 (1-2). pp. 193-211.

SK, Sinha and SK, Biswas (1992) Friction and wear behaviour of continuous fibre as cast Kevlar-phenolic resin composite. In: Journal of Materials Science, 27 (11). pp. 3085-3091.

Sadashive, Gowada B and Narashimam, GSVL and Krishna Murthy, MV (1998) Time-temperature histories of spherical food products during bulk forced-air precooling. In: JSME international journal. Series B, Fluids and thermal engineering, 41 (04). pp. 895-907.

Sagar, Vidya R and Prasad, Raghu BK and Kumar, Shantha S (2012) An experimental study on cracking evolution in concrete and cement mortar by the b-value analysis of acoustic emission technique. In: CEMENT AND CONCRETE RESEARCH, 42 (8). pp. 1094-1104.

Saha, A and Basu, S and Kumar, R (2012) Levitated droplet evaporation: scaling analysis for equivalence between radiative and convective heating. In: 9th European Fluid Mechanics Conference, September 9-13, 2012, Rome, Italy.

Saha, Abhishek and Basu, Saptarshi and Kumar, Ranganathan (2012) Effects of acoustic-streaming-induced flow in evaporating nanofluid droplets. In: Journal of Fluid Mechanics, 692 . pp. 207-219.

Saha, Abhishek and Basu, Saptarshi and Kumar, Ranganathan (2012) Particle image velocimetry and infrared thermography in a levitated droplet with nanosilica suspensions. In: Experiments in Fluids, 52 (3). pp. 795-807.

Saha, Abhishek and Basu, Saptarshi and Kumar, Ranganathan (2012) Scaling analysis: Equivalence of convective and radiative heating of levitated droplet. In: APPLIED PHYSICS LETTERS, 100 (20).

Saha, Abhishek and Basu, Saptarshi and Kumar, Ranganathan (2012) Thermally induced breakup of levitated droplet. In: 12th International Conference on Liquid Atomization and Spray Systems, September 2-6, 2012, Heidelberg, Germany.

Saha, Abhishek and Basu, Saptarshi and Kumar, Ranganathan (2012) Velocity and rotation measurements in acoustically levitated droplets. In: PHYSICS LETTERS A, 376 (45). pp. 3185-3191.

Saha, Abhishek and Basu, Saptarshi and Suryanarayana, C and Kumar, Ranganathan (2010) Experimental analysis of thermo-physical processes in acoustically levitated heated droplets. In: International Journal of Heat and Mass Transfer, 53 (25-26). pp. 5663-5674.

Saha, Abhishek and Lee, Joshua D and Basu, Saptarshi and Kumar, Ranganathan (2012) Breakup and coalescence characteristics of a hollow cone swirling spray. In: PHYSICS OF FLUIDS, 24 (12).

Saha, BB and El-Sharkawy, II and Chakraborty, A and Koyama, S and Banker, ND and Dutta, P and Prasad, M and Srinivasan, K (2006) Evaluation of minimum desorption temperatures of thermal compressors in adsorption refrigeration cycles. In: International Journal of Refrigeration, 29 (7). pp. 1175-1181.

Saha, Bidyut Baran and Chakraborty, Anutosh and Koyama, Shigeru and Srinivasan, Kandadai and Choon Ng, Kim and Dutta, Pradip (2007) Thermodynamic formalism of minimum heat source temperature for driving advanced adsorption cooling device. In: Applied Physic Letters, 91 (11). 111902-1-111902-3.

Saha, S and Srinivasan, K and Dutta, P and Nayak, KC (2006) Cooling of Electronics using Phase Change Materials and Thermal Conductivity Enhancers. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.

Saha, SK and Dutta, P (2011) Effect of Melt Convection on The Optimum Thermal Design Of Heat Sinks With Phase Change Material. In: Journal of Enhanced Heat Transfer, 18 (3). pp. 249-259.

Saha, SK and Dutta, P (2010) Heat transfer correlations for PCM-based heat sinks with plate fins. In: 12th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, MAY 10-13, 2009 , Rome, pp. 2485-2491.

Saha, SK and Dutta, Pradip (2008) Role of Melt Convection on the Thermal Performance of Heat Sinks with Phase Change Material. In: 10th Electronics Packing Technology Conference, DEC 09-12, 2008, Singapore, Singapore, pp. 539-544.

Saha, SK and Murthy, BB and Dutta, P (2008) Cooling of Electronics using Phase Change Materials under Cyclic Loading. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Saha, SK and Srinivasan, K and Dutta, P (2008) Studies on Optimum Distribution of Fins in Heat Sinks Filled With Phase Change Materials. In: Journal of Heat Transfer, 130 (3). 034505-1-034505-4.

Saha, Sandip K. and Dutta, Pradip (2013) Role of melt convection on optimization of PCM-based heat sink under cyclic heat load. In: Heat Transfer Engineering, 34 (11-12). pp. 950-958.

Saha, Sandip Kumar and Dutta, Pradip (2012) Thermal Management of Electronics Using PCM-Based Heat Sink Subjected to Cyclic Heat Load. In: IEEE Transactions on Components, Packaging, and Manufacturing Technology Part C, 2 (3). pp. 464-473.

Saha, TK and Soundranayagam, S (1996) Performance of a mixed flow pump with varying tip clearance .1. In: Proceedings of the Institution of Mechanical Engineers - Part A: Journal of Power and Energy, 210 (4). pp. 305-318.

Sahasrabudhe, AD and Munjal, ML and Ramu, Anantha S (1995) Analysis of Intertance Due to the Higher Order Mode Effects in a Sudden Area Discontinuity. In: Journal of Sound and Vibration, 185 (3). pp. 515-529.

Sahasrabudhe, AD and Ramu, Anantha S and Munjal, ML (1991) Matrix condensation and transfer matrix techniques in the 3-D analysis of expansion chamber mufflers. In: Journal of Sound and Vibration, 147 (3). pp. 371-394.

Sahoo, Niranjan and Saravanan, S and Jagadeesh, G and Reddy, KPJ (2006) Simultaneous measurement of aerodynamic and heat transfer data for large angle blunt cones in hypersonic shock tunnel. In: Sadhana, 31 (Part 5). pp. 557-581.

Sahoo, RR and Biswas, SK (2014) Effect of Layered MoS2 Nanoparticles on the Frictional Behavior and Microstructure of Lubricating Greases. In: TRIBOLOGY LETTERS, 53 (1). pp. 157-171.

Sahoo, Rashmi R and Biswas, SK (2009) Frictional response of fatty acids on steel. In: Journal of Colloid and Interface Science, 333 (2). pp. 707-7148.

Sahoo, Rashmi R and Biswas, Sanjay K (2010) Deformation and friction of MoS2 particles in liquid suspensions used to lubricate sliding contact. In: Thin Solid Films, 518 (21). pp. 5995-6005.

Sahoo, Rashmi R and Biswas, Sanjay K (2010) Microtribology and Friction-Induced Material Transfer in Layered MoS2 Nanoparticles Sprayed on a Steel Surface. In: Tribology Letters, 37 (2). pp. 313-326.

Sahoo, Rashmi R and Math, Souvik and Biswas, SK (2010) Mechanics of Deformation under Traction and Friction of a Micrometric Monolithic MoS2 Particle in Comparison with those of an Agglomerate of Nanometric MoS2 Particles. In: Tribology Letters, 37 (2). pp. 239-249.

Sahu, DK and Ananthasuresh, GK (2008) Optimal Design of a Meso-scale Gripper and its Prototyping with Spring Steel and PDMS. In: CD-ROM proceedings of ISSS 2008, International Conference on Smart Materials, Structures, and Systems, July 24-26, 2008, Bangalore, July 24-26, 2008, Bangalore.

Sain, Trisha and Narasimhan, R (2011) Constitutive modeling of ice in the high strain rate regime. In: International Journal of Solids and Structures, 48 (5). pp. 817-827.

Samanta, SK and Chattopadhyay, H and Dutta, P and Barman, N and Das, Prosenjit (2012) Rheological characterization of semi-solid A356 aluminium alloy. In: 12th International Conference on Semi-Solid Processing of Alloys and Composites, 8-11 October, 2012, Cape Town, South Africa.

Samantaray, Dipti and Kumar, Vinod and Bhaduri, AK and Dutta, Pradip (2014) Formation of annular austenitic ring between outer ferrite layer and solid globule in a semi-solid processed SS 304L. In: MATERIALS LETTERS, 135 . pp. 127-130.

Sambamurthy, NB and Shaija, A and Narasimham, GSVL and Murthy, MV Krishna (2008) Laminar conjugate natural convection in horizontal annuli. In: International Journal of Heat and Fluid Flow, 29 (5). pp. 1347-1359.

Samuel, Mathews P and Mukhopadhyay, Chiranjit and Shankar, Venkataraman (2006) Failure Mode Identification and Data Preparation for Aeroengine Reliability Studies. In: Presented in International Conference on Industrial Tribology held in Department of Mechanical Engineering, November 30–December 2 2006, IISc.

Sanan, Siddharth and Singh, Sarthj and Madhava Krishna, K (2007) Controlling an Actively Articulated Suspension Vehicle for Mobility in Rough Terrain. In: 10th International Conference on Climbing and Walking Robots (CLAWAR 2007), Jul. 16-18,2007, Singapore.

Sangamesh, Deepak R and Ghosal, Ashitava (2006) A Note on the Diagonalizability and the Jordan Form of the 4×4 Homogeneous Transformation Matrix. In: Journal of Mechanical Design, 128 (6). pp. 1343-1348.

Sankarasubramanian, R and Jog, CS and Abinandanan, TA (2002) Symmetry-breaking transitions in equilibrium shapes of coherent precipitates: Effect of elastic anisotropy and inhomogeneity. In: Metallurgical and Materials Transactions A, 33 (4). pp. 1083-1090.

Santhanam, S (2000) An elastic-viscoplastic constitutive model for the hot-forming of aluminum alloys. In: Journal of Materials Science (full set), 35 (14). 3647 -3654.

Santhosh, R and Miglani, Ankur and Basua, Saptarshi (2013) Transition and acoustic response of recirculation structures in an unconfined co-axial isothermal swirling flow. In: PHYSICS OF FLUIDS, 25 (8).

Santhosh, R and Miglani, Ankur and Basua, Saptarshi (2014) Transition in vortex breakdown modes in a coaxial isothermal unconfined swirling jet. In: PHYSICS OF FLUIDS, 26 (4).

Sanyal, A and Basu, S and Kumar, P (2014) Adsorption study of silica gel particle for improvement in design of adsorption beds used in solar driven cooling units. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 656-665.

Sanyal, Anuradha and Srinivasan, Kandadai and Dutta, Pradip (2009) Numerical Study of Heat Transfer From Pin-Fin Heat Sink Using Steady and Pulsated Impinging Jets. In: IIEEE Transactions on Components and Packaging Technologies, 32 (4). pp. 859-867.

Sanyal, Apratim and Basu, Saptarshi and Chowdhuri, Subham and Kabi, Prasenjit and Chaudhuri, Swetaprovo (2014) Precision control of drying using rhythmic dancing of sessile nanoparticle laden droplets. In: APPLIED PHYSICS LETTERS, 104 (16).

Sanyal, Apratim and Basu, Saptarshi and Kumar, Ranganathan (2014) Experimental analysis of shape deformation of evaporating droplet using Legendre polynomials. In: PHYSICS LETTERS A, 378 (5-6). pp. 539-548.

Saravanan, RA and Samajdar, I and Surappa, MK (1998) Microstructural characterisation of the subsurface plastic zone formed during erosion of A356 AI alloy and composites. In: Wear, 215 (1-2). pp. 223-231.

Saravanan, RA and Surappa, MK and Bai, BNP (1997) Erosion of A356 $Al-SiC_{\mu}$ composites due to multiple particle impact. In: Wear, 202 (2). pp. 154-164.

Sarkar, A and Sonti, VR (2009) Asymptotic analysis for the coupled wavenumbers in an infinite fluid-filled flexible cylindrical shell: The beam mode. In: Journal of Sound and Vibration, 319 (1-2). 646 -667.

Sarkar, Abhijit and Kunte, MV and Sonti, Venkata R (2011) Unified Dispersion Characteristics of Structural Acoustic Waveguides. In: Computer Modeling in Engineering and Sciences (CMES), 81 (3-4). pp. 249-267.

Sarkar, Abhijit and Sonti, Venkata (2007) An asymptotic approach for the coupled dispersion characteristics of a fluid-filled cylindrical shell. In: ICSV14, , July 9-12 2007, Cairns, Australia.

Sarkar, Abhijit and Sonti, Venkata (2007) An asymptotic approach for the coupled dispersion characteristics of a plate loaded with a fluid column. In: ICTACEM 2007, , Dec 27-29, 2007, IIT KGP, India.

Sarkar, Abhijit and Sonti, Venkata R (2007) Asymptotic analysis for the coupled wavenumbers in an infinite fluid-filled flexible cylindrical shell: The axisymmetric mode. In: Computer Modeling in Engineering and Sciences (CMES), 21 (3). pp. 193-207.

Sarkar, Abhijit and Sonti, Venkata R (2009) Simplified dispersion curves for circular cylindrical shells using shallow shell theory. In: Journal Of Sound And Vibration, 322 (1-2). pp. 1-7.

Sarkar, Abhijit and Sonti, Venkata R (2007) An asymptotic analysis for the coupled dispersion characteristics of a structural acoustic waveguide. In: Journal of Sound and Vibration, 306 (3-5). pp. 657-674.

Sarkar, Abhijit and Sonti, Venkata R and Pratap, Rudra (2005) A Coupled FEM-BEM Formulation in Structural Acoustics for Imaging a Material Inclusion. In: International Journal of Acoustics and Vibrations, 10 (1). pp. 3-16.

Sarkar, S and Chakraborty, S and Dutta, P (2001) A scaling analysis of momentum and heat transport in laser surface melting. In: Lasers in Engineering, 11 (1). pp. 57-75.

Sarkar, S and Chowdhury, SR and Venugopal, M and Vasu, RM and Roy, D (2014) A Kushner-Stratonovich Monte Carlo filter applied to nonlinear dynamical system identification. In: PHYSICA D-NONLINEAR PHENOMENA, 270 . pp. 46-59.

Sarkar, S and Raj, Mohan P and Chakraborty, S and Dutta, P (2002) Three-dimensional computational modeling of momentum, heat, and mass transfer in a laser surface alloying process. In: Numerical Heat Transfer Part A, 42 (3). pp. 307-326.

Sarkar, S and Raj, Mohan P and Chakraborty, S and Phanikumar, G and Chattopadhyay, K and Dutta, P (2003) Transport phenomena in laser surface alloying. In: Journal of Materials Science, 38 (1). pp. 155-164.

Sastry, JS and Munjal, ML (1998) Response of a multi-layered infinite cylinder to a plane wave excitation by means of transfer matrices. In: Journal of sound and vibration, 209 (1). pp. 99-121.

Sastry, JS and Munjal, ML (1998) Response of a multi-layered infinite cylinder to two-dimensional pressure excitation by means of transfer matrices. In: Journal of Sound and Vibration, 209 (1). pp. 123-142.

Sastry, JS and Munjal, ML (1995) A transfer matrix approach for evaluation of the response of a multi-layer infinite plate to a two-dimensional pressure excitation. In: Journal of Sound and Vibration, 182 (1). pp. 109-128.

Sathyanarayana, Y and Munjal, ML (2000) A Hybrid approach for aeroacoustic analysis of the engine exhaust system. In: Applied Acoustics, 60 (4). pp. 425-450.

Sebastian, S and Biswas, SK (1991) Effect of interface friction on the mechanics of indentation of a finite layer resting on a rigid substrate. In: Journal of Physics D: Applied Physics, 24 (7). pp. 1131-1140.

Seetharamu, S and Srinivasan, MN and Mangalgiri, PD (1981) Effect Of Graphite Size And Spacing On The Elastic-Constants Of Spheroidal Graphite Cast-Iron - An Analytical Approach. In: Journal of the Indian Institute of Science, 63 (9). pp. 213-226.

Selvan, Arul K and Biswas, SK (1994) Effect of anisotropy on dislocations at $YBa_2Cu_30_{7-x}-PrBa_2Cu_30_{7-x}$ epitaxial interfaces. In: Superconductor Science & Technology, 7 (11). pp. 805-811.

Selvan, Arul K and Biswas, SK (1994) Flux pinning due to stress concentration introduced by an ellipsoidal precipitate in a stressed $YBa_2Cu_30_7$ film. In: Physica C, 232 (3-4). pp. 233-240.

Selvan, KA and Biswas, SK (1995) Calculation of elastic pinning strength of semicoherent Y2BaCuO5 precipitates in YBa2Cu3O7. In: Philosophical Magazine Letters, 72 (1). pp. 33-39.

Sen, D and Joshi, V (2004) Issues in geometric synthesis of mechanisms. In: Mechanism and Machine Theory, 39 (12). pp. 1321-1330.

Sen, D and Mruthyunjaya, TS (1994) A discrete state perspective of manipulator workspaces Vorstellungen von diskreten zuständen von manipulator-arbeitsräumen. In: Mechanism and Machine Theory, 29 (4). 591 -605.

Sen, Dibakar and Chowdhury, Sanjib and Pandey, Shashank Ram (2004) Geometric design of interference-free planar linkages. In: Mechanism and Machine Theory, 39 (7). pp. 737-759.

Sen, Dibakar and Mruthyunjaya, TS (1998) A CENTRO-BASED CHARACTERIZATION OF SINGULARITIES IN THE WORKSPACE OF PLANAR CLOSED-LOOP MANIPULATORS. In: Mechanism and Machine Theory, 33 (8). pp. 1091-1104.

Sen, Dibakar and Singh, B Nagesh (2008) A geometric approach for determining inner and exterior boundaries of workspaces of planar manipulators. In: Journal of Mechanical Design, 130 (2). 022306.

Sen, Dibakar and Srikanth, TK (2008) Efficient computation of volume fractions for multi-material cell complexes in a grid by slicing. In: Computers & Geosciences, 34 (7). 754 -782.

Senve, Vinay and Narasimham, GSVL (2011) Effective thermal conductivity of a heat generating rod bundle dissipating heat by natural convection and radiation. In: Nuclear Engineering and Design, 241 (10). pp. 4331-4340.

Seshan, S and Kaneko, Junichi (1992) Advanced Materials Through Mechanical Alloying: A Retrospective Review. In: Advanced Composite Materials, 2 (2). pp. 153-170.

Seshan, S and Srivatsan, TS (1990) Casting Aluminium-Lithium Alloys in Open Atmosphere. In: Materials and Manufacturing Processes, 5 (1). 109 - 119.

Seshan, S and Jayamathy, M and Kailas, SV and Srivatsan, TS (2003) The tensile behavior of two magnesium alloys reinforced with silicon carbide particulates. In: Materials Science and Engineering A, 363 (1-2). pp. 345-351.

Seshan, S and Vijayalakshmi, D (1986) Heat pipes-concepts, materials and applications. In: Energy Conversion and Management, 26 (1). 1 -9.

Shah, MM and Srinivasan, MN and Seshadri, MR (1980) On standardization of slurry for investment shells using indigenous materials. In: Transactions of the Indian Institute of Metals, 33 (4). pp. 306-310.

Shaija, A and Narasimham, GSVL (2009) Effect of surface radiation on conjugate natural convection in a horizontal annulus driven by inner heat generating solid cylinder. In: International Journal of Heat and Mass Transfer, 52 (25-26). pp. 5759-5769.

Shamasundar, S and Marathe, AG and Biswas, SK (1991) Effect of process variables on die-billet temperature history in a slow speed hot coining type process. In: Journal of Engineering for Industry-Transactions of the ASME, 113 (4). pp. 362-372.

Shamsundar, S and Marathe, AG and Biswas, SK (1984) Development of a computer code to predict cooling of die and billet in forging. In: International Journal of Machine Tool Design and Research, 24 (4). pp. 311-320.

Shankara, A and Menezes, Pradeep L and Simha, KRY and Kailas, Satish V (2008) Study of solid lubrication with $MoS_2$ coating in the presence of additives using reciprocating ball-on-flat scratch tester. In: Sadhana, 33 (3). pp. 207-220.

Sharma, CL and Soundranayagam, S and Somkrishan, * and Mukund, TS (1998) Dependence of vortex breakdown on angular momentum parameter in draft tube flows. In: Current Science, 75 (12). pp. 1355-1363.

Sharma, NC and Manohar, S (1992) Line clipping revisited: Two efficient algorithms based on simple geometric observations. In: Computers & Graphics, 16 (1). pp. 51-54.

Sharma, Pradeep and Narasimhan, R and Mishra, RK (2008) Finite Element Analysis of Mode I Crack Tip Fields in Polycrystalline Plastic Solids. In: Proc. of Interquadrennial Conference of International Congress on Fracture (IQCICF08), IISc Bangalore, India, Aug. 2008, IISc Bangalore.

Sharma, SD (1987) Development of pseudo-two-dimensional turbulent wakes. In: Physics of Fluids, 30 (2). pp. 357-363.

Sharma, SD and Mani, K and Arakeri, VH (1990) Cavitation noise studies on marine propellers. In: Journal of Sound and Vibration, 138 (2). pp. 255-283.

Shashikant, Pawar and Jaywant, Arakeri (2012) High Rayleigh number convection in a long vertical tube. In: ICTAM(2012), 19 to 24 August, 2012, Beijing, China.

Shekhar, S and Vinoy, KJ and Ananthasuresh, GK (2009) Analysis of Transient Behaviour of Electrostatically Actuated Micromachined Switches. In: Proc. of the 3rd National ISSS Conference on MEMS, Smart Structures and Materials, Oct. 14-16, 2009, Kolkatta.

Shekhar, S and Vinoy , KJ and Ananthasuresh, GK (2011) Switching and Release Time Analysis of Electrostatically Actuated Capacitive RF MEMS Switches. In: IFSA, 130 (7). pp. 77-90.

Shinde, Sachin Y and Arakeri, Jaywant H (2013) Jet meandering by a foil pitching in quiescent fluid. In: Physics of Fluids, 25 (4). 041701_1-041701_8.

Shri Kant, * and Munjal, ML and Rao, DL Prasanna (1974) Waves in branched hydraulic pipes. In: Journal of Sound and Vibration, 37 (4). pp. 507-519.

Shrinivasa, U and Mukunda, HS (1984) Wood gas generators for small power $(\sim 5hp)$ requirements. In: Sadhana, 7 (2). pp. 137-154.

Shukla, Ratnesh K (2014) Nonlinear preconditioning for efficient and accurate interface capturing in simulation of multicomponent compressible flows. In: JOURNAL OF COMPUTATIONAL PHYSICS, 276 . pp. 508-540.

Shukla, Ratnesh K (2012) Simulation of multiphase compressible flows with an interface capturing method. In: 23rd International Congress of Theoretical and Applied Mechanics (ICTAM2012), 19 to 24 August, 2012, Beijing, China.

Shukla, Ratnesh K and Arakeri, Jaywant H (2013) Minimum power consumption for drag reduction on a circular cylinder by tangential surface motion. In: JOURNAL OF FLUID MECHANICS, 715 . pp. 597-641.

Shukla, Ratnesh K and Giri, Pritam (2014) Isotropic finite volume discretization. In: JOURNAL OF COMPUTATIONAL PHYSICS, 276 . pp. 252-290.

Shukla, S and Govardhan, RN and Arakeri, JH (2013) Dynamics of a flexible splitter plate in the wake of a circular cylinder. In: Journal of Fluids and Structures, 41 . pp. 127-134.

Shukla, S and Govardhan, RN and Arakeri, JH (2007) Flow over a bluff body with a flexible splitter plate. In: Fifth Conf. on Bluff Body Wakes and Vortex-Induced Vibrations (BBVIV5) Costa do Sauipe, , 12–15 December 2007, Brazil.

Shukla, S and Govardhan, RN and Arakeri, JH (2009) Flow over a cylinder with a hinged-splitter plate. In: Conference on Bluff Body Wakes and Vortex-Induced Vibrations, DEC 12-15, Brazil, pp. 713-720.

Shyamsundar, N and Gurumoorthy, B (1996) Construction of solid model from measured point data. In: 1996 IEEE International Conference on Robotics and Automation, APR 22-28, 1996, MINNEAPOLIS.

Simha, KRY (1996) Effect of open joint on stress wave propagation. In: 5th International Symposium on Rock Fragmentation by Blasting (FRAGBLAST-5), AUG 25-29, 1996, MONTREAL, CANADA,.

Simha, KRY and Jain, Rajeev and Ramachandra, K (1994) Variable density approach for rotating shallow shell of variable thickness. In: International Journal of Solids and Structures, 31 (6). pp. 849-863.

Simha, KRY and Mohapatra, SS (1998) Stress concentration around irregular holes using complex variable method. In: Sadhana, 23 (4). pp. 393-412.

Simha, KRY and Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2008) Friction tensor concept for textured surfaces. In: Sadhana, 33 (3). pp. 203-206.

Simha, KRY and Hande, HSS and Arora, PR (1993) Monitoring Fatigue Crack Propagation in Compact Tension Specimens via Remote Sensing of Back Face Strain. In: Journal of Testing and Evaluation, 21 (1). pp. 3-8.

Singh, RA and Jayaram, V and Biswas, SK (1999) Abrasion of $Al_{2}O_{3}-SiC-(Al,Si)$ composites made by melt oxidation. In: Journal of Materials Research, 14 (1). pp. 64-67.

Singh, Aravind R and Narasimham, GSVL and Biswas, SK (2002) Estimation of surface temperature of a pin wearing on a disk. In: Tribology Letters, 12 (4). pp. 203-207.

Singh, Archana and Gandra, Ravi T and Schneider, Eric W and Biswas, Sanjay K (2011) Lubricant Degradation and Related Wear of a Steel Pin in Lubricated Sliding Against a Steel Disc. In: ACS Applied Materials & Interfaces, 3 (7). pp. 2512-2521.

Singh, Archana and Gandra, Ravi T and Schneider, Eric W and Biswas, Sanjay K (2013) Studies on the Aging Characteristics of Base Oil with Amine Based Antioxidant in Steel-on-Steel Lubricated Sliding. In: JOURNAL OF PHYSICAL CHEMISTRY C, 117 (4). pp. 1735-1747.

Singh, Arvind R and Biswas, SK and Kailas, Satish V (1999) Sliding wear of cadmium against alumina. In: Wear, 225-22 (2). pp. 770-776.

Singh, Arvind R and Sood, AK and Jayaram, V and Biswas, SK (1998) Analysis of microresidual stresses in 6H-SiC particles within $Al_2O_3-SiC-(Al,Si)$ CMC using raman spectroscopy. In: Scripta Materialia, 38 (4). pp. 617-622.

Singh, Bhagwant and Tirunarayanan, MA (1980) Dynamic viscosity of ternary mixtures of dichlorodifluoromethane (R-12), chlorodifluoromethane (R-22), and dichlorotetrafluoroethane (R-114) vapors. In: Journal of Chemical & Engineering Data, 25 (1). pp. 57-59.

Singh, I and Guo, TF and Murali, P and Narasimhan, R and Zhang, YW and Gao, HJ (2013) Cavitation in materials with distributed weak zones: Implications on the origin of brittle fracture in metallic glasses. In: JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 61 (4). pp. 1047-1064.

Singh, Puneet and Ananthasuresh, GK (2013) A Compact and Compliant External Pipe-Crawling Robot. In: IEEE TRANSACTIONS ON ROBOTICS, 29 (1). pp. 251-260.

Singh, Satwinder Jit and Chatterjee, Anindya (2010) Beyond fractional derivatives: local approximation of other convolution integrals. In: Proceedings of the royal society a-mathematical physical and engineering sciences, 466 (2114). pp. 563-581.

Singh, Satwinder Jit and Chatterjee, Anindya (2007) Fractional damping: Stochastic origin and finite approximations. In: 2nd Symposium on Fractional Derivatives and Their Applications (FDTAs, SEP, 2005, Long Beach, CA.

Singh, Satwinder Jit and Chatterjee, Anindya (2006) Galerkin Projections and Finite Elements for Fractional Order Derivatives. In: Nonlinear Dynamics, 45 (1-2). pp. 183-206.

Singh, Satwinder Jit and Chatterjee, Anindya (2004) Nonintrusive Measurement of Contact Forces During Vibration Dominated Impacts. In: Journal Of Dynamic Systems Measurement And Control-transactions Of The, 126 (3). pp. 489-497.

Singh, Satwinder Jit and Chatterjee, Anindya (2011) Unified Galerkin- and DAE-Based Approximation of Fractional Order Systems. In: Journal of Computational and Nonlinear Dynamics, 6 (2).

Singh, Shailesh K and Chattopadhyay, K and Phanikumar, G and Dutta, P (2014) Experimental and numerical studies on friction welding of thixocast A356 aluminum alloy. In: ACTA MATERIALIA, 73 . pp. 177-185.

Singh, Virendra and Karakoti, Ajay and Kumar, Amit and Saha, Abhishek and Basu, Saptarshi and Seal, Sudipta (2010) Precursor Dependent Microstructure Evolution and Nonstoichiometry in Nanostructured Cerium Oxide Coatings Using the Solution Precursor Plasma Spray Technique. In: Journal of the American Ceramic Society, 93 (11). pp. 3700-3708.

Singhal, Atul and Ravikrishna, RV (2006) Numerical Study of a Single Cavity Trapped Vortex Combustor for Aero Gas Turbine Engines. In: 18th National & 7th ISHMT-ASME Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati, India.

Singhal, Atul and Shetty, Dinesh and Ravikrishna, RV (2007) Numerical Simulations of a Trapped Vortex Combustor. In: 6th Asia-Pacific Conference on Combustion, , 2007, Nagoya, Japan.

Singhal, Atul and Shetty, Dinesh A and Ravikrishna, RV (2006) Single Cavity Trapped Vortex Combustor Simulations. In: Proceedings of the 8th National Conference on Air-breathing Engines and Aerospace Propulsion, December 12-14 2006, Pune.

Sinha, SC and Srinivasan, P (1971) Application of ultraspherical polynomials to non-linear autonomous systems. In: Journal of Sound and Vibration, 18 (1). pp. 55-60.

Sinha, SC and Srinivasan, P (1972) An approximate analysis of non-linear non-conservative systems subjected to step function excitation. In: Journal of Sound and Vibration, 22 (2). pp. 211-219.

Sinha, SC and Srinivasan, P (1971) A weighted mean square method of linearization in non-linear oscillations. In: Journal of Sound and Vibration, 16 (2). pp. 139-148.

Sinha, SK and Biswas, SK (1995) Effect of sliding speed on friction and wear of uni-directional aramid fibre-phenolic resin composite. In: Journal of Materials Science (full set), 30 (9). pp. 2430-2437.

Sivanagendra, P and Ananthasuresh, GK (2009) Size optimization of a cantilever beam under deformation-dependent loads with application to wheat stalks. In: 7th World Congress of Structural and Multidisciplinary Optimization, MAY 21, 2007-MAY 25, 2008, Seoul, South Korea, pp. 327-336.

Sivanagendra, P and Ananthasuresh, GK (2007) Size-Optimization of a Beam under Deformation Dependent Loads. In: 7th World Congress of Structural and Multidisciplinary Optimization, COEX Seoul,, 21-25, May, 2007, South Korea.

Solomon, Christopher S and Sinha, PP and Suresh, MR and Kailas, Satish V (2007) Friction in Bulk plastic deformation. In: National Aerospace Manufacturers Seminar, NAMS-2007, , Dec 6-7, 2007, Thiruvanathapuram.

Soni, PM and Chockalingam, A (2002) A k-epsilon model for turbulent weld pool convection in gas metal arc welding process. In: 6th International Conference on Trends in Welding Research, APR 15-19, 2002, Phoenix, Arizona.

Soni, Sourabh and Gurumoorthy, B (2003) Handling Solids of Revolution in Volume-Based Construction of Solid Models From Orthographic Views. In: Journal of Computing and Information Science in Engineering, 3 (3). pp. 250-259.

Sonti, Venkata R (2008) Dynamics and Control Systems (ME240) Lecture Notes. [Book Chapter] (Unpublished)

Sonti, VR (2003) Sound radiation from a baffled rectangular plate under a variable line constraint. In: Journal of Sound and Vibration, 265 (1). pp. 235-243.

Soundranayagam, S (1973) Concept of slip factor in axial impellers. In: Journal of Mechanical Engineering Science, 15 (2). p. 153.

Soundranayagam, S and Saha, TK (1996) Performance of a mixed flow pump with varying tip clearance .2. In: Proceedings of the Institution of Mechanical Engineers - Part A: Journal of Power and Energy, 210 (4). pp. 319-327.

Sreedhar, N and Rao, SN (1968) Stability of a System of Linear Differential Equations. In: IEEE Transactions on Automatic Control, 13 (3). pp. 307-308.

Sreenath, AV and Munjal, ML (1970) Evaluation of noise attenuation due to exhaust mufflers. In: Journal of Sound and Vibration, 12 (1). pp. 1-19.

Sreenath, AV and Raman, N (1976) Running-in wear of a compression ignition engine: Factors influencing the conformance between cylinder liner and piston rings. In: Wear, 38 (2). 271 - 289.

Sreenath, AV and Venkatesh, S (1970) Experimental studies on the wear of engine components. In: Wear, 16 (4). pp. 245-254.

Sreenivas, KR and Arakeri, Jaywant H and Srinivasan, J (1995) Modeling the Dynamics of the Mixed Layer in Solar Ponds. In: Solar Energy, 54 (3). pp. 193-202.

Sreenivas, KR and De, PK and Arakeri, JH (1999) Levitation of a drop over a film flow. In: Journal of Fluid Mechanics, 380 . pp. 297-307.

Sreenivas, KR and Dey, PK and Arakeri, Jaywant H and Srinivasan, J (1995) Study of the erosion of stably stratified medium heated from below. In: Fourteenth International Conference on Numerical Methods in Fluid Dynamics. Proceedings of the Conference, 11-15 July 1994, Bangalore, India, pp. 551-555.

Sreenivas, KR and Singh, OP and Srinivasan, J (2009) On the relationship between finger width, velocity, and fluxes in thermohaline convection. In: Physics Of Fluids, 21 (2). 026601-026615.

Sreenivasan, K and Ramachandran, A (1961) Effect of vibration on heat transfer from a horizontal cylinder to a normal air stream. In: International Journal of Heat and Mass Transfer, 3 (1). pp. 60-62.

Sreenivasan, S and Goel, Piyush and Ghosal, Ashitava (2007) Redundancy resolution using a tractrix and its application to real-time simulations of hyper-redundant manipulators, snakes and tying of knots. In: 12th IFToMM World Congress, June 18-21, 2007, Besancon.

Sreenivasan, S and Goel, Piyush and Ghosal, Ashitava (2010) A real-time algorithm for simulation of flexible objects and hyper-redundant manipulators. In: Mechanism and Machine Theory, 45 (3). pp. 454-466.

Sreeramulu, K and Biswas, P and Narasimhan, R and Mishra, RK (2013) Ductile fracture by multiple void growth and interaction ahead of a notch tip in polycrystalline plastic solids. In: International Journal of Fracture, 180 (2). pp. 145-161.

Sreeramulu, K and Sharma, P and Narasimhan, R and Mishra, Raja K (2010) Numerical simulations of crack tip fields in polycrystalline plastic solids. In: Engineering Fracture Mechanics, 77 (8). pp. 1253-1274.

Sreeramulu, K and Sharma, P and Narasimhan, R and Mishra, Raja K (2010) Numerical simulations of crack tip fields in polycrystalline plastic solids. In: Engineering Fracture Mechanics, 77 (8). pp. 1253-1274.

Srichand, M and Tirunarayanan, MA (1969) Viscosity correlation for mixtures of Freon-12 and Freon-22 vapors. In: Journal of Chemical and Engineering Data, 14 (3). pp. 289-292.

Srichand, M and Tirunarayanan, MA and Ramachandran, A (1969) Determination of mixture composition by the float balance. In: Journal of Physics E - Scientific Instruments, 2 (6). pp. 539-541.

Sridhar, S and Srinivasan, Malur N and Seshadri, MR (1989) Thermal behavior of cores during solidification of castings. In: Regional Journal of Energy, Heat and Mass Transfer, 11 (1). pp. 51-55.

Sridharan, A and Abraham, BM and Jose, BT (1991) Improved technique for estimation of preconsolidation pressure. In: Geotechnique, 41 (2). 263 -268.

Srinath, LS and Murthy, NS and Hareesh, TV (1983) Determination of stress-intensity factors for cracks in tubes under torsion. In: Experimental Mechanics, 23 (3). pp. 262-267.

Srinath, LS and Aradhya, KSS and Srinivasa Murthy, N (1981) On the influence of elastic constants on stresses near notch tips. In: Mechanics Research Communications, 8 (5). pp. 287-295.

Srinath, LS and Bhave, SK (1974) New nondestructive method for three-dimensional photoelasticity. In: Experimental Mechanics, 14 (9). pp. 367-372.

Srinath, LS and Bhave, SK (1974) A new nondestructive method for three-dimensional photoelasticity. In: Experimental Mechanics, 14 (9). pp. 367-372.

Srinath, LS and Keshavan, SY (1975) A critical analysis of the shear difference method. In: Journal of Physics D: Applied Physics, 8 (5). pp. 463-479.

Srinath, LS and Keshavan, SY (1978) A fast iterative procedure to determine photoelastic characteristic parameters. In: Mechanics Research Communications, 5 (3). 159-165 .

Srinath, LS and Sarma, AVSSSR (1973) Determination of integral fringe order in photoelasticity. In: Experimental Mechanics, 13 (3). pp. 138-141.

Srinath, LS and Sarma, AVSSSR (1974) Determination of the optically equivalent model in three-dimensional photoelasticity. In: Experimental Mechanics, 14 (3). pp. 118-122.

Srinivas, K and Gururaja, J (1977) On the computation of two-dimensional compressible flow fields by the modified local stability scheme. In: Computers & Fluids, 5 (3). pp. 139-150.

Srinivas, MV and Alva, P and Biswas, SK (1989) Slip line field analysis of a simple plane strain closed‐die forging. In: Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture, 203 (B2). pp. 91-99.

Srinivasa Murthy, N and Bhagwat, SK and Patil, VS (1985) Two-parameter methods using two fringe loops-A comparative study. In: Mechanics Research Communications, 12 (3). pp. 147-154.

Srinivasan, Kandadai (1992) CFC Alternatives: A Fresh Look. In: Environmental Conservation, 19 (4). pp. 339-342.

Srinivasan, J (1992) Convection suppression in horizontal solar collectors using density stratification. In: Solar Energy, 48 (5). pp. 287-289.

Srinivasan, J (1996) Human influence on global climate. In: Current Science (Bangalore), 71 (9). pp. 667-669.

Srinivasan, J (1998) Monsoons: Past, present and future. In: Current Science, 74 (3). pp. 187-189.

Srinivasan, J (1990) Performance of a small solar pond in the tropics. In: Solar Energy, 45 (4). pp. 221-230.

Srinivasan, J (1990) Power generation through renewable sources of energy. In: Current Science (Bangalore), 59 (3). pp. 131-132.

Srinivasan, J (1993) Solar pond technology. In: Sadhana : Academy Proceedings in Engineering Sciences, 18 (Part 1). pp. 39-55.

Srinivasan, J and Angirasa, D (1990) Laminar axisymmetric multicomponent buoyant plumes in a thermally stratified medium. In: International Journal of Heat and Mass Transfer, 33 (8). pp. 1751-1757.

Srinivasan, J and Angirasa, D (1988) Numerical study of double-diffusive free convection from a vertical surface. In: International Journal of Heat and Mass Transfer, 31 (10). pp. 2033-2038.

Srinivasan, J and Basu, Biswajit (1986) A numerical study of thermocapillary flow in a rectangular cavity during laser melting. In: International Journal of Heat and Mass Transfer, 29 (4). pp. 563-572.

Srinivasan, J and Guha, Abhijit (1987) Concentration profile in the gradient zone of small solar ponds. In: Solar Energy, 38 (2). pp. 135-136.

Srinivasan, J and Guha, Abhijit (1987) The effect of bottom reflectivity on the performance of a solar pond. In: Solar Energy, 39 (4). 361 -367.

Srinivasan, J and Kumar, R and Gandhi, KS (1987) A Theory for the Enhancement of the Photoacoustic Signals by Volatile Liquids. In: Applied Physics B: Lasers and Optics, 43 (1). pp. 35-41.

Srinivasan, J and Rao, NS (1984) Numerical study of heat transfer in laminar film boiling by the finite-difference method. In: International Journal of Heat and Mass Transfer, 27 (1). pp. 77-84.

Srinivasan, K (2001) Curvature of the vapour pressure curve. In: Chemical Engineering Journal, 81 (1-3). pp. 63-67.

Srinivasan, K (1989) Diffusion of krypton in liquid argon at infinite dilution. In: Cryogenics, 29 (9). pp. 935-936.

Srinivasan, K (2005) Measurement of air leakage in air-handling units and air conditioning ducts. In: Energy and Buildings, 37 (3). pp. 273-277.

Srinivasan, K (1994) A comparative-study of vapor-compression refrigeration working fluids, in the wake of the montreal protocal. In: Journal of the Institute of Energy, 67 (472). pp. 109-112.

Srinivasan, K (1993) A focus on the behaviour of certain thermodynamic properties of saturated cryogenic liquids. In: Journal of Physics D, 26 (3). pp. 448-451.

Srinivasan, K (2002) An interesting feature of the vapour pressure curve. In: Zeitschrift für Physikalische Chemie, 216 (12). 1379-1387 .

Srinivasan, K and Lim, YK and Wijeysundera, NE (2003) Exergetic analysis of carbon dioxide vapour compression refrigeration cycle using the new fundamental equation of state. In: Energy Conversion and Management, 44 (20). pp. 3267-3278.

Srinivasan, K and Murthy, Krishna MV (1990) An integral method of solution for unsteady heat conduction in cylindrical insulations. In: Mathematical and Computer Modelling, 13 (2). pp. 15-21.

Srinivasan, K and Oellrich, LR (1998) Saturated liquid thermal conductivity correlations for some new refrigerants. In: International Journal of Energy Research, 22 (6). pp. 579-590.

Srinivasan, K and Wijeysundera, NE (2001) Heat and moisture transport in wet cork slabs under temperature gradients. In: Building and Environment, 36 (1). pp. 53-57.

Srinivasan, Kandadai and Dutta, Pradip and Ng, Kim Choon and Saha, Bidyut Baran (2012) Calculation of Heat of Adsorption of Gases and Refrigerants on Activated Carbons from Direct Measurements Fitted to the Dubinin-Astakhov Equation. In: ADSORPTION SCIENCE & TECHNOLOGY, 30 (7). pp. 549-565.

Srinivasan, Kandadai and Dutta, Pradip and Saha, Bidyut Baran and Ng, Kim Choon and Prasad, Madhu (2013) Realistic minimum desorption temperatures and compressor sizing for activated carbon + HFC 134a adsorption coolers. In: APPLIED THERMAL ENGINEERING, 51 (1-2). pp. 551-559.

Srinivasan, Kandadai and Dutta, Pradip and Velasco, Santiago and White, Juan A (2013) On isentropic lines and isentropic exponents. In: Journal of Chemical Thermodynamics, 56 . pp. 144-148.

Srinivasan, Kandadai and Saha, Bidyut Baran and Ng, Kim Choon and Dutta, Pradip and Prasad, Madhu (2011) A method for the calculation of the adsorbed phase volume and pseudo-saturation pressure from adsorption isotherm data on activated carbon. In: PCCP: Physical Chemistry Chemical Physics, 13 (27). pp. 12559-12570.

Srinivasan, Kandadai and Velasco, Santiago and White, Juan A (2014) Relation between the Isentropic Index and the Gruneisen Parameter for Saturated Liquids. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 53 (16). pp. 6866-6870.

Srinivasan, R and Munjal, ML (1998) A fully automatic 3-D analysis tool for expansion chamber mufflers. In: Sadhana, 23 (2). pp. 195-212.

Sriram, BR and Mruthyunjaya, TS (1995) Dynamics of Flexible-Link Mechanisms. In: Computers & Structures, 56 (6). pp. 1029-1037.

Sriram, BR and Mruthyunjaya, TS (1995) Synthesis of path generating flexible-link mechanisms. In: Computers & Structures, 56 (4). pp. 657-666.

Sriram, K and Narasimhan, R and Biswas, SK (2003) A numerical fracture analysis of indentation into thin hard films on soft substrates. In: Engineering Fracture Mechanics, 70 (10). pp. 1323-1338.

Srirangarajan, HR and Dasarathy, BV (1975) Decoupling in non-linear systems with two degrees of freedom. In: Journal of Sound and Vibration, 38 (1). 1 -8.

Srirangarajan, HR and Dasarathy, BV (1974) Effect of creep deformations in mechanical systems under combined deterministic and random inputs. In: Journal of Sound and Vibration, 37 (4). pp. 453-458.

Srirangarajan, HR and Dasarathy, BV (1975) Study of third-order non-linear systems- Variation of parameters approach. In: Journal of Sound and Vibration J Sound Vib, 40 (2). pp. 173-178.

Srirangarajan, HR and Srinivasan, P (1974) Application of ultraspherical polynomials to forced oscillations of a third-order non-linear system. In: Journal of Sound and Vibration, 36 (4). pp. 513-519.

Srirangarajan, HR and Srinivasan, P (1974) Reply to the notes by Dr A. Tondl. In: Journal of Sound and Vibration, 37 (2). p. 279.

Srirangarajan, HR and Srinivasan, P (1973) The transient response of certain third-ordernon-linear systems. In: Journal of Sound and Vibration, 29 (2). pp. 215-226.

Srirangarajan, HR and Srinivasan, P and Dasarathy, BV (1974) Analysis of two degrees of freedom systems through weighted mean square linearization approach. In: Journal of Sound and Vibration, 36 (1). pp. 119-131.

Srirangarajan, HR and Srinivasan, P and Dasarathy, BV (1974) Analysis of two degrees of freedom systems through weighted mean square linearization approach. In: Journal of Sound and Vibration, 36 (1). pp. 119-131.

Srirangarajan, HR and Srinivasan, P and Dasarathy, BV (1975) Ultraspherical polynomials approach to the study of third-order non-linear systems. In: Journal of Sound and Vibration, 40 (2). pp. 167-172.

Srirangarajan, HR and Srinivasan, p (1974) Notes on solution of forced-oscillations of a third-order nonlinear-system - reply. In: Journal of Sound and Vibration, 37 (2). 279 -279.

Srivatsan, Arun R and Bandyopadhyay, Sandipan and Ghosal, Ashitava (2013) Analysis of the degrees-of-freedom of spatial parallel manipulators in regular and singular configurations. In: MECHANISM AND MACHINE THEORY, 69 . pp. 127-141.

Subhalakshmi, K and Devaprakasam, D and Math, S and Biswas, SK (2008) Use of eyring equation to explore the frictional responses of a -CF3 and a -CH3 terminated monolayers self assembled on silicon substrate. In: Tribology Letters, 32 (1). 01-11.

Subramani, S and Gurumoorthy, B (2003) Associativity Between Feature Models Across Domains. In: Eighth ACM Symposium on Solid Modelling and Applications, June 16–20, 2003, Seattle, Washington, USA., 316 -321.

Subramani, S and Gurumoorthy, B (2005) Maintaining associativity between form feature models. In: Computer-Aided Design, 37 (13). pp. 1319-1334.

Subramani, S and Nalluri, Rao SRP and Gurumoorthy, B (2004) 3D clipping algorithm for feature mapping across domains. In: Computer-Aided Design, 36 (8). pp. 701-721.

Subramanya, HY and Viswanath, S and Narasimhan, R (2005) A Three-dimensional Numerical Study of Mixed Mode (I and II) Crack Tip Fields in Elastic–plastic Solids. In: International Journal of Fracture, 136 (1-4). 167 -185.

Subramanya, HY and Viswanath, S and Narasimhan, R (2009) Constraint effects on multiple void interaction in pressure sensitive plastic solids. In: Engineering Fracture Mechanics, 76 (8). pp. 1049-1073.

Subramanya, HY and Viswanath, S and Narasimhan, R (2008) Influence of crack tip constraint on void growth in pressure sensitive plastic solids – I: 2D analysis. In: Engineering Fracture Mechanics, 75 (5). pp. 1045-1063.

Subramanya, HY and Viswanath, S and Narasimhan, R (2007) A three-dimensional numerical study of mode I crack tip fields in pressure sensitive plastic solids. In: International Journal of Solids and Structures, 44 (6). pp. 1863-1879.

Subudh, Sudhakar and Arakeri, Jaywant H and Sreenivas, KR and UNSPECIFIED (2008) Fluid mechanics and heat transfer of natural ventilation. In: 19th National and 8th ISHMT-ASME Heat and Mass Transfer Conference, JNTU, Hyderabad, India , Hyderabad.

Subudhi, S and Arakeri, JH (2012) Plumes Dynamics and Heat Transfer over Horizontal Grooved Surfaces. In: Experimental Heat Transfer, 25 (1). pp. 58-76.

Subudhi, Sudhakar and Arakeri, Jaywant H (2012) Flow visualization in turbulent free convection over horizontal smooth and grooved surfaces. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 39 (3). pp. 414-418.

Subudhi, Sudhakar and Sreenivas, KR and Arakeri, Jaywant H (2012) Real source-sink pair. In: International Journal of Heat and Mass Transfer, 55 (5-6). pp. 1650-1660.

Subudhi, Sudhakar and Sreenivas, KR and Arakeri, Jaywant H (2012) Removal of unwanted fluid. In: Heat and Mass Transfer/Waerme- und Stoffuebertragung . pp. 1-12.

Subudhi, Sudhakar and Sreenivas, KR and Arakeri, Jaywant H (2013) Removal of unwanted fluid. In: HEAT AND MASS TRANSFER, 49 (1). pp. 95-106.

Subudhi, Sudhakar and Sreenivas, KR and Arakeri, Jaywant H (2012) Study of Submerged Jet for Suction of Fluid. In: JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 134 (9).

Subudhi, Sudhakar and Sreenivas, KR and Arakeri, Jaywant H (2013) Study of buoyant jets in natural ventilation of a model room. In: International Journal of Heat and Mass Transfer, 64 . pp. 91-97.

Sumit, Basu and Narasimhan, R (2000) A numerical investigation of loss of crack tip constraint in a dynamically loaded ductile specimen. In: Journal of the Mechanics and Physics of Solids, 48 (9). pp. 1967-1985.

Sundar, S Shama and Marathe, AG and Biswas, SK (1987) Temperature characteristics of the billet and the dies in a small batch forging production. In: Journal of Mechanical Working Technology, 15 (2). pp. 203-213.

Sundaram, Meenakshi M and Ananthasuresh, GK (2013) A note on the inverse mode shape problem for bars, beams, and plates. In: INVERSE PROBLEMS IN SCIENCE AND ENGINEERING, 21 (1). pp. 1-16.

Sundaram, Meenakshi M and Limaye, Padmanabh and Ananthasuresh, GK (2012) Design of conjugate, conjoined shapes and tilings using topology optimization. In: Structural and Multidisciplinary Optimization, 45 (1). pp. 65-81.

Sunder, S and Tomar, G (2012) Quasi-static bubble formation from submerged needle under non-uniform electric field. In: 23rd International Congress of Theoretical and Applied Mechanics (ICTAM2012), 19 to 24 August, 2012, Beijing, China.

Sunder, Shyam and Tomar, Gaurav (2013) Numerical simulations of bubble formation from submerged needles under non-uniform direct current electric field. In: PHYSICS OF FLUIDS, 25 (10).

Surappa, MK and Rohatgi, PK (1978) Properties of Aluminum-Graphite Particle Composites Made using Copper Coated Graphite. In: Transactions of the Indian Institute of Metals, 31 (5-6). p. 488.

Surendra, KVN and Simha, KRY (2014) Analysis of cracked and un-cracked semicircular rings under symmetric loading. In: ENGINEERING FRACTURE MECHANICS, 128 . pp. 69-90.

Surendra, KVN and Simha, KRY (2014) Characterizing Frictional Contact Loading via Isochromatics. In: EXPERIMENTAL MECHANICS, 54 (6). pp. 1011-1030.

Surendra, KVN and Simha, KRY (2013) Design and analysis of novel compression fracture specimen with constant form factor: Edge cracked semicircular disk (ECSD). In: Engineering Fracture Mechanics, 102 . pp. 235-248.

Surendra, KVN and Simha, KRY (2013) Synthesis and application of weight function for edge cracked semicircular disk (ECSD). In: Engineering Fracture Mechanics, 107 . pp. 61-79.

Suresha, SJ and Bhide, R and Jayaram, V and Biswas, SK (2006) Processing, microstructure and hardness of TiN/(Ti, Al)N multilayer coatings. In: Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 429 (1-2). 252 -260.

Suresha, SJ and Gunda, R and Jayarama, V and Biswas, SK (2007) Effect of residual stress on the fracture strength of columnar TiN films. In: Journal of Material Research, 22 (12). pp. 3501-3506.

Suresha, SJ and Math, S and Jayaram, V and Biswas, SK (2007) Toughening through multilayering in TiN–AlTiN films. In: Philosophical Magazine, 87 (17). pp. 2521-2539.

Swantek, AB and Shukla, RK and Austin, JM (2010) Effect of loading wave profile on hydrodynamic void collapse in detonation initiation. In: 48th AIAA Aerospace Sciences Meeting, January 2010, Orlando, Florida, USA.

T

Tallapragada, Pavan K and Mohanty, Atanu K and Chatterjee, Anindya and Menon, AG (2007) Geometry optimization of axially symmetric ion traps. In: International Journal of Mass Spectrometry, 264 (1). pp. 38-52.

Talukder, Santanu and Kumar, Praveen and Pratap, Rudra (2013) Electric current-induced mass flow in very thin infinite metallic films. In: IEEE Transactions on Electron Devices, 60 (9). pp. 2877-2883.

Tandaiya, P and Narasimhan, R and Ramamurty, U (2008) On Numerical Implementation of an Isotropic Viscoplastic Constitutive Model for Metallic Glasses. In: Proc. of International Conference on Advances in Mechanical Engineering (IC-ICAME), IISc Bangalore, July 2008, July 2008, IISc Bangalore.

Tandaiya, Parag and Narasimhan, R and Ramamurty, U (2007) Mode I crack tip fields in amorphous materials with application to metallic glasses. In: Acta Materialia, 55 (19). pp. 6541-6552.

Tandaiya, Parag and Narasimhan, R and Ramamurty, U (2013) On the mechanism and the length scales involved in the ductile fracture of a bulk metallic glass. In: Acta Materialia, 61 (5). pp. 1558-1570.

Tandaiya, Parag and Ramamurty, U and Narasimhan, R (2009) Mixed mode (I and II) crack tip fields in bulk metallic glasses. In: Journal of the Mechanics and Physics of Solids, 57 (11). pp. 1880-1897.

Tandaiya, Parag and Ramamurty, U and Ravichandran, G and Narasimhan, R (2008) Effect of Poisson's ratio on crack tip fields and fracture behavior of metallic glasses. In: Acta Materialia, 56 (20). pp. 6077-6086.

Tantri, Srikari P and Jayasingh, Moses E and Biswas, SK and Ramasesha, Sheela K (2002) Role of in situ generated tribofilm on the tribological characteristics of monolith and TiB2 reinforced MoSi2 intermetallic. In: Materials Science and Engineering A, 336 (1-2). pp. 64-71.

Tennyson, Gerald P and Kumar, PV and Lakshmi, H and Phanikumar, G and Dutta, P (2010) Experimental studies and phase field modeling of microstructure evolution during solidification with electromagnetic stirring. In: Transactions of Nonferrous Metals Society of China, 20 (Suppl.). S774-S780.

Tewari, Sumit and Anand, TNC and Nishikant, MP and Ravikrishna, RV (2014) Study of liquid fuel transport in a small carburetted engine in the context of cold-start HC emission control. In: SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 39 (3). pp. 549-571.

Thakare, Amol G and Narasimhan, R and Mishra, RK (2008) Numerical Simulations of Void Growth near a Notch Tip in Ductile FCC Single Crystals. In: Proc. of Interquadrennial Conference of International Congress on Fracture (IQCICF08), IISc Bangalore, Aug. 2008, IISc Bangalore.

Thakare, Amol G and Narasimhan, R and Mishra, RK (2009) Numerical simulations of void growth near a notch tip in ductile single crystals. In: Mechanics Of Materials, 41 (5). pp. 506-519.

Thanapandi, P and Prasad, R (1994) A quasi-steady performance prediction model for dynamic characteristics of a volute pump. In: Proceedings of the Institution of Mechanical Engineers - Part A: Journal of Power and Energy, 208 (A1). pp. 47-58.

Tharakeshwar, Appala and Ghosal, Ashitava (2013) A THREE-WHEELED MOBILE ROBOT FOR TRAVERSING UNEVEN TERRAIN WITHOUT SLIP: SIMULATION AND EXPERIMENTS. In: MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 41 (1). 60-78.

Theerthan, Ananda S and Arakeri, Jaywant H (1994) Planform Structure of Turbulent Rayleigh-Bénard Convection. In: International Communications in Heat and Mass Transfer, 21 (4). pp. 561-572.

Theerthan, Ananda S and Arakeri, Jaywant H (2000) Planform structure and heat transfer in turbulent free convection over horizontal surfaces. In: Physics of Fluids, 12 (4). pp. 884-894.

Theerthan, Ananda S and Arakeri, Jaywant H (1998) A model for near-wall dynamics in turbulent Rayleigh-Benard convection. In: Journal of Fluid Mechanics, 373 . pp. 221-254.

Theerthan, SA and Arakeri, Jaywant H (1997) Planform structure of turbulent free convection on horizontal surfaces. In: Turbulence, heat and mass transfer 2; Proceedings of the 2nd International Symposium, 9-12 June 1997, Delft, Netherlands.

Theodore, RJ and Arakeri, JH and Ghosal, A (1996) The Modelling of Axially Translating Flexible Beams. In: Journal of Sound and Vibration, 191 (3). pp. 363-376.

Theodore, RJ and Ghosal, A (1995) Comparison of the assumed modes and finite element models for flexible multilink manipulators. In: International Journal of Robotics Research, 14 (2). pp. 91-111.

Theodore, Rex J and Ghosal, Ashitava (1997) Modeling of Flexible-Link Manipulators with Prismatic Joints. In: IEEE Transactions on Systems, Man and Cybernetics, Part B, 27 (2). 296 -305.

Theodore, Rex J and Ghosal, Ashitava (2003) Robust control of multilink flexible manipulators. In: Mechanism and Machine Theory, 38 (4). pp. 367-377.

Tijerino, Erick and Basu, Saptarshi and Kumar, Ranganathan (2013) Nanoparticle agglomeration in an evaporating levitated droplet for different acoustic amplitudes. In: JOURNAL OF APPLIED PHYSICS, 113 (3).

Tiwari, A and Shukla, RK and Pantano, C and Freund, JB (2009) A finite-volume contact -capturing scheme. In: 62nd Annual Meeting of the American Physical Society Division of Fluid Dynamics, Minneapolis, November 2009, Minnesota, USA.

Tiwary, CS and Kashyap, S and Biswas, K and Chattopadhyay, K (2013) Synthesis of pure iron magnetic nanoparticles in large quantity. In: Journal of Physics D: Applied Physics, 46 (38). 385001_1-385001_6.

Tomar, G (2012) Electric field induced drop-drop interactions. In: 23rd International Congress of Theoretical and Applied Mechanics (ICTAM2012), Aug 19-Aug 24, 2012, Beijing, China.

Tomar, Gaurav and Bandopadhayay, Dipankar and Sharma, Ashutosh (2011) Instabilities of soft elastic microtubes filled with viscous fluids: Pearls, wrinkles, and sausage strings. In: Physical Review E - Statistical, Nonlinear and Soft Matter Physics, 84 (3, Par).

Tomar, Gaurav and Sharma, Ashutosh (2012) Contact instabilities of anisotropic and inhomogeneous soft elastic films. In: Physical Review E - Statistical, Nonlinear and Soft Matter Physics, 85 (2, Par).

Tran, LV and Valentino, MI and Saha, A and Slabaugh, CD and Ricklick, M and Kapat, JS and Basu, S (2011) PIV study on the dimple mid-plane of a narrow rectangular channel with dimples applied to one wall. In: ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition (GT2011) , June 6–10, 2011, Vancouver, British Columbia, Canada , pp. 1517-1527.

Tveito, KO and Bedel, M and Zaloznik, M and Combeau, H and Hamdi, MM and Kumar, A and Dutta, P (2012) Numerical study of the impact of inoculant and grain transport on macrosegregation and microstructure formation during solidification of an Al-22%Cu alloy. In: IOP Conference Series: Materials Science and Engineering, 2012.

U

Unocic, RR and Viswanathan, GB and Sarosi, PM and Karthikeyan, S and Li, J and Mills, MJ (2008) Mechanisms of creep deformation in polycrystalline Ni-base disk superalloys. In: Materials Science and Engineering: A, 483-48 . pp. 25-32.

Upadhyay, Anil Kumar and Simha, KRY (2007) Equivalent homogeneous variable depth beams for cracked FGM beams;Compliance approach. In: INTERNATIONAL JOURNAL OF FRACTURE, 144 (3). pp. 209-213.

Uyyuru, RK and Kailas, Satish V (2006) Numerical analysis of friction stir welding process. In: Journal of Materials Engineering and Performance, 15 (5). pp. 505-518.

Uyyuru, RK and Surappa, MK and Brusethaug, S (2007) Tribological behavior of $Al-Si/SiC_p$ composites/automobile brake pad system under dry sliding conditions. In: Tribology International, 40 (2). pp. 365-373.

V

VH, Gupta (1996) A proof of the convergence of the segmentation approach used in analysis of one-dimensional linear systems. In: The Journal of the Acoustical Society of America, 99 (4). 1862- 1867.

Vamsikanth, M and Munjal, ML (2008) Prediction of the effective loss factor of the acoustically lagged pipes. In: NSA-2008, Visakhapatnam.

Vanimisetti, Sampath K and Narasimhan, R (2007) A numerical analysis of flexure induced cylindrical cracks during indentation of thin hard films on soft substrates. In: Thin Solid Films, 515 (6). pp. 3277-3282.

Vanimisetti, Sampath K and Narasimhan, R (2006) A numerical analysis of spherical indentation response of thin hard films on soft substrates. In: International Journal of Solids and Structures, 43 (20). pp. 6180-6193.

Varatharajan, K and Dash, S and Arunkumar, A and Nithya, R and Tyagi, AK and Raj, Baldev (2003) Synthesis of nanocrystalline alpha-Al2O3 by ultrasonic flame pyrolysis. In: Materials Research Bulletin, 38 (4). pp. 577-583.

Varma, AK and Soundranayagam, S (2014) Experimental study of a small partial admission axial turbine with low aspect ratio blade. In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 228 (1). pp. 20-34.

Varma, N Siva Prasad and Narasimhan, R (2008) A numerical study of the effect of loading conditions on tubular hydroforming. In: Journal of Materials Processing Technology, 196 (1-3). 174 -183.

Varughese, Sunil and Kiran, MSRN and Ramamurty, Upadrasta and Desiraju, Gautam R (2013) Nanoindentation in Crystal Engineering: Quantifying Mechanical Properties of Molecular Crystals. In: ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 52 (10). pp. 2701-2712.

Velasco, S and Santos, MJ and White, JA and Srinivasan, K (2013) The curvature of the liquid-vapor reduced pressure curve and its relation with the critical region. In: JOURNAL OF CHEMICAL THERMODYNAMICS, 60 . pp. 41-45.

Velasco, Santiago and White, Juan A and Srinivasan, Kandadai and Dutta, Pradip (2012) Waring and Riedel Functions for the Liquid-Vapor Coexistence Curve. In: Industrial & Engineering Chemistry Research, 51 (7). pp. 3197-3202.

Ven, Dr.-Ing and Havemann, HA and Narasimhan, TL (2008) Leistungssteigerung durch das Vergaster-Diesel-Verfahren, mit-Alkohol. In: Journal of the Indian Institute of Science, 88 (3). pp. 840-845.

Venkata Reddy, P and Narasimham, GSVL (2008) Natural convection in a vertical annulus driven by a central heat generating rod. In: International Journal of Heat and Mass Transfer, 51 (19-20). pp. 5024-5032.

Venkatesh, C and Pati, Shashidhar and Bhat, Navakanta and Pratap, Rudra (2005) A torsional MEMS varactor with wide dynamic range and low actuation voltage. In: Sensors and Actuators A: Physical, 121 (2). pp. 480-487.

Venkatesh, DN and Shrinivasa, U (1995) Generation of an eight node brick element using Papcovitch-Neuber functions. In: Computers & Structures, 54 (6). pp. 1077-1084.

Venkatesh, DN and Shrinivasa, U (1996) Plate bending with hexahedral PN elements. In: Computers and Structures, 60 (4). pp. 635-641.

Venkatesh, DN and Shrinivasa, U (1994) Solid finite elements through three decades. In: Sadhana : Academy Proceedings in Engineering Sciences, 19 (part 2). pp. 271-287.

Venkatesh, K and Bobji, MS and Biswas, SK (1999) Power spectra of roughness caused by grinding of metals. In: Journal of Materials Research, 14 (2). pp. 319-322.

Venkatesh, K and Bobji, MS and Biswas, SK (1998) Roughness due to workpiece wear generated in surface grinding of metals. In: Tribology International, 31 (12). pp. 771-778.

Venkatesh, K and Bobji, MS and Biswas, SK (1998) Some features of surface topographical power spectra generated by conventional machining of a ductile metal. In: Materials Science and Engineering A, 252 (1). pp. 153-155.

Venkatesh, K and Bobji, MS and Gargi, R and Biswas, SK (1999) Genesis of workpiece roughness generated in surface grinding and polishing of metals. In: Wear, 225-22 (1). pp. 215-226.

Venkatesh, KP and Mohite, SS and Pandey, AK and Pratap, R (2008) Experimental and Computational Studies on the Effect of Complex Air Gap Geometry on Squeeze-film Damping in Perforated MEMS Devices. In: International Conference on Smart Materials, Structures and Systems, Indian Institute of Science, Bangalore, IISc Bangalore.

Venkatesh, KP and Patil, Nishad and Pandey, Ashok Kumar and Pratap, Rudra (2009) Design and characterization of in-plane MEMS yaw rate sensor. In: Sadhana-Academy Proceedings In Engineering Sciences, 34 (4). pp. 633-642.

Venkatesh, KP and Pratap, R (2009) Capturing higher modes of vibration of micromachined resonators. In: International Conference on Modern Practice in Stress and Vibration Analysis (MPSVA 2009), , September 2009, Newhall Cambridge University, UK.

Venkatesh, P and Prasad, CR (1982) Simple period timing device for laser Doppler signals. In: Review of Scientific Instruments, 53 (4). pp. 461-468.

Venkatesh, Prabha and Prasad, CR (1982) Simple period timing device for laser Doppler signals. In: Review of Scientific Instruments, 53 (4). pp. 461-468.

Venkatesh, S (1974) Engine wear and used oil analysis - comparative study in high speed diesel engines. In: Wear, 27 (1). pp. 83-89.

Venkatesh, S (1974) Engine wear and used oil analysis-A comparative study in high speed diesel engines. In: Wear, 27 (1). pp. 83-89.

Venkatesham, B and Munjal, ML (2009) Performance a rectangular duct with absorptive lining on one side and airgap on the opposite side. In: UNSPECIFIED, November 2009, Hyderabad.

Venkatesham, B and Munjal, ML (2006) Tonal noise control by a special acoustic enclosure. In: NSA 2006, 16-17 Nov 2006, NPL, New Delhi.

Venkatesham, B and Munjal, ML and Tiwari, Mayank (2008) Production of break-out noise of a rectangular HVAC duct with acoustic lagging. In: Proc. ICSV15, Daejeon, Korea, Daejeon.

Venkatesham, B and Tiwari, Mayank and Munjal, ML (2010) Analytical prediction of break-out noise from a reactive rectangular plenum with four flexible walls. In: Journal of the Acoustical Society of America, 128 (4). pp. 1789-1799.

Venkatesham, B and Tiwari, Mayank and Munjal, ML (2008) Analytical prediction of the breakout noise from a rectangular cavity with one compliant wall. In: Journal of the Acoustical Society of America, 124 (5). pp. 2952-2962.

Venkatesham, B and Tiwari, Mayank and Munjal, ML (2009) Four-pole Parameters of a rectangular expansion chamber with yielding walls. In: The Sixteenth International Conference on Sound and Vibration (ICSV16), July 2009.

Venkatesham, B and Tiwari, Mayank and Munjal, ML (2008) Free vibration analysis of coupled acoustic structural systems. In: Proc. IC-ICAME.

Venkatesham, B and Tiwari, Mayank and Munjal, ML (2011) Prediction of Breakout Noise from a Rectangular Duct with Compliant Walls. In: International Journal of Acoustics and Vibration, 16 (4). pp. 180-190.

Venkatesham, B and Tiwari, Mayank and Munjal, ML (2009) Transmission loss analysis of rectangular expansion chamber with arbitrary location of inlet/outlet by means of Green's functions. In: Journal of Sound and Vibration, 323 (3-5). pp. 1032-1044.

Venkateshan, SP and Prasad, Krishna K (1979) Radiative interactions in boundary layers. In: Journal of Fluid Mechanics, 90 (JAN). pp. 33-66.

Venukumar, S and Muthukumaran, S and Yalagi, SwaroopG and Kailas, SatishV (2014) Failure modes and fatigue behavior of conventional and refilled friction stir spot welds in AA 6061-T6 sheets. In: INTERNATIONAL JOURNAL OF FATIGUE, 61 . pp. 93-100.

Venukumar, S and Yalagi, SG and Muthukumaran, S and Kailas, SV (2014) Static shear strength and fatigue life of refill friction stir spot welded AA 6061-T6 sheets. In: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 19 (3). pp. 214-223.

Verma, Nisha and Cadambi, Sumanth and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) Micromechanisms of damage nucleation during contact deformation of columnar multilayer nitride coatings. In: ACTA MATERIALIA, 60 (6-7). pp. 3063-3073.

Verneker, Venkatesh Pai R and Myneni, Saini and Rao, Josyula Mohana R (1985) Effect of Prior Gamma Irradiation on Thermal Decomposition, Ignition and Combustion of Coal. In: Combustion Science and Technology, 44 (1-2). pp. 97-102.

Vijayasree, NK and Munjal, ML (2012) On an Integrated Transfer Matrix method for multiply connected mufflers. In: Journal of Sound and Vibration, 331 (8). pp. 1926-1938.

Vikas, D and Basu, S and Dutta, P (2012) In-situ measurements of concentration and temperature during transient solidification of aqueous solution of ammonium chloride using laser interferometry. In: International Journal of Heat and Mass Transfer, 55 (7-8). pp. 2022-2034.

Vinod Kumar, BM and Badige, DK and Hegde, S and Ananthasuresh, GK (2009) An Improved Compact Compliant Mechanism for an External Pipe-Crawler. In: 14th National Conference on Machines and Mechanisms (NaCoMM-09), December 17-18, 2009, NIT-Durgapur, India.

Viswanath, B and Raghavan, R and Ramamurty, U and Ravishankar, N (2007) Mechanical properties and anisotropy in hydroxyapatite single crystals. In: Scripta Materialia, 57 (4). pp. 361-364.

Viswanathan, NN and Srinivasan, MN and Lahiri, AK (1997) Mathematical modelling of divided blast cupola. In: Steel Research, 68 (5). pp. 192-197.

Viswanathan, NN and Srinivasan, MN and Lahiri, AK (1998) Process simulation of cupola. In: ISIJ International, 38 (10). pp. 1062-1068.

Viswanathan, NN and Srinivasan, MN and Lahiri, AK (1997) Steady state three-dimensional mathematical model for cupola. In: Ironmaking and Steelmaking, 24 (6). 476-483 .

Von, Dr-Ing and Havemann, HA and Narasimhan, TL (2008) Verbrennung and Vergasung Schwerer flussiger Kraftstoffe Einer Wirbelkammer. In: Journal of the Indian Institute of Science, 88 (3). pp. 833-839.

W

Wahi, P and Stepan, G and Chatterjee, Anindya (2007) Self-interrupted regenerative turning. In: IUTAM Symposium on Dynamics and Control of Nonlinear Systems with Uncertainty, SEP 18-22, 2006, NETHERLANDS.

Wahi, Pankaj and Chatterjee, Anindya (2005) Asymptotics for the Characteristic Roots of Delayed Dynamic Systems. In: Journal of Applied Mechanics:Transactions of The ASME, 72 (4). pp. 475-483.

Wahi, Pankaj and Chatterjee, Anindya (2004) Averaging Oscillations with Small Fractional Damping and Delayed Terms. In: Nonlinear Dynamics, 38 (1-2). pp. 3-22.

Wahi, Pankaj and Chatterjee, Anindya (2005) Galerkin Projections for Delay Differential Equations. In: Transactions of the ASME: Journal of Dynamic Systems, Measurement, and Control, 127 (1). pp. 80-87.

Wahi, Pankaj and Chatterjee, Anindya (2005) Regenerative Tool Chatter Near a Codimension 2 Hopf Point Using Multiple Scales. In: Nonlinear Dynamics, 40 (4). pp. 323-338.

Wahi, Pankaj and Chatterjee, Anindya (2008) Self-interrupted regenerative metal cutting in turning. In: International Journal of Non-Linear Mechanics, 43 (2). pp. 111-123.

Wang, JJ and Lockwood, AJ and Peng, Y and Xu, X and Bobji, MS and Inkson, BJ (2009) The formation of carbon nanostructures by in situ TEM mechanical nanoscale fatigue and fracture of carbon thin films. In: Nanotechnology, 20 (30). p. 305703.

Williamson, CHK and Govardhan, R (2004) Vortex-induced vibrations. In: Annual Review Of Fluid Mechanics, 36 . pp. 413-455.

Williamson, CHK and Govardhan, R (2008) A brief review of recent results in vortex-induced vibrations. In: Journal of Wind Engineering and Industrial Aerodynamics, 96 (6-7). pp. 713-735.

X

Xu, Dong and Ananthasuresh, GK (2003) Freeform Skeletal Shape Optimization of Compliant Mechanisms. In: jounal of Mechanical Design, 125 (2). pp. 253-261.

Y

Yadav, Anil and Pathak, Nitin and Kumar, Arvind and Dutta, Pradip and Sarkar, Supriya (2009) Effects of the filling process on the evolution of the mushy zone and macrosegregation in alloy casting. In: Modelling and Simulation in Materials Science and Engineering, 17 (3). pp. 1-19.

Yadav, Arti and Pendyala, Prashant and Bobji, MS (2014) On Using Nanoporous Alumina Films as Tribological Coating. In: International Conference on Advances in Tribology and Engineering Systems (ICATES), October 15-17, 2013, Ahmedabad, Gujarath, pp. 403-409.

Yogananda, CV (1969) Influence lines for bending under a ring load of a free shell, a shell embedded in a soft medium and a shell containing a soft core. In: Acta Mechanica, 7 (4). pp. 299-310.

Yogananda, CV (1967) Interface stresses in a composite cylindrical shell under ring loading. In: Nuclear Engineering and Design, 6 (5). pp. 421-430.

Yogananda, CV (1966) Ring loading of a long, thin, circular cylindrical shell enclosing a soft, solid core: A recalculation by the love function method of elasticity. In: International Journal of Mechanical Sciences, 8 (12). pp. 751-757.

Yogananda, CV (1967) A symmetric solution for a cylindrical shell enclosed in an elastic casing. In: International Journal of Engineering Science, 5 (9). pp. 681-688.

This list was generated on Sun Nov 23 10:48:43 2014 IST.