ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Items where Subject is "Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators Name | Item Type
Jump to: * | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 2404.

*

*, Ramani and Sathyavathiamma, MP and Puttaswamy, NG and Mallya, RM (1984) Mossbauer effect studies of the thermal decomposition of iron(II) oxalate in hydrogen. In: Materials Chemistry and Physics, 9 (6). pp. 539-559.

*, Shrihari and Kumar, R and Gandhi, KS and Natarajan, KA (1991) Role of cell attachment in leaching of chalcopyrite mineral by Thiobacillus ferrooxidans. In: Applied Microbiology and Biotechnology, 36 (2). pp. 278-282.

A

Aashia, R and Madhav, KV and Ramamurty, U and Asokan, S (2009) Nanoindentation study on germania-doped silica glass preforms: evidence for the compaction-densification model of photosensitivity. In: Optics Letters, 34 (16). pp. 2414-2416.

Abinandanan, TA (1997) Computer modelling of elastic stress effects during precipitation. In: India-Japan Seminar on New Materials, 21-22 Oct. 1996, Hyderbad, India, pp. 901-908.

Abinandanan, TA and Haider, F and Martin, G (1994) Monte Carlo simulations of precipitation of $L1_2$. In: Proceedings of an International Conference on Solid-Solid Phase Transformations, 17-22 July 1994, Framington, PA, USA, pp. 443-448.

Abinandanan, TA and Haider, F and Martin, G (1995) Phase transformations involving ordering and phase separation: a Monte Carlo study. In: Non Linear Phenomena in Materials Science III. Instabilities and Patterning. Indo-French Workshop on Instabilities and Patterning and of the International Meeting on Non Linear Phenomena in Materials Science, Dec. 1994, Switzerland, pp. 87-95.

Abinandanan, TA and Raju, AP and Rajesh, M (1999) Monte Carlo study of precipitation of two phases in a ternary alloy. In: Proceedings of the International Conference on Solid-Solid Phase Transformations '99, 24-28 May 1999, Kyoto, Japan, pp. 753-756.

Abinandanan, TA and Sankarasubramanian, R and Jog, CS (1999) Equilibrium shapes of coherent, misfitting precipitate. In: Proceedings of the International Conference on Solid-Solid Phase Transformations '99, 24-28 May 1999, Kyoto, Japan, pp. 541-544.

Abinandanan, TA (1995) On the spurious increase in particle volume fraction during coarsening simulations. In: Philosophical Magazine Letters, 71 (4). pp. 229-235.

Abinandanan, TA and Haider, F (2001) An extended Cahn-Hilliard model for interfaces with cubic anisotropy. In: Philosophical Magazine A & B, 81 (10). pp. 2457-2479.

Abinandanan, TA and Haider, F and Martin, G (1998) Computer simulations of diffusional phase transformations: Monte Carlo algorithm and application to precipitation of ordered phases. In: Acta Materialia, 46 (12). pp. 4243-4255.

Abinandanan, TA and Johnson, WC (1995) Development of spatial correlations during coarsening. In: of the Indo-US Workshop on Nucleation and Growth in Solids, 14-16 March 1994, Bangalore, India, pp. 169-176.

Acharya, S and Hajra, JP (2005) Activities of Al in the Al + Ga + Bi + Sb system in the temperature range (1173 to 1323) K. In: The Journal of Chemical Thermodynamics, 37 (2). pp. 169-174.

Acharya, S and Hajra, JP (2004) Applicability of a multiparameter formalism in interpreting the thermodynamic behaviour of ternary systems. In: Transactions of the Indian Institute of Metals, 57 (2). pp. 95-102.

Acharya, S and Hajra, JP (2005) Thermodynamic modelling of phase equilibria in Al-Ga-P-As system. In: Bulletin of Materials Science, 28 (2). pp. 179-185.

Acharya, S and Hajra, JP (2004) Thermodynamics and phase equilibria in the Al–Bi–Sb system. In: The Journal of Chemical Thermodynamics, 36 (7). pp. 583-591.

Acharya, S and Hajra, JP and Aldinger, Fritz (2004) Study of the solid–liquid equilibria in the Ga–In–As–Sb system at 973 and 1073K. In: Materials Chemistry and Physics, 87 (1). pp. 127-133.

Ahamad, M Niyaz and Varma, KBR (2009) Optical Properties of Nanocrystalline Potassium Lithium Niobate in the Glass System (100-x) TeO2-x(1.5K(2)O-Li2O-2.5Nb(2)O(5)). In: Journal of Nanoscience and Nanotechnology, 9 (8). pp. 4910-4917.

Ahamad, MN and Varma, KBR (2010) Structural and optical properties of (100-x)Li2B4O7 center dot x(Ba5Li2Ti2Nb8O30) glasses and glass nanocrystal composites. In: Dalton Transactions (2003), 39 (19). pp. 4624-4630.

Ahuja, S and Kutty, TRN (1996) Nanoparticles of SrTiO3 prepared by gel to crystallite conversion and their photocatalytic activity in the mineralization of phenol. In: Journal of Photochemistry and Photobiology A: Chemistry, 97 (1-2). 99-107 .

Ajikumar, PK and Kamruddin, M and Shankar, P and Gouda, Ramakrishna and Balamurugan, AK and Nithya, R and Tyagi, AK and Jayaram, V and Biswas, SK and Raj, Baldev (2009) Internal nitride formation during gas-phase thermal nitridation of titanium. In: Scripta Materialia, 61 (4). pp. 403-406.

Akila, R and Jacob, KT and Shukla, AK (1987) Gibbs energies of formation of rare earth oxysulfides. In: Metallurgical and Materials Transactions B, 18 (1). pp. 163-168.

Akila, R and Jacob, KT (1987) Combined homo-hetero doping for enhancement of ionic conductivity. In: Solid State Ionics, 25 (2-3). pp. 217-221.

Akila, R and Jacob, KT (1988) High temperature stability of oxysulfides containing Ce3+ and Y3+ ions. In: Ceramics International, 14 (3). pp. 147-152.

Akila, R and Jacob, KT (1989) An SOx (x = 2, 3) sensor using ?-alumina/Na2SO4 couple. In: Sensors and Actuators, 16 (4). pp. 311-323.

Akila, R and Jacob, KT (1988) Use of the Nasicon/Na2SO4 couple in a solid state sensor for SOx (x=2,3). In: Journal of Applied Electrochemistry, 18 (2). pp. 245-251.

Akila, R and Jacob, KT (1990) The mobility of oxygen ions in CaF2. In: Journal of Applied Electrochemistry, 20 (2). pp. 294-300.

Akila, R and Jacob, KT and Shukla, AK (1987) Standard free energies of formation of rare earth sesquisulphides. In: Journal of Materials Science, 22 (6). pp. 2087-2093.

Al-Samman, Talal and Molodov, Konstantin D and Molodov, Dmitri A and Gottstein, Guenter and Suwas, Satyam (2012) Softening and dynamic recrystallization in magnesium single crystals during c-axis compression. In: Acta Materialia, 60 (2). pp. 537-545.

Alam, Md Zafir and Chatterjee, D and Kamat, SV and Jayaram, V and Das, DK (2010) Evaluation of ductile-brittle transition temperature (DBTT) of aluminide bond coats by micro-tensile test method. In: Materials Science and Engineering A, 527 (26). pp. 7147-7150.

Alam, Md Zafir and Srivathsa, B and Kamat, SV and Jayaram, V and Hazari, N and Das, DK (2010) Mechanism of failure in a free-standing Pt-aluminide bond coat during tensile testing at room temperature. In: Materials Science and Engineering A, 527 (3). pp. 842-848.

Alam, Zafir Md and Chatterjee, Debarati and Muraleedharan, K and Nandy, TK and Kamat, SV and Jayaram, V and Das, DK (2011) Effect of Strain Rate on Ductile-to-Brittle Transition Temperature of a Free-Standing Pt-Aluminide Bond Coat. In: Metallurgical and Materials Transactions A, 42 (6). pp. 1431-1434.

Alam, Zafir Md and Srivathsa, B and Kamat, SV and Jayaram, V and Das, DK (2011) Microtensile testing of a free-standing Pt-aluminide bond coat. In: Materials & Design, 32 (3). pp. 1242-1252.

Alaneme, KK and Hong, SM and Sen, Indrani and Fleury, E and Ramamurty, U (2010) Effect of copper addition on the fracture and fatigue crack growth behavior of solution heat-treated SUS 304H austenitic steel. In: Materials Science and Engineering: A, 527 (18-19). pp. 4600-4604.

Alaneme, KK and Ramamurty, U and Bello, O (2013) Hardening and corrosion behaviour of copper added SUS 304H austenitic steels subjected to thermal cycling. In: Kovove materialy - Metallic Materials, 51 (1). pp. 25-30.

Alaneme, Kenneth Kanayo (2011) Influence of Tempered Microstructures on the Transformation Behaviour of Cold Deformed and Intercritically Annealed Medium Carbon Low Alloy Steel. In: Materials Research, 13 (2). pp. 203-209.

Alcock, CB and Jacob, KT (1974) Reply to ‘Variation of the excess chemical potential with atom fraction of polyvalent solute in alloys of copper, silver and gold. In: Scripta Metallurgica, 8 . pp. 1389-1394.

Alcock, CB and Jacob, KT (1977) Solubility and activity of oxygen in liquid gallium and gallium copper alloys. In: Journal of the Less Common Metals, 53 (2). pp. 211-222.

Alcock, CB and Jacob, KT (1974) Solute solute and solvent solute interactions in solid solutions of Cu+Sn, Au+Sn and Cu+Au+Sn alloys. In: Acta Metallurgica, 22 (5). pp. 539-544.

Alcock, CB and Jacob, KT and Fitzner, K (1977) An entropy meter based on the thermoelectric potential of a nonisothermal solid electrolyte cell. In: The Journal of Chemical Thermodynamics, 9 (11). pp. 1011-1020.

Alcock, CB and Palamutçu, T and Jacob, KT (1973) Thermodynamics of solid solutions of silver with indium and tin. In: Acta Metallurgica, 21 (7). 1003-1009 .

Alcock, CB and Zador, S and Jacob, KT (1976) Zirconium: Physico chemical properties of its compounds and alloys. In: UNSPECIFIED, 1976, Vienna.

Allen, CM and Kumar, S and Cama, H and O'Reilly, KAQ and Carroll, L (2001) Electron beam surface melting of model 1200 Al alloys. In: Materials Science and Engineering: A, 304-6 . pp. 604-607.

Allibert, M and Lourtau, R and Jacob, KT and Chatillon, C (1981) Mass spectrometric and electrochemical studies of thermodynamic properties of liquid and solid phases in the CaO Al2O3 system. In: Journal of the American Ceramic Society, 64 (5). pp. 307-314.

Alok, Singh and Ranganathan, S (1994) Rational approximants to the decagonal phase in Al-Mn-M (M=Ni,Cu,Zn) systems. In: Eighth International Conference on Rapidly Quenched and Metastable Materials, 22-27 Aug. 1993, Sendai, Japan, pp. 754-757.

Ambat, R and Dwarakadasa, ES (1994) Studies on the influence of chloride ion and pH on the electrochemical behaviour of aluminium alloys 8090 and 2014. In: Journal of Applied Electrochemistry, 24 (9). pp. 911-916.

Ambat, R and Prasad, Krishna R and Dwarakadasa, ES (1995) The influence of aging at $180^o\hspace{2mm}C$ on the corrosion behaviour of a ternary Al---Li---Zr alloy. In: Corrosion Science, 37 (8). pp. 1253-1265.

Ambat, Rajan and Dwarakadasa, ES (1992) The influence of pH on the corrosion of medium strength aerospace alloys 8090, 2091 and 2014. In: Corrosion Science, 33 (5). pp. 681-690.

Anand, K and Kishore, * (1983) On the wear of aluminium-corundum composites. In: Wear., 85 (2). pp. 163-169.

Anand, K and Kishore, * (1983) On the wear of aluminium-corundum composites. In: Wear, 85 (2). pp. 163-169.

Anand, Phalguni and Modak, Jayant M and Natarajan, KA (1996) Biobeneficiation of bauxite using Bacillus polymyxa: calcium and iron removal. In: International Journal of Minral Processing, 48 (1-2). pp. 51-60.

Anandh, Subramaniam and Ranganathan, S (2001) Modulated structures, nanocrystals and quasicrystals in Mg-Zn-Y alloys. In: Quasicrystals - Preparation, Properties and Applications. Symposium, 27-30 Nov. 2000, Boston, MA, USA, K4.4.1-K4.4.7.

Anandhakumar, S and Debapriya, M and Nagaraja, V and Raichur, Ashok M (2011) Polyelectrolyte microcapsules for sustained delivery of water-soluble drugs. In: Materials Science and Engineering: C, 31 (2). pp. 342-349.

Anandhakumar, S and Mahalakshmi, V and Raichur, Ashok M (2012) Silver nanoparticles modified nanocapsules for ultrasonically activated drug delivery. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 32 (8). pp. 2349-2355.

Anandhakumar, S and Nagaraja, V and Raichur, Ashok M (2010) Reversible polyelectrolyte capsules as carriers for protein delivery. In: Colloids and Surfaces B: Biointerfaces, 78 (2). pp. 266-274.

Anandhakumar, S and Raichur, Ashok M (2011) PSS-doped nanostructured polyelectrolyte capsules for delivery of proteins. In: Abstracts of Papers - American Chemical Society, National Meeting, 242 .

Anandhakumar, S and Raichur, Ashok M (2013) Polyelectrolyte/silver nanocomposite multilayer films as multifunctional thin film platforms for remote activated protein and drug delivery. In: ACTA BIOMATERIALIA, 9 (11). pp. 8864-8874.

Anandhakumar, S and Raichur, Ashok M (2011) A facile route to synthesize silver nanoparticles in polyelectrolyte capsules. In: Colloids and Surfaces B: Biointerfaces, 84 (2). pp. 379-383.

Anandhakumar, S and Vijayalakshmi, SP and Jagadeesh, G and Raichur, Ashok M (2011) Silver Nanoparticle Synthesis: Novel Route for Laser Triggering of Polyelectrolyte Capsules. In: ACS Applied Materials & Interfaces, 3 (9). pp. 3419-3424.

Ananthanarayanan, L and Lahiri, AK (1992) An ADI enthalpy method for two dimensional solidification. In: International Communications in Heat and Mass Transfer, 19 (5). pp. 629-637.

Ananthasivan, K and Kaliappan, I and Anthonysamy, S and Chandramouli, V and Rao, PRV and Mathews, CK and Jacob, KT (1996) Gibbs energies of formation of UMoC1.7 and UMoC2. In: Journal of Alloys and Compounds, 245 (1-2). pp. 40-46.

Ananthasivan, K and Kaliappan, I and Anthonysamy, S and Rao, PRV and Mathews, CK and Jacob, KT (1997) Stabilities of ternary carbides UWC1.75 and UWC2. In: High Temperature Materials and Processes, 16 (4). 255-260 .

Ananthasivan, K and Rao, Vasudeva PR and Mathews, CK and Jacob, KT and Chandramouli, V and Kaliappan, I and Anthonysamy, S (1994) Carbon potential measurements on some actinide carbides. In: UNSPECIFIED, 1994, The Minerals, Metals & Materials Society.

Ananthraj, S and Varma, KBR and Rao, KJ (1988) Electrical properties of silver pyrophosphate glass. In: Solid State Ionics, 27 (1-2). pp. 5-9.

Andrade, UR and Meyersa, MA and Chokshi, AH (1994) Constitutive description of work- and shock-hardened copper. In: Scripta metallurgica et materialia, 30 (7). pp. 933-938.

Anilchandra, AR and Surappa, MK (2010) Influence of tool rake angle on the quality of pure magnesium chip-consolidated product. In: Journal of Materials Processing Technology, 210 (3). pp. 423-428.

Anilchandra, AR and Surappa, MK (2012) Microstructure and damping behaviour of consolidated magnesium chips. In: Materials Science and Engineering: A, 542 . pp. 94-103.

Anilchandra, AR and Surappa, MK (2013) Microstructure and tensile properties of consolidated magnesium chips. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 560 . 759-766.

Anilchandra, Adamane R and Basu, Ritwik and Samajdar, Indradev and Surappa, Mirle K (2012) Microstructure and compression behavior of chip consolidated magnesium. In: JOURNAL OF MATERIALS RESEARCH, 27 (4). pp. 709-719.

Anthonysamy, S and Ananthasivan, K and Kaliappan, I and Chandramouli, V and Rao, PRV and Mathews, CK and Jacob, KT (1996) Gibbs energies of formation of chromium carbides. In: Metallurgical and Materials Transactions A, 27 (7). pp. 1919-1924.

Anthonysamy, S and Ananthasivan, K and Kaliappan, I and Chandramouli, W and Rao, Vasudeva PR and Mathews, CK and Jacob, KT (1995) Chemical potential of carbon in the system U-Pu-C-O-N: Measurements and calculation. In: Journal of Nuclear Materials, 223 (1). pp. 20-27.

Anuradha, TV (2010) Template-Assisted Sol-Gel Synthesis of Nanocrystalline BaTiO3. In: E-Journal of Chemistry, 7 (3). pp. 894-898.

Anuradha, TV and Ranganathan, S (2007) Nanocrystalline $TiO_2$ by three different synthetic approaches: A comparison. In: Bulletin of Materials Science, 30 (3). pp. 263-269.

Anuradha, TV and Ranganathan, S (1999) Synthesis of mesoporous materials based on titanium(IV)oxide and titanium nitride. In: Nanostructured Materials, 12 (5-8). pp. 1063-1069.

Anuradha, TV and Ranganathan, S and Mimani, T and Patil, KC (2001) Combustion synthesis of nanostructured barium titanate. In: Scripta Materialia, 44 (8-9). pp. 2237-2241.

Aoki, K and Li, XG and Chattopadhyay, K and Masumoto, T (1988) Hydrogen-induced amorphization in intermetallic compound Zr3In. In: Scripta Metallurgica, 22 (7). pp. 991-994.

Aoki, K and Yanagitani, A and Masumoto, T and Chattopadhyay, K (1989) Formation and crystallization of hydrogen-induced amorphous SmFe2H3.6 alloy. In: Journal of the Less Common Metals, 147 (1). pp. 105-111.

Aradhya, KSS and Surappa, MK (1991) Estimation of mechanical properties of 6061 Al---SiCp composites using finite element method. In: Scripta Metallurgica et Materialia, 25 (4). 817-822 .

Armstronga, RW and Prasad, YVRK (1974) Polycrystal versus single-crystal strain rate sensitivity of cadmium. In: Philosophical Magazine, 29 (6). pp. 1421-1425.

Arora, PR and Raghavan, MR and Prasad, YVRK (1988) Effect of Prestrain on Fracture Toughness of Rolled Mild Steel with Significant Inclusion Content. In: Journal of Testing and Evaluation, 16 (3). 298 -304.

Arora, PR and Raghavan, MR and Prasad, YVRK (1988) Effect of prestrain on fatigue crack propagation in mild steel containing non-metallic inclusions. In: Engineering Fracture Mechanics, 29 (1). 67 -79.

Arul Selvan, K and Bobji, MS (2012) Extentional characteristics of a liquid filament with dispersed nanoparticles. In: International Conference on Nanoscience and Technology (ICONSAT - 2012), January 20 to 23, 2012, Hyderabad, India.

Arul Varman, K and Mishra, Deepak K and Rajan, Kirtana M and Mallya, Ashwini N and Ramamurthy, Praveen C (2012) Organic device electrode fabricated by aluminum in nanopowder and bulk form and effect on device properties. In: 2012 International Conference on Emerging Electronics (ICEE), 15-17 Dec. 2012, Mumbai.

Ashamol, A and Priyambika, VS and Avadhani, GS and Sailaja, RRN (2013) Nanocomposites of crosslinked starch phthalate and silane modified nanoclay: Study of mechanical, thermal, morphological, and biodegradable characteristics. In: Starch - Stärke, 65 (5-6). pp. 443-452.

Asokan, T and Iyengar, GNK and Nagabhushana, GR (1987) Influence of process variables on microstructure and V-I characteristics of multicomponent zinc oxide-based nonlinear resistors. In: Journal of the American Ceramic Society, 70 (9). pp. 643-650.

Asokan, T (1987) Effects Of Dopants Distribution On The Non-Linear Properties Of A Zno-Based Non-Linear Resistor. In: Transactions and Journal of the British Ceramic Society, 86 (6). pp. 187-189.

Asokan, T and Iyengar, GNK and Nagabhushana, GR (1987) Influence of additive oxides on the electrical characteristics of ZnO-based composites. In: Transactions and Journal of the British Ceramic Society, 86 (6). 190 -193.

Asokan, T and Iyengar, GNK and Nagabhushana, GR (1988) Inhomogeneity in sintered ZnO based non-linear resistors. In: Ceramics International, 14 (1). 35 -41.

Asokan, T and Iyengar, GNK and Nagabhushana, GR (1987) Non-ohmic behaviour of the binary ZnO-Nb2O5 system. In: Journal of Materials Science, 22 (3). pp. 1019-1023.

Asokan, T and Iyengar, GNK and Nagabhushana, GR (1987) Studies on microstructure and density of sintered ZnO-based non-linear resistors. In: Journal of Materials Science, 22 (6). pp. 2229-2236.

Asokan, T and Nagabhushana, GR and Iyengar, GNK (1988) Improvement of Non-Linear Characteristics of Multicomponent ZnO-based Ceramics Containing ${Nb}_2O_5$. In: IEEE Transactions on Electrical Insulation, 23 (2). pp. 279-286.

Asuvathraman, R and Rajagopalan, S and Ananthasivan, K and Mathews, CK and Mallya, RM (1995) Surface studies on uranium monocarbide using XPS and SIMS. In: Journal of Nuclear Materials, 224 (1). 25-30 .

Aswathy, B and Avadhani, GS and Sumithra, IS and Suji, S and Sony, G (2011) Microwave assisted synthesis and UV-Vis spectroscopic studies of silver nanoparticles synthesized using vanillin as a reducing agent. In: Journal of Molecular Liquids, 159 (2). pp. 165-169.

Atul H, Chokshi (2011) To Bt or not? In: pp. 624-626.

Avadhani, GS (2003) Optimization of Process Parameters for the Manufacturing of Rocket Casings: A Study Using Processing Maps. In: Journal of Materials Engineering and Performance, 12 (6). pp. 609-622.

Ayappa, KG and Kamala, CR and Abinandanan, TA (1999) Mean field lattice model for adsorption isotherms in zeolite NaA. In: Journal of Chemical Physics, The, 110 (17). pp. 8714-8721.

Azad, AM and Jacob, KT and Sreedharan, OM (1991) Gibbs’ energy of formation of YBa2Cu3O7-x (tetragonal). In: Bulletin of Materials Science, 14 (4). pp. 983-987.

Azeem, MA and Kumar, AK and Mondal, S (2005) Creep behaviour of short fibre reinforced QE22 magnesium alloy using impression creep test. In: 4th Conference on Creep, Fatique and Creep-Fatique Internation, OCT 08-10, 2003, Kalpakkam, INDIA.

Azeem, MA and Shortall, C and Ramamurty, U (2007) Tensile properties of stainless steel sandwich sheets with fibrous cores. In: Scripta Materialia, 57 (3). pp. 221-224.

Azeem, MA and Tewari, A and Mishra, S and Gollapudi, S and Ramamurty, U (2010) Development of novel grain morphology during hot extrusion of magnesium AZ21 alloy. In: Acta Materialia, 58 (5). pp. 1495-1502.

Azeem, MA and Tewari, A and Ramamurty, U (2010) Effect of recrystallization and grain growth on the mechanical properties of an extruded AZ21 Mg alloy. In: Materials Science and Engineering A, 527 (4-5). pp. 898-903.

B

Babu, Ramesh (1986) Studies on drop formation at conical tips - a theoretical approach. In: Proceedings of International Conference on `Progress in metallurgical research: fundamental and applied aspects, IIT-Kanpur, p. 279-87, pp. 4918-4927.

Babu, Ramesh S (1986) Experimental Studies on Drop Formation at the Tip of Melting Rods. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 17 (3). pp. 471-477.

Babu, Ramesh S (1986) An absolute method for the determination of surface tension of liquids using pendent drop profiles. In: Bulletin of Materials Science, 90 (18). 4337 -4340.

Babu, Prasath R and Karthikeyan, S (2013) Effect of stress orientation on microstructural evolution during creep of near-lamellar Ti-47Al-2Cr-2Nb. In: Materials Science and Engineering: A, 564 . pp. 218-231.

Babu, Ramesh S (1987) Alternative methods for the determination of surface tension using drop-weight data. In: Journal of Colloid and Interface Science, 115 (2). pp. 551-554.

Babu, Ramesh S (1987) Analysis of drop formation at conical tips : 1. Theory. In: Journal of Colloid and Interface Science, 116 (2). pp. 350-356.

Babu, V and Padaikathan, P (2002) Structure and hard magnetic properties of barium hexaferrite with and without $La_2O_3$ prepared by ball milling. In: Journal of Magnetism and Magnetic Materials, 241 (1). pp. 85-88.

Bag, A and Ray, KK and Dwarakadasa, ES (1999) Influence of Martensite Content and Morphology on Tensile and Impact Properties of High-Martensite Dual-Phase Steels. In: Metallurgical And Materials Transactions A, 30 (5). pp. 1193-1202.

Bag, Asim and Dwarakadasa, ES and Ray, KK (2001) Influence of martensite content and morphology on the toughness and fatigue behavior of high-martensite dual-phase steels. In: Metallurgical and Materials Transactions A, 32 (9). pp. 2207-2217.

Baheti, Varun A and Ravi, Raju and Paul, Aloke (2013) Interdiffusion study in the Pd-Pt system. In: Journal of Materials Science: Materials in Electronics, 24 (8). pp. 2833-2838.

Baheti, Varun A and Roy, Soumitra and Ravi, Raju and Paul, Aloke (2013) Interdiffusion and the phase boundary compositions in the Co-To system. In: INTERMETALLICS, 33 . pp. 87-91.

Bai, Pramila BN and Biswas, SK (1987) Characterization of dry sliding wear of Al---Si alloys. In: Wear, 120 (1). pp. 61-74.

Baia, Pramila BN and Ramasesh, BS and Surappa, MK (1992) Dry sliding wear of A356-Al-SiCp composites. In: Wear, 157 (2). pp. 295-304.

Bajargan, Govind and Singh , Gaurav and Sivakumar, D and Ramamurty, U (2013) Effect of temperature and strain rate on the deformation behavior and microstructure of a homogenized AZ31 magnesium alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 579 . pp. 26-34.

Bakshi, S and Chattopadhyay, K and Kumar, S (2006) Novel technique of processing functionally graded material in age-hardenable Al-alloys. In: Transactions of the Indian Institute of Metals, 59 (1). pp. 73-84.

Bakshi, S and Kumar, S (2006) Impact and fatigue crack growth behavior of a yield strength graded Al-Zn-Mg alloy. In: Materials Science Forum, 519-521 (part 1). pp. 1539-1544.

Balam, SSK and Dong, HQ and Laurila, T and Vuorinen, V and Paul, A (2011) Diffusion and Growth of the mu Phase (Ni6Nb7) in the Ni-Nb System. In: Metallurgical and Materials Transactions A, 42A (7). pp. 1727-1731.

Balam, SSK and Paul, A (2011) Study of interdiffusion and growth of topologically closed packed phases in the Co-Nb system. In: Journal of Materials Science (full set), 46 (4). pp. 889-895.

Balam, SSK and Ravi, R and Paul, Aloke (2012) Diffusion mechanism in the mu phase in Nb-X (X = Ni, Co, Fe) systems. In: International Conference on Diffusion in Materials (DIMAT 2011), JUL 03-08, 2011 , ICB Lab, Dijon, FRANCE, pp. 497-501.

Balam, Somasurendra Kumar and Paul, Aloke (2010) Interdiffusion Study in the Fe-Nb System. In: Metallurgical and Materials Transactions A, 41A (9). pp. 2175-2179.

Balasubrahmanyam, VV and Prasad, YVRK (2002) Deformation behaviour of beta titanium alloy Ti–10V–4.5Fe–1.5Al in hot upset forging. In: Materials Science and Engineering A, 336 (1-2). pp. 150-158.

Balasubrahmanyam, VV and Prasad, YVRK (2001) Hot deformation mechanisms in metastable beta titanium alloy Ti-10V-2Fe-3Al. In: Materials Science and Technology, 17 (10). pp. 1222-1228.

Balasubramaniam, R and Basu, Bikramjit and Ranganathan, S and Suryanarayana, C and Upadhyaya, Anish (2009) Preface and foreword special issue: Prof T R Anantharaman. In: Journal of Materials Science, 44 (9). pp. 2177-2180.

Bandyopadhyay, A and Ramamurthy, U and Dwarakadasa, ES (1993) Strain localization behaviour of Al-Cu and Al-Li-Cu-Mg-Zr alloys due to cathodic charging. In: Journal of Materials Science Letters, 12 (8). pp. 555-557.

Banerjee, D and Krishnan, RV and Vasu, KI (1978) Transformation microstructures in a Ti-31A1-13Mo alloy. In: Scripta Metallurgica, 12 (1). pp. 27-30.

Banerjee, D and Krishnan, RV and Vasu, KI (1980) A reconsideration of phase relations in the Ti-Al-Mo and Ti-Al systems. In: Metallurgical and Materials Transactions A, 11 (7). pp. 1095-1105.

Banerjee, DK and Krishnan, RV and Vasu, KI (1978) Microstructure and Phase-Relations In the Ti-mo-al System. In: Transactions of the Indian Institute of Metals, 31 (5-6). p. 299.

Banerjee, Dipankar (2011) On substructure in titanium alloy martensites: comment on `Antiphase boundary-like stacking fault in alpha `'-martensite of disordered crystal structure in beta-titanium shape memory alloy'. In: Philosophical Magazine, 91 (16). p. 2078.

Banerjee, Dipankar (2011) On substructure in titanium alloy martensites: comment on ‘Antiphase boundary-like stacking fault in α″-martensite of disordered crystal structure in β-titanium shape memory alloy’. In: Philosophical Magazine, 91 (16). p. 2078.

Banerjee, Dipankar and Williams, JC (2013) Perspectives on Titanium Science and Technology. In: ACTA MATERIALIA, 61 (3). pp. 844-879.

Banerjee, Gayathri N and Banerjee, S and Goswami, R (2004) Observation of pseudo-gap and Kondo behaviour in $Al_{70}Pd_{30-x}Mn_x$ quasicrystals. In: Journal of Non-Crystalline Solids, 334-33 . pp. 388-392.

Banerjee, Gayathri N and Banerjee, S and Goswami, R (2004) Observation of pseudo-gap and Kondo behaviour in Al70Pd30−xMnx quasicrystals. In: 8th International Conference on Quasicrystals, SEP 08-13, 2002, Bangalore, INDIA.

Banerjee, S and Dey, GK and Srivastava, D and Ranganathan, S (1997) Plate-shaped transformation products in zirconium-base alloys. In: Metallurgical and Materials Transactions A, 28 (11). pp. 2201-2216.

Banerjee, S and Goswami, R and Chattopadhyay, K and Raychaudhuri, AK (1995) Structural and electrical transport properties of Al-Cu-Cr quasicrystals. In: Physical Review B: Condensed Matter, 52 (5). 3220-3233 .

Banerjee, S and Raychaudhuri, AK and Goswami, R and Chattopadhyay, K (1997) The low-temperature resistivity and magnetoresistance of icosahedral quasicrystalline Al–Cu–Cr. In: Journal of Physics: Condensed Matter, 9 (31). pp. 6643-6650.

Bankarusamy, V and Kishore, * (1983) Wear of gray cast iron. In: Wear, 86 (1). 173 -175.

Barai, K and Tiwary, CS and Chattopadhyay, PP and Chattopadhyay, K (2012) Synthesis of free standing nanocrystalline Cu by ball milling at cryogenic temperature. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 558 . pp. 52-58.

Barbiéro, Laurent and Neto, José Queiroz Pde and Ciornei, Gilles and Sakamoto, Arnaldo Y and Capellari, Benjamin and Fernandes, Erminio and Valles, Vincent (2002) Geochemistry of water and ground water in the Nhecolandia, Pantanal of Mato Grosso, Brazil: Variability and associated processes. In: Wetlands, 22 (3). 528-540 .

Basavaraj, MG and Gupta, GS (2002) Measurement of axial dispersion coefficient in a packed bed using X-ray. In: Materials and Manufacturing Processes, 17 (5). pp. 683-692.

Basavaraj, MG and Gupta, GS and Naveen, K and Rudolph, V and Bali, R (2005) Local Liquid Holdups and Hysteresis in a 2-D Packed Bed Using X-ray Radiography. In: AIChE Journal, 51 (8). pp. 2178-2189.

Basu, S and Lahiri, AK and Seetharaman, S (2009) Distribution of phosphorus and oxygen between liquid steel and basic oxygen steelmaking slag. In: Revue de Metallurgie, 106 (1). 21+.

Basu, J and Nagendra, N and Li, Y and Ramamurty, U (2003) Microstructure and mechanical properties of a partially crystallized La-based bulk metallic glass. In: Philosophical Magazine, 83 (15). pp. 1747-1760.

Basu, Joysurya and Louzguine, DV and Inoue, A and Ranganathan, S (2002) Nanocrystallisation and Nanoquasicrystallisation in (Ti/Hf)-Zr-(Ni/Cu) Ternary Alloys. In: MRS Proceedings, 754 .

Basu, Joysurya and Louzguine, DV and Inoue, A and Ranganathan, S (2004) Synthesis and devitrification of glassy Zr–Ti–Ni and Zr–Hf–Ni ternary alloys. In: Journal of Non-Crystalline Solids, 334-33 . pp. 270-275.

Basu, Joysurya and Murty, BS and Ranganathan, S (2008) Glass forming ability: Miedema approach to (Zr, Ti, Hf)–(Cu, Ni) binary and ternary alloys. In: Journal of Alloys and Compounds, 465 (1-2). pp. 163-172.

Basu, Joysurya and Ranganathan, S (2003) Bulk metallic glasses: A new class of engineering materials. In: Sadhana-Academy Proceedings in Engineering Sciences, 28 (3-4). pp. 783-798.

Basu, Joysurya and Ranganathan, S (2004) Crystallisation in Al-ETM-LTM-La metallic glasses. In: Intermetallics, 12 (10-11). pp. 1045-1050.

Basu, Joysurya and Ranganathan, S (2004) Crystallisation in Al–ETM–LTM–La metallic glasses. In: Intermetallics, 12 (10-11). pp. 1045-1050.

Basu, Joysurya and Ranganathan, S (2009) Glass forming ability and stability: Ternary Cu bearing Ti, Zr, Hf alloys. In: Intermetallics, 17 (3). pp. 128-135.

Basu, Joysurya and Ranganathan, S (2006) Glass-forming ability and stability of ternary Ni-early transition metal (Ti/Zr/Hf) alloys. In: Acta Materialia, 54 (14). pp. 3637-3646.

Basu, Somnath and Lahiri, Ashok Kumar and Seetharaman, Seshadr (2007) Phosphorus Partition between Liquid Steel and CaO-SiO2-P2O5-MgO Slag Containing Low FeO. In: Metallurgical and Materials Transactions B, 38 (3). pp. 357-366.

Basu, Somnath and Lahiri, Ashok Kumar and Seetharaman, Seshadri (2010) Activity of Ferric Oxide in Steelmaking Slag. In: Metallurgical and Materials Transactions B, 41 (2). pp. 414-419.

Basu, Somnath and Lahiri, Ashok Kumar and Seetharaman, Seshadri (2008) Activity of Iron Oxide in Steelmaking Slag. In: Metallurgical and Materials Transactions B, 39 (3). pp. 447-456.

Basu, Somnath and Lahiri, Ashok Kumar and Seetharaman, Seshadri (2007) Phosphorus Partition between Liquid Steel and $CaO-SiO_2-FeO_x -P_2O_5-MgO$ Slag Containing 15 to 25 Pct FeO. In: Metallurgical and Materials Transactions B, 38 (4). pp. 623-630.

Basu, Somnath and Lahiri, Ashok Kumar and Seetharaman, Seshadri and Halder, Jayanta (2007) Change in Phosphorus Partition during Blowing in a Commercial BOF. In: ISIJ International, 47 (5). pp. 766-768.

Bauri, R and Pancholi, V and Samajdar, I and Surappa, MK (2005) Relating microtexture and dynamic micro hardness in an extruded AA8090 alloy and AA8090-8 vol% $SiC_{p}$ composite. In: Science and Technology of Advanced Materials, 6 (8). pp. 933-938.

Bauri, Ranjit and Surappa, MK (2005) Damping Behavior of $Al-Li-SiC_p$ Composites Processed by Stir Casting Technique. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 36 (3). pp. 667-673.

Bauri, Ranjit and Surappa, MK (2005) Investigations on serrated flow in 8090 Al alloy and 8090 Al-SiCp composites occurring during dynamic ultra low load micro hardness (DUH) indentation. In: Materials Science & Engineering, A, 393 (1-2). pp. 22-26.

Bauri, Ranjit and Surappa, MK (2009) Processing and compressive strength of Al-Li-SiCp composites fabricated by a compound billet technique. In: Journal of Materials Processing Technology, 209 (4). pp. 2077-2084.

Bauri, Ranjit and Surappa, MK (2007) Processing and properties of $Al-Li-SiC_p$ composites. In: Science and Technology of Advanced Materials, 8 (6). pp. 494-502.

Bauri, Ranjit and Surappa, MK (2008) Sliding wear behavior of Al-Li-SiCp composites. In: Wear, 265 (11-12). pp. 1756-1766.

Beausir, Benoit and Biswas, Somjeet and Kim, Dong Ik and Toth, Laszlo S and Suwas, Satyam (2009) Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling. In: Acta Materialia, 57 (17). pp. 5061-5077.

Beausir, Benoit and Fressengeas, Claude and Gurao, Nilesh P and Toth, Laszlo S and Suwas, Satyam (2009) Spatial correlation in grain misorientation distribution. In: Acta Materialia, 57 (18). pp. 5382-5395.

Beyerlein, IJ and Toth, LS and Tome, CN and Suwas, S (2007) Role of twinning on texture evolution of silver during equal channel angular extrusion. In: Philosophical Magazine, 87 (6). pp. 885-906.

Bharathy, Vijai P and Yang, Q and Kiran, MSRN and Rha, JongJoo and Nataraj, D and Mangalaraj, D (2012) Reactive biased target ion beam deposited W-DLC nanocomposite thin films - Microstructure and its mechanical properties. In: DIAMOND AND RELATED MATERIALS, 23 . pp. 34-43.

Bharati, Avanish and Xavier, Priti and Kar, Goutam Prasanna and Madras, Giridhar and Bose, Suryasarathi (2014) Nanoparticle-Driven Intermolecular Cooperativity and Miscibility in Polystyrene/Poly(vinyl methyl ether) Blends. In: JOURNAL OF PHYSICAL CHEMISTRY B, 118 (8). pp. 2214-2225.

Bhargava, NRMR and Samajdar, I and Ranganathan, S and Surappa, MK (1998) Role of cold work and SiC reinforcements on the beta '/beta precipitation in Al-10 pct Mg alloy. In: Metallurgical and Materials Transactions A, 29 (11). pp. 2835-2842.

Bhaskaran, TA and Krishnan, RV and Ranganathan, S (1994) An electron diffraction study of quasicrystals in Ti-37 at% Mn and Ti-24 at% Mn-13 at% Fe alloys. In: Bulletin of Materials Science, 17 (6). 795 -810.

Bhaskaran, TA and Krishnan, RV and Ranganathan, S (1995) On the decomposition of ? phase in some rapidly quenched titanium-eutectoid alloys. In: Metallurgical and Materials Transactions A, 26 (6). 1367-1377 .

Bhaskaran, TA and Seshadri, R and Krishnan, RV and Ranganathan, S (1988) Microstructural study of rapidly solidified titanium eutectoid alloysstar, open. In: Materials Science and Engineering, 98 . pp. 251-255.

Bhat, MV and Vasu, KI (1983) Relevance of microstructure to stress corrosion cracking in aluminum-5% zinc and aluminum-5% copper alloys containing titanium. In: Praktische Metallographie/Practical Metallography, 20 (3). pp. 130-137.

Bhat, MV and Vasu, KI (1983) Strain rate sensitivity of stress corrosion cracking in aluminum-5% copper and aluminum-5% zinc alloys containing titanium. In: Transactions of the Indian Institute of Metals, 36 (2). pp. 101-105.

Bhat, KL and Natarajan, KA and Ramachandran, T (1987) Electroleaching of Zinc leach residues. In: Hydrometallurgy, 18 (3). pp. 287-303.

Bhat, MSN and Surappa, MK and Nayak, Sudhaker HV (1991) Corrosion behaviour of silicon carbide particle reinforced 6061/AI alloy composites. In: Journal of Materials Science, 26 (18). pp. 4991-96.

Bhat, Pushpalatha C and Sathyavathiamma, MP and Puttaswamy, NG and Mallya, RM (1983) Mössbauer studies of the corrosion products of iron formed in aqueous ammonium nitrate solution. In: Corrosion Science, 23 (7). pp. 733-752.

Bhat, Radhakrishna BV and Mahajan, YR and Roshan, HMd and Prasad, YVRK (1992) Processing map for hot working of powder. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (8). pp. 2223-2230.

Bhat, Radhakrishna BV and Mahajan, YR and Roshan, HMd and Prasad, YVRK (1993) Processing maps for hot-working of powder metallurgy 1100 Al-10 vol % SiC-particulate metal-matrix composite. In: Journal of Materials Science (full set), 28 (8). pp. 2141-2147.

Bhat, Soumya S and Waghmare, Umesh V and Ramamurty, U (2013) Pressure induced structural phase transformation in TiN: a first-principles study. In: Journal of Applied Physics, 113 (13). 133507_1-133507_7.

Bhatia, Tania and Chattopadhyay, Kamanio and Jayaram, Vikram (2001) Effect of Rapid Solidification on Microstructural Evolution in $MgO-MgAl_2O_4$. In: Journal of the American Ceramic Society, 84 (8). pp. 1873-1880.

Bhatia, T and Chattopadhyay, K and Jayaram, V (1997) Effect of liquid precursor pyrolysis on phase selection in the $MgO-MgAl_2$$O_4$ system. In: 9th International Conference on Rapidly Quenched and Metastable Materials, AUG 25-30, 1996, BRATISLAVA, SLOVAKIA, pp. 930-937.

Bhatia, Tania and Chattopadhyay, K and Jayaram, Vikram (1997) Effect of liquid precursor pyrolysis on phase selection in the MgO-MgAl2O4 system. In: Ninth International Conference on Rapidly Quenched and Metastable Materials, Aug 25-30, 1996, Bratislava, Slovakia.

Bhatia, Tania and Chattopadhyay, K and Jayaram, Vikram (1999) Segregation in the $MgO-MgAl_{2}O_{4}$ system processed from nitrate precursors. In: Journal of Materials Research, 14 (8). pp. 3319-3327.

Bhatia, Tania and Chattopadhyay, K and Jayaram, Vikram (1999) Segregation in the MgO–MgAl2O4 system processed from nitrate precursors. In: Journal of Materials Research, 14 (8). pp. 3319-3327.

Bhattacharya, P and Chattopadhyay, K (1998) Nucleation behaviour of nanodispersed Pb in SiO2 matrix produced by sol-gel route. In: Material TransactionsJIM, 39 (01). pp. 75-79.

Bhattacharya, Victoria and Chattopadhyay, Kamanio (2007) Phase transformation in nanoscale indium-tin alloy particles embedded in metallic matrices. In: Journal of Nanoscience and Nanotechnology, 7 (6). pp. 1736-1743.

Bhattacharya, P and Bhattacharya, V and Chattopadhyay, K (2002) Morphology and thermal characteristics of nano-sized Pb-Sn inclusions in Al. In: Journal of Materials Research, 17 (11). pp. 2875-2883.

Bhattacharya, P and Bhattacharya, V and Chattopadhyay, K (2002) Morphology and thermal characteristics of nano-sized Pb–Sn inclusions in Al. In: Journal of Materials Research, 17 (11). pp. 2875-2883.

Bhattacharya, P and Bysakh, S and Ishihara, KN and Chattopadhyay, K (2001) New observation on heating Ni-Al multilayers of 10 nm periodicity. In: Scripta Materialia, 44 (8-9). pp. 1831-1835.

Bhattacharya, P and Chattopadhyay, K (1999) Nano $Al_2O_3-Pb$ and $SiO_2-Pb$ cermets by sol-gel technique and the phase transformation study of the embedded Pb particles. In: Nanostructured Materials, 12 (5-8). pp. 1077-1080.

Bhattacharya, P and Chattopadhyay, K (1999) Nano Al2O3-Pb AND SiO2-Pb cermets by sol-gel technique and the phase transformation study of the embedded Pb particles. In: The Fourth International Conference on Nanostructured Materials (NANO '98), JUN 14-19, 1998, Stockholm, Sweden.

Bhattacharya, P and Chattopadhyay, K and Bellon, P and Ishihara, KN (2004) Phase evolution and microtwins in the Ni–Al multilayers upon annealing and laser mixing. In: Materials Science and Engineering A, 375-37 . 1277–1284.

Bhattacharya, P and Ishihara, KN and Chattopadhyay, K (2001) FeAl multilayers by sputtering: heat treatment and the phase evolution. In: Materials Science & Engineering A, 304-30 . pp. 250-254.

Bhattacharya, P and Majumdar, B and Chattopadhyay, K (1999) Nanoscale embedded alloy particles through rapid solidification: the case of Al-Pb-In and Cu-Fe-Si. In: Journal of Electron Microscopy, 48 . pp. 1047-1053.

Bhattacharya, V and Chattopadhyay, K and Ayyub, P (2005) Synthesis, transformation and superconductivity of dual phase In-Sn alloy nanoparticles embedded in an Al matrix. In: Philosophical Magazine Letters, 85 (11). pp. 577-585.

Bhattacharya, Victoria and Bhattacharya, P and Chattopadhyay, K (2002) Study of embedded lead-tin nanoparticles in aluminum matrix. In: Materials Science Forum, 386-3 . pp. 427-432.

Bhattacharya, Victoria and Chattopadhyay, K (2004) Microstructure and wear behaviour of aluminium alloys containing embedded nanoscaled lead dispersoids. In: Acta Materialia, 52 (8). pp. 2293-2304.

Bhattacharya, Victoria and Chattopadhyay, K (2004) Morphology and phase transformation of nanoscaled indium–tin alloys in aluminium. In: Materials Science and Engineering A, 375-37 . pp. 932-935.

Bhattacharya, Victoria and Chattopadhyay, Kamanio (2007) Melting of multiphase nano-scaled particles embedded in Al matrix: Case of Pb–Sn and Bi–Sn alloys. In: Materials Science and Engineering A, 449-45 . pp. 1003-1008.

Bhattacharya, Victoria and Chattopadhyay, Kamanio (2001) Microstructure and Tribological Behaviour of Nano-Embedded AI-Alloys. In: Scripta Materialia, 44 (8-9). pp. 1677-1682.

Bhattacharya, Victoria and Yamasue, E and Ishihara, KN and Chattopadhyay, K (2005) On the origin and stability of the metastable phase in rapidly solidified Sn-Bi alloy particles embedded in Al matrix. In: Acta Materialia, 53 (17). pp. 4593-4603.

Bhattacharyya, Saswata and Abinandanan, TA (2009) Evolution of multivariant microstructures with anisotropic misfit: A phase field study. In: Acta Materialia, 57 (3). pp. 646-656.

Bhattacharyya, Saswata and Abinandanan, TA (2003) A study of phase separation in ternary alloys. In: Bulletin of Materials Science, 26 (1). pp. 193-197.

Bhowmick, R and Bysakh, S and Kawamura, Y and Yamasaki, M and Ramamurty, U and Chattopadhyay, K (2007) Microstructure and mechanical properties of electron beam weld joints of a $Zr_{41}Ti_{14}Cu_{12}Ni_{10}Be_{23}$ bulk metallic glass with Zr. In: Journal of Materials Research, 22 (2). pp. 437-444.

Bhowmick, R and Bysakh, S and Kawamura, Y and Yamasaki, M and Ramamurty, U and Chattopadhyay, K (2007) Microstructure and mechanical properties of electron beam weld joints of a Zr41Ti14Cu12Ni10Be23 bulk metallic glass with Zr. In: Journal of Materials Research, 22 (2).

Bhowmick, R and Raghavan, R and Chattopadhyay, K and Ramamurty, U (2006) Plastic flow softening in a bulk metallic glass. In: Acta Materialia, 54 (16). pp. 4221-4228.

Bhowmick, Ranadeep and Majumdar, Bhaskar and Misra, Dinesh K and Ramamurty, Upadrasta and Chattopadhyay, K (2007) Synthesis of bulk metallic glass composites using high oxygen containing Zr sponge. In: Journal of Materials Science, 42 (22). pp. 9359-9365.

Bhowmick, S and Bhide, R and Hoffman, M and Jayaram, V and Biswas, SK (2005) Fracture mode transitions during indentation of columnar TiN coatings on metal. In: Philosophical Magazine, 85 (25). pp. 2927-2945.

Bhowmick, S and Jayaram, V and Biswas, SK (2005) Deconvolution of fracture properties of TiN films on steels from nanoindentation load-displacement curves. In: Acta Materialia, 53 (8). pp. 2459-2467.

Bhowmick, S and Kale, AN and Jayaram, V and Biswas, SK (2003) Contact damage in TiN coatings on steel. In: Thin Solid Films, 436 (2). pp. 250-258.

Bhowmick, S and Waghmare, UV (2010) Anisotropy of the Stone-Wales defect and warping of graphene nanoribbons: A first-principles analysis. In: Physical Review B: Condensed Matter and Materials Physics, 81 (15).

Bhowmick, S and Xie, ZH and Hoffman, M and Jayaram, V and Biswas, SK (2004) Nature of contact deformation of TiN films on steel. In: Journal Of Materials Research, 19 (9). pp. 2616-2624.

Bhowmik, Ayan and Biswas, Somjeet and Dhinwal, Satyaveer Singh and Sarkar, Apu and Ray, Ranjit Kumar and Bhattacharjee, Debashish and Suwas, Satyam (2012) Microstructure and Texture Evolution in Interstitial-free (IF) Steel processed by Multi-Axial Forging. In: 16th International Conference on the Textures of Materials (ICOTOM 16, DEC 12-17, 2011 , Indian Inst Technol Bombay, Mumbai, INDIA, pp. 774-777.

Bhowmik, Ayan and Biswas, Somjeet and Suwas, Satyam and Ray, RK and Bhattacharjee, D (2009) Evolution of Grain-Boundary Microstructure and Texture in Interstitial-Free Steel Processed by Equal-Channel Angular Extrusion. In: Metallurgical and Materials Transactions A, 40A (11). pp. 2729-2742.

Bindu, R and Singh, Sanjay and Singh, Navneet and Ranjan, Rajeev and Maiti, Kalobaran and Hill, AH and Barman, SR (2012) Evidence of nanoscale structural phase separation in large bandwidth La0.2Sr0.8MnO3. In: Physical Review B, 86 (14). pp. 140104-1.

Biswas, K and Chattopadhyay, K (2008) Formation of ω-Al7Cu2Fe phase during laser processing of quasicrystal-forming Al-Cu-Fe alloy. In: Philosophical Magazine Letters, 88 (3). 219 -230.

Biswas, Krishanu and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2006) Microstructural evolution in laser-ablation-deposited Fe-25 at.% Ge thin film. In: Journal of Materials Research, 219 (1). pp. 174-184.

Biswas, Modhura and Raichur, Ashok M (2010) Dispersion of Zirconia in the Presence of Dolapix PC75. In: Journal of Dispersion Science and Technology, 31 (9). pp. 1173-1177.

Biswas, T and Ranganathan, S (2006) Multicomponent alloys visualized as lower order alloys: Examples of quasicrystals and metallic glasses. In: Annales de chimie, 31 (6). pp. 649-656.

Biswas, K and Das, Kumar P and Chattopadhyay, K (2007) Microstructural evolution and metastable phase formation in laser ablation-deposited films of Fe-rich Fe–Ge intermetallic compounds. In: Philosophical Magazine, 87 (2). pp. 307-323.

Biswas, K and Mordike, BL and Galun, R and Chattopadhyay, K (2004) The omega phase formation during laser cladding and remelting of quasicrystal forming AlCuFe on pure aluminum. In: Symposium on Quasicrystals 2003 - Preparation, Properties and Applications held at the 2003 MRS Fall Meeting, DEC 01-03, 2003, Boston, MA.

Biswas, K and Phanikumar, G and Chattopadhyay, K and Volkmann, T and Funke, O and Holland-Moritz, D and Herlach, DM (2004) Rapid solidification behaviour of undercooled levitated Fe–Ge alloy droplets. In: Materials Science and Engineering A, 375-37 . pp. 464-467.

Biswas, K and Phanikumar, G and Holland, Moritz D and Herlach, Dieter M and Chattopadhyay, K (2007) Disorder trapping and grain refinement during solidification of undercooled Fe–18 at% Ge melts. In: Philosophical Magazine, 87 (25). pp. 3817-3837.

Biswas, Krishanu and Basu, B and Suri, AK and Chattopadhyay, K (2006) A TEM study on TiB2-20%MoSi2 composite: Microstructure development and densification mechanism. In: Scripta Materialia, 54 (7). pp. 1363-1368.

Biswas, Krishanu and Chattopadhyay, K (2010) Microstructural Evolution during Laser Resolidification of Fe-18 At. Pct Ge Alloy. In: Mallurgical materials Transactions A, 41A (3). pp. 574-582.

Biswas, Krishanu and Chattopadhyay, Kamanio and Galun, Rolf and Mordike, Barry L (2003) The ω Phase Formation during Laser Cladding and Remelting of Quasicrystal Forming AlCuFe on Pure Aluminum. In: MRS Proceedings, 805 .

Biswas, Krishanu and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2006) Microstructural evolution in laser-ablation-deposited Fe–25 at.% Ge thin film. In: Journal of Materials Research, 21 (1). pp. 174-184.

Biswas, Krishanu and Galun, Rolf and Mordike, Barry L and Chattopadhyay, Kamanio (2005) Laser Cladding of Quasi-Crystal-Forming Al-Cu-Fe-Bi on an Al-Si Alloy Substrate. In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 36A (7). pp. 1947-1964.

Biswas, Krishanu and Galun, Rolf and Mordike, Barry L and Chattopadhyay, Kamanio (2004) Laser cladding of quasicrystal forming Al–Cu–Fe on aluminum. In: Journal of Non-Crystalline Solids, 334-33 . pp. 517-523.

Biswas, Krishanu and Mukhopadhyay, Amartya and Basu, Bikramjit and Chattopadhyay, Kamanio (2007) Densification and microstructure development in spark plasma sintered WC–6 wt% $ZrO_2$ nanocomposites. In: Journal of Materials Research, 22 (6). pp. 1491-1501.

Biswas, Krishanu and Mukhopadhyay, Amartya and Basu, Bikramjit and Chattopadhyay, Kamanio (2007) Densification and microstructure development in spark plasma sintered WC–6 wt% ZrO2 nanocomposites. In: Journal of Materials Research, 22 (6). pp. 1491-1501.

Biswas, Krishanu and Phanikumar, Gandham and Herlach, Dieter M and Chattopadhyay, Kamanio (2007) Non-equilibrium solidification of concentrated Fe–Ge alloys. In: Materials Science and Engineering A, 449-45 . pp. 12-17.

Biswas, Modhura and Raichur, Ashok M (2008) Electrokinetic and Rheological Properties of Nano Zirconia in the Presence of Rhamnolipid Biosurfactant. In: Journal of the American Ceramic Society, 91 (10). pp. 3197-3201.

Biswas, Somjeet and Beausir, Benoit and Toth, Laszlo S and Suwas, Satyam (2013) Evolution of texture and microstructure during hot torsion of a magnesium alloy. In: ACTA MATERIALIA, 61 (14). pp. 5263-5277.

Biswas, Somjeet and Dhinwal, Satyaveer Singh and Suwas, Satyam (2010) Room-temperature equal channel angular extrusion of pure magnesium. In: Acta Materialia, 58 (9). pp. 3247-3261.

Biswas, Somjeet and Kim, Dong-Ik and Suwas, Satyam (2012) Asymmetric and symmetric rolling of magnesium: Evolution of microstructure, texture and mechanical properties. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 550 . pp. 19-30.

Biswas, Somjeet and Singh, Satyaveer D and Bhowmik, Ayan and Suwas, Satyam (2008) Study of texture evolution of Pure Magnesium during ECAE using EBSD. In: 4th International Conference on Nanomaterials by Severe Plastic Deformation IV, AUG 18-22, 2008, Goslar, GERMANY.

Biswas, Somjeet and Suwas, Satyam (2012) Evolution of sub-micron grain size and weak texture in magnesium alloy Mg-3Al-0.4Mn by a modified multi-axial forging process. In: Scripta Materialia, 66 (2). pp. 89-92.

Biswas, Somjeet and Suwas, Satyam and Sikand, R and Gupta, Anil K (2011) Analysis of texture evolution in pure magnesium and the magnesium alloy AM30 during rod and tube extrusion. In: Materials Science and Engineering A, 528 (10-11). pp. 3722-3729.

Boddapati, Srinivasa Rao and Rodel, Jurgen and Jayaram, Vikram (2007) Crack growth resistance (R-curve) behaviour and thermo-physical properties of $Al_2O_3$ particle-reinforced AlN/Al matrix composites. In: Composites Part A: Applied Science and Manufacturing, 38 (3). pp. 1038-1050.

Boopathy, Kombaiah and Hofmann, Douglas C and Johnson, William L and Ramamurty, Upadrasta (2009) Near-threshold fatigue crack growth in bulk metallic glass composites. In: Journal of Materials Research, 24 (12). pp. 3611-3619.

Bose, Sangita and Bhattacharya, Victoria and Chattopadhyay, Kamanio and Ayyub, Pushan (2008) Proximity effect controlled superconducting behavior of novel biphasic Pb-Sn nanoparticles embedded in an Al matrix. In: Acta Materialia, 56 (16). pp. 4522-4528.

Brahma, Sanjaya and Rao, Kalya Jagannatha and Shivashankar, Srinivasarao (2010) Rapid growth of nanotubes and nanorods of wurtzite ZnO through microwave-irradiation of a metalorganic complex of zinc and a surfactant in solution. In: Bulletin of Materials Science, 33 (2). pp. 89-95.

Brahmaprakash, GP and Devasia, Preston and Jagadish, KS and Natarajan, KA and Rao, Ramananda G (1988) Development of Thiobacillus ferrooxidans ATCC 19859 strains tolerant to copper and zinc. In: Bulletin of Materials Science, 10 (5). pp. 461-465.

Brajesh, Kumar and Himanshu, AK and Sharma, Himanshu and Kumari, Kiran and Ranjan, Rajeev and Bandhopadhyay, SK and Sinha, TP (2012) Structural, dielectric relaxation and piezoelectric characterization of Sr2+ substituted modified PMS-PZT ceramic. In: Physica B: Condensed Matter, 407 (4). pp. 635-641.

Braun, Jean-Jacques and Descloitres, Marc and Riotte, Jean and Fleury, Simon and Barbiero, Laurent and Boeglin, Jean-Loup and Violette, Aurelie and Lacarce, Eva and Ruiz, Laurent and Sekhar, M and Kumar, MS Mohan and Subramanian, S and Dupre, Bernard (2009) Regolith mass balance inferred from combined mineralogical, geochemical and geophysical studies: Mule Hole gneissic watershed, South India. In: Geochimica et Cosmochimica Acta, 73 (4). pp. 935-961.

Bravo-León, A and Jiménez-Melendo, M and Rodriǵuez, Domínguez A and Chokshi, AH (1994) The influence of oxygen partial pressure on the creep characteristics of a superplastic 4 mol % yttria partially-stabilized zirconia. In: Journal of Materials Science Letters, 13 (16). pp. 1169-1170.

Bravo-León, Alfonso and Jiménez-Melendo, Manuel and Domínguez-Rodríguez, Arturo and Chokshi, Atul H (1996) The role of a threshold stress in the superplastic deformation of fine-grained yttria-stabilized zirconia polycrystals. In: Scripta Materialia, 34 (7). pp. 1155-1160.

Brown, CA and Surappa, MK (1988) The machinability of a cast aluminium alloy-graphite particle composite. In: Materials Science and Engineering: A, 102 (1). pp. 31-37.

Bysakh, S and Mitsuishi, K and Song, M and Furuya, K and Chattopadhyay, K (2004) Transmission electron microscopy and high-resolution transmission electron microscopy study of nanostructure and metastable phase evolution in pulsed-laser-ablation-deposited Ti-Si thin film. In: Journal Of Materials Research, 19 (4). pp. 1118-1125.

Bysakh, Sandip and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2002) Microstructure evolution and metastable phase formation in laser-ablation-deposited films of $Ti_5Si_3$ intermetallic compound. In: Philosophical Magazine A, 82 (6). pp. 1235-1248.

Bysakh, S and Chattopadhyay, K and Ling, H and Wu, JD and Dong, C and Wang, YQ and Duan, XF and Kuo, KH (2004) A Study of Nanostructures of Thin Films in B–C–N System Produced by Pulsed Laser Deposition and Nitrogen Ion-Beam-Assisted Pulsed Laser Deposition. In: Journal of Materials Research, 19 (3). pp. 759-767.

Bysakh, S and Chattopadhyay, K and Ling, H and Wu, JD and Dong, C and Wang, YQ and Duan, XF and Kuo, KH (2004) The effect of boundaries on the plane Couette flow of granular materials: a bifurcation analysis. In: Journal of Materials Research, 19 (3). pp. 759-767.

Bysakh, S and Das, PK and Chattopadhyay, K (2001) Metastable microstructures in laser ablation deposited aluminium-50 at.% nickel thin films. In: Materials Science and Engineering A, 304-30 . pp. 608-611.

Bysakh, S and Mitra, SK and Phanikumar, G and Mazumder, J and Dutta, P and Chattopadhyay, K (2003) Characterization of microstructure in laser-surface-alloyed layers of aluminum on nickel. In: Metallurgical and Materials Transactions A, 34A (11). pp. 2621-2631.

Bysakh, Sandip and Chattopadhyay, Kamanio and Maiwald, Thorsten and Galun, Rolf and Mordike, Barry L (2004) Microstructure evolution in laser alloyed layer of Cu–Fe–Al–Si on Cu substrate. In: Materials Science and Engineering A, 375-37 . pp. 661-665.

Bysakh, Sandip and Das, PK and Chattopadhyay, K (2001) Evolution of Metastable Microstructures in Laser Ablation Deposited $Ni_{75}Al_{25}$ Thin Films. In: Scripta Materialia, 44 (8-9). pp. 1847-1851.

Bysakh, Sandip and Das, Pushpendu Kumar and Chattopadhyay, Kamanio (2001) Metastable microstructures in laser-ablation-deposited Al–Fe thin films. In: Philosophical Magazine A, 81 (11). pp. 2689-2704.

Bysakh, Sandip and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2003) Evolution of metastable phases during crystallization of pulsed laser deposited amorphous Al–Fe films. In: Journal of Materials Research, 18 (2). pp. 284-295.

Bysakh, Sandip and Mitsuishi, Kazutaka and Song, Minghui and Furuya, Kazuo and Chattopadhyay, Kamanio (2011) Formation of amorphous xenon nanoclusters and microstructure evolution in pulsed laser deposited Ti(62.5)Si(37.5) thin films during Xe ion irradiation. In: Journal of Materials Research, 26 (1). pp. 62-69.

Bysakh, Sandip and Mitsuishi, Kazutaka and Song, Minghui and Furuya, Kazuo and Chattopadhyay, Kamanio (2011) Formation of amorphous xenon nanoclusters and microstructure evolution in pulsed laser deposited Ti62.5Si37.5 thin films during Xe ion irradiation. In: Journal of Materials Research, 26 . 62-69 .

C

Cary, Lise and Alexandre, Anne and Meunier, Jean-Dominique and Boeglin, Jean-Loup and Braun, Jean-Jacques (2005) Contribution of phytoliths to the suspended load of biogenic silica in the Nyong basin rivers (Cameroon). In: Biogeochemistry, 74 (1). pp. 101-114.

Chakrabarty, AK and Jacob, KT (2013) Experimental study of phase equilibria in the system Cu-Al-Sn. In: Journal of Phase Equilibria and Diffusion, 34 (4). pp. 267-276.

Chakrabarty, AK and Jacob, KT (2013) Isothermal transformation of beta-phase in Cu-rich Cu-Al-Sn alloys. In: International Journal of Materials Research, 104 (5). pp. 430-441.

Chakraborty, J and Ghosh, M and Ranjan, Rajeev and Das, G and Das, D and Chandra, S (2013) X-ray diffraction and Mossbauer spectroscopy studies of cementite dissolution in cold-drawn pearlitic steel. In: PHILOSOPHICAL MAGAZINE, 93 (36). pp. 4598-4616.

Chakraborty, J and Kumar, Kishor and Ranjan, Rajeev and Chowdhury, Ghosh S and Singh, SR (2011) Thickness-dependent fcc-hcp phase transformation in polycrystalline titanium thin films. In: Acta Materialia, 59 (7). pp. 2615-2623.

Chakraborty, S and Tiwary, CS and Kole, AK and Kumbhakar, P and Chattopadhyay, K (2013) A simple method of synthesis and optical properties of Mn doped ZnO nanocups. In: MATERIALS LETTERS, 91 . pp. 379-382.

Chakravartty, JK and Banerjee, S and Prasad, YVRK (1992) Superplasticity in ?-zirconium: A study using a processing map. In: Scripta Metallurgica et Materialia, 26 (1). pp. 75-78.

Chakravartty, JK and Banerjee, S and Prasad, YVRK and Asundi, MK (1992) Hot-working characteristics of Zircaloy-2 in the temperature range of 650–950°C. In: Journal of Nuclear Materials, 187 (3). pp. 260-271.

Chakravartty, JK and Dey, GK and Banerjee, S and Prasad, YVRK (1995) Characterization of hot deformation behaviour of Zr---2.5Nb---0.5Cu using processing maps. In: Journal of Nuclear Materials, 218 (2). pp. 247-255.

Chakravartty, JK and Dey, GK and Banerjee, S and Prasad, YVRK (1996) Dynamic recrystallisation during hot working of Zr-2 center dot 5Nb: Characterisation using processing maps. In: Materials Science and Technology, 12 (9). pp. 705-716.

Chakravartty, JK and Kapoor, R and Banerjee, S and Prasad, YVRK (2007) Characterization of hot deformation behavior of Zr-1Nb-1Sn alloy. In: Journal of Nuclear Materials, 362 (1). pp. 75-86.

Chakravartty, JK and Prasad , YVRK and Asundi, MK (1991) Processing map for hot working of alpha-zirconium. In: Metallurgical Transactions. Physical Metallurgy and Material, 22 (4). pp. 829-836.

Chan, JC and Alcock, CB and Jacob, KT (1973) Electrochemical measurement of the oxygen potential of the system iron+alumina+ hercynite in the temperature range 750 to 1600oC. In: Canadian Metallurgical Quarterly, 12 (4). pp. 439-443.

Chandra, Sarath D and Avadhani, GS and Kishore, * (1991) Effect of SiC particles on the mechanical properties of glass-phenolic composites. In: Materials Science and Engineering A, 136 (30). pp. 179-182.

Chandra, Sarath D and Rao, RMVGK and Kishore, * (1991) Effect of SiC particles on compressive strength and fracture features of glass/phenolic composites. In: Scripta Metallurgica et Materialia, 25 (7). pp. 1641-1646.

Chandra, Sarath D and Rao, RMVGK and Kishore, * (1991) Effect of post-curing on the mechanical properties and fracture features of some glass-phenolic composites. In: Journal of Materials Science Letters, 10 (21). pp. 1263-1266.

Chandraprabha, MN and Natarajan, KA (2010) Microbially Induced Mineral Beneficiation. In: Mineral Processing and Extractive Metallurgy Review, 31 (1). pp. 1-29.

Chandraprabha, MN and Natarajan, KA (2009) Microbially induced separation of arsenopyrite and bioremediation of arsenic. In: Minerals and Metallurgical Processing, 26 (4). pp. 217-221.

Chandraprabha, MN and Modak, JM and Natarajan, KA (2009) Soft-particle model analysis of effect of LPS on electrophoretic softness of Acidithiobacillus ferrooxidans grown in presence of different metal ions. In: Colloids and Surfaces B: Biointerfaces, 69 (1). pp. 1-7.

Chandraprabha, MN and Modak, JM and Natarajan, KA and Raichur, AM (2002) Strategies for efficient start-up of continuous biooxidation process for refractory gold ores. In: Minerals Engineering, 15 (10). 751-753 .

Chandraprabha, MN and Natarajan, KA (2008) Biomudulation of Sulfide Minerals for Environment-friendly Beneficiation. In: Proceedings of XXIV International Mineral Processing Congress, Beijing (IMPC-2008).

Chandraprabha, MN and Natarajan, KA (2013) Role of outer membrane exopolymers of Acidithiobacillus ferrooxidans in adsorption of cells onto pyrite and chalcopyrite. In: INTERNATIONAL JOURNAL OF MINERAL PROCESSING, 123 . pp. 152-157.

Chandraprabha, MN and Natarajan, KA (2006) Surface chemical and flotation behaviour of chalcopyrite and pyrite in the presence of Acidithiobacillus thiooxidans. In: Hydrometallurgy, 83 (1-4). pp. 146-152.

Chandraprabha, MN and Natarajan, KA (2005) Surface chemical characterization of acidithiobacillus ferrooxidans grown in presence of different metal ions. In: Proc. XXIII Int. Mineral Processing Congress, SEP 2006, Istanbul, Turkey.

Chandraprabha, MN and Natarajan, KA and Modak, Jayant M (2004) Selective separation of pyrite and chalcopyrite by biomodulation. In: Colloids and Surfaces B: Biointerfaces, 37 (3-4). pp. 93-100.

Chandraprabha, MN and Natarajan, KA and Somasundaran, P (2004) Selective separation of arsenopyrite from pyrite by biomodulation in the presence of Acidithiobacillus ferrooxidans. In: Journal of Colloid and Interface Science, 276 (2). pp. 323-332.

Chandraprabha, MN and Natarajan, KA and Somasundaran, P (2005) Selective separation of pyrite from chalcopyrite and arsenopyrite by biomodulation using Acidithiobacillus ferrooxidans. In: International Journal of Mineral Processing, 75 (1-2). pp. 113-122.

Chandrasekaran, T (1992) A new approach to the kinetics of size reduction in ball milling. In: Minerals Engineering, 5 (8). 931 -938.

Chandrasekaran, T and Kishore, * (1993) Development of a new wear index in slurry erosion tests on steels. In: Journal of Materials Science Letters, 12 (2). pp. 96-98.

Chandrasekaran, T and Kishore, * (1993) Effect of microstructure and hardness on the grinding abrasive wear resistance of a ball bearing steel. In: Wear, 161 (1-2). pp. 105-109.

Chandrasekaran, T and Kishore, * (1993) On the roughness dependence of wear of steels: a new approach. In: Journal of Materials Science Letters, 12 (12). pp. 952-954.

Chandrasekaran, T and Natarajan, KA and Kishore, * (1991) Influence of microstructure on the wear of grinding media. In: Wear, 147 (2). 267 -274.

Chatterjee, S and Abinandanan, TA and Chattopadhyay, K (2006) Microstructure development during dissimilar welding: Case of laser welding of Ti with Ni involving intermetallic phase formation. In: Journal of Material Science, 41 (3). pp. 643-652.

Chatterjee, S and Abinandanan, TA and Chattopadhyay, K (2008) Phase formation in Ti/Ni dissimilar welds. In: Materials Science and Engineering A, 490 (1-2). pp. 7-15.

Chatterjee, Subhradeep and Abinandanan, TA and Chattopadhyay, Kamanio (2008) Phase-Field Simulation of Fusion Interface Events during Solidification of Dissimilar Welds: Effect of Composition Inhomogeneity. In: Symposium on Materials Behavior - Far from Equilibrium, DEC 15-16, 2006, Bombay.

Chattopadhyay, K (2004) Phases and microstructure evolution through nonequilibrium processing - (The surprises and joys of meandering through the nonequilibrium landscape). In: Transactions Of The Indian Institute of Metals, 57 (1). pp. 1-11.

Chattopadhyay, K and Biswas, K and Bysakh, S and Phanikumar, G and Weisheit, A and Galun, R and Mordike, B (2001) Quasicrystalline coatings through laser processing: a study on process optimisation and microstructure evolution. In: Quasicrystals - Preparation, Properties and Applications. Symposium, 27-30 Nov. 2000, Boston, MA, USA, K15.3.1-K15.3.12.

Chattopadhyay, K (2005) Behaviour of Embedded Metals and Alloys at Small Sizes. In: Transactions of the Indian Institute of Metals, 58 (6). pp. 1057-1067.

Chattopadhyay, K (1992) Nanocomposites by rapid solidification route. In: Bulletin of Materials Science, 15 (6). pp. 515-525.

Chattopadhyay, K (1997) Synthesis and properties of nanodispersed granular materials. In: Materials Science and Engineering A, 226 . pp. 1012-1018.

Chattopadhyay, K (2000) Trends and opportunities in basic research in microgravity materials processing. In: Current Science, 79 (3). pp. 328-334.

Chattopadhyay, K and Aaronson, HI (1986) Interfacial structure and crystallographic studies of transformations in betat' and beta Cu---Zn alloys-II. martensitic formation of alpha1' plates in beta'. In: Acta Metallurgica, 34 (4). pp. 713-720.

Chattopadhyay, K and Bhattacharya, V (2009) Microstructure, shape, stability and melting inembeddednanoparticles. In: Journal of the Indian Institute of Science, 89 (1).

Chattopadhyay, K and Biswas, K and Bysakh, S and Phanikumar, G and Weisheit, A and Galun, R and Mordike, B (2000) Quasicrystalline Coatings Through Laser Processing: A Study on Process Optimisation and Microstructure Evolution. In: MRS Proceedings, 643 .

Chattopadhyay, K and Goswami, R (1997) Melting and superheating of metals and alloys. In: Progress in Materials Science, 42 (1-4). pp. 287-300.

Chattopadhyay, K and Goswami, R and Nagarajan, R and Bhatia, T and Majumdar, B (1994) Synthesis and properties of nanodispersed alloys. In: 3rd IUMRS International Conference on Advanced Materials (ICAM), AUG 31-SEP 04, 1993, SUNSHINE CITY, JAPAN.

Chattopadhyay, K and Lele, S and Prasad, R and Ranganathan, S and Subbanna, GN and Thangaraj, N (1985) On the variety of electron diffraction patterns from quasicrystals. In: Scripta Metallurgica, 19 (11). pp. 1331-1334.

Chattopadhyay, K and Lele, S and Ranganathan, S and Subbanna, GN and Thangaraj, N (1985) Electron Microscopy of Quasi-Crystals and Related Structures. In: Current Science, 54 (18). pp. 895-903.

Chattopadhyay, K and Lele, S and Thangaraj, N and Ranganathan, S (1987) Vacancy ordered phases and one-dimensional quasiperiodicity. In: Acta Metallurgica, 35 (3). pp. 727-733.

Chattopadhyay, K and Mukhopadhyay, NK (1987) The Nature of the Early Stages of Decomposition of Icosahedral Quasicrystals. In: Materials Science Forum, 22-24 . pp. 639-651.

Chattopadhyay, K and Mukhopadhyay, NK (1990) On the origin of banded microstructure in rapidly solidified alloys: The case of Al-10%Mn quasicrystalline system. In: Journal of Crystal Growth, 106 (2-3). pp. 387-392.

Chattopadhyay, K and Ojha, SN and Rao, P. Ramachandra (1985) Phase transformations and metastable phase equilibria in Al-Ge alloy. In: Materials Science and Engineering, 73 (1-2). pp. 177-185.

Chattopadhyay, K and Ranganathan, S (1990) Quasi-Crystals. In: Indian Journal of Technology, 28 (6-8). pp. 394-403.

Chattopadhyay, K and Ranganathan, S and Subbanna, GN and Thangaraj, N (1985) Electron microscopy of quasi-crystals in rapidly solidified Al-14% Mn alloys. In: Scripta Metallurgica, 19 (6). pp. 767-771.

Chattopadhyay, K and Ravi, VA and Ranganathan, S (1986) Non-equilibrium trapping in Al---In system. In: Acta Metallurgica, 34 (4). 691 -693.

Chattopadhyay, K and Ravishankar, N and Abinandanan, TA and Varghese, Viji (2003) Understanding milling induced changes: Some results. In: Journal of Chemical Sciences, 115 (5-6). pp. 727-740.

Chattopadhyay, K and Ravishankar, N and Goswami, R (1997) Shapes of quasicrystals. In: Progress in Crystal Growth and Characterization of Materials, 34 (1-4). pp. 237-249.

Chattopadhyay, K and Sreekumar, K and Sarma, AK and Raviprasad, K (1990) A study of the early stage decomposition behaviour of $Al-Li$ alloys at room temperature. In: Scripta Metallurgica et Materialia, 24 (8). pp. 1495-1500.

Chattopadhyay, K and Swamy, VT and Agarwala, SL (1990) The Solidification Behaviour of Undercooled Al-Cu Alloys in Contact with the Primary Phases. In: Acta Metallurgica et Materialia, 38 (3). pp. 521-531.

Chattopadhyay, K and Swarnamba, PR and Srivastava, JPN (1989) The evolution of microstructure in the undercooled Zn-Sn entrained droplets. In: Metallurgical Transactions A, 20 (10). pp. 2109-2115.

Chattopadhyay, K and Tiwari, MK (1992) Materials processing under microgravity conditions using drop tubes. In: Bulletin of Materials Science, 15 (2). pp. 91-110.

Chattopadhyay, K and Varghese, V (2004) Understanding mechanical energy driven nonequilibrium processing: some results. In: Materials Science and Engineering A, 375-37 . pp. 72-77.

Chattopadhyay, K and Wang, XM and Aoki, K and Masumoto, T (1996) Metastable phase formation during mechanical alloying of Al-Ge and Al-Si alloys. In: Journal of Alloys and Compounds, 232 (1-2). pp. 224-231.

Chattopadhyay, Kamanio (2006) Training Young Minds for Nanoscience and Technology: Issues and Challenges. In: MRS Proceedings, 931 .

Chattopadhyay, Kamanio and Das, Puspendu kumar and Bysakh, Sandip (2002) Microstructure evolution and metastable phase formation in laser-ablation-deposited films of Ti5Si3 intermetallic compound. In: Philosophical Magazine A, 82 (6). pp. 1235-1248.

Chattopadyhay, K and Aoki, K and Masumoto, T (1987) The nature of hydrogen induced amorphization of SmNi2 laves compound. In: Scripta Metallurgica, 21 (3). pp. 365-369.

Chen, N and Louzguine, DV and Ranganathan, S and Inoue, A (2005) Formation ranges of icosahedral, amorphous and crystalline phases in rapidly solidified Ti-Zr-Hf-Ni alloys. In: Acta Materialia, 53 (3). pp. 759-764.

Chen, N and Louzguine-Luzgin, DV and Kubota, T and Ranganathan, S and Inoue, A (2005) Formation of amorphous and icosahedral phases in Ti-Zr-Hf-LTM (LTM =Ni, Pd or Pt) alloys. In: Scripta Materialia, 53 (2). pp. 213-216.

Chen, N and Louzguine-Luzgin, DV and Ranganathan, S and Inoue, A (2005) Glassy and icosahedral phases in rapidly solidified Ti-Zr-Hf-(Fe, Co orNi) alloys. In: Journal of Non-crystalline Solids, 351 (30-32). pp. 2547-2551.

Chen, N and Yao, Kefu and Louzguine-Luzgin, DV and Qiu, Shengbao and Ranganathan, S and Inoue, A (2007) Phase transformations in the rapidly solidified Ti40Zr20Hf20Pd20 alloy. In: Scripta Materialia, 57 (7). pp. 631-634.

Chinnasamy, CN and Narayanasamy, A and Chattopadhyay, K and Ponpandian, N (1999) Magnetic properties of mechanically alloyed nanocrystalline Ni3Fe. In: Nanostructured Materials, 12 (5-8). pp. 951-954.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Chattopadhyay, K (2001) The influence of Fe3+ ions at tetrahedral sites on the magnetic properties of nanocrystalline ZnFe2O4. In: Materials Science and Engineering: A, 304-6 . pp. 983-987.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Chattopadhyay, K and Guerault, H and Greneche, JM (2001) Ferrimagnetic Ordering In Nanostructured Zinc Ferrite. In: Scripta Materialia, 44 (8-9). pp. 1407-1410.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Chattopadhyay, K and Guerault, H and Greneche, JM (2000) Magnetic properties of nanostructured ferrimagnetic zinc ferrite. In: Journal of Physics: Condensed Matter, 12 (35). pp. 7795-7805.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Chattopadhyay, K and Saravanakumar, M (2001) Order–disorder studies and magnetic properties of mechanically alloyed nanocrystalline Ni3Fe alloy. In: Materials Science and Engineering A, 304 (Sp. Is). pp. 408-412.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Joseyphus, Justin R and Chattopadhyay, K and Shinoda, B and Jeyadevan, B and Tohji, K and Nakatsuka, K and Greneche, JM (2001) Ferrimagnetic ordering in nanostructured CdFe2O4 spinel. In: Journal Of Applied Physics, 90 (1). pp. 527-529.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Joseyphus, RJ and Jeyadevan, B and Tohji, K and Chattopadhyay, K (2002) Grain size effect on the Neel temperature and magnetic properties of nanocrystalline $NiFe{_2}O{_4}$ spinel. In: Journal of Magnetism and Magnetic Materials, 238 (2-3). pp. 281-287.

Chirranjeevi, BG and Abinandanan, TA and Gururajan, MP (2009) A phase field study of morphological instabilities in multilayer thin films. In: Acta Materialia, 57 (4). pp. 1060-1067.

Chitara, Basant and Jebakumar, DS Ivan and Rao, CNR and Krupanidhi, SB (2009) Negative differential resistance in GaN nanocrystals above room temperature. In: Nanotechnology, 20 (40). pp. 1-4.

Chithra, S and Lele, S and Chattopadhyay, K (2011) Structure evolution and phase change in Ag-5.1 at.% Bi alloy during mechanical alloying. In: Acta Materialia, 59 (5). pp. 2009-2019.

Chithra, S and Malviya, KD and Chattopadhyay, K (2014) Structural Evolution and Phase Stability of Hume-Rothery Phase in a Mechanically Driven Nanostructured Ag-15 at. pct Sn Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A (3). pp. 1148-1160.

Chitralekha, J and Raviprasad, K and Gopal, ESR and Chattopadhyay, K (1995) Formation of metastable p phase in mechanically alloyed tellurium-rich Ag–Te alloys. In: Journal of Materials Research, 10 (8). pp. 1897-1904.

Chitralekha, J and Gopal, ESR and Chattopadhyay, K (1997) Studies on elemental tellurium under high pressure. In: Journal of Materials Science, 32 (8). pp. 2177-2180.

Chitralekha, J and Srinivasan, A and Chattopadhyay, K and Gopal, ESR (1996) Influence of the Mechanical and Chemical Thresholds on the Microhardness of Ternary Chalcogenide Glasses. In: Physica Status Solidi B, 197 (2). pp. 343-348.

Chockalingam, E and Subramanian, S and Braun, JJ (2008) Bioremediation of acid mine water using rice husk and tree bark. In: Proceedings of the XXIV International Mineral Processing Congress, 2008, Beijing, China.

Chockalingam, Evvie and Sivapriya, K and Subramanian, S and Chandrasekaran, S (2005) Rice husk filtrate as a nutrient medium for the growth of Desulfotomaculum nigrificans: characterisation and sulfate reduction studies. In: Bioresource Technology, 96 (17). pp. 1880-1888.

Chockalingam, Evvie and Sivapriya, K and Subramanian, S and Chandrasekaran, Srinivasan (2005) Rice husk filtrate as a nutrient medium for the growth of Desulfotomaculum nigrificans: characterisation and sulfate reduction studies. In: Bioresource Technology, 96 (17). pp. 1880-1888.

Chockalingam, Evvie and Subramanian, S (2006) Studies on removal of metal ions and sulphate reduction using rice husk and Desulfotomaculum nigrificans with reference to remediation of acid mine drainage. In: Chemosphere, 62 (5). pp. 699-708.

Chockalingam, Evvie and Subramanian, S (2009) Utility of Eucalyptus tereticornis (Smith) bark and Desulfotomaculum nigrificans for the remediation of acid mine drainage. In: Bioresource Technology, 100 (2). pp. 615-621.

Chockalingam, Evvie and Subramanian, S and Natarajan, KA (2003) Studies on biodegradation of organic flotation collectors using Bacillus polymyxa. In: Hydrometallurgy, 71 (1-2). pp. 249-256.

Choi, In-Chul and Kim, Yong-Jae and Wang, Morris Y and Ramamurty, Upadrasta and Jang, Jae-il (2013) Nanoindentation behavior of nanotwinned Cu: Influence of indenter angle on hardness, strain rate sensitivity and activation volume. In: Acta Materialia, 61 (19). pp. 7313-7323.

Choi, In-Chul and Zhao, Yakai and Kim, Yong-Jae and Yoo, Byung-Gil and Suh, Jin-Yoo and Ramamurty, Upadrasta and Jang, Jae-il (2012) Indentation size effect and shear transformation zone size in a bulk metallic glass in two different structural states. In: ACTA MATERIALIA, 60 (19). pp. 6862-6868.

Choi, In-Chul and Zhao, Yakai and Yoo, Byung-Gil and Kim, Yong-Jae and Suh, Jin-Yoo and Ramamurty, Upadrasta and Jang, Jae-il (2012) Estimation of the shear transformation zone size fin a bulk metallic glass through statistical a analysis of the first pop-in stresses during spherical nanoindentation. In: SCRIPTA MATERIALIA, 66 (11). pp. 923-926.

Chokshi, AH (2000) Superplastic ceramics. In: Creep, Fatigue and Creep-Fatigue Interaction, 20-22 Jan. 1999, Kalpakkam, India, pp. 129-134.

Chokshi, AH (1999) The role of interfaces in the high temperature deformation and failure of polycrystalline alumina. In: Towards Innovation in Superplasticity II. 2nd International Conference, 21-24 Sept. 1998, Kobe City, Japan, pp. 387-394.

Chokshi, AH and Kottada, RS (2005) The deformation characteristics of nanocrystalline metals. In: Transactions of the Indian Institute of Metals, 58 (6). pp. 939-950.

Chokshi, Atul H (2008) Microstructural stability and creep in nanocrystals. In: 4th International Conference on Nanomaterials by Severe Plastic Deformation, AUG 18-22, 2008, Goslar.

Chokshi, Atul H (1998) Superplasticity in zirconia-based ceramics. In: TMS Annual Meeting on Superplasticity and Superplastic Forming, 16-19 Feb. 1998, San Antonio, TX, USA, pp. 257-265.

Chokshi, Atul H (1996) The influence of grain size on cavitation in superplasticity. In: International Symposium Towards Innovation in Superplasticity, 23-24 July, Kyoto, Japan, Vol.233-234, 89-108.

Chokshi, AH (1999) Diffusion creep in ceramics. In: Proceedings of Creep Behavior of Advanced Materials for the 21st Century. TMS Annual Meeting, 28 Feb.-4 March 1999, San Deigo, CA, USA, pp. 461-470.

Chokshi, AH (2003) The influence of grain size on deformation of copper. In: Materials Science Forum, 426-4 . 4393-4398 .

Chokshi, AH and Yoshida, H and Ikuhara, Y and Sakuma, T (2003) The influence of trace elements on grain boundary processes in yttria-stabilized tetragonal zirconia. In: Materials Letters, 57 (26-27). pp. 4196-4201.

Chokshi, Atul H (1996) An Analysis of Creep Deformation in Nanocrystalline Materials. In: Scripta Materialia, 34 (12). pp. 1905-1910.

Chokshi, Atul H (2010) Bt brinjal: premature approval for cultivation. In: Current Science, 98 (6). p. 734.

Chokshi, Atul H (2005) Cavity nucleation and growth in superplasticity. In: Materials Science and Engineering: A, 410 . pp. 95-99.

Chokshi, Atul H (2008) Diffusion creep in metals and ceramics: Extension to nanocrystals. In: Materials Science and Engineering: A, 483-48 . pp. 485-491.

Chokshi, Atul H (2002) Diffusion creep in oxide ceramics. In: Journal of the European Ceramic Society, 22 (14-15). pp. 2469-2478.

Chokshi, Atul H (2003) Diffusion, diffusion creep and grain growth characteristics of nanocrystalline and fine-grained monoclinic, tetragonal and cubic zirconia. In: Scripta Materialia, 48 (6). pp. 791-796.

Chokshi, Atul H (2001) On the emergence of new surface grains during superplastic deformation. In: Scripta Materialia, 44 (11). pp. 2611-2615.

Chokshi, Atul H (2000) The Role of Diffusion Creep in the Superplastic Deformation of 3 Mol% Yttria Stabilized Tetragonal Zirconia. In: Scripta Materialia, 42 (3). pp. 241-248.

Chokshi, Atul H (2000) The Role of Diffusion Creep in the Superplastic Deformation of 3 mol% Yttria Stabilized Tetragonal Zirconia. In: Scripta Materialia, 42 (3). pp. 241-248.

Chokshi, Atul H (2008) Triple junction limited grain growth in nanomaterials. In: Scripta Materialia, 59 (7). pp. 726-729.

Chokshi, Atul H (2009) Unusual stress and grain size dependence for creep in nanocrystalline materials. In: Scripta Materialia, 61 (1). pp. 96-99.

Chokshi, Atul H (2012) What is really real? In: Current Science, 102 (3). pp. 389-393.

Chokshi, Atul H (1997) A comparative examination of superplastic flow and fracture in metals and ceramics. In: Materials Science and Engineering A, 234-23 . pp. 986-990.

Chokshi, Atul H and Langdon, Terence G (1996) A Model Study of Cavity Growth in Superplasticity Using Single Premachined Holes. In: Metallurgical and Materials Transactions A, 27A (9). pp. 2532-2539.

Chollacoop, N and Ramamurty, U (2010) Three-Dimensional simulation of deformation fields underneath vickers indenter:Effects of power-law Plasticity. In: Symposium on Mechanical Behavior of Micro- and Nano-Scale System held at the ICMAT 2009, JUN 28-JUL 03, 2009, Singapore.

Chollacoop, N and Ramamurty, U (2005) Experimental assessment of the representative strains in instrumented sharp indentation. In: Scripta Materialia, 53 (2). pp. 247-251.

Choudhury, Samrat and Gandhi, Ashutosh S and Jayaram, Vikram (2003) Bulk, Dense, Nanocrystalline Yttrium Aluminum Garnet by Consolidation of Amorphous Powders at Low Temperatures and High Pressures. In: Journal of the American Ceramic Society, 86 (2). pp. 247-251.

D

Dahilstedt, A and Ramanachalam, MS and Jacob, KT and Seetaraman, S (1993) Matched thermochemical diagram for vacuum decarburization of ferroalloys. In: Scandinavian Journal of Metallurgy, 22 (1). pp. 17-23.

Dahlstedt, A and Seetharaman, S and Jacob, KT (1992) Thermodynamics of salt roasting of sulphide ores. In: Scandinavian Journal of Metallurgy, 21 (6). pp. 242-245.

Das, A and Mishra, AK (1996) Role of Thiobacillus ferrooxidans and sulphur (sulphide)-dependent ferric-ion-reducing activity in the oxidation of sulphide minerals. In: Applied Microbiology and Biotechnology, 45 (3). pp. 377-382.

Das, A and Rao, Hanumantha K and Sharma, P and Natarajan, KA and Forssberg, KSE (1999) Surface chemical and adsorption studies using Thiobacillus ferrooxidans with reference to bacterial adhesion to sulfide minerals. In: Biohydrometallurgy and the Environment Toward the Mining of the 21st Century - Proceedings of the International Biohydrometallurgy Symposium, JUN 20-23, 1999, Madrid, Spain.

Das, Amitabha and Modak, Jayant M and Natarajan, KA (1998) Surface chemical studies of Thiobacillus ferrooxidans with reference to copper tolerance. In: Antonie van Leeuwenhoek, 73 (03). pp. 215-222.

Das, Barun and Prasad, K Eswar and Ramamurty, U and Rao, CNR (2009) Nano-indentation studies on polymer matrix composites reinforced by few-layer graphene. In: Nanotechnology, 20 (12). pp. 125705-125710.

Das, Chandasree and Kiran, MSRN and Ramamurty, U and Asokan, S (2012) Manifestation of intermediate phase in mechanical properties: Nano-indentation studies on Ge-Te-Si bulk chalcogenide glasses. In: SOLID STATE COMMUNICATIONS, 152 (24). pp. 2181-2184.

Das, KK and Pradip, * and Natarajan, KA (1997) The effect of constituent metal ions on the electrokinetics of chalcopyrite. In: Journal of Colloid and Interface Science, 196 (1). pp. 1-11.

Das, Kaushik and Karthik, C and Varma, KBR and Ramamurty, U (2008) Nano- and micro-indentation studies on lithium borate-barium bismuth niobate glasses. In: Journal of Non-Crystalline Solids, 354 (32). pp. 3793-3798.

Das, Manasmita and Dhak, Prasanta and Gupta, Satyajit and Mishra, Debasish and Maiti, Tapas K and Basak, Amit and Pramanik, Panchanan (2010) Highly biocompatible and water-dispersible, amine functionalized magnetite nanoparticles, prepared by a low temperature, air-assisted polyol process: a new platform for bio-separation and diagnostics. In: Nanotechnology, 21 (12).

Das, Sarmistha and Varalakshmi, K and Jayaram, V. and Biswas, SK (2007) Ultra Mild Wear in Lubricated Tribology of an Aluminium Alloy. In: Journal of Tribology, 129 (4). pp. 942-951.

Dasgupta, Niladri and Krishnamoorthy, R and Jacob, KT (2001) Crystal structure, thermal expansion and electrical conductivity of $Nd_{0.7} Sr_{0.3} Fe_{1-x}Co_xO_3$ (0 \leq x \leq 0.8). In: High Temperature Materials and Processes, 20 (5-6). pp. 367-376.

Dasgupta, Niladri and Krishnamoorthy, R and Jacob, Thomas K (2001) Crystal Structure, Thermal Expansion and ElectricaH Conductivity of Yo.sCao.2Fel-x Mnx03+o (0 < x < 1.0). In: High Temperature Materials and Processes, 20 (5-6). pp. 367-376.

Dasgupta, Niladri and Krishnamoorthy, R and Jacob, Thomas K (2002) Crystal structure and thermal and electrical properties of the perovskite solid solution Nd1-xSrxFeO3-delta (0 <= x <= 0.4). In: Solid State Ionics, 149 (3-4). pp. 227-236.

Dasgupta, Niladri and Krishnamoorthy, R and Jacob, Thomas K (2002) Crystal structure, thermal expansion and electrical conductivity of Nd0.7Sr0.3Fe1-xCoxO3 (0 <= x <= 0.8). In: Materials Science and Engineering B, 90 (3). pp. 278-286.

Datta, A and Srirangarajan, A and Waghmare, UV and Ramamurty, U and To, AC (2011) Surface effects on stacking fault and twin formation in fcc nanofilms: A first-principles study. In: Computational Materials Science, 50 (12). pp. 3342-3345.

Datta, Aditi and Waghmare, UV and Ramamurty, U (2008) Structure and stacking faults in layered Mg–Zn–Y alloys:A first-principles study. In: Acta Materialia, 56 (11). pp. 2531-2539.

De, Joyita and Umarji, AM and Chattopadhyay, K (2007) Origin of contamination and role of mechanochemistry during mechanical alloying: the case of Ag–Te alloys. In: Materials Science and Engineering A, 449-45 . pp. 1062-1066.

Debdutt, Patro and Bhattacharyya, Saswata and Vikram, Jayaram (2007) Flow Kinetics in Porous Ceramics: Understanding with Non-Uniform Capillary Models. In: Journal of the American Ceramic Society, 90 (10). pp. 340-346.

Deevi, SC (1988) Importance of local heating in the compaction of thermally sensitive solids. In: Journal of Physics and Chemistry of Solids, 49 (3). 323 -325.

Deevi, Seetharama C (1988) Effect of mechanical treatment on the reactivity of ammonium perchlorate. In: Journal of Materials Science (full set), 23 (1). 201 -207.

Deka, Angshuman and Nanda, Karuna Kar (2013) Comparison of ZnO films deposited on indium tin oxide and soda lime glass under identical conditions. In: AIP Advances, 3 (6). 062104_1-062104_6.

Deo, N and Natarajan, KA (1998) Biological removal of some flotation collector reagents from aqueous solutions and mineral surfaces. In: Minerals Engineering, 11 (8). pp. 717-738.

Deo, N and Natarajan, KA (1997) Surface modification and biobeneficiation of some oxide minerals using Bacillus polymyxa. In: Minerals and Metallurgical Processing, 14 (3). pp. 32-39.

Deo, Namita and Natarajan, KA (1997) Interaction of Bacillus polymyxa with some oxide minerals with reference to mineral beneficiation and environmental control. In: Minerals Engineering, 10 (12). 1339-1354 .

Deo, Namita and Natarajan, KA (1998) Studies on interaction of Paenibacillus polymyxa with iron ore minerals in relation to beneficiation. In: International Journal of Mineral Processing, 55 (01). pp. 41-60.

Deo, Namita and Natarajan, KA and Rao, Hanumantha K and Forssberg, KSE (1999) Biodegradation of some organic reagents from mineral process effluents. In: Biohydrometallurgy and the Environment Toward the Mining of the 21st Century - Proceedings of the International Biohydrometallurgy Symposium, JUN 20-23, 1999, Madrid, Spain.

Deo, Namita and Natarajan, KA and Somasundaran, P (2001) Mechanisms of adhesion of Paenibacillus polymyxa onto hematite, corundum and quartz. In: International Journal of Mineral Processing, 62 (1-4). pp. 27-39.

Deo, Namita and Vasan, SS and Modak, Jayant M and Natarajan, KA (1999) Selective biodissolution of calcium and iron from bauxite in the presence of Bacillus polymyxa. In: Biohydrometallurgy and the Environment Toward the Mining of the 21st Century - Proceedings of the International Biohydrometallurgy Symposium, JUN 20-23, 1999, Madrid, Spain.

Deo , N and Natarajan, KA (1999) Role of corundum-adapted strains of Bacillus polymyxa in the separation of hematite and alumina. In: Minerals and Metallurgical Processing, 16 (4). pp. 29-34.

Deonath, Bhat RT and Rohatgi, PK (1980) Fluidity of mica particle dispersed aluminium alloy. In: Journal of Materials Science, 15 (11). pp. 2777-2784.

Descloitres, Marc and Ruiz, Laurent and Sekhar, M and Legchenko, Anatoly and Braun, Jean-Jacques and Mohan Kumar, MS and Subramanian, S (2008) Characterization of seasonal local recharge using electrical resistivity tomography and magnetic resonance sounding. In: Hydorlogical Processes, 22 (3). pp. 384-394.

Deshpande, RJ and Nayak, UB (1988) The Amenability Studies on Beneficiation of Low Grade Phyllite Deposits of Tungsten From Degana, Rajasthan. In: Current Science, 41 (4). pp. 307-314.

Deshpande, RJ and Nayak, UB (1989) Flotation of low-grade phyllite deposits of tungsten from Degana, Rajasthan. In: Transactions of the Indian Institute of Metals, 42 (2). pp. 109-114.

Deshpande, RJ and Natarajan, KA (1999) Studies on grinding media wear and its effect on flotation of ferrugenous phosphate ore. In: Minerals Engineering, 12 (9). pp. 1119-1125.

Deshpande, RJ and Natarajan, KA and Kittur, SG and Rao, TRR (1997) Reverse flotation of silica from Kudremukh iron ore .1. Selection of cationic reagents. In: Transactions of the Indian Institute of Metals, 50 (5). pp. 391-396.

Deshpande, RJ and Natarajan, KA and Kittur, SG and Rao, TRR (1997) Reverse flotation of silica from Kudremukh iron ore .2. Optimization of flotation process. In: Transactions of the Indian Institute of Metals, 50 (5). pp. 397-402.

Devarajan, A and Khadar, Abdul M and Chattopadhyay, K (2007) Effect of ball milling on chemically synthesized nanoparticles of $CaCO_3$. In: Materials Science and Engineering: A, 452-45 . pp. 395-400.

Devasia, P and Natarajan, KA and Rao, GR (1996) Role of bacterial growth conditions and adhesion in the bioleaching of chalcopyrite by Thiobacillus ferrooxidans. In: Minerals and Metallurgical Processing, 13 (2). 82-86 .

Devasia, Preston and Natarajan, KA (2010) Adhesion of Acidithiobacillus ferrooxidans to mineral surfaces. In: International Journal of Mineral Processing, 94 (3-4). pp. 135-139.

Devasia, Preston and Natarajan, KA and Sathyanarayana, DN and Rao, Ramananda G (1993) Surface Chemistry of Thiobacillus ferrooxidans Relevant to Adhesion on Mineral Surfaces. In: Applied and Environmental Microbiology, 59 (12). 4051-4055 .

Dey, SR and Roy, Shibayan and Suwas, Satyam and Fundenberger, JJ and Ray, RK (2010) Annealing response of the intermetallic alloy Ti-22Al-25Nb. In: Intermetallics, 18 (6). pp. 1122-1131.

Dey, SR and Suwas, Satyam and Fundenberger, JJ and Ray, RK (2009) Evolution of crystallographic texture and microstructure in the orthorhombic phase of a two-phase alloy Ti-22Al-25Nb. In: Intermetallics, 17 (8). pp. 622-633.

Dey, SR and Suwas, Satyam and Fundenberger, JJ and Zou, JX and Grosdidier, T and Ray, RK (2008) Evolution of hot rolling texture in \beta (B2)-phase of a two-phase (O+B2) titanium–aluminide alloy. In: Materials Science and Engineering: A, 483-48 . pp. 551-554.

Dhandapani, SP and Jayaram, V and Surappa, MK (1994) Growth and microstructure of $Al_2O_3-SiC-Si(Al)$ composites prepared by reactive infiltration of silicon carbide preforms. In: Acta Metallurgica et Materialia, 42 (3). pp. 649-656.

Dhua, SK and Raju, S and Chattopadhyay, K (1991) The liquid immiscibility and associated monotectic reaction in Zn-ln system. In: Metallurgical and Materials Transactions A, 22 (1). pp. 1131-1136.

Divakar, M and Gornerup, M and Lahiri, AK (2001) Dissolution of alumina in stainless steelmaking slags. In: Steel Research, 72 (2). pp. 44-48.

Divakar, M and Gornerup, M and Lahiri, AK (2001) Reduction of iron oxide by carbon in stainless steelmaking slags. In: High Temperature Materials and Processes, 20 (5-6). pp. 393-401.

Divakar, M and Hajra, JP and Jakobsson, A and Seetharaman, S (2000) Thermodynamics of surfaces and adsorption in the Fe-C-S-O system. In: Metallurgical and Materials Transactions B, 31 (2). pp. 267-276.

Divakar, M and Gornerup, M and Lahiri, AK (2002) Simultaneous reduction of oxides and dissolution of alumina in stainless steelmaking slag. In: Ironmaking and Steelmaking, 29 (4). pp. 297-302.

Divakar, M and Hajra, JP (1997) The effect of temperature on the surface tension and adsorption functions of the Fe-S-O melts - an analysis based on interaction parameters. In: Steel Research, 68 (10). pp. 417-423.

Divakar, R and Sundararaman, D and Ranganathan, S (1998) Interfaces In Quasicrystalline Systems. In: MRS Proceedings, 553 . p. 209.

Divakar, R and Sundararaman, D and Ranganathan, S (1998) Interfaces In Quasicrystalline Systems. In: MRS Proceedings, 553 .

Divakar, R and Sundararaman, D and Ranganathan, S (1997) Studies of interfaces in Al-65 Cu20Fe15. In: Bulletin of Materials Science, 20 (4). pp. 519-523.

Divya, VD and Balam, SSK and Ramamurty, U and Paul, A (2010) Interdiffusion in the Ni-Mo system. In: Scripta Materialia, 62 (8). pp. 621-624.

Divya, VD and Ramamurty, U (2010) Interdiffusion Studies in the Co- Mo System. In: 5th International Conference on Diffusion in Solids and Liquids, JUN 24-26, 2009, Rome.

Divya, VD and Ramamurty, U and Paul, A (2011) Interdiffusion and Growth of the Phases in CoNi/Mo and CoNi/W Systems. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 43A (5). pp. 1564-1577.

Divya, VD and Ramamurty, U and Paul, A (2013) Interdiffusion and solid solution strengthening in Ni-Co-Pt and Ni-Co-Fe ternary systems. In: Philosophical Magazine, 93 (17). pp. 2190-2206.

Divya, VD and Ramamurty, U and Paul, A (2010) Topological close packed mu phase formation and the determination of diffusion parameters in the Co-Mo system. In: Intermetallics, 18 (2). pp. 259-266.

Divya, VD and Ramamurty, Upadrasta and Paul, A (2012) Effect of Pt on interdiffusion and mechanical properties of the gamma and gamma ` phases in the Ni-Pt-Al system. In: PHILOSOPHICAL MAGAZINE, 92 (17). pp. 2187-2214.

Divya, Vadegadde Duggappa and Ramamurty, Upadrasta and Paula, Aloke (2011) Interdiffusion and the vacancy wind effect in Ni-Pt and Co-Pt systems. In: Journal of Materials Research, 26 (18). pp. 2384-2393.

Doddamani, MR and Kulkarni, SM and Kishore, * (2011) Behavior of Sandwich Beams With Functionally Graded Rubber Core in Three Point Bending. In: Polymer Composites, 32 (10). pp. 1541-1551.

Drakshayani, DN and Mallya, RM (1991) Reactivity with hydrogen of pure iron oxide and of iron oxides doped with oxides of Mn, Co, Ni and Cu. In: Journal of Thermal Analysis, 37 (5). 891 -906.

Drakshayani, DN and Sankar, Chitra and Mallya, RM (1989) The reduction of manganese nodules by hydrogen. In: Thermochimica Acta, 144 (2). 313-328..

Dubach, A and Raghavan, R and Loeffler, JF and Michler, J and Ramamurty, U (2009) Micropillar compression studies on a bulk metallic glass in different structural states. In: Scripta Materialia, 60 (7). pp. 567-570.

Dubach, Alban and Prasad, K Eswar and Raghavan, Rejin and Loeffler, Joerg F (2009) Free-volume dependent pressure sensitivity of Zr-based bulk metallic glass. In: Journal of Materials Research, 24 (8). pp. 2697-2704.

Durga, S and Nayak, UB (1987) Optimization on molybdenite flotation. In: Transactions of Indian Institute of Metals, 40 (5). pp. 395-406.

Durga, S and Nayak, UB (1990) Selective Flotation of Molybdenite and Chalcopyrite. In: Indian Journal of Technology, 28 (2). 45-48 .

Dutta, B and Samajdar, I and Surappa, MK (1998) Particle redistribution and matrix microstructure evolution during hot extrusion of cast SiCp reinforced aluminium alloy matrix composites. In: Materials Science and Technology, 14 (1). pp. 36-46.

Dutta, B and Surappa, MK (1998) Directional dendritic solidification of a composite slurry: Part I. Dendrite morphology. In: Metallurgical and Materials Transactions A, 29 (4). pp. 1319-1327.

Dutta, B and Surappa, MK (1998) Directional dendritic solidification of a composite slurry: Part II. Particle distribution. In: Metallurgical and Materials Transactions A, 29 (4). pp. 1329-1339.

Dutta, B and Surappa, MK (1998) Microstructure evolution during multidirectional solidification of Al-Cu-SiC composites. In: Composites Part A, 29A (5-6). pp. 565-573.

Dutta, B and Surappa, MK (1997) Studies on age-hardening characteristics of ceramic particle/matrix interfaces in Al-Cu-SiCp composites using ultra low-load-dynamic microhardness measurements. In: Journal of Materials Research, 12 (10). pp. 2773-2778.

Dwarakadasa, ES (1993) Low Temperature Microscopy and Analysis by Patric Echlin. In: Journal of the Electrochemical Society of India, 42 (4). p. 263.

Dwarakadasa, ES and Raman, KS and Vasu, KI (1968) Beryllium-vacancy interaction in an Al-4.4%Zn-0.3%Be alloy. In: Scripta Metallurgica, 2 (11). pp. 639-642.

Dwarakadasa, ES and Raman, KS and Vasu, KI (1969) Comments on ‘beryllium-vacancy interaction in Al-based alloys. In: Scripta Metallurgica, 3 (5). pp. 291-292.

Dwarakadasa, ES and Raman, KS and Vasu, KI (1969) On the influence of beryllium atoms on the resistivity changes due to clustering in Al--4.4%Zn alloy at 0°C. In: Scripta Metallurgica, 3 (5). pp. 327-331.

Dzwonczyk, Joanna and Prasad, Yellapregada Venkata Rama Krishna and Hort, Norbert and Kainer, Karl Ulrich (2006) Enhancement of workability in AZ31 alloy-processing maps: Part I,castmaterial. In: Advanced Engineering Materials, 8 (10). pp. 966-973.

E

Emge, A and Karthikeyan, S and Rigney, DA (2009) The effects of sliding velocity and sliding time on nanocrystalline tribolayer development and properties in copper. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 562-567.

Emge, Andrew and Karthikeyan, S and Kim, HJ and Rigney, DA (2007) The effect of sliding velocity on the tribological behavior of copper. In: Wear, 263 (1-6). pp. 614-618.

Eric A, Lord and Alan L, Mackay (2003) Periodic minimal surfaces of cubic symmetry. In: Current Science, 85 (3). pp. 346-362.

F

Fechner, D and Dieringa, H and Maier, P and Kainer, KU and Mondal, AK and Kumar, S (2007) Interrupted creep of newly developed high pressure die cast Magnesium Alloys. In: Procs, Of Processing And Fabrication Of Advanced Materials Xvi, , Dec 2007 , Singapore.

Fegredo, DM and Balachandra, J (2008) Studies in the Electro-deposition of cobalt from fluoborate baths. In: Journal of Indian Institute of Science, 88 (3). pp. 782-792.

Fitzner, K and Alcock, CB and Jacob, KT (1977) Solubility and activity of oxygen in liquid germanium and germanium copper alloys. In: Metallurgical and Materials Transactions B, 8 (4). pp. 669-674.

Fitzner, K and Jacob, KT (1977) Solubility and activity of oxygen in liquid indium and copper indium alloys. In: Journal of the Less Common Metals, 52 (2). pp. 279-291.

Foryst, Pawlas E and Jacob, Thomas K and Fitzner, K (2006) Thermodynamics of $GdMnO_3$ and $GdMn_2O_5$ Phases Determined by the E.M.F Method. In: Archives of Metallurgy and Materials, 51 (3). pp. 481-488.

Frazier, WG and Seshacharyulu, T and Medeiros, SC and Prasad, YVRK (2002) Control of transient thermal response during sequential open-die forging: A trajectory optimization approach. In: Journal of Manufacturing Science and Engineering, 124 (3). pp. 502-508.

Fuxiao, YU and Dwarakadasa, ES and Ranganathan, S (1999) Distribution of lead in lead-containing aluminium alloys obtained by liquid phase co-spray forming technique. In: Bulletin of Materials Science, 22 (6). pp. 959-963.

Fuxiao, Yu and Jianzhong, Cui and Ranganathan, S and Dwarakadasa, ES (2001) Fundamental differences between spray forming and other semisolid processes. In: Materials Science and Engineering A, 304-30 . pp. 621-626.

G

Gadgil, Sulochana and Joseph, PV and Joshi, NV (1984) Ocean atmosphere coupling over monsoon regions. In: Nature, 312 (5990). pp. 141-143.

Gandhi, AS and Jayaram, V and Chokshi, AH (1999) Densification studies on amorphous $ZrO_2-Al_2O_3$ powders. In: Proceedings of Creep Behavior of Advanced Materials for the 21st Century. TMS Annual Meeting, 28 Feb.-4 March 1999, San Deigo, CA, USA, pp. 369-378.

Gandhi, AS and Jayaram, V (2003) Plastically deforming amorphous $ZrO_2-Al_2O_3$. In: Acta Materialia, 51 (6). pp. 1641-1649.

Gandhi, AS and Jayaram, V (1999) Pressure Consolidation of Amorphous ZrO2-Al2O3 by Plastic Deformation of Powder Particles. [Preprint]

Gandhi, AS and Jayaram, V (2002) Pressure consolidation of amorphous $ZrO_2–Al_2O_3$ by plastic deformation of powder particles. In: Acta Materialia, 50 (8). pp. 2137-2149.

Gandhi, AS and Jayaram, V and Chokshi, AH (1999) Densification studies on amorphous ZrO2-Al2O3 powders. In: Symposium on Creep Behavior of Advanced Materials for the 21st-Century, at the 1999 TMS Annual Meeting, FEB 28-MAR 04, 1999, San Diego, California.

Gandhi, AS and Jayaram, V and Chokshi, AH (2001) Low temperature densification behaviour of metastable phases in $ZrO_2–Al_2O_3$ powders produced by spray pyrolysis. In: Materials Science and Engineering A, 304-30 . pp. 785-789.

Gandhi, AS and Jayaram, V and Chokshi, AH (1997) Phase evolution and densification of spray pyrolysed ZrO2-Al2O3 powders. In: Materials Science Forum, 243 . 227-232 .

Gandhi, AS and Saravanan, A and Jayaram, V (1996) Containerless processing of ceramics by aerodynamic levitation. In: Materials Science & Engineering A, 221 (1-2). pp. 68-75.

Gandhi, Ashutosh S and Vikram, Jayaram and Chokshi, Atul H (1999) Dense Amorphous Zirconia-Alumina by Low Temperature Consolidation of Spray Pyrolyzed Powders. [Preprint]

Ganganagappa, Nagaraju and Siddaramanna, Ashoka (2012) One step synthesis of monoclinic VO2 (B) bundles of nanorods: Cathode for Li ion battery. In: MATERIALS CHARACTERIZATION, 68 . pp. 58-62.

Garg, Rohini and Ranganathan, S and Suwas, Satyam (2010) Effect of mode of rolling on development of texture and microstructure in two-phase (alpha plus beta) brass. In: Materials Science and Engineering A, 527 (18-19). pp. 4582-4592.

Garg, Rohini and Rao, Badari Narayana and Senyshyn, Anatoliy and Krishna, PSR. and Ranjan, Rajeev (2013) Lead-free piezoelectric system (Na0.5Bi0.5)TiO3-BaTiO3: Equilibrium structures and irreversible structural transformations driven by electric field and mechanical impact. In: PHYSICAL REVIEW B, 88 (1).

Garg, Rohini and Rao, Badari Narayana and Senyshyn, Anatoliy and Ranjan, Rajeev (2013) Long ranged structural modulation in the pre-morphotropic phase boundary cubic-like state of the lead-free piezoelectric Na1/2Bi1/2TiO3-BaTiO3. In: JOURNAL OF APPLIED PHYSICS, 114 (23).

Garg, Rohini and Senyshyn, Anatoliy and Boysen, Hans and Ranjan, Rajeev (2008) Structure and phase transition of Na0.5La0.5TiO3. In: Journal of Physics:Condensed Matter, 20 (50). pp. 505215-1.

Garg, Rohini and Senyshyn, Anatoliy and Boysen, Hans and Ranjan, Rajeev (2009) Structure of the noncubic phase in the ferroelectric state of Pr-substituted SrTiO3. In: Physical Review B, 79 (14).

Garg, Rohini and Senyshyn, Anatoliy and Ranjan, Rajeev (2012) Complex structural phase transitions in slightly Ca modified Na0.5Bi0.5TiO3. In: JOURNAL OF PHYSICS-CONDENSED MATTER, 24 (45).

Gayathri, N and Goswami, R and Banerjee, S (1997) Electrical resistivity and point contact studies on Al-Pd-Mn icosahedral quasicrystals. In: Bulletin of Material Science, 20 (4). pp. 531-534.

Gayen, Arup and Baidya, Tinku and Biswas, Krishanu and Roy, Sounak and Hegde, MS (2006) Synthesis, structure and three way catalytic activity of $Ce_{1-x}Pt_{x/2}Rh_{x/2}O_{2-\delta}$ (x = 0.01 and 0.02) nano-crystallites: Synergistic effect in bimetal ionic catalysts. In: Applied Catalysis A: General, 315 . pp. 135-146.

Ghosh, Anirban and Sahu, Jyoti Ranjan and Bhat, S Venkataprasad and Rao, CNR (2009) A Raman study of multiferroic LuMnO3. In: Solid State Sciences, 11 (9). pp. 1639-1642.

Ghosh, C (2011) Flux Partitioning of Species Approach in Binary Interdiffusion Process. In: Journal of Phase Equilibria and Diffusion, 32 (5). pp. 418-421.

Ghosh, C (2010) Interdiffusion study in binary gold-tin system. In: Intermetallics, 18 (11). pp. 2178-2182.

Ghosh, C (2013) Study on important diffusion parameters of binary Ni3Sn4 phase. In: Journal of Materials Science: Materials in Electronics, 24 (7). pp. 2558-2561.

Ghosh, C and Paul, A (2009) Different phenomenological theories and their abilities to describe the interdiffusion process in a binary system during multiphase growth. In: Acta Materialia, 57 (2). pp. 493-502.

Ghosh, C and Paul, A (2008) Elucidation of bifurcation of the Kirkendall marker plane in a single phase using physico-chemical approach. In: Intermetallics, 16 (8). pp. 955-961.

Ghosh, C and Paul, A (2007) A physico-chemical approach in binary solid-state interdiffusion. In: Acta Materialia, 55 (6). pp. 1927-1939.

Ghosh, S and Chokshi, AH (2007) Microstructural Design for Superplasticity in Ceramics. In: Procs. Of Frontiers In The Design Of Materials, , 2007, Chennai, India.

Ghosh, Santonu and Chokshi, Atul H and Lee, Pilhwa and Raj, Rishi (2009) A Huge Effect of Weak dc Electrical Fields on Grain Growth in Zirconia. In: Journal of the American Ceramic Society, 92 (8). pp. 1856-1859.

Ghosh, Santonu and Kilo, Martin and Borchardt, Guenter and Chokshi, Atul H (2009) Diffusion and Creep in Silica-Doped Tetragonal Zirconia. In: Journal of the American Ceramic Society, 92 (12). pp. 3004-3013.

Ghosh, Santonu and Swaroop, Sathya and Fielitz, Peter and Borchardt, Guenter and Chokshi, Atul H (2011) Influence of grain boundary sliding on diffusion in yttria doped zirconia. In: Journal of the European Ceramic Society, 31 (6). pp. 1027-1032.

Gibbons, PC and Kelton, KF and Ranganathan, S and Daulton, TL (2000) Kikuchi bands in quasicrystals and their approximants. In: Philosophical Magazine A, 80 (4). pp. 843-852.

Giri, Sushi K and Krishnan, Madangopal and Ramamurty, U (2010) Enhancement of fatigue life of Ni-Ti-Fe shape memory alloys by thermal cycling. In: Materials Science and Engineering A, 528 (1). pp. 363-370.

Giridhar, R and Surappa, MK (1993) Effect of Aging on Impact Fracture Behavior of 2024Al-$Al_2O_3P$ Composites Made by Casting Route. In: The Ninth International Conference on Composite Materials, 1993, pp. 219-226.

Girija, K and Thirumalairajan, S and Avadhani, GS and Mahgalaraj, D and Ponpandian, N and Viswanathan, C (2013) Synthesis, morphology, optical and photocatalytic performance of nanostructured beta-Ga2O3. In: Materials Research Bulletin, 48 (6). pp. 2296-2303.

Gnanadhas, Divya Prakash and Ben Thomas, Midhun and Elango, Monalisha and Raichur, Ashok M and Chakravortty, Dipshikha (2013) Chitosan-dextran sulphate nanocapsule drug delivery system as an effective therapeutic against intraphagosomal pathogen Salmonella. In: Journal of Antimicrobial Chemotherapy, 68 (11). pp. 2576-2586.

Gnanadhas, Divya Prakash and Ben Thomas, Midhun and Thomas, Rony and Raichur, Ashok M and Chakravortty, Dipshikha (2013) Interaction of Silver Nanoparticles with Serum Proteins Affects Their Antimicrobial Activity In Vivo. In: ANTIMICROBIAL AGENTS AND CHEMOTHERAPY, 57 (10). pp. 4945-4955.

Gokhale, AA and Ramamurty, U (2007) Production, Properties and Applications of Aluminium Foams. In: Procs. International Conference On Aluminium, INCAL 2007, , Nov. 2007, Hyderabad.

Gollapudi, S and Azeem, MA and Tewari, A and Ramamurty, U (2011) Orientation dependence of the indentation impression morphology in a Mg alloy. In: Scripta Materialia, 64 (2). pp. 189-192.

Gollerthan, S and Young, ML and Neuking, K and Ramamurty, U and Eggeler, G (2009) Direct physical evidence for the back-transformation of stress-induced martensite in the vicinity of cracks in pseudoelastic NiTi shape memory alloys. In: Acta Materialia, 57 (19). pp. 5892-5897.

Gopal, Judy and Muraleedharan, P and George, RP and Sarvamangala, H and Kalaichelvan, PT and Khatak, HS and Natarajan, KA (2007) Morphological differentiation observed in manganese oxidizing bacterial colonies. In: National Academy Science Letters (India), 30 (11-12). pp. 371-375.

Gopalan, Veena E and Malini, KA and Saravanan, S and Kumar, Sakthi D and Yoshida, Yasuhiko and Anantharaman, MR (2008) Evidence for polaron conduction in nanostructured manganese ferrite. In: Journal of Physics D-Applied Physics, 41 (18). pp. 185005-1.

Gopinath, K and Gogia, AK and Kamat, SV and Balamuralikrishnan, R and Ramamurty, U (2009) Low cycle fatigue behaviour of a low interstitial Ni-base superalloy. In: Acta Materialia, 57 (12). pp. 3450-3459.

Gopinath, K and Gogia, AK and Kamat, SV and Balamuralikrishnan, R and Ramamurty, U (2008) Tensile Properties of Ni-Based Superalloy 720Li: Temperature and Strain Rate Effects. In: Metallurgical and Materials Transactions A, 39 (10). pp. 2340-2350.

Gopinath, K and Gogia, AK and Kamat, SV and Ramamurty, U (2009) Dynamic strain ageing in Ni-base superalloy 720Li. In: Acta Materialia, 57 (4). pp. 1243-1253.

Goran, D and Fundenberger, JJ and Bouzy, E and Skrotzki, W and Suwas, S and Grosdidier, T and Toth, LS (2011) Local texture and microstructure in cube-oriented nickel single crystal deformed by equal channel angular extrusion. In: Philosophical Magazine, 91 (2). pp. 291-309.

Goran, D and Fundenberger, JJ and Toth, LS and Grosdidier, T (2012) Equal channel angular pressing processing routes and associated structure modification: a differential scanning calorimetry and X-ray line profile analysis. In: Powder Diffraction, 27 (3). pp. 194-199.

Gornerup, M and Lahiri, AK (1998) Reduction of electric are furnace slags in stainless steelmaking - Part 1 Observations. In: Ironmaking and Steelmaking, 25 (4). pp. 317-322.

Gornerup, M and Lahiri, AK (1998) Reduction of electric arc furnace slags in stainless steelmaking - Part 2 Mechanism of CrOx reduction. In: Ironmaking and Steelmaking, 25 (5). pp. 382-386.

Goswami, Ankur and Umarji, AM and Madras, Giridhar (2010) Degradation Kinetics of Poly(HDDA-co-MMA). In: Journal of Applied Polymer Science, 117 (4). pp. 2444-2453.

Goswami, R and Banerjee, S and Chattopadhyay, K and Raychaudhuri, AK (1993) Superconductivity in rapidly quenched metallic systems with nanoscale structure. In: Journal of Applied Physics, 73 (6). pp. 2934-2940.

Goswami, R and Chattopadhyay, K (1996) Depression of melting point of multidomained bismuth in aluminum based metallic glass nanocomposites. In: Applied Physics Letters, 69 (7). pp. 910-912.

Goswami, R and Chattopadhyay, K (1995) Heterogeneous nucleation of nanometre-sized Bi particles embedded in a Zn matrix. In: Philosophical Magazine Letters, 72 (6). pp. 411-416.

Goswami, R and Chattopadhyay, K (1994) Microstructural developments in rapidly solidified monotectic alloys. In: Eighth International Conference on Rapidly Quenched and Metastable Materials, 22-27 Aug. 1993, Sendai, Japan, pp. 163-167.

Goswami, R and Chattopadhyay, K (1994) Microstructural evolution and transformation pathways in the near monotectic Zn rich Zn-Bi alloys during rapid solidification. In: Acta Metallurgica et Materialia, 42 (2). pp. 383-393.

Goswami, R and Chattopadhyay, K (1996) The Solidification Behaviour of Bi Particles Embedded in an Al Matrix. In: Acta Materialia, 44 (6). pp. 2421-2429.

Goswami, R and Chattopadhyay, K (1995) The superheating and the crystallography of embedded Pb particles in f.c.c. Al, Cu and Ni matrices. In: Acta Metallurgica et Materialia, 43 (7). pp. 2837-2847.

Goswami, R and Chattopadhyay, K and Kim, WT and Cantor, B (1992) Heterogeneous nucleation of pb particles embedded in a Zn matrix. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (12). pp. 3207-3218.

Goswami, R and Chattopadhyay, K and Ryder, PL (1998) Melting of Pb particles embedded in Cu-Zn matrices. In: Acta Materialia, 46 (12). pp. 4257-4271.

Goswami, R and Ryder, P and Chattopadhyay, K (1999) The melting and solidification of nanoscale Bi particles embedded in a glassy and crystalline matrix. In: Philosophical Magazine Letters, 79 (7). 481-489 .

Gowda, Prarthana and Kumar, Praveen and Tripathi, Rahul and Misra, Abha (2014) Electric field induced ultra-high actuation in a bulk carbon nanotube structure. In: CARBON, 67 . pp. 546-553.

Goyal, A and Murty, BS and Ranganathan, S (1993) Crystallization studies on amorphous AI-Y-Ni and AI-Y-Cu alloys. In: Journal of Materials Science (full set), 28 (22). pp. 6091-6095.

Gunda, R and Biswas, SK and Bhowmick, S and Jayaram, V (2005) Mechanical Properties of Rough TiN Coating Deposited on Steel by Cathodic Arc Evaporation Technique. In: Journal of The American Ceramic Society, 88 (7). pp. 1831-1837.

Gundewar, CS and Natarajan, KA and Nayak, UB and Satyanarayana, K (1990) Laboratory studies on ball wear in the grinding of a hematite-magnetite ore. In: International Journal of Mineral Processing, 29 (1-2). pp. 121-139.

Gupta, GS and Hind, G (2004) An Object-Oriented Modeling Approach in Materials Processing: Case Study of the Acheson and Carburizing Processes. In: Materials and Manufacturing Processes, 19 (2). pp. 221-242.

Gupta, GS and Litster, JD and White, ET and Rudolph, VR (1997) Nonwetting flow of a liquid through a packed bed with gas cross-flow. In: Metallurgical and Materials Transactions B, 28 (4). pp. 597-604.

Gupta, GS and Naveen, K (2007) Quantification of Liquid Holdup in the Dropping Zone of a Blast Furnace- A Cold Model Study. In: Metallurgical and Materials Transactions B, 38 (2). pp. 203-213.

Gupta, GS and Rajneesh, S and Rudolph, V and Singh, V and Sarkar, S and Litster, JD (2005) Mechanics of raceway hysteresis in a packed bed. In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 36 (6). pp. 755-764.

Gupta, Ankur and Tripathi, Garima and Basu, Bikramjit and Balani, Kantesh (2012) Dependence of Protein Adsorption on Wetting Behavior of UHMWPE-HA-Al2O3-CNT Hybrid Biocomposites. In: Journal of Minerals, 64 (4). pp. 506-513.

Gupta, D and Lahir, AK (1996) A water model study of the flow asymmetry inside a continuous slab casting mold. In: Metallurgical and Materials Transactions B, 27 (05). pp. 757-764.

Gupta, D and Lahiri, AK (1996) Cold model study of slag entrainment into liquid steel in continuous slab caster. In: Ironmaking and Steelmaking, 23 (4). 361-363 .

Gupta, D and Lahiri, AK (1992) Water Modeling Study Of The Jet Characteristics In A Continuous-Casting Mold. In: Steel Research, 63 (5). pp. 201-204.

Gupta, D and Subramaniam, S and Lahiri, AK (1991) Study Of Fluid-Flow And Residence-Time Distribution In A Continuous Slab Casting Mold. In: Steel Research, 62 (11). pp. 496-500.

Gupta, Dharmendr and Chakraborty, Snehasis and Lahiri, AK (1997) Asymmetry and oscillation of the fluid flow pattern in a continuous casting mould: A water model study. In: ISIJ International, 37 (7). pp. 654-658.

Gupta, Dharmendra and Lahir, AK (1996) Cold model study of the surface profile in a continuous slab casting mold: Effect of second phase. In: Metallurgical and Materials Transactions A, 27 (4). pp. 695-697.

Gupta, Dharmendra and Lahiri, AK (1994) Water-modeling study of the surface disturbances in continuous slab caster. In: Metallurgical and Materials Transactions A, 25 (2). pp. 227-233.

Gupta, GS and Bhattacharyya, S (2003) Liquid Holdup in Non-wetting Packing with Lateral Gas Injection. In: ISIJ International, 43 (12). pp. 1927-1935.

Gupta, GS and Chaudhuri, A and Kumar, PV (2002) Modelling, simulation, and graphical user interface for industrial gas carburising process. In: Materials Science and Technology, 18 (10). pp. 1188-1194.

Gupta, GS and Kitamura, S and Ariyama, T (2007) Recent advances in blast furnace modeling in India. In: Procs. Of 54th JSPS Meeting On Iron Making Practices,, June 2007 , New Haven, Connecticut.

Gupta, GS and Kumar, PV and Rudolph, VR and Gupta, M (2001) Heat-transfer model for the Acheson process. In: Metallurgical And Materials Transactions A, 32 (6). pp. 1301-1308.

Gupta, Govind S and Naveen, K (2006) Cold model study of local liquid holdup in the dropping zone using x-ray. In: International Conference on Advances in Materials and Materials Processing ICAMMP 2006, 2006, India.

Gupta, Govind Sharan (2005) Prediction of cavity size in the packed bed systems using new correlations and mathematical model. Patent Number(s) WO 2005010218 A1. Patent Assignee(s) Council of Scientific and Industrial Research.

Gupta, M and Surappa, MK (1995) Effect of Increase in Heterogeneous Nucleation Sites on the Aging Behavior of 6061/SiC Metal Matrix Composites. In: Materials Research Bulletin, 30 (8). pp. 1023-1030.

Gupta, M and Surappa, MK (1995) Effect of weight percentage of SiC particulates on the ageing behaviour of 6061/SiC metal matrix composites. In: Journal of Materials Science Letters, 14 (18). pp. 1283-1285.

Gupta, M and Surappa, MK and Qin, S (1997) Effect of interfacial characteristics on the failure-mechanism mode of a SiC reinforced Al based metal-matrix composite. In: Journal of Materials Processing Technology, 67 (1-3). pp. 94-99.

Gupta, M and Surappa, MK and Qin, S and Tham, LM (1998) Regarding the effect of aging heat treatment on the failure behaviour of a SiC reinforced Al based metal matrix composite. In: Indian Journal of Engineering and Materials Sciences, 5 (1). pp. 1-8.

Gupta, N and Sankaran, S and Woldesenbet, E and Kishore, * (2001) Studies on compressive failure features in syntactic foam material. In: Journal of Materials Science, 36 (18). pp. 4485-4491.

Gupta, N and Woldesenbet, E and Kishore, * (2002) Compressive fracture features of syntactic foams-microscopic examination. In: Journal of Materials Science (full set), 37 (15). pp. 3199-3209.

Gupta, Neha and Mukhopadhyay, Amartya and Pavani, K and Basu, Bikramjit (2012) Spark plasma sintering of novel ZrB2-SiC-TiSi2 composites with better mechanical properties. In: Materials Science and Engineering: A, 534 . pp. 111-118.

Gupta, Nikhil and Karthikeyan, CS and Sankaran, S and Kishore, * (1999) Correlation of Processing Methodology to the Physical and Mechanical Properties of Syntactic Foams With and Without Fibers. In: Materials Characterization, 43 (4). pp. 271-277.

Gupta, S and Samanta, MK and Raichur, AM (2010) Dual-Drug Delivery System Based on In Situ Gel-Forming Nanosuspension of Forskolin to Enhance Antiglaucoma Efficacy. In: AAPS PharmSciTech, 11 (1). pp. 322-335.

Gupta, SC and Lahiri, AK (1979) Heat conduction with a phase change in a cylindrical mould. In: International Journal of Engineering Science, 17 (4). pp. 401-407.

Gupta, Satyajit and Ramamurthy, Praveen C and Madras, Giridhar (2011) Covalent Grafting of Polydimethylsiloxane over Surface-Modified Alumina Nanoparticles. In: Industrial & Engineering Chemistry Research, 50 (11). pp. 6585-6593.

Gupta, Satyajit and Ramamurthy, Praveen C and Madras, Giridhar (2011) Mechanistic overview of the curing behavior of hydride terminated polydimethylsiloxane with allyl functionalized alumina by calorimetry and rheometry. In: Thermochimica Acta, 524 (1-2). pp. 74-79.

Gupta, Satyajit and Ramamurthy, Praveen C and Madras, Giridhar (2011) Synthesis and characterization of flexible epoxy nanocomposites reinforced with amine functionalized alumina nanoparticles: a potential encapsulant for organic devices. In: Polymer Chemistry , 2 (1). pp. 221-228.

Gupta, Satyajit and Ramamurthy, Praveen C and Madras, Giridhar (2011) Synthesis and characterization of silicone polymer/functionalized mesostructured silica composites. In: Polymer Chemistry, 2 (11). pp. 2643-2650.

Gupta, Satyajit and Seethamraju, Sindhu and Ramamurthy, Praveen Chandrashekarapura and Madras, Giridhar (2013) Polyvinylbutyral based hybrid organic/inorganic films as a moisture barrier material. In: Industrial and Engineering Chemistry Research, 52 (12). pp. 4383-4394.

Gurao, NP and Kapoor, Rajeev and Suwas, Satyam (2011) Deformation behaviour of commercially pure titanium at extreme strain rates. In: Acta Materialia, 59 (9). pp. 3431-3446.

Gurao, NP and Kapoor, Rajeev and Suwas, Satyam (2012) Texture evolution in high strain rate deformed Cu-10Zn alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 558 . pp. 761-765.

Gurao, NP and Kumar, P and Sarkar, A and Brokmeier, HG and Suwas, Satyam (2013) Simulation of Deformation Texture Evolution During Multi Axial Forging of Interstitial Free Steel. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (4). pp. 1004-1009.

Gurao, NP and Manivasagam, Geetha and Govindaraj, P and Asokamani, R and Suwas, Satyam (2013) Effect of Texture and Grain Size on Bio-Corrosion Response of Ultrafine-Grained Titanium. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (12). pp. 5602-5610.

Gurao, NP and Sethuraman, S and Suwas, Satyam (2011) Effect of strain path change on the evolution of texture and microstructure during rolling of copper and nickel. In: Materials Science and Engineering A, 528 (25-26). pp. 7739-7750.

Gurao, NP and Sethuraman, S and Suwas, Satyam (2013) Evolution of Texture and Microstructure in Commercially Pure Titanium with Change in Strain Path During Rolling. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (3). pp. 1497-1507.

Gurao, NP and Suwas, Satyam (2013) Deformation behaviour at macro- and nano-length scales: The development of orientation gradients. In: Materials Letters, 99 . pp. 81-85.

Gurao, NP and Suwas, Satyam (2009) Deformation mechanisms during large strain deformation of nanocrystalline nickel. In: Applied Physics Letters, 94 (19). 191902-1-191902-3.

Gurao, NP and Suwas, Satyam (2011) Evolution of crystallographic texture during deformation of submicron grain size titanium. In: Journal of Materials Research, 26 (4). pp. 523-532.

Gurao, NP and Suwas, Satyam (2011) Texture evolution and operative mechanisms during large-strain deformation of nanocrystalline nickel. In: Philosophical Magazine, 91 (5). pp. 798-817.

Gurao, Nilesh and Suwas, Satyam and Kapoor, Rajeev (2009) Study of Texture Evolution at High Strain Rates in FCC Materials. In: 15th International Conference on Textures of Materials, 15th International Conference on Textures of Materials, Pittsburgh, PA, pp. 73-81.

Gurao, Nilesh P and Ashkar, Ali A and Suwas, Satyam (2009) Study of texture evolution in metastable beta-Ti alloy as a function of strain path and its effect on alpha transformation texture. In: Materials Science and Engineering: A, 504 (1-2). pp. 24-35.

Gurao, Nilesh P and Kapoor, Rajeev and Suwas, Satyam (2010) Effect of Strain Rate on Evolution of the Deformation Microstructure and Texture in Polycrystalline Copper and Nickel. In: Metallurgical and Materials Transactions A, 41A (11). pp. 2794-2804.

Gururajan, MP and Abinandanan, TA (2001) Correlation between bond energies and point-defect behaviour in B2 intermetallics. In: Philosophicul Muguzine A, 81 (12). pp. 2785-2795.

Gururajan, MP and Abinandanan, TA (2000) Mean field theory of point defects in $\beta -NiAl$. In: Intermetallics, 8 (7). pp. 759-767.

Gururajan, MP and Abinandanan, TA (2006) Microstructural evolution in elastically inhomogeneous systems: I. A phase field formulation. [Preprint]

Gururajan, MP and Abinandanan, TA (2006) Microstructural evolution in elastically inhomogeneous systems: II. Application to rafting. [Preprint]

Gururajan, MP and Abinandanan, TA (2007) Phase inversion in two-phase solid systems driven by an elastic modulus mismatch. In: Philosophical Magazine, 87 (33). pp. 5279-5288.

Gururajana, MP and Abinandanan, TA (2007) Phase field study of precipitate rafting under a uniaxial stress. In: Acta Materialia, 55 (15). pp. 5015-5026.

Guruvenket, S and Komath, Manoj and Vijayalakshmi, SP and Raichur, AM and Rao, Mohan G (2003) Wettability enhancement of polystyrene with electron cyclotron resonance plasma with argon. In: Journal of Applied Polymer Science, 90 (6). pp. 1618-1623.

Guruvenket, S and Rao, Mohan G and Komath, Manoj and Raichur, Ashok M (2004) Plasma surface modification of polystyrene and polyethylene. In: Applied Surface Science, 236 (1-4). pp. 278-284.

H

Hajra, JP (1987) A new formalism for representation of heat capacities of metals. In: Bulletin of Materials Science, 9 (3). pp. 241-247.

Hajra, JP and Ray, T and Acharya, S (2005) Thermodynamics and adsorption behaviour of the nano phases in the bi-sn system. In: Journal of Computational and Theoretical Nanoscience, 2 (2). pp. 319-327.

Hajra, JP and Venkatraman, M and Ranganathan, S (1986) Thermodynamics and phase equilibria in the Co-Ni-Mn system. In: Transactions of the Indian Institute of Metals, 39 (3). pp. 211-218.

Hajra, Jnan P and Aldinger, Fritz and Seifert, Hans J (2003) Derivation and applicability of the partial functions of the ternary system using interaction coefficients. In: Steel GRIPS, 1 (5). pp. 353-360.

Hajra, JP (1991) Representation of Excess Thermodynamic Properties of Ternary Systems Using Interaction Parameters. In: Metallurgical and Materials Transactions B, 22 (5). pp. 583-591.

Hajra, JP (1989) Thermodynamic consistency of the ternary functions. In: Metallurgical and Materials Transactions A, 20 (10). pp. 2047-2055.

Hajra, JP (1979) Thermodynamics of Cu---Mn alloys. In: Scripta Metallurgica, 13 (3). pp. 173-175.

Hajra, JP (1980) A new formalism for representation of binary thermodynamic data. In: Metallurgical and Materials Transactions B, 11 (2). pp. 215-219.

Hajra, JP and Divakar, M (1996) Applicability of Butler's equation in interpreting the thermodynamic behavior of surfaces and adsorption in Fe-S-O melts. In: Metallurgical and Materials Transactions A, 27 (2). pp. 241-253.

Hajra, JP and Divakar, M (1999) Thermodynamics of surfaces and adsorption in the Fe-S, Fe-N, and Fe-S-N systems at 1823 K. In: Metallurgical and Materials Transactions A, 30 (3). pp. 429-433.

Hajra, JP and Jayaganthan, R and Divakar, M (1997) Representation of thermodynamic properties of quaternary systems using interaction parameters. In: Steel Research, 68 (9). pp. 375-382.

Hajra, JP and Lee, Hong-Kee and Frohberg, Martin G (1992) Representation of thermodynamic properties of ternary systems and its application to the system silver-gold-copper at 1350 K. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 23 (6). pp. 747-752.

Hajra, JP and Mazumdar, B (1991) Thermodynamics of Binary Systems using Interaction Parameters. In: Metallurgical and Materials Transactions B, 22 (5). pp. 593-605.

Hajra, JP and Rajasekharam, P (1993) Thermodynamics of surfaces and adsorption in binary metallic systems. In: Scripta Metallurgica et Materialia, 29 (10). pp. 1297-1302.

Hajra, JP and Reddy, Ravindra S and Frohberg, MG (1995) Derivation and consistency of the partial functions of the ternary system involving interaction coefficients. In: Metallurgical and Materials Transactions B, 26 (3). pp. 495-502.

Hajra, JP and Sinha, AK (1987) Applicability of various formalisms in interpretation of thermodynamic properties and phase equilibria in Zn-based systems. In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 11 (3). pp. 247-252.

Hajra, Jnan P and Frohberg, Martin G (1992) Integral treatment for the representation of thermodynamic properties in multicomponent systems using interaction parameters. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 23 (1). pp. 23-28.

Hanabe, Murali and Jayaram, Vikram and Bhaskaran, TA (1996) Growth of $Al_2O_3/Al$ Composites from Al-Zn Alloys. In: Acta Materialia, 44 (2). pp. 819-829.

Harshavardhan, Solomon K and Yalamanchi, RS and Rao, Kameswara L (1989) Formation of crystalline diamond from amorphous diamond-like carbon films by pulsed laser irradiation. In: Applied Physics Letters, 55 (4). pp. 351-353.

Hashim, Mohd and Alimuddin, * and Shirsath, Sagar E and Kumar, Shalendra and Kumar, Ravi and Roy, Aashis S and Shah, Jyoti and Kotnala, RK (2013) Preparation and characterization chemistry of nano-crystalline Ni-Cu-Zn ferrite. In: JOURNAL OF ALLOYS AND COMPOUNDS, 549 . pp. 348-357.

Hazra, M and Mondal, AK and Kumar, S and Blawert, C and Dahotre, Narendra B (2009) Laser surface cladding of MRI 153M magnesium alloy with (Al+Al2O3). In: Surface and Coatings Technology, 203 (16). pp. 2292-2299.

Hebsur, MG and Abraham, KP and Prasad, YVRK (1980) Hot-Working Characteristics of Electroslag-Refined En52 Steel: A Hot-Torsion Study. In: Metals Technology, 7 (DEC). pp. 483-487.

Hebsur, Mohan G and Abraham, KP and Prasad, YVRK (1980) Effect of electroslag refining on the fracture toughness and fatigue crack propagation rates in heat treated AISI 4340 steel. In: Engineering Fracture Mechanics, 13 (4). pp. 851-864.

Hebsur, Mohan G and Abraham, KP and Prasad, YVRK (1980) Fatigue crack growth rates and fracture toughness in electroslag refined En 52 steel. In: International Journal of Fatigue, 2 (4). pp. 147-152.

Hebsur, Mohan G and Abraham, KP and Prasad, YVRK (1981) Influence of electroslag refining on the hot ductility of AISI 4340 steel in torsion. In: Journal of Mechanical Working Technology, 4 (4). pp. 341-349.

Hegde, MS and Kumar, Sampath TS and Mallya, RM (1983) A Study Of Surface Segregation And Oxidation Of Cu-Mn Alloys By X-Ray Photoelectron And Auger Spectroscopy. In: Applications of Surface Science, 17 (1). pp. 97-106.

Hegde, MS and Kumar, Sampath TS and Mallya, RM (1987) XPS, UPS and AES study of surface segregation and oxidation of nickel-ruthenium alloy: evidence for decrease in dissociation temperature of nickel oxide in the presence of ruthenium. In: Surface Science, 188 (1-2). pp. 255-66.

Hegde, MS and Satyalakshmi, KM and Mallya, RM and Rajeswari, M and Zhang, H (1994) Epitaxial $LaNiO_3$ thin films: A normal metal barrier for SNS junction. In: Journal of Materials Research, 9 (4). pp. 898-902.

Hegde, MS and Satyalakshmi, KM and Mallya, RM and Rajeswari, M and Zhang, H (1994) Epitaxial LaNiO3 thin films: A normal metal barrier for SNS junction. In: Journal of Materials Research, 9 (4). pp. 898-902.

Hegde, MS and Satyalakshmi, KM and Ramesh, S and Vasanthacharya, NY and Gopalakrishnan, J (1992) New defect-perovskite oxides related to the yttrium-barium-copper oxide superconductor. In: Materials Research Bulletin, 27 (9). pp. 1099-1106.

Hemambar, C and Rao, Srinivasa B and Jayaram, V (2001) Al-SiC electronic packages with controlled thermal expansion coefficient by a new method of pressureless infiltration. In: Materials and Manufacturing Processes, 16 (6). pp. 779-788.

Hines, JA and Ikuhara, Y and Chokshi, AH and Sakuma, T (1998) The influence of trace impurities on the mechanical characteristics of a superplastic 2 mol% yttria stabilized zirconia. In: Acta Materialia, 46 (15). pp. 5557-5568.

Hirota, K and Saito, F and Jacob, KT and Waseda, Y and Okabe, TH (1999) Electrochemical deoxidation of RE–O (RE=Gd, Tb, Dy, Er) solid solutions. In: Journal of Alloys and Compounds, 282 (1-2). pp. 101-108.

Hoque, Manjura S and Srivastava, C and Kumar, V and Venkatesh, N and Das, HN and Saha, DK and Chattopadhyay, K (2013) Exchange-spring mechanism of soft and hard ferrite nanocomposites. In: Materials Research Bulletin, 48 (8). pp. 2871-2877.

Hoque, Manjura S and Srivastava, C and Srivastava, N and Venkateshan, N and Chattopadhyay, K (2013) Synthesis and characterization of Fe- and Co-based ferrite nanoparticles and study of the T-1 and T-2 relaxivity of chitosan-coated particles. In: JOURNAL OF MATERIALS SCIENCE, 48 (2). pp. 812-818.

Hoque, Manjura S and Srivastava, C and Venkatesha, N and Anil Kumar, PS and Chattopadhyay, K (2013) Superparamagnetic behaviour and T-1, T-2 relaxivity of ZnFe2O4 nanoparticles for magnetic resonance imaging. In: Philosophical Magazine, 93 (14). pp. 1771-1783.

Hoque, Manjura S and Srivastava, C and Venkatesha, N and Chattopadhyay, K (2013) Synthesis, Characterization, and Nuclear Magnetic Resonance Study of Chitosan-Coated Mn1-xZnxFe2O4 Nanocrystals. In: IEEE TRANSACTIONS ON NANOBIOSCIENCE, 12 (4). pp. 298-303.

Hoque, S Manjura and Kader, SS and Paul, DP and Saha, DK and Das, HN and Rana, MS and Chattopadhyay, K and Hakim, MA (2012) Effect of Grain Size on Structural and Magnetic Properties of CuFe2O4 Nanograins Synthesized by Chemical Co-Precipitation. In: IEEE TRANSACTIONS ON MAGNETICS, 48 (5, Par). pp. 1839-1843.

Hou, JG and Qu, YF and Vaish, R and Varma, KBR and Krsmanovic, D and Kumar, RV (2010) Crystallographic Evolution, Dielectric, and Piezoelectric Properties of Bi4Ti3O12:W/Cr Ceramics. In: Journal of the American Ceramic Society, 93 (5). pp. 1414-1421.

Huang, Z and Kumar, P and Dutta, I and Sidhu, R and Renavikar, M and Mahajan, R (2014) Incorporation of Interfacial Intermetallic Morphology in Fracture Mechanism Map for Sn-Ag-Cu Solder Joints. In: JOURNAL OF ELECTRONIC MATERIALS, 43 (1). pp. 88-95.

I

Ilangovan, S and Vasu, KI (1986) Electro-hydrometallurgy of chalcopyrites - VII. An appraisal of ferric chloride leaching process. In: Bulletin of Electrochemistry, 2 (6). pp. 611-613.

Iwasaki, I and Pozzo, RL and Natarajan, KA and Adam, K and Orlich, JN (1988) Nature of corrosive and abrasive wear in ball mill grinding. In: International Journal of Mineral Processing, 22 (1-4). pp. 345-360.

Iwase, M and Ichise, E and Jacob, KT (1984) Mixed ionic and electronic conduction in zirconia and its applications in metallurgy. In: Proc. Zirconia 83, Advances in Ceramics Series, 1984, pp. 646-659.

Iwase, M and Ichise, E and Jacob, KT (1986) Physical chemistry of mixed conducting zirconia ceramics. In: Sprechsaal, 119 (4). 280 -283.

Iwase, M and Jacob, KT (1982) Some recent developments in solid state galvanic sensors. In: Proceedings of the Symposium on High Temperature Materials Chemistry, 1982, Pennington, N.J., U.S.A.

Iyengar, GNK and Balasubramanya, R and Jacob, KT (1997) A phenomenological treatment of cation distribution in spinels: System (Ni(1-x)Alx)(t)[NixAl2-x](0) O-4. In: High Temperature Materials And Processes, 16 (1). pp. 39-48.

Iyengar, GNK and Abraham, KP and Raghavan, S (1985) Determination of the thermodynamic properties of xMgO + (1 x)MnO (s, sln) from a solid-electrolyte galvanic cell in the temperature range 1163 to 1318 K. In: The Journal of Chemical Thermodynamics, 17 (6). pp. 585-591.

Iyer, Anantha GV and Vasudev, VN (1985) Copper metallogeny in the Jogimardi volcanics, Chitradurga greenstone belt. In: Journal of the Geological Society of India, 26 (8). pp. 580-598.

J

Jacob, KT (1986) Solubility and activity of oxygen in liquid nickel in equilibrium with $\alpha -Al_2o_3$Nio.(1 + x)$Al_2o_3$. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 17B (4). pp. 763-70.

Jacob, KT and Behera, CK (2000) Equilibria involving the reciprocal spinel solid solution (MgxFe1-x)(AlyCr1-Y)(2)O-4: Modeling and experiment. In: Metallurgical and Materials Transactions B, 31 (06). pp. 1247-1259.

Jacob, KT and Hajra, JP (1986) Electromagnetic levitation study of sulfur in liquid iron, nickel, and iron-nickel alloys. In: Transactions of the Indian Institute of Metals, 39 (1). pp. 62-69.

Jacob, KT and Hajra, JP (1987) Measurement of Gibbs energies of formation of $CoF_2$, and $MnF_2$, using a new composite dispersed solid electrolyte. In: Bulletin of Materials Science, 9 (1). pp. 37-46.

Jacob, KT and Hajra, JP and Iwase, M (1984) Activities Of Mn In Solid And Liquid Fe-Mn Alloys. In: Archiv Fur Das Eisenhuttenwesen, 55 (9). pp. 421-426.

Jacob, KT and Hoque, SM and Waseda, Y (2000) Solute-solute and solute-solvent interactions in transition metal alloys : Pt-Ti system. In: Materials science and technology, 16 (4). pp. 364-371.

Jacob, KT and Hoque, SM and Waseda, Y (1998) Strong solute-solvent interactions in the systems Mg-Pd and Al-Pd: manifestation of charge transfer and s-p-d hybridization. In: Zeitschrift fur Metallkunde, 89 (7). pp. 487-493.

Jacob, KT and Iwase, M (1983) Effect of pressure on the emf of solid-state cells. In: High Temperature Science, 16 (2). pp. 123-129.

Jacob, KT and Iyengar, GNK and Kim, WK (1986) Spinel-Corundum Phase Equilibria in the Systems Mn-Cr-Al-O and Co-Cr-Al-O at 1373 K. In: Journal of the American Ceramic Society, 69 (6). pp. 487-492.

Jacob, KT and Lwin, KT and Waseda, Y (2001) System Pr-Pd-O: Phase diagram and thermodynamic properties of ternary oxides using solid-state cells with special features. In: Zeitschrift Fur Metallkunde, 92 (7). pp. 731-739.

Jacob, KT and Okabe, TH and Uda, T and Waseda, Y (1999) Determination of thermodynamic properties of $Ca_{4}PtO_{6}$ and $CaPtO_{3}$ using solid state cells with buffer electrodes. In: Zeitschrift Fur Metallkunde, 90 (7). pp. 491-498.

Jacob, KT and Priya, S and Waseda, Y (2000) Measurement of the Activity of Boron in Liquid Copper using a Four-Phase Equilibrium Technique. In: Metallurgical and Materials Transactions A, 31 (10). pp. 2674-2678.

Jacob, KT and Priya, S and Waseda, Y (1998) Thermodynamic Mixing Properties and Solid-State Immiscibility in the Systems Pd-Rh and Pd-Rh-O. In: Journal of Phase Equilibria, 19 (4). pp. 340-350.

Jacob, KT and Saji, VS (2006) Interaction between $Ni/NiO$ and $PbTiO_3$: Phase Reversal with Redox Switching. In: Journal of Phase Equilibria & Diffusion, 27 (5). pp. 456-461.

Jacob, KT and Saji, VS and Waseda, Y (2006) Activity of $TiO_2$ in the system $ZrO_2-TiO_2$ and Gibbs energy of formation of $ZrTiO_4$. In: High Temperature Materials and Processes, 25 (4). pp. 203-208.

Jacob, KT and Saji, VS and Waseda, Y (2007) Standard Gibbs energy of formation of $Pb_2Ru_2O_{6.5}$. In: Journal of Materials Research, 22 (5). pp. 1174-1181.

Jacob, KT and Shukla, AK and Akila, Ramachandran and Kale, GM (1986) Gibbs' energy of formation of nickel orthosilicate $(Ni_2SiO_4)$. In: High Temperature Materials and Processes, 7 (2-3). pp. 141-148.

Jacob, Thomas K and Seetharaman, Seshadri (1996) Phase Equilibria, Oxygen Potentials, and Activities in the System Ni-Co-Si-O at 1373 K. In: Journal of the American Ceramic Society, 79 (11). pp. 2815-2820.

Jacob, Thomas K and Hoque, Manjura S and Waseda, Yoshio (2000) Synergistic Use of Thermogravimetric and Electrochemical Techniques for Thermodynamic Study of $TiO_x$ (1.67≤ x≤ 2.0) at 1573 K. In: Materials Transactions, JIM, 41 (6). pp. 681-689.

Jacob, Thomas K and Pandit, Shashidhara S (1988) Characterization of Alloy-Spinel-Corundum Equilibrium in the System Fe-Ni-Al-O. In: Transactions of the Iron and Steel Institute of Japan, 28 (2). pp. 91-96.

Jacob, Thomas K and Pandit, Shashidhara S (1987) Spinel deoxidation equilibrium in the cobalt-manganese-aluminum-oxygen system: Experiment and modeling. In: International Journal for Materials Research/Zeitschrift für Metallkunde, 78 (9). pp. 652-656.

Jacob, Thomas K and Waseda, Yoshio (1998) Solid-State Immiscibility and Thermodynamics of the Calcium Oxide-Strontium Oxide System. In: Journal of the American Ceramic Society, 81 (4). pp. 1065-1068.

Jacob, K Thomas and Shekhar, Chander and Waseda, Yoshio (2008) Thermodynamic Properties and Phase Diagram for the System MoO2–TiO2. In: Journal of the American Ceramic Society, 91 (2). pp. 563-568.

Jacob, KT (1982) Activity of manganese in liquid Ni Mn alloys. In: Metallurgical and Materials Transactions B, 13 (2). pp. 283-285.

Jacob, KT (1985) Application of solid state cells to alloy thermodynamics - critical factors and emerging frontiers. In: Thermodynamics and Kinetics of Metallurgical Processes, 1985, Calcutta.

Jacob, KT (1986) Casting of titanium and titanium alloys. In: Defence Science Journal, 36 (2). pp. 121-141.

Jacob, KT (1979) Correlations between structure and thermodynamic properties of spinels and their applications in technology. In: Transactions of the Indian Institute of Metals, 32 . pp. 470-484.

Jacob, KT (1995) Determination of the Gibbs energy of diamond using a solid state cell. In: Solid State Communications, 94 (9). pp. 763-765.

Jacob, KT (1997) Discussion of "use of solid electrolyte galvanic cells to determine the activity of CaO in the $CaO-ZrO_2$ system and standard Gibbs free energies of formation of $CaZrO_3$ from CaO and $ZrO_2$". In: Metallurgical And Materials Transactions B, 28 (4). pp. 723-725.

Jacob, KT (1978) Electrochemical determination of activities in Cr2O3 Al2O3 solid solutions. In: Journal of the Electrochemical Society, 125 . pp. 175-179.

Jacob, KT (1976) Gibbs free energies of formation of ZnAl2O4 and ZnCr2O4. In: Thermochimica Acta, 15 (1). pp. 79-87.

Jacob, KT (1978) Gibbs free energies of formation of indium (III) oxide and sulphate. In: Transactions of the Institution of Mining and Metallurgy, 87 . C165-C169.

Jacob, KT (1995) Gibbs free energy of Ca3Si2O7—a reassessment of electromotive force measurements. In: Metallurgical and Materials Transactions B, 26 (3). pp. 658-660.

Jacob, KT (1980) Isothermal section of the Ni Co S phase diagram at 1273 K. In: Metallurgical and Materials Transactions B, 11 (4). pp. 640-643.

Jacob, KT (1987) Kinetics of Sulphation of Nickel and Cobalt Ferrites with Na$O, Melt Containing F'e3+ Ions. In: Transactions of the Indian Institute of Metals, 40 (5). pp. 383-388.

Jacob, KT (1987) Kinetics of sulfation of nickel and cobalt ferrites with sodium sulfate melt containing iron(3+) ions. In: Transactions of Indian Institute of Metals, 40 (2). pp. 383-388.

Jacob, KT (1987) Mechanism of enhanced corrosion of alumina graphite refractories near slag/metal interface. In: Tool and Alloy Steels, 21 (12). pp. 477-480.

Jacob, KT (1980) Phase relationships in the system Cr W O and thermodynamic properties of CrWO4 and Cr2WO6. In: Journal of Materials Science, 15 (9). pp. 2167-2174.

Jacob, KT (1977) Phase relationships in the system Ni-W-O and thermodynamic properties of NiWO,. In: Journal of Meterials Science, 12 (8). pp. 1647-1652.

Jacob, KT (1977) Potentiometric determination of the Gibbs free energy of formation of cadmium and magnesium chromites. In: Journal of the electrochemical society, 124 (12). pp. 1827-1831.

Jacob, KT (1981) Revision of thermodynamic data on MnO Al2O3 melts. In: Canadian Metallurgical Quarterly, 20 (1). pp. 89-92.

Jacob, KT (1981) Solubility and activity of oxygen in liquid manganese. In: Journal of the Minerals Metals & Materials Society, 12 (4). pp. 675-678.

Jacob, KT (1986) Solubility and activity of oxygen in liquid nickel in equilibrium with -Al2O3 and NiO.(1+x)Al2O3. In: Metallurgical and Materials Transactions B, 17 (4). pp. 763-770.

Jacob, KT (1975) The electronic structure of the alloying element and the stability of the gamma phase in iron alloys. In: Journal of Materials Science, 10 (6). pp. 1090-1092.

Jacob, KT and Subramanian, R (2007) Thermodynamic assessment of phase relations in the system $PbO-RuO_2-TiO_2$. In: Journal of Materials Science, 42 (7). pp. 2521-2523.

Jacob, KT and Abraham, KP (2009) Thermodynamic properties of calcium titanates: CaTiO3, Ca4Ti3O10, and Ca3Ti2O7. In: The Journal of Chemical Thermodynamics, 41 (6). pp. 816-820.

Jacob, KT and Abraham, KP and Ramachandran, S (1990) Gibbs energies of formation of intermetallic phases in the systems Pt Mg, Pt Ca and Pt Ba and some applications. In: Metallurgical and Materials Transactions B, 21B (3). pp. 521-527.

Jacob, KT and Adharsh, R (2012) Thermodynamics of Congruent Oxidation. In: HIGH TEMPERATURE MATERIALS AND PROCESSES, 31 (4-5). pp. 395-403.

Jacob, KT and Adharsh, R (2011) A critique of the green house gas converter proposed by Azad. American Ceramics Society, 600 N CLEVELAND AVE, WESTERVILLE, OH 43082 USA, pp. 40-44.

Jacob, KT and Akila, R and Shukla, AK (1987) Oxygen Potentials for the Oxidation of Rare Earth Oxysulfides to Oxysulfates. In: Journal of Solid State Chemistry, 69 (1). pp. 109-115.

Jacob, KT and Alcock, CB (1977) Activities and their relation to cation distribution in NiAl2O4 MgAl2O4 spinel solid solutions. In: Journal of Solid State Chemistry, 20 (1). pp. 79-88.

Jacob, KT and Alcock, CB (1973) Activities of indium in solid solutions of Cu+In, Au+In and Cu+Au+In alloys. In: Acta Metallurgica, 21 (7). 1011-1016 .

Jacob, KT and Alcock, CB (1973) Discussion of "Measurement of vapor pressure of indium over Ag In using atomic absorption. In: Metallurgical and Materials Transactions B, 4 (10). pp. 2483-2484.

Jacob, KT and Alcock, CB (1975) Evidence of residual entropy in the cubic spinel Zn2TiO4. In: High Temperatures -High Pressures, 7 . pp. 433-439.

Jacob, KT and Alcock, CB (1972) Prediction of activities of oxygen in dilute quaternary solutions using binary data. In: Metallurgical and Materials Transactions B, 3 (7). pp. 1913-1918.

Jacob, KT and Alcock, CB (1972) Quasichemical equations for oxygen and sulphur in liquid binary alloys. In: Acta Metallurgica, 20 (2). pp. 221-232.

Jacob, KT and Alcock, CB (1976) Thermodynamics and phase equilibria in the system Cu2O CuO ()Ga2O3. In: Rev. Int. Hautes. Temper. Refract, 13 . pp. 37-42.

Jacob, KT and Alcock, CB (1975) Thermodynamics of CuAlO2 and CuAl2O4 and phase equilibria in the system Cu2O CuO-Al2O3. In: Journal of the American Ceramic Society, 58 (5-6). pp. 192-195.

Jacob, KT and Alcock, CB (1975) The oxygen potential of the systems Fe+FeCr2O4+ Cr2O3 and Fe+FeV2O4+ V2O3 in the temperature range 750 1600o C. In: Metallurgical and Materials Transactions B, 6B . pp. 215-221.

Jacob, KT and Alcock, CB and Fitzner, K (1977) Activities in the spinel solid solution, phase equilibria and thermodynamic properties of ternary phases in the system Cu Fe O. In: Metallurgical and Materials Transactions B, 8 (2). pp. 451-460.

Jacob, KT and Attaluri, Mrinalini (2003) Refinement of thermodynamic data for LaMnO3. In: Journal Of Materials Chemistry, 13 (4). pp. 934-942.

Jacob, KT and Attaluri, Mrinalini and Fitzner, K (2002) Phase diagram for the system Nd-Mn-O and thermodynamic properties of NdMnO3 and NdMn2O5. In: Calphad, 26 (3). pp. 313-325.

Jacob, KT and Behera, CK (2000) Spinel-corundum equilibria and activities in the system MgO-Al2O3-Cr2O3 at 1473 K. In: Metallurgical and Materials Transactions B, 31 (06). pp. 1323-1332.

Jacob, KT and Chan, JC (1974) Electrochemical Determination of the Stability of Mono- and Dicalcium Stannates. In: Journal of the Electrochemical Society, 121 (4). pp. 534-537.

Jacob, KT and Chan, JC and Alcock, CB (1974) Chemical potential of germanium in its solid solutions with Cu, Ag and Au. In: Acta Metallurgica, 22 (5). pp. 545-551.

Jacob, KT and Chandrasekharaiah, MS (1990) Measurement of the Gibbs Energy of Formation of URH3 Using an Solid Electrolyte. In: Zeitschrift für Metallkunde, 81 (7). pp. 509-512.

Jacob, KT and Dasgupta, N and Vineeth, PR (2010) Phase Relations in the System CaO-Fe2O3-Y2O3 at 1273 K and Compatibility Between Y1-xCaxFeO3-0.5x and Stabilized Zirconia. In: Journal of Phase Equilibria and Diffusion, 31 (6). pp. 518-522.

Jacob, KT and Dasgupta, N and Waseda, Y (1999) Thermodynamic properties of the calcium ferrites CaFe2O4 and Ca2Fe2O5. In: Zeitschrift für Metallkunde, 90 (7). pp. 486-490.

Jacob, KT and Dhiman, AK and Gupta, Preeti (2013) System Gd-Rh-O: Thermodynamics and phase relations. In: JOURNAL OF ALLOYS AND COMPOUNDS, 546 . pp. 185-191.

Jacob, KT and Fitzner, K (1977) Ion exchange equilibria between (Mn,Co)O solid solution and (Mn,Co)Cr2O4 and (Mn,Co)Al2O4 spinel solid solutions at 1100oC. In: Journal of Materials Science, 12 (3). pp. 481-488.

Jacob, KT and Fitzner, K (1977) The estimation of the thermodynamic properties of ternary alloys from binary data using the shortest distance composition path. In: Thermochimica Acta, 18 (2). pp. 197-206.

Jacob, KT and Gupta, Preeti (2013) Gibbs energy of formation of Ca7V4O17. In: Journal of Chemical Thermodynamics, 63 . pp. 7-10.

Jacob, KT and Gupta, Preeti (2014) Gibbs free energy of formation of rhodium sulfides. In: JOURNAL OF CHEMICAL THERMODYNAMICS, 70 . pp. 39-45.

Jacob, KT and Gupta, Preeti (2013) Refining sub-solidus phase relations in the systems CaO-RuO2-SiO2 and CaO-RuO2-V2O5. In: MATERIALS RESEARCH BULLETIN, 48 (9). pp. 3082-3087.

Jacob, KT and Gupta, Preeti and Han, Donglin and Uda, Tetsuya (2014) Phase equilibria in the system Sm-Rh-O and thermodynamic and thermal studies on SmRhO3. In: JOURNAL OF MATERIALS SCIENCE, 49 (8). pp. 3135-3145.

Jacob, KT and Gupta, Preeti and Han, Donglin and Uda, Tetsuya (2013) Thermodynamics of NdRhO3 and phase relations in the system Nd-Rh-O. In: CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 43 . pp. 71-79.

Jacob, KT and Gupta, Preeti and Vinay, M and Waseda, Y (2013) Phase chemistry of the system Nb-Rh-O. In: Journal of Solid State Chemistry, 202 . pp. 234-240.

Jacob, KT and Gupta, Sapna (2009) Calciothermic reduction of TiO2: A diagrammatic assessment of the thermodynamic limit of deoxidation. In: Journal of the Minerals Metals & Materials Society, 61 (5). pp. 56-59.

Jacob, KT and Gupta, Sapna (2009) Phase diagram of the system Ca-Ti-O at 1200 K. In: Bulletin of Materials Science, 32 (6). pp. 611-616.

Jacob, KT and Hajra, JP (1987) Measurement of Gibbs energies of formation of CoF2 and MnF2 using a new composite dispersed solid electrolyte. In: Bulletin of Materials Science, 9 (1). pp. 37-46.

Jacob, KT and Hajra, JP (1986) Oxygen content of liquid cobalt in equilibrium with CoO.(1+x)Al2O3 and -Al2O3. In: Zeitschrift für Metallkunde, 77 . pp. 673-677.

Jacob, KT and Hajra, JP (1985) Thermodynamic properties and phase boundaries of Co O solutions. In: Zeitschrift für Metallkunde, 76 (10). pp. 709-713.

Jacob, KT and Hajra, JP and Mathews, T (1993) Gibbs’ free energies of formation of Cu2Ln2O5 (Ln = Tb, Dy, Er, Yb) compounds. In: High-temperature materials and processes, 12 (4). pp. 251-258.

Jacob, KT and Hajra, JP and Mathews, T (1992) Potentiometric determination of the stability of BaCu2O2. In: Materials Science and Engineering: B, 15 (1). pp. 63-66.

Jacob, KT and Hoque, Manjura S and Waseda, Y (2000) Synergistic use of thermogravimetric and electrochemical techniques for thermodynamic study of TiOx (1.67 <= x <= 2.0) at 1573 K. In: Materials Transactions, JIM, 41 (6). pp. 681-689.

Jacob, KT and Iwase, M (1982) Three phase equilibria for activity determinations: system Co Mn. In: Zeitschrift fur Metallkunde, 73 (5). pp. 316-320.

Jacob, KT and Iwase, M and Waseda, Y (1987) A galvanic sensor for {SO_3 / SO_2} based on the {CaF_2 / CaSO_4} couple. In: Solid State Ionics, 23 (4). pp. 245-252.

Jacob, KT and Iyengar, GNK (1982) Oxidation of alkaline earth sulfides to sulfates: Thermodynamic aspects. In: Metallurgical and Materials Transactions B, 13 (3). pp. 387-390.

Jacob, KT and Iyengar, GNK (1986) Thermodynamic study of Fe2O3 Fe2(SO4)3 equilibrium using an oxyanionic electrolyte (Na2SO4 I). In: Metallurgical and Materials Transactions B, 17 (2). pp. 323-329.

Jacob, KT and Iyengar, GNK (1999) Thermodynamics and phase equilibria involving the spinel solid solution FexMg1-xCr2O4. In: Metallurgical and Materials Transactions B, 30 (5). pp. 865-871.

Jacob, KT and Iyengar, GNK and Srikanth, S (1986) Phase relations and activities in the Co Ni O system at 1373 K. In: Bulletin of Materials Science, 8 (1). pp. 71-79.

Jacob, KT and Jain, S and Saji, VS and Srikanth, PVK (2010) Thermal expansion of doped lanthanum gallates. In: Bulletin of Materials Science, 33 (4). pp. 407-411.

Jacob, KT and Jayadevan, K (2000) Tie-Lines and Mixing Properties of Solid Solutions in the System CaO-SrO-PbO-O at 1100 K. In: Journal of Phase Equilibria and Diffusion, 21 (04). pp. 350-356.

Jacob, KT and Jayadevan, KP (1997) Combined use of oxide and fluoride solid electrolytes for the measurement of Gibbs energy of formation of ternary oxides:System Bi-Ca-O. In: Materials Transactions, JIM, 38 (5). pp. 427-436.

Jacob, KT and Jayadevan, KP (1997) Measurement of Gibbs energy of formation of Ca2PbO4 using a solid-state cell with three electrodes. In: Journal of Materials Chemistry, 7 (12). pp. 2407-2413.

Jacob, KT and Jayadevan, KP (2004) Phase relations in the system Cu-Eu-O and thermodynamic properties of CuEu2O4 and CuEuO2. In: Journal of Phase Equilibria and Diffusion, 25 (2). pp. 125-133.

Jacob, KT and Jayadevan, KP (2002) Phase relations in the system Cu-La-O and thermodynamic properties of $CuLaO_2$ and $CuLa_2O_4$. In: Journal of Materials Science, 37 (8). pp. 1611-1620.

Jacob, KT and Jayadevan, KP (2002) Phase relations in the system Cu-La-O and thermodynamic properties of CuLaO2 and CuLa2O4. In: Journal of Materials Science, 37 (8). pp. 1611-1620.

Jacob, KT and Jayadevan, KP (1998) Phase relations, chemical potentials and thermodynamic properties of interoxide compounds in the system Ba-Pb-O. In: Materials Science and Engineering B, 52 (2-3). pp. 134-144.

Jacob, KT and Jayadevan, KP (1998) System Bi–Sr–O: Synergistic measurements of thermodynamic properties using oxide and fluoride solid electrolytes. In: Journal of Materials Research, 13 (7). pp. 1905-1918.

Jacob, KT and Jayadevan, KP (2000) System Sr-Pb-O: Phase Equilibria and Thermodynamics Using Solid-State Cells with Buffer Electrodes. In: Chemistry of Materials, 12 (6). 1779 -1786.

Jacob, KT and Jeffes, JHE (1971) Activities of oxygen and lead in Pb-Ag O solutions. In: The Journal of Chemical Thermodynamics, 3 (4). pp. 433-443.

Jacob, KT and Jeffes, JHE (1971) Deoxidation of liquid copper: effect of phosphorus on oxygen activity. In: Transactions of the Institution of Mining and Metallurgy, 80 . C181-189.

Jacob, KT and Jeffes, JHE (1971) Thermodynamic study of oxygen in liquid lead tin alloys. In: Transactions of the Institution of Mining and Metallurgy, 80 . C79-86.

Jacob, KT and Jeffes, JHE (1972) An improved method for calculating activities from distribution equilibria. In: High Temperatures -High Pressures, 4 . pp. 177-182.

Jacob, KT and Jeffes, JHF (1971) Thermodynamics of oxygen in liquid copper, lead and copper lead alloys. In: Transactions of the Institution of Mining and Metallurgy, 80 . C32-41.

Jacob, KT and Kale, GM and Abraham, KP (1992) Electrochemical Determination of Gibbs Energies of Formation of Calcium Chromite and Chromate. In: Journal of the Electrochemical Society, 139 (2). pp. 517-520.

Jacob, KT and Kale, GM and Iyengar, GNK (1989) Chemical potentials of oxygen for fayalite-quartz-lron and fayalite-quartz-magnetite equilibria. In: Metallurgical and Materials Transactions B, 20 (5). pp. 679-685.

Jacob, KT and Kale, GM and Iyengar, GNK (1986) Oxygen potentials, Gibbs' energies and phase relations in the Cu-Cr-o system. In: Journal of Materials Science, 21 (8). pp. 2753-2758.

Jacob, KT and Kale, GM and Iyengar, GNK (1987) Phase equilibria and thermodynamic properties in the system $Ni-Mo-O$. In: Journal of Materials Science, 22 (12). pp. 4274-4280.

Jacob, KT and Kale, GM and Shekhar, Chander (2009) Phase Equilibria in the System Al2O3-CaO-CoO and Gibbs Energy of Formation of Ca3CoAl4O10. In: Journal of Phase Equilibria and Diffusion, 30 (1). pp. 2-11.

Jacob, KT and Kale, GM and Waseda, Y (1992) Gibbs energy of formation of $CuCrO_4$ and phase relations in the system Cu-Cr-O below 735 K. In: Thermochimica Acta, 208 . pp. 341-348.

Jacob, KT and Kale, GM and Waseda, Y (1992) Gibbs energy of formation of CuCrO4 and phase relations in the system Cu-Cr-O below 735 K. In: Thermochimica Acta, 208 (28). pp. 341-348.

Jacob, KT and Kumar, A and Rajitha, G and Waseda, Y (2011) Thermodynamic Data for Mn3O4, Mn2O3 and MnO2. In: High Temperature Materials and Processes, 30 (4-5). pp. 459-472.

Jacob, KT and Kumar, A and Waseda, Y (2008) Gibbs Energy of Formation of MnO: Measurement and Assessment. In: Journal of Phase Equilibria and Diffusion, 29 (3). pp. 222-230.

Jacob, KT and Kumar, BV (1987) Alloy/Oxide Equilibria in Iron--Vanadium--Oxygen and Iron--Niobium--Oxygen Systems. In: Steel Research, 58 (2). pp. 71-76.

Jacob, KT and Kumar, BV (1986) Thermodynamic properties of Cr Mo solid alloys. In: Zeitschrift für Metallkunde, 77 . pp. 207-212.

Jacob, KT and Lwin, Kay Thi and Waseda, Y (2002) Systematic trends in structural and thermodynamic properties of ternary oxides in the systems Ln-Pd-O (Ln = lanthanide element). In: Calphad, 26 (3). pp. 385-401.

Jacob, KT and Mallya, RM and Waseda, Y and Jayadevan, KP (2000) Nanocrystalline MgAl2O4: Measurement of Thermodynamic Properties Using a Solid State Cell. In: Advanced Materials, 12 (6). pp. 440-444.

Jacob, KT and Mathew, PM (1979) Solubility and activity of oxygen in liquid antimony. In: Zeitschrift fur Metallkunde, 70 (6). pp. 366-371.

Jacob, KT and Mathews, T (1989) Applications of solid electrolytes in galvanic sensors. In: High conductivity solid ionic conductors: recent trends and applications, 1989, Singapore.

Jacob, KT and Mathews, T (1991) Phase relations in the system BiO1.5–SrO–CuO at 1123 K. In: Journal of Materials Chemistry, 1 (4). pp. 545-549.

Jacob, KT and Mathews, T (1990) Solid State Electrochemical Sensors in Process Control. In: Indian Journal of Technology, 28 (6-8). pp. 413-427.

Jacob, KT and Mathews, Tom and Hajra, JP (1993) Gibbs' free energies of formation of $Cu_2Ln_2O_5$ (Ln = Tb, Dy, Er, Yb) compounds. In: High Temperature Materials and Processes, 12 (4). pp. 251-258.

Jacob, KT and Mathews, Tom and Hajra, JP (1993) Phase Relations in the System Cu-Gd-O and Gibbs Energy of Formation of CuGd204. In: Metallurgical Transactions. Physical Metallurgy and Material, 24 (7). pp. 1655-1660.

Jacob, KT and Mathews, Tom and Hajra, JP (1992) Potentiometric determination of the stability of $BaCu_2O_2$. In: Materials Science and Engineering B, 15 (1). pp. 63-66.

Jacob, KT and Matthews, T and Hajra, JP (1990) Low oxygen potential boundary for the stability of $YBA_2Cu_3O_{7−\delta}$. In: Materials Science and Engineering B, 7 (1-2). pp. 25-29.

Jacob, KT and Matthews, Tom and Hajra, JP (1990) Low oxygen potential boundary for the stability of YBA2Cu3O7−δ. In: Materials Science and Engineering: B, 7 (1-2). pp. 25-29.

Jacob, KT and Mukhopadhyay, Sukanya and Shukla, AK (1993) Gradient solid-electrolyte for use with dissimilar gas electrodes. In: Solid State Ionics, 62 (1-2). pp. 27-37.

Jacob, KT and Mukhopadhyay, Sukanya and Shukla, AK (1992) Tie lines and activities in the system CoO MgO SiO2 at 1373 K. In: Journal of the American Ceramic Society, 75 (11). pp. 3081-3086.

Jacob, KT and Mukhopadhyay, Sukauya (1994) Application of composition gradient solid electrolytes in sensors and thermodynamic measurements. In: Proc. Second International Symposium on Ionic and Mixed Conducting Ceramics, 1994, Pennington, U.S.A.

Jacob, KT and Nelson, Howard G and Rao, Bhogeswara D (1979) Phase relations in the Fe Ni Cr S system and the sulfidation of an austenitic stainless steel. In: Oxidation of Metals, 13 (1). pp. 25-55.

Jacob, KT and Okabe, TH and Waseda, Y and Uda, T (2000) Solute-solute and solute-solvent interactions in transition metal alloys: Pt-Ti system. In: Journal of chemical thermodynamics, 32 (10). 1399 -1408.

Jacob, KT and Okabe, TH and Waseda, Y and Uda, T (1999) An advanced design of the solid-state cell for accurate thermodynamic measurements on ternary oxides: system Sm–Pd–O. In: Materials Science and Engineering: B, 64 (1). pp. 44-53.

Jacob, KT and Pandit, SS (1985) Gibbs Energy of Formation of Cobalt Divanadium Tetroxide. In: Journal of Solid State Chemistry, 60 (2). pp. 237-243.

Jacob, KT and Pandit, SS (1990) A critique of the Gschneidner correlation between stability and normalized unit cell volume of lanthanide intermetallics. In: Journal of Phase Equilibria, 11 (6). pp. 523-525.

Jacob, KT and Patil, Rashmi (1998) Activities in the spinel solid solution FeXMg1−XAl2O4. In: Metallurgical and Materials Transactions A, 29 (6). pp. 1241-1248.

Jacob, KT and Petric, A and Kale, GM and Iyengar, GNK (1987) Phase relations between Al2O3---Cr2O3 and FeAl2O4---FeCr2O4 solid solutions at 1823 K. In: Ceramics International, 13 (2). pp. 123-129.

Jacob, KT and Prabhudev, Sagar and Mallya, RM (2010) Resolution of conflicting views on thermodynamics of glass transition: A unified model. In: Bulletin of Materials Science, 33 (5). pp. 603-609.

Jacob, KT and Priya, S and Waseda, Y (1998) Thermodynamic properties and phase equilibria for Pt-Rh alloys. In: Metallurgical and Materials Transactions A, 29 (6). pp. 1545-1550.

Jacob, KT and Priya, S and Waseda, Y (2000) A thermodynamic study of liquid Cu-Cr alloys and metastable liquid immiscibility. In: Zeitschrift für Metallkunde, 91 (7). pp. 594-600.

Jacob, KT and Priya, Shashank and Waseda, Yoshio (1998) Alloy-oxide equilibria in the system Pt-Rh-O. In: Bulletin of Materials Science, 21 (1). pp. 99-103.

Jacob, KT and Prusty, Debadutta (2010) Thermodynamic properties of RhO2. In: Journal of Alloys and Compounds, 507 (1). L17-L20.

Jacob, KT and Prusty, Debadutta and Kale, GM (2012) Phase relations and Gibbs energies of spinel phases and solid solutions in the system Mg-Rh-O. In: Journal of Alloys and Compounds, 513 . pp. 365-372.

Jacob, KT and Raj, Markondeya P and Waseda, Y (1995) The CaO-SrO-CuO-O-2 system: Phase equilibria and thermodynamic properties at 1123 K. In: Journal of Phase Equilibria, 16 (2). pp. 113-120.

Jacob, KT and Raj, Shubhra and Rannesh, L (2007) Vegard's law: a fundamental relation or an approximation? In: International Journal of Materials Research, 2007 (9). pp. 776-779.

Jacob, KT and Raj, Shubhra and Reddy, SNS (2009) Activities in the $FeTiO_{3}-NiTiO_{3}$ Solid Solution from Alloy-Oxide Equilibria at 1273 K. In: Journal of Phase Equilibria and Diffusion, 30 (2). pp. 127-135.

Jacob, KT and Rajitha, G (2009) Discussion of enthalpy, entropy and free energy of formation of GaN. In: Journal Of Crystal Growth, 311 (14). pp. 3806-3810.

Jacob, KT and Rajitha, G (2012) Gibbs Energy of Formation of Ca3Ti8Al12O37 and Phase Relations and Chemical Potentials in the System Al2O3-TiO2-CaO. In: JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 33 (4). pp. 293-302.

Jacob, KT and Rajitha, G (2012) Nonstoichiometry, defects and thermodynamic properties of YFeO3, YFe2O4 and Y3Fe5O12. In: SOLID STATE IONICS, 224 . pp. 32-40.

Jacob, KT and Rajitha, G (2010) Role of entropy in the stability of cobalt titanates. In: Journal of Chemical Thermodynamics, 42 (7). pp. 879-885.

Jacob, KT and Rajitha, G (2011) Thermodynamic properties of strontium titanates Sr2TiO4, Sr3Ti2O7, Sr4Ti3O10, and SrTiO3. In: Journal of Chemical Thermodynamics, The, 43 (1). pp. 51-57.

Jacob, KT and Rajitha, G and Dasgupta, N (2012) Electrical conductivity of Ca-doped YFeO3. In: INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 19 (1). pp. 47-53.

Jacob, KT and Rajitha, G and Kale, GM (2009) Thermodynamic properties of Pb2PtO4 and PbPt2O4 and phase equilibria in the system Pb–Pt–O. In: Journal Of Alloys And Compounds, 481 (1-2). pp. 228-232.

Jacob, KT and Rajitha, G and Kale, GM and Watson, A and Wang, Z (2009) High-temperature heat capacity and heat content of CaCu3Ti4O12 (CCTO). In: Journal of Alloys and Compounds, 488 (1). pp. 35-38.

Jacob, KT and Rajitha, G and Rannesh, L and Fukuyama, H and Waseda, Y (2012) Thermodynamics of Al(1-x)Ga(x)N solid solution: Inclination for phase separation and ordering. In: Acta Materialia, 60 (1). pp. 59-66.

Jacob, KT and Rajitha, G and Saji, VS (2009) Compatibility of RuO2 electrodes with PZT ceramics. In: Bulletin of Materials Science, 32 (3). pp. 313-319.

Jacob, KT and Rajithaa, G and Reddy, SNS (2010) Reactive interdiffusion: deviation from local equilibrium in the Fe-NiTiO3 couple. In: Scripta Materialia, 63 (2). pp. 204-206.

Jacob, KT and Ranjani, R (2011) Thermodynamic properties of LaFeO3-delta and LaFe12O19. In: Materials Science and Engineering B, 176 (7). pp. 559-566.

Jacob, KT and Rannesh, L (2007) Thermodynamic activities in the Pb(Zr1−XTiX)O3 solid solution at 1373K. In: Materials Science and Engineering: B, 140 (1-2). pp. 53-58.

Jacob, KT and Rannesh, L. (2007) Thermodynamic activities in the Pb(Zr1-XTiX)O-3 solid solution at 1373 K. In: Materials Science and Engineering B, 140 (1-2). pp. 53-58.

Jacob, KT and Rao, Bhogeswara D (1979) A solid-state probe for SO2/SO3 based on Na2SO4 I electrolyte. In: Journal of the Electrochemical Society, 126 . pp. 1842-1847.

Jacob, KT and Rao, DB and Nelson, HG (1978) Some studies on a solid state sulphur probe for coal gasification system. In: Journal of the Electrochemical Society, 125 (5). pp. 758-762.

Jacob, KT and Richardson, FD and Seshadri, SK (1970) Thermodynamics of oxygen in liquid copper-tin alloys. In: Transactions of the Institution of Mining and Metallurgy, 79 . pp. 274-280.

Jacob, KT and Saji, VS and Reddy, SNS (2007) Thermodynamic evidence for order-disorder transition in $NiTiO_3$. In: Journal of Chemical Thermodynamics, 39 (2). pp. 230-235.

Jacob, KT and Saji, VS and Waseda, Y (2006) Activity of TiO2 in the System ZrO2-TiO2 and Gibbs Energy of Formation of ZrTiO4. In: High Temperature Materials and Processes, 25 (4). pp. 203-208.

Jacob, KT and Saji, VS and Waseda, Y (2007) Standard Gibbs energy of formation of Pb2Ru2O6.5. In: Journal of Materials Research, 22 (5).

Jacob, KT and Seetharaman, S (1995) Discussion of thermodynamic stability of metallurgical coke relative to graphite. In: Metallurgical and Materials Transactions B, 26B (3). pp. 655-656.

Jacob, KT and Seetharaman, S (1994) Thermodynamic stability of metallurgical coke relative to graphite. In: Metallurgical and Materials Transactions A, 25 (1). 149-154 .

Jacob, KT and Sharma, Juhi and Gupta, Preeti (2012) System Ho-Rh-O: Phase Equilibria, Chemical Potentials and Gibbs Energy of Formation of HoRhO3. In: JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 33 (6). pp. 429-436.

Jacob, KT and Sheela, Ramasesha K (1989) Design of temperature-compensated reference electrodes for non-isothermal galvanic sensors. In: Solid State Ionics, 34 (3). pp. 161-166.

Jacob, KT and Shekhar, C and Waseda, Y (2009) An update on the thermodynamics of Ta2O5. In: Journal of Chemical Thermodynamics, 41 (6). pp. 748-753.

Jacob, KT and Shekhar, Chander and Kale, GM (2009) Phase Equilibria in the System $Al_{2}O_{3}-CaO-CoO$ and Gibbs Energy of Formation of $Ca_{3}CoAl_{4}O_{10}$. In: Journal of Phase Equilibria and Diffusion, 30 (1). pp. 2-11.

Jacob, KT and Shekhar, Chander and Vinay, M and Waseda, Yoshio (2010) Thermodynamic Properties of Niobium Oxides. In: Journal of Chemical & Engineering Data, 55 (11). pp. 4854-4863.

Jacob, KT and Shekhar, Chander and Waseda, Y (2009) Phase relations in the system (chromium + rhodium + oxygen) and thermodynamic properties of CrRhO3. In: Journal of Chemical Thermodynamics, 41 (01). pp. 56-61.

Jacob, KT and Shekhar, Chander and Waseda, Y (2009) Phase relations in the system Ta-Rh-O and thermodynamic properties of TaRhO4. In: Materials Chemistry and Physics, 116 (1). pp. 289-293.

Jacob, KT and Shim, WW (1981) Gibbs energy of formation of lead zirconate. In: Journal of the American Ceramic Society, 64 (10). pp. 573-578.

Jacob, KT and Shukla, AK (1987) Kinetic decomposition of Ni2SiO4 in oxygen potential gradients. In: Journal of Materials Research, 2 (3). pp. 338-344.

Jacob, KT and Shukla, AK (1987) Kinetic decomposition of {Ni_2SiO_4} in oxygen potential gradients. In: Journal of Materials Research, 2 (3). pp. 338-344.

Jacob, KT and Shukla, AK and Ramachandran, A and Kale, GM (1986) Gibbs energy of formation of nickel orthosilicate (Ni2SiO4). In: High Temperature Materials and Processes, 7 (2-3). pp. 141-148.

Jacob, KT and Sreedharan, OM and Azad, AM (1991) Standard Gibbs' energies of formation of BaCuO2, Y2Cu2O5 and Y2BaCuO5. In: Journal of Materials Science , 26 (12). pp. 3374-3379.

Jacob, KT and Srikanth, S (1987) Gibbs energy of formation of $Au_2Na$. In: Scripta Metallurgica, 21 (12). pp. 1649-1654.

Jacob, KT and Srikanth, S (1987) Gibbs energy of formation of Au2Na. In: Scripta metallurgica, 21 (12). pp. 1649-1654.

Jacob, KT and Srikanth, S (1990) Physical chemistry of the reduction of calcium oxide with aluminium in vacuum. In: High Temperature Materials and Processes, 9 (2-4). pp. 77-92.

Jacob, KT and Srikanth, S and Waseda, Y (1988) Activities, concentration fluctuations and complexing in liquid Ca-Al alloys. In: Transactions of the Japan institute of metals, 29 (1). pp. 50-59.

Jacob, KT and Srikanth, S and Waseda, Y (1988) Vapour composition and activities in Mg-Zn liquid alloy at 923 K. In: Thermochimica Acta, 130 . pp. 193-203.

Jacob, KT and Srikanth , S (1988) Use of metastable equilibria for determination of Gibbs energy of solids. In: Journal of Materials Research, 3 (4). 687 -693.

Jacob, KT and Sriram, MV (1994) Phase relations and gibbs energies in the system Mn-Rh-O. In: Metallurgical and Materials Transactions A, 25 (7). pp. 1347-1357.

Jacob, KT and Subramanian, R (2008) Phase Diagram for the System RuO2-TiO2 in Air. In: Journal of Phase Equilibria and Diffusion, 29 (2). pp. 136-140.

Jacob, KT and Subramanian, R (2007) Thermodynamic assessment of phase relations in the system PbO-RuO2-TiO2. In: Journal of Materials Science, 42 (7). pp. 2521-2523.

Jacob, KT and Swaminathan, K and Sreedharan, OM (1991) Potentiometric determination of activities in the two-phase fields of the system Na2O---(α)Al2O3. In: Electrochimica Acta, 36 (5-6). pp. 791-798.

Jacob, KT and Swaminathan, K and Sreedharan, OM (1989) Stability constraints in the design of galvanic cells using composite electrolytes and auxiliary electrodes. In: Solid State Ionics, 34 (3). pp. 167-173.

Jacob, KT and Toguri, JM (1979) Authors reply to the discussion of Thermodynamics of oxide sulfate melts: The system PbO PbSO4. In: Metallurgical and Materials Transactions B, 10 (2). pp. 297-298.

Jacob, KT and Toguri, JM (1978) Thermodynamics of oxide sulfate melts: The system PbO PbSO4. In: Metallurgical and Materials Transactions B, 9 (3). pp. 301-306.

Jacob, KT and Uda, T and Okabe, TH and Waseda, Y (2000) The standard enthalpy and entropy of formation of Rh2O3 - A third-law optimization. In: High Temperature Materials and Processes, 19 (1). pp. 11-16.

Jacob, KT and Uda, T and Waseda, Y and Okabe, TH (1999) Phase relations in the system Sr–Ir–O and thermodynamic measurements on SrIrO3, Sr2IrO4 and Sr4IrO6 using solid-state cells with buffer electrodes. In: Journal of Alloys and Compounds, 288 (1-2). pp. 188-196.

Jacob, KT and Uda, T and Waseda, Y and Okabe, TH (1999) System Cu-Rh-O: Phase diagram and thermodynamic properties of ternary oxides CuRhO2 and CuRh204. In: Bulletin of Materials Science, 22 (4). pp. 741-749.

Jacob, KT and Valderrama, JN (1977) Gibbs free energy of formation of magnesium stannate. In: Journal of Solid State Chemistry, 22 (3). 291-295 .

Jacob, KT and Varamban, S Vana (1998) Phase equilibria and thermodynamic properties of ternary oxides in the system Co-Mo-O. In: Journal of Alloys and Compounds, 280 (1-2). pp. 138-146.

Jacob, KT and Varghese, Viji (1995) Solid-state miscibility gap and thermodynamics of the system BaO–SrO. In: Journal of Materials Chemistry, 5 (7). pp. 1059-1062.

Jacob, KT and Verman, R and Mallya, RM (2002) Nitride synthesis using ammonia and hydrazine - a thermodynamic panorama. In: Journal of Materials Science (full set), 37 (20). pp. 4465-4472.

Jacob, KT and Waseda, Y (1990) Gibbs energies of formation of rare earth $MPt_5$ compounds. In: Thermochimica Acta, 165 (2). pp. 223-233.

Jacob, KT and Waseda, Y (1990) Gibbs energies of formation of rare earth MPt5 compounds. In: Thermochimica Acta, 165 (2). 223-233 .

Jacob, KT and Waseda, Y (1994) Phase relations in the system SrO-Y2O3-CuO-O2 and CaO-Y2O3-CuO-O2 at 1173 K. In: Journal of Phase Equilibria, 15 (4). pp. 401-405.

Jacob, KT and Waseda, Y (1995) Potentiometric determination of the gibbs energies of formation of SrZrO3 and BaZrO3. In: Metallurgical and Materials Transactions B, 26 (4). pp. 775-781.

Jacob, KT and Waseda, Y (2000) Solid State Cells with Buffer Electrodes for Measurement of Chemical Potentials and Gibbs Energies of Formation: System Ca-Rh-O. In: Journal of Solid State Chemistry, 150 (1). pp. 213-220.

Jacob, KT and Waseda, Y (1990) Thermodynamic Properties of Platinum-rich Intermetallics in the Pt-Gd System. In: Materials Transactions, JIM, 31 (2). pp. 135-140.

Jacob, KT and Waseda, Y (1990) Thermodynamic properties of $Pt_5La, Pt_5Ce, Pt_5Pr, Pt_5Tb$ and $Pt_5Tm$ intermetallics. In: Bulletin of Materials Science, 13 (4). pp. 235-244.

Jacob, KT and Waseda, Y (1990) Thermodynamic properties of Pt5La, Pt5Ce, Pt5Pr, Pt5Tb and Pt5Tm intermetallics. In: Bulletin of Materials Science, 13 (4). pp. 235-244.

Jacob, KT and Waseda, Y (1990) The standard molar Gibbs energy of formation of $YbPt_3$ and $LuPt_3$ intermetallics. In: Journal of Chemical Thermodynamics, 22 (10). pp. 929-936.

Jacob, KT and Waseda, Y (1990) The standard molar Gibbs energy of formation of YbPt3 and LuPt3 intermetallics. In: The Journal of Chemical Thermodynamics, 22 (10). pp. 929-936.

Jacob, KT and Waseda, Y (1988) The vapour pressures of barium and strontium. In: Journal of the Less Common Metals, 139 (2). pp. 249-259.

Jacob, KT and Waseda, Y and Iwase, M (1986) Sensor for H2S or S2 based on alumina. In: Journal of the American Ceramic Society, 1 (3). pp. 264-270.

Jacob, KT and Waseda, Y and Iwase, M (1982) Sulphur potential measurements with a two phase sulphide oxide electrolyte. In: Journal of Applied Electrochemistry, 13 (1). pp. 55-67.

Jacob, KT and Waseda, Y and Iwase, M (1987) A galvanic sensor for SO3/SO2 based on CaF2/CaSO4 couple. In: Solid State Ionics, 23 (4). pp. 245-252.

Jacob, KT and Waseda, Y and Uda, T and Okabe, TH (2000) Solid-state cells with buffer electrodes for accurate thermodynamic measurements: system Nd-Ir-O. In: Electrochimica Acta, 45 (12). pp. 1963-1971.

Jacob, KT and Waseda, Y and Uda, T and Okabe, TH (1999) System Nd-Pd-O: Phase diagram and thermodynamic properties of oxides using a solid-state cell with advanced features. In: Journal of Phase Equilibria, 20 (6). pp. 553-564.

Jacob, Kallarackel T and Agarwal, Karuna and Gupta, Preeti (2012) Thermodynamics of TmRhO3, Phase Equilibria, and Chemical Potentials in the System Tm-Rh-O. In: JOURNAL OF CHEMICAL AND ENGINEERING DATA, 57 (12). pp. 3677-3684.

Jacob, Kallarackel T and Gupta, Preeti (2013) Electrochemical determination of thermodynamic properties of DyRhO3 and phase relations in the system Dy-Rh-O. In: JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 17 (3). pp. 607-615.

Jacob, Kallarackel T and Jain, Saurabh (2005) Fuel Cell Efficiency Redefined; Carnot Limit Reassessed. In: Q1 - Ninth International Symposium on Solid Oxide Fuel Cells (SOFC IX), 2005-07, USA.

Jacob, Kallarackel T and Saji, Viswanathan S and Waseda, Yoshio (2006) Internal displacement reactions in multicomponent oxides: Part I. Line compounds with narrow homogeneity range. In: International Journal of Applied Ceramic Technology, 3 (4). pp. 312-321.

Jacob, Kallarackel Thomas and Gupta, Sapna and Singh, Prabhakar (2013) Electrochemical Determination of Gibbs Energy of Formation of LaCrO3 Using a Composition-Graded Bielectrolyte. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 96 (10). pp. 3272-3278.

Jacob, L and Kumar, A (2001) Establishing the region of stability for an input queueing cell switch. In: IEEE Proceedings- Communications, 148 (6). pp. 343-347.

Jacob, Thomas K (1985) Knudsen effusion measurements on Cr Mn alloys. In: Zeitschrift für Metallkunde, 76 (6). pp. 415-419.

Jacob, Thomas K and Chandrasekharaiah, Mallasetty S (1990) Measurement of the Gibbs energy of formation of URh3 using an oxide solid electrolyte. In: Zeitschrift für Metallkunde, 81 (7). pp. 509-512.

Jacob, Thomas K and Dasgupta, Niladri and Nafe, Helfried and Aldinger, Fritz (2000) Measurement of Gibbs energy of formation of LaGaO3 using a composition-graded solid electrolyte. In: Journal of Materials Research, 15 (12). pp. 2836-2843.

Jacob, Thomas K and Dasgupta, Niladri and Waseda, Yoshio (1998) Composition-graded solid electrolyte for determination of the Gibbs energy of formation of lanthanum zirconate. In: Journal of the American Ceramic Society, 81 (7). pp. 1926-1930.

Jacob, Thomas K and Jayadevan, Kampurath P and Mallya, Ram M and Waseda, Yoshio (2000) Nanocrystalline $Mg{Al}_2{O}_4$:Measurement of Thermodynamic Properties Using a Solid State Cell. In: Advance Materials, 12 (6). pp. 440-444.

Jacob, Thomas K and Jayadevan, Kampurath P and Waseda, Yoshio (1998) Electrochemical determination of the Gibbs energy of formation of MgAl2O4. In: Journal of the American Ceramic Society, 81 (1). pp. 209-212.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yahio (2002) High-temperature phase chemistry of the system Gd-Pd-O. In: Science and Technology of Advanced Materials, 3 (2). pp. 75-84.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yashio (2002) System La-Pd-O: phase diagram and thermodynamic properties of ternary oxides. In: Solid State Sciences, 4 (2). pp. 205-215.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yoshio (2003) Calcium ruthenates: Determination of Gibbs energies of formation using electrochemical cells. In: Journal of the Electrochemical Society, 150 (4). E227-E232 .

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yoshio (2002) High temperature phase chemistry of system Eu-Pd-O. In: Materials Science and Technology, 18 (10). pp. 1063-1071.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yoshio (2003) Phase equilibria in the systems Ln–Pd–O and thermodynamic properties of $Ln_2Pd_2O_5$ (Ln=Dy, Ho). In: Materials Chemistry and Physics, 77 (2). pp. 331-340.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yoshio (2003) Strontium ruthenates: determination of Gibbs energies of formation using electrochemical cells. In: Materials Science and Engineering B, 103 (2). pp. 152-161.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yoshio (2002) The thermodynamics and phase behaviour of Tb2Pd2O5 and Er2Pd2O5. In: Journal of Chemical Thermodynamics, The, 34 (10). pp. 1509-1529.

Jacob, Thomas K and Mathews, Tom (1992) Phase Relations and Thermodynamic Properties of Condensed Phases in the System Sr–Cu–O. In: Journal of the American Ceramic Society, 75 (12). pp. 3225-3232.

Jacob, Thomas K and Mishra, Saurabh and Waseda, Yoshio (2000) Refinement of the thermodynamic properties of ruthenium dioxide and osmium dioxide. In: Journal of the American Chemical Society, 83 (7). pp. 1745-1752.

Jacob, Thomas K and Mishra, Saurabh and Waseda, Yoshio (2000) Refinement of thermodynamic properties of $ReO_2$. In: Thermochimica Acta, 348 (1-2). pp. 61-68.

Jacob, Thomas K and Mishra, Saurabh and Waseda, Yoshio (2000) Refinement of thermodynamic properties of ReO2. In: Thermochimica Acta, 348 (1-2). pp. 61-68.

Jacob, Thomas K and Shekhar, Chander and Li, Xiaogan and Kale, Girish M (2008) Gibbs energy of formation of $CaCu_3Ti_4O_{12}$ and phase relations in the system $CaO-CuO/Cu_2O-TiO_2$. In: Acta Materialia, 56 (17). pp. 4798-4803.

Jacob, Thomas K and Shekhar, Chander and Li, Xiaogan and Kale, Girish M (2008) Gibbs energy of formation of CaCu3Ti4O12 and phase relations in the system CaO-CUO/CU2O-TiO2. In: Acta Materialia, 56 (17). pp. 4798-4803.

Jacob, Thomas K and Waseda, Y (1994) High-temperature stability of Ca2ZrSi4O12. In: Journal of the american ceramic society, 77 (11). 3033 -3035 .

Jacob , KT and Chandran , A and Mallya , RM (2000) An assessment of the reduction potential of hydrogen plasma. In: Zeitschrift für Metallkunde, 91 (5). 401-405 .

Jacoba, KT and Jeffes, JHE (1973) Interaction between oxygen and silver dissolved in liquid copper. In: The Journal of Chemical Thermodynamics, 5 (3). 365-369 .

Jagtap, Piyush and Gowda, Prarthana and Das, Bikramjit and Kumar, Praveen (2013) Effect of electro-mechanical coupling on actuation behavior of a carbon nanotube cellular structure. In: CARBON, 60 . pp. 169-174.

Jain, NK and Nair, Krishnadas CG and Abraham, KP and Prasad, YVRK (1984) Hot torsional study of electroslag refined RR 58. In: Transactions of the Indian Institute of Metals, 37 (5). pp. 493-497.

Jain, Narendra K and Nair, Chandrathil GK and Abraham, Kadavil P and Prasad, Yellapregada VRK (1983) Hot workability and kinetics of hot deformation in electroslag-refined heat-resistant aluminum alloy. In: Zeitschrift fuer Metallkunde, 74 (10). pp. 633-638.

Jain, Ashish and Anthonysamy, S and Ananthasivan, K and Gupta, GS (2010) Studies on the ignition behaviour of boron powder. In: Thermochimica Acta, 500 (1-2). pp. 63-68.

Jain, Ashish and Anthonysamy, S and Gupta, GS and Ganesan, V (2013) Processing of enriched elemental boron (B-10 similar to 65 at. %). In: Materials Chemistry and Physics, 140 (1). pp. 335-342.

Jain, Ashish and Joseph, Kitheri and Anthonysamy, S and Gupta, GS (2011) Kinetics of oxidation of boron powder. In: Thermochimica Acta, 514 (1-2). pp. 67-73.

Jain, Ashish and Pankajavalli, R and Anthonysamy, S and Ananthasivan, K and Babu, R and Ganesan, V and Gupta, GS (2010) Determination of the thermodynamic stability of TiB2. In: Journal of Alloys and Compounds, 491 (1-2). pp. 747-752.

Jana, S and Bhowmick, R and Kawamura, Y and Chattopadhyay, K and Ramamurty, U (2004) Deformation morphology underneath the Vickers indent in a Zr-based bulk metallic glass. In: Intermetallics, 12 (10-11). pp. 1097-1102.

Jana, S and Ramamurty, U and Chattopadhyay, K and Kawamura, Y (2004) Subsurface deformation during Vickers indentation of bulk metallic glasses. In: Materials Science and Engineering A, 375-37 . pp. 1191-1195.

Jasim, Mohammed K and Dwarakadasa, ES (1992) Dry sliding wear in binary Al-Si alloys at low bearing pressures. In: Journal of Materials Science Letters, 11 (7). pp. 421-423.

Jasim, Mohammed K and Dwarakadasa, ES (1992) Effect of mechanical properties on the adhesive wear of metals. In: Journal of Materials Science Letters, 11 (19). pp. 1309-1311.

Jasim, Mohammed K and Dwarakadasa, ES (1993) Effect of sliding speed on adhesive wear of binary Al-Si alloys. In: Journal of Materials Science Letters, 12 (9). pp. 650-653.

Jaya, Nagamani B and Alam, Md Zafir (2013) Small-scale mechanical testing of materials. In: CURRENT SCIENCE, 105 (8). pp. 1073-1099.

Jaya, Nagamani B and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) A new method for fracture toughness determination of graded (Pt,Ni)Al bond coats by microbeam bend tests. In: PHILOSOPHICAL MAGAZINE, 92 (25-27,). pp. 3326-3345.

Jayadevan, KP and Jacob, KT (2000) Stability of CU(2)Ln(2)O(5) compounds - Comparison, assessment and systematics. In: High Temperature Materials and Processes, 19 (6). pp. 389-397.

Jayadevan, KP and Jacob, KT (2000) Trends in the stability of ternary oxides: Systems M-Pb-O (M = Ca, Sr, Ba). In: High Temperature Materials and Processes, 19 (6). pp. 399-407.

Jayadevan, KP and Kumar, NV and Mallya, RM and Jacob, KT (2000) Use of metastable, dissociated and charged gas species in synthesis: a low pressure analogue of the high pressure technique. In: Journal Of Materials Science, 35 (10). pp. 2429-2434.

Jayaganthan, R and Hajra, JP (1998) Activities of Al in the Al-Ga-In-Sb system in the temperature range of 1073-1273 K. In: Scripta Materialia, 39 (1). pp. 1-5.

Jayaganthan, R and Hajra, JP (1997) Applicability of a dilute quaternary model in interpreting the thermodynamic properties of the Fe-Ni-Ta-N system. In: Scripta Materialia, 37 (10). pp. 1539-1544.

Jayaganthan, R and Hajra, JP (1996) Thermodynamics and phase equilibria in the A1-Ga system. In: Materials Science & Engineering B, 38 (1-2). pp. 96-102.

Jayaganthan, R and Hajra, JP (1998) Thermodynamics and phase equilibria in the Al-In-Sb system. In: Metallurgical and Materials Transactions A, 29 (2). pp. 611-616.

Jayaram, V (1998) Low temperature consolidation of metastable phases in the Al2O3-ZrO2 binary system. In: 6th Meeting of the International Conference on Ceramic Processing Science, SEP 07-10, 1997, Santa Barbara, California.

Jayaram, V (1996) The role of volatile solute elements in directed melt oxidation of aluminium alloys. In: Journal of Materials Science, 31 (17). pp. 4591-4598.

Jayaram, V and Bhowmick, S and Xie, ZH and Math, S and Hoffman, M and Biswas, SK (2006) Contact deformation of TiN coatings on metallic substrates. In: Materials Science and Engineering: A, 423 (1-2). 08-13.

Jayaram, V and Biswas, SK (1999) Wear of $Al_2O_3-SiC-(Al,Si)$ melt oxidised ceramic composites. In: Wear, 225-22 (2). pp. 1322-1326.

Jayaram, V and Biswas, SK (1999) Wear of Al2O3-SiC-(Al,Si) melt oxidised ceramic composites. In: Wear, 225 (part 2). pp. 1322-1326.

Jayaram, V and Daniel, BS and Nagendra, N and Muralidhar, HR (1994) MMC, CMC And Microstructural Gradients by Nitridation of al Alloys. In: 3rd IUMRS International Conference on Advanced Materials (ICAM), AUG 31-SEP 04, 1993, SUNSHINE CITY, JAPAN.

Jayaram, V and Daniel, BSS and Nagendra, N (1994) MMC, CMC AND Microstructural gradients by nitridation of al alloys. In: 3rd IUMRS International Conference on Advanced Materials (ICAM), AUG 31-SEP 04, 1993, SUNSHINE CITY, JAPAN.

Jayaram, V and De Graef, M and Levi, CG (1994) Metastable extension of the fluorite phase field in Y2O3---ZrO2 and its effect on grain growth. In: Acta Metallurgica et Materialia, 42 (6). pp. 1829-1846.

Jayaram, V and Graef, M and Levi, CG (1994) Metastable extension of the fluorite phase field in Y2O3---ZrO2 and its effect on grain growth. In: Acta Metallurgica et Materialia, 42 (6). 1829 -1846 .

Jayaram, V and Kumar, S and Mani, TV and Saifullah, MSM and Sarkar, J and Warrier, KGK (1996) Infiltration of Al2O3-Al composites into coated silicon carbide. In: Discussion Meeting on Inorganic Matrix Composites, MAR 08-11, 1995, INDIAN INST SCI, BANGALORE, INDIA.

Jayaram, V and Mishra, RS and Majumdar, B and Lesher, C and Mukherjee, A (1998) Dense nanometric ZrO2---Al2O3 from spray-pyrolysed powders. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 133 (1-2). pp. 25-31.

Jayaram, V and Viswanathan, NN and Abinandanan, TA (1999) A dislocation pile-up model for the yield stress of a composite. In: Acta Materialia, 47 (5). pp. 1635-1643.

Jayaram, Vikram and Rajkumar, J and Rani, Sirisha B (1999) Synthesis of metastable, wurzite-based zinc oxide-cobalt(II) oxide solid solutions by spray pyrolysis. In: Journal of the American Ceramic Society, 82 (2). pp. 473-476.

Jayaram, Vikram and Rani, Sirisha B (2001) Soft chemical routes to the synthesis of extended solid solutions of wurtzite ZnO–MO (M=Mg,Co,Ni). In: Materials Science and Engineering A, 304-30 . pp. 800-804.

Jayaraman, N and Rao, MM (1980) Kinetics of austenite reversion in fe-ni-mn alloys I-Studies in ternary fe--12ni-4mn alloy by dilatometry. In: Journal of Metals, 32 (8). pp. 48-49.

Jayaraman, V and Periaswami, G and Kutty, TRN (2000) Extended stability ranges of \beta-aluminas with increasing ionic radii of metal alkali ions. In: Materials Letters, 45 (02). pp. 71-78.

Jeevan, HS and Ranganathan, S (2004) A new basis for the classification of quasicrystals. In: Journal of Non-Crystalline Solids, 334-33 . pp. 184-189.

Jeffes, JHE and Jacob, KT (1972) Physical chemistry of fire refining of copper. In: Metallurgical Chemistry Symposium . pp. 513-525.

Jeyakumar, M and Kumar, S (2005) Microstructural evolution of spray formed 7075 Al alloy. In: Transactions of the Indian Institute of Metals, 58 (4). pp. 617-623.

Jeyakumar, M and Kumar, S and Gupta, GS (2009) The Influence of Processing Parameters on Characteristics of an Aluminum Alloy Spray Deposition. In: Materials and Manufacturing Processes, 24 (6). pp. 693-699.

Jeyakumar, M and Gupta, GS and Kumar, Subodh (2008) Modeling of gas flow inside and outside the nozzle used in spray deposition. In: Journal of Materials Processing Technology, 203 (1-3). pp. 471-479.

Jeyakumar, M and Kumar, S and Gupta, GS (2010) Microstructure and Properties of the Spray-Formed and Extruded 7075 Al Alloy. In: Materials and Manufacturing Processes, 25 (8). pp. 777-785.

Jin, HW and Ayer, R and Koo, JY (2007) Reciprocating wear mechanisms in a Zr-based bulk metallic glass. In: Journal of Materials Research, 22 (2). pp. 264-273.

Jiran, E and Jacob, KT (1986) Computation of thermodynamic properties of multicomponent solutions: extension of Toop model. In: Metallurgical and Materials Transactions A, 17 (6). pp. 1102-1104.

Jiran, E and Jacob, KT (1983) Computation of thermodynamic properties of quaternary and higher order systems from binary data using shortest distance composition paths. In: Calphad, 7 (1). pp. 41-50.

Jog, CS and Sankarasubramanian, R and Abinandanan, TA (2000) Symmetry-breaking transitions in equilibrium shapes of coherent precipitates. In: Journal of the Mechanics and Physics of Solids, 48 (11). pp. 2363-2389.

Johannesson, B and Ogin, SL and Surappa, MK and Tsakiropoulos, P and Brynjolfsson, S and Thorbjornsson, IO (2001) Effect of reinforcement geometry on matrix stresses in three aluminium metal matrix composite systems. In: Scripta Materialia, 45 (8). pp. 993-1000.

Jose, Feby and Ramaseshan, R and Sundari, Tripura S and Dash, S and Tyagi, AK and Kiran, MSRN and Ramamurty, U (2012) Nanomechanical and optical properties of highly a-axis oriented AlN films. In: APPLIED PHYSICS LETTERS, 101 (25).

Joseph, Alex and Ramamurthy, Praveen C and Subramanian, Sankaran (2011) Imidazole Functionalized Polyaniline: Synthesis, Characterization, and Cu (II) Coordination Studies. In: Journal of Applied Polymer Science, 123 (1). pp. 526-534.

Joseph, Sudha and Kumar, S (2013) A systematic investigation of fracture mechanisms in Al-Si based eutectic alloy-Effect of Si modification. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 588 . pp. 111-124.

Joseph, Sudha and Tewari, Asim and Kumar, S (2013) The Fracture Characteristics of a Near Eutectic Al-Si Based Alloy Under Compression. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (5). pp. 2358-2368.

Joseyphus, Justin R and Narayanasamy, A and Sivakumar, N and Guyot, M and Krishnan, R and Ponpandian, N and Chattopadhyay, K (2004) Mechanochemical decomposition of Gd3Fe5O12 garnet phase. In: Proceedings of the International Conference on Magnetism (ICM 2003), JUL 27-AUG 01, 2003, Rome, ITALY.

Joseyphus, RJ and Narayanasamy, A and Sivakumar, N and Guyot, M and Krishnan, R and Ponpandian, N and Chattopadhyay, K (2004) Mechanochemical decomposition of $Gd_{3}Fe_{5}O_{12}$ garnet phase. In: Journal of Magnetism and Magnetic Materials, 272 (3). pp. 2257-2259.

Juneja, JM and Abraham, KP and Iyengar, GNK (1986) Thermodynamic study of liquid magnesium-aluminium alloys by vapour pressure measurement using the boiling point method. In: Scripta Metallurgica, 20 (2). pp. 177-180.

Jyothi, N and Sudha, KN and Natarajan, KA (1989) Electrochemical Aspects of Selective Bioleaching of Sphalerite and Chalcopyrite from Mixed Sulfides. In: International Journal of Mineral Processing, 27 (3-4). pp. 189-203.

K

K, Padmanabhan and *, Kishore (1992) Influence of Circular Defects on the Flexural Strength of Kevlar/Epoxy Composites. In: Journal of Reinforced Plastics and Composites, 11 (2). pp. 211-219.

Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Flow Instabilities and fracture in Ti-6Al-4V deformed in compression at 298 K to 673 K. In: Metallurgical and materials transactions a, 25 (10). 2173-2179 .

Kailas, SV and Prasad, YVRK and Biswas, SK (1993) Microstructural features of flow instability in α-titanium cylinders under high strain rate compression at 25°C to 400°C. In: Metallurgical Transactions. Physical Metallurgy and Material, 24 (11). pp. 2513-2520.

Kalasad, MN and Rabinal, MK and Mulimani, BG and Avadhani, GS (2008) Temporal evolution of capped cadmium sulfide nanoparticles. In: Semiconductor Science and Technology, 23 . 045009: 1-5.

Kale, GM and Jacob, KT (1989) Gibbs energy of formation of co2sio4 and phase-relations in the system co-si-o. In: Mineral Processing and Extractive Metallurgy (IMM Transactions Section C), 98 . C117 -C122.

Kale, GM (1992) Discussion of ``phase diagram of Cu2O-CuO-Y2O3 system in air''. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (1). p. 382.

Kale, GM and Asokan, T (1993) Electrical properties of cobalt‐zinc ferrites. In: Applied Physics Letters, 62 (19). pp. 2324-2325.

Kale, GM and Jacob, KT (1992) Chemical potential of oxygen for iron-rutile-ilmenite and iron-ilmenite-ulvospinel equilibria. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 23 (1). pp. 57-64.

Kale, GM and Jacob, KT (1989) Gibbs Energies of Formation of $CuYO_2$ and $Cu_2Y_2O_5$ and Phase Relations in the System Cu-Y-O. In: Chemistry of Materials, 1 (5). pp. 515-519.

Kale, GM and Jacob, KT (1989) Phase relations and thermodynamic properties of compounds in the pseudobinary system BaO-Y2O3. In: Solid State Ionics, 34 (4). pp. 247-252.

Kale, GM and Jacob, KT (1989) Thermodynamic Stability of Potassium-beta-Alumina. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 20 (5). pp. 687-691.

Kale, GM and Jacob, KT (1989) Thermodynamic partial properties of Na2O in Nasicon solid solution, Na1+xZr2SixP3-xO12. In: Journal of Materials Research, 4 (2). pp. 417-422.

Kale, GM and Jacob, KT (1989) properties of Na2O in Nasicon solid solution, Na1+xZr2SixP3-xO12. In: Journal of Materials Research, 4 (2). pp. 417-422.

Kale, GM and Pandit, SS and Jacob, KT (1988) Thermodynamics of Cobalt (II, III) Oxide (Co3O4): Evidence of Phase Transition. In: Nippon Kinzoku Gakkai Kaiho (alternate title), 29 (2). pp. 125-132.

Kale, Girish M (1991) Activity–Composition Relations in the Nickel Oxide–Magnesium Oxide System at 1300 K by the Solid-State Galvanic Cell Technique. In: Journal of the American Ceramic Society, 74 (9). 2209 -2213.

Kale, Girish M and Jacob, KT and Wang, Ling and Hong, Yanruo (2006) Solid state electrochemical sensor for monitoring Mg in Al refining process. In: Electrochemical Society Transactions, 1 (13). pp. 1-11.

Kallarackel, Thomas Jacob and Gupta, Sapna and Singh, Prabhakar (2013) Thermodynamic Properties of LaCrO4, La2CrO6, and La2Cr3O12, and Subsolidus Phase Relations in the System Lanthanum-Chromium-Oxygen. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 96 (12). pp. 3933-3938.

Kalyani, Ajay Kumar and Garg, Rohini and Ranjan, Rajeev (2009) Competing A-site and B-site driven ferroelectric instabilities in the (1-x)PbTiO3-(x)BiAlO3 system. In: Applied physics letters, 94 (20). 202903-1-202903-3.

Kalyani, Ajay Kumar and Garg, Rohini and Ranjan, Rajeev (2009) Tendency to promote ferroelectric distortion in Pr-modified PbTiO3. In: Applied physics letters, 95 (22).

Kalyani, Ajay Kumar and Ranjan, Rajeev (2013) Anomalous piezoelectric response due to stabilization of two ferroelectric phases in Zr-modified BaTiO3. In: Journal of Physics: Condensed Matter, 25 (36). 362203_1-362203_6.

Kalyani, Ajay Kumar and Senyshyn, Anatoliy and Ranjan, Rajeev (2013) Polymorphic phase boundaries and enhanced piezoelectric response in extended composition range in the lead free ferroelectric BaTi1-xZrxO3. In: JOURNAL OF APPLIED PHYSICS, 114 (1).

Kamble, SN and Kubair, DV and Ramamurthy, U (2009) Indentation strength of a piezoelectric ceramic: Experiments and simulations. In: International Symposium on Indentation Behavior of Materials, MAR 2009, Hyderabad, pp. 926-935.

Kamble, Smita and Song, Duk-Yong and Dhavamani, Abitha and Gupta, Govind Sharan and Maruoka, Nobuhiro and Kitamura, Shin-ya and Shibata, Hiroyuki (2012) Modelling of metal-slag emulsion. In: 5th International Congress on the Science and Technology of Steel-making, OCT 01-03, 2012, Dresden, GERMANY, pp. 227-236.

Kang, SC and Saito, M and Suzuki, S and Jacob, KT and Waseda, Y (2001) XPS study of surface properties in the superionic conducting glass of (AgI)(0.4)(Ag2O)(0.3)(MoO3)(0.3) bombarded by ion and electron beams. In: High Temperature Materials And Processes, 20 (1). pp. 51-56.

Kang, S and Waseda, Y and Jacob, KT and Saito, M (2000) Anomalous X-ray scattering study of local structures in the superionic conducting glass (AgBr)0.4 (Ag2O)0.3 (GeO2)0.3. In: Science and Technology of Advanced Materials, 1 (1). pp. 37-42.

Kang, S and Waseda, Y and Jacob, KT and Saito, M (2000) Transport properties of superionic conducting glasses (AgX)0.4(Ag2O)0.3(GeO2)0.3 (X = I, Br, Cl). In: Materials transactions - JIM, 41 (12). pp. 1670-1674.

Kannan, C and Subramanian, S and Lahiri, AK (1989) Studies on slag-metal interface in electroslag casting using thermocouples. In: Transactions of the Indian Institute of Metals, 42 (5). pp. 499-502. (Unpublished)

Kano, S and Waseda, Y and Iwase, M and Jacob, KT (1992) A Sensor for Sulfur Gas Based on Silver β-Alumina. In: High Temperature Materials and Processes, 10 (2). pp. 101-105.

Kano, S and Waseda, Y and Jacob, KT (1992) A thermodynamic interpretation of the zonal arrangement of minerals in the bedded manganese deposits of the Noda tamagawa mine, Japan. In: High Temperature Materials and Processes, 10 (2). pp. 107-118.

Kapilashrami, A and Lahiri, AK and Seetharaman, S (2005) Bubble formation through reaction at liquid-liquid interfaces. In: Steel Research International, 76 (9). pp. 616-623.

Kapilashrami, A and Gornerup, M and Lahiri, AK and Seetharaman, S (2006) Foaming of slags under dynamic conditions. In: Metallurgical and Materials Transactions B, 37 (1). pp. 109-117.

Kapilashrami, A and Lahiri, Ashok Kumar and Gornerup, M and Seetharaman, S (2006) The fluctuations in slag foam under dynamic conditions. In: Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science, 37 (1). pp. 145-148.

Kapilashrami, E and Jakobsson, A and Seetharaman, S and Lahiri, AK (2003) Studies of the wetting characteristics of liquid iron on dense alumina by the X-ray sessile drop technique. In: Metallurgical and Materials Transactions B, 34 (2). pp. 193-199.

Kapilashrami, E and Seetharaman, S and Lahiri, AK and Cramb, AW (2003) Investigation of the reactions between oxygen-containing iron and SiO2 substrate by X-ray sessile-drop technique. In: Metallurgical and Materials Transactions B, 34 (5). pp. 647-652.

Karan, Goutam and Natarajan, KA and Modak, JM (1996) Estimation of mineral-adhered biomass of Thiobacillusferrooxidans by protein assay-some problems and remedies. In: Hydrometallurgy, 42 (02). pp. 169-175.

Karmakar, G and Sen, R and Meikap, AK and Chattopadhyay, SK and Chatterjee, SK and Surappa, MK (1999) The studies on micro-structural defects in deformed composite matrix of Al-Si-Mg and SiC. In: Japanese Journal of Applied Physics, 38 (11). pp. 6450-6453.

Karthikeyan, CS and Kishore, * and Sankaran, S (2000) Comparison of compressive properties of fiber-free and fiber-bearing syntactic foams. In: Journal of Reinforced Plastics and Composites, 19 (9). pp. 732-742.

Karthikeyan, CS and Sankaran, S and Kishore, * (2007) Investigation of bending modulus of fiber-reinforced syntactic foams for sandwich and structural applications. In: Polymers for Advanced Technologies, 18 (3). pp. 254-256.

Karthikeyan, Chedarampet S and Sankaran, Sundaram and Kishore, * (2005) Flexural Behaviour of Fibre-Reinforced Syntactic Foams. In: Macromolecular Materials and Engineering, 290 (1). pp. 60-65.

Karthikeyan, S and Kolluri, M and Ramamurty, U (2007) Effect of Lateral Constraint on the Mechanical Properties of a Closed-Cell Al Foam: Part II. Strain-Hardening Models. In: Metallurgical and Materials Transactions A, 38 (9). pp. 2014-2023.

Karthikeyan, B and Sandeep, CS Suchand and Pandiyarajan, T and Venkatesan, P and Philip, Reji (2009) Optical and nonlinear absorption properties of Na doped ZnO nanoparticle dispersions. In: Applied Physics Letters, 95 (2).

Karthikeyan, CS and Kishore, * and Sankaran, S (2001) Effect of absorption in aqueous and hygrothermal media on the compressive properties of glass fiber reinforced syntactic foam. In: Journal of Reinforced Plastics and Composites, 20 (11). pp. 982-993.

Karthikeyan, CS and Sankaran, S and Kishore, * (2004) Elastic behaviour of plain and fibre-reinforced syntactic foams under compression. In: Materials Letters, 58 (6). pp. 995-999.

Karthikeyan, CS and Sankaran, S and Kishore, * (2000) Influence of chopped strand fibres on the flexural behaviour of a syntactic foam core system. In: Polymer International, 49 (2). pp. 158-162.

Karthikeyan, CS and Sankaran, S and Kumar, Jagdish MN and Kishore, * (2001) Processing and compressive strengths of syntactic foams with and without fibrous reinforcements. In: Journal of Applied Polymer Science, 81 (2). 405 -411.

Karthikeyan, S and Agrawal, A and Rigney, DA (2009) Molecular dynamics simulations of sliding in an Fe-Cu tribopair system. In: 17th International Conference on Wear of Materials, APR 19-23, Las Vegas, NV, pp. 1166-1176.

Karthikeyan, S and Unocic, RR and Sarosi, PM and Viswanathan, GB and Whitis, DD and Mills, MJ (2006) Modeling microtwinning during creep in Ni-based superalloys. In: Scripta Materialia, 54 (6). pp. 1157-1162.

Karthikeyan, Subramanian and Moon, Junho and Viswanathan, Gopal B and Mills, Michael J (2003) Application of a modified jogged-screw model for creep of titanium aluminides: evaluation of the key substructural parameters. In: MRS Proceedings in Multiscale Modeling of Materials, 2003.

Kasai, E and Saito, F and Waseda, Y and Jacob, KT and Hirota, K and Okabe, TH (1998) Thermodynamic properties of oxygen in RE-O (RE = Gd, Tb, Dy, Er) solid solutions. In: Journal of Alloys and Compounds, 279 (2). pp. 184-191.

Kashyap, KT and Murali, S and Raman, KS and Murthy, KSS (1993) Casting and heat treatment variables of Al–7Si–Mg alloy. In: Materials Science and Technology, 9 (3). pp. 189-203.

Kashyap, S and Chattopadhyay, K (2013) Synthesis and phase evolution in Nb/Si multilayers obtained by sequential laser ablation. In: THIN SOLID FILMS, 531 . pp. 312-319.

Kashyap, S and Tiwary, CS and Chattopadhyay, K (2011) Effect of Gallium on microstructure and mechanical properties of Nb-Si eutectic alloy. In: Intermetallics, 19 (12). pp. 1943-1952.

Kashyap, S and Tiwary, CS and Chattopadhyay, K (2013) Microstructural and mechanical behavior study of suction cast Nb-Si binary alloys. In: Materials Science and Engineering: A, 583 . pp. 188-198.

Kashyap, S and Tiwary, CS and Chattopadhyay, K (2013) Microstructure and mechanical properties of oxidation resistant suction cast Nb-Si-Al alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 559 . pp. 74-85.

Kaushal, S and Kishore, * (1992) Analysis of deformation behaviour and fracture features in glass-epoxy composites toughened by rubber and carbon additions. In: Journal of Materials Science Letters, 11 (2). pp. 86-88.

Kaushal, S and Tankala, T and Rao, RMVGK and Kishore, * (1991) Some hygrothermal effects on the mechanical behaviour and fractography of glass-epoxy composites with modified interface. In: Journal of Materials Science, 26 (23). pp. 6293-6299.

Kavitha, R and Hegde, SR and Jayaram, Vikram (2003) Oxide films by combustion pyrolysis of solution precursors. In: Materials Science and Engineering A, 359 (1-2). pp. 18-23.

Kavitha, R and Jayaram, V (2007) Band-Gap Engineering in ZnO-MgO Films Prepared by Combustion Flame Pyrolysis of Solution Precursors. In: Journal of Electronic Materials, 36 (10). pp. 1326-1332.

Kavitha, R and Jayaram, V (2007) Deposition and characterization of alumina films produced by combustion flame pyrolysis. In: Surface and Coatings Technology, 201 (6). pp. 2491-2499.

Kavitha, R and Meghani, S and Jayaram, V (2007) Synthesis of titania films by combustion flame spray pyrolysis technique and its characterization for photocatalysis. In: Materials Science and Engineering:B, 139 (2-3). pp. 134-140.

Kavitha, Ranganathan and Jayaram, Vikram (2010) Deposition of ZnO Films by Combustion Flame Pyrolysis of Solution Precursors. In: International Journal of Applied Ceramic Technology, 7 (4). pp. 482-492.

Keryvin, V and Prasad, Eswar K and Gueguen, Y and Sangleboeuf, JC and Ramamurty, U (2008) Temperature dependence of mechanical properties and pressure sensitivity in metallic glasses below glass transition. In: Philosophical Magazine, 88 (12). pp. 1773-1790.

Khan, Bijoysri and Viswanath, B (2001) Effect of Water Absorption on the Impact Response of Carbon-Epoxy System Containing Buffer Strips. In: Journal of Reinforced Plastics and Composites, 20 (16). pp. 1430-1443.

Khan, Patan Yousaf and Bhattacharya, Victoria and Biswas, Krishanu and Chattopadhyay, Kamanio (2013) Melting and solidification behavior of Pb-Sn embedded alloy nano-particles. In: JOURNAL OF NANOPARTICLE RESEARCH, 15 (11).

Khana, Kirity Bhusan and Kutty, TRG and Surappa, MK (2006) Hot hardness and indentation creep study on Al5% Mg alloy matrixB4C particle reinforced composites. In: Materials Science And Engineering A, 427 (1-2). pp. 76-82.

Kilo, Martin and Argirusis, Christos and Borchardt, Guenter and Ghosh, Santonu and Chokshi, Atul H (2008) Creep in scandia stabilized zirconia. In: Solid State Ionics, 179 (21-26). pp. 804-806.

Kim, DH and Chattopadhyay, K and Cantor, B (1990) An in situ electron microscope investigation of the icosahedral-to-decagonal quasicrystalline transformation in Al-20 at.% Mn. In: Philosophical Magazine A & B, 62 (2). pp. 157-171.

Kim, HJ and Karthikeyan, S and Rigney, D (2009) A simulation study of the mixing, atomic flow and velocity profiles of crystalline materials during sliding. In: 17th International Conference on Wear of Materials, 19-23, Las Vegas, NV, pp. 1130-1136.

Kim, Ju-Heon and Kim, Dong-Ik and Suwas, Satyam and Fleury, Eric and Yi, Kyung-Woo (2013) Grain-Size Effects on the High-Temperature Oxidation of Modified 304 Austenitic Stainless Steel. In: OXIDATION OF METALS, 79 (3-4, S). pp. 239-247.

Kim, SH and Chattopadhyay, K and Inkson, BJ and Möbus, G and Kim, WT and Kim, DH (2006) Spontaneous formation of the B2 phase from a decagonal quasicrystal under reduced constraint. In: Journal of Materials Science, 41 (18). pp. 6081-6086.

Kim, SH and Chattopadhyay, K and Kim, KB and Kim, WT and Kim, DH (2006) Orthorhombic approximant phases and their relation to quasicrystals in mechanically alloyed Al–Cu–Fe–Si alloys. In: Philosophical Magazine Letters, 86 (7). pp. 425-433.

Kim, SH and Song, GS and Fleury, E and Chattopadhyay, K and Kim, WT and Kim, DH (2002) Icosahedral quasicrystalline and hexagonal approximant phases in the Al-Mn-Be alloy system. In: Philosophical Magazine A & B, 82 (8). pp. 1495-1508.

Kim , DH and Chattopadhyay, K and Cantor, B (1991) Quasicrystalline and related crystalline phases in a rapidly solidified 2024-2Li aluminium alloy. In: Acta Metallurgica et Materialia, 39 (5). pp. 859-875.

Kima, Hong Jin and Karthikeyan, S and David, Rigneya (2007) The structure and composition of aluminum wear debris generated by unlubricated sliding in different environments. In: Wear, 263 (1-6). pp. 849-857.

Kini, Maya and Chokshi, Atul H (2010) Creep in TiO2 doped Zirconia: Implications for high strain rate superplasticity. In: 15th International Conference on the Strength of Materials (ICSMA 15), AUG 16-21, 2009 , Dresden, GERMANY.

Kini, Maya and Chokshi, Atul H (2010) The Influence of Titania on Creep in Superplastic Zirconia. In: Journal of the American Ceramic Society, 93 (6). pp. 1725-1731.

Kiran, MSRN and Krishna, Ghanashyam M and Padmanabhan, KA (2011) Substrate-dependent structure, microstructure, composition and properties of nanostructured TiN films. In: Solid State Communications, 151 (7). pp. 561-563.

Kiran, MSRN and Kshirsagar, S and Krishna, MG and Surya, Tewari P (2010) Structural, optical and nanomechanical properties of (1 1 1) oriented nanocrystalline ZnTe thin films. In: The European Physical Journal Applied Physics, 51 (1). 10502 .

Kiran, MSRN and Kshirsagar, S and Krishna, MG and Tewari, Surya P (2010) Structural, optical and nanomechanical properties of (1 1 1) oriented nanocrystalline ZnTe thin films. In: The European Physical Journal Applied Physics, 51 (1).

Kiran, MSRN and Raidongia, Kalyan and Ramamurty, U and Rao, CNR (2011) Improved mechanical properties of polymer nanocomposites incorporating graphene-like BN: Dependence on the number of BN layers. In: Scripta Materialia, 64 (6). pp. 592-595.

Kiran, MSRN and Ramamurty, U and Misra, Abha (2012) Mechanical and electrical contact resistance characteristics of a cellular assembly of carbon nanotubes. In: NANOTECHNOLOGY, 24 (1).

Kiran, MSRN and Varughese, Sunil and Ramamurty, U and Desiraju, Gautam R (2012) Effect of dehydration on the mechanical properties of sodium saccharin dihydrate probed with nanoindentation. In: CrystEngComm, 14 (7). pp. 2489-2493.

Kiran, MSRN and Varughese, Sunil and Reddy, Malla C and Ramamurty, U and Desiraju, Gautam R (2010) Mechanical Anisotropy in Crystalline Saccharin: Nanoindentation Studies. In: Crystal Growth & Design, 10 (10). pp. 4650-4655.

Kishore, and Vasu, KI (1978) A study of the deformation slip lines in quenched and aged Al-2% Ge alloy. In: Metallography, 11 (1). pp. 51-59.

Kishore, * (1984) Some aspects of dislocation-precipitate interaction in under-aged aluminium-germanium alloy. In: Bulletin of Materials Science, 6 (6). pp. 1041-1046.

Kishore, * and Barpanda, P and Kulkarni, SM (2005) Compression Strength of Saline Water-exposed Epoxy System Containing Fly Ash Particles. In: Journal pf Reinforced Plastics and Composites, 24 (15). 1567-1576.

Kishore, * and Harimkar, SP and Desai, DS (2004) Impact response of epoxy systems containing short fibres and/or oxide particles as reinforcements. In: Polymer International, 53 (9). pp. 1274-1281.

Kishore, * and Khan, B (1998) Comparative evaluation of impact performance of laminate composites containing impact induced/mechanically inserted defects. In: Journal of Reinforced Plastics and Composites, 17 (16). pp. 1463-1471.

Kishore, * and Khan, Bijoysri and Viswanath, B (2000) Effect of insertion of buffer-strip on the response of carbon-epoxy system in short beam tests. In: Advanced Composites Letters, 9 (5). pp. 329-333.

Kishore, * and Kiran, Raghu TR (2006) Impact response in glass-epoxy system with and without perforated PTFE-bearing material at the mid-thickness. In: Composite Interfaces, 13 (7). pp. 633-646.

Kishore, * and Kumar, Kiran B (2004) The influence of the type and positioning of the interface material on the impact behaviour in two-layered epoxy pieces. In: Composite Interfaces, 11 (1). pp. 83-93.

Kishore, * and Mahajan, SS and Kulkarni, SM (2003) Fractographic features of dry and water absorbed epoxy based ash filled particulate composites with and without surface treatments for fillers following short beam test. In: Practical Metallography, 40 (1). pp. 34-48.

Kishore, * and Mahajan, SS and Kulkarni, SM (2003) Water Ingression and Compression Properties of Epoxy Containing Ash Particles with their Surfaces Containing Paraffin Oil Film. In: Journal of Reinforced Plastics and Composites, 22 (16). pp. 1467-1476.

Kishore, * and Ravikumar, NL and Kulkarni, SM (2004) Compression Strength of Aqueous Media Exposed Epoxy System Containing Silane Surface Bearing Fly Ash Particles. In: Journal of Reinforced Plastics and Composites, 23 (9). pp. 959-968.

Kishore, * and Ravikumar, NL and Kulkarni, SM (2004) Correlating failure features to impact data in epoxy systems without and with silane surface bearing fly ash filler particles in varying amounts. In: Praktische Metallographie-Practical Metallography, 41 (1). pp. 22-36.

Kishore, * and Venkatraman, S (1998) Failure features of foam bearing glass-epoxy composites subjected to compressive loading. In: Praktische Metallographie: Archives of Practical Metallography, 35 (1). pp. 31-39.

Kishore, * and Khan, B (1999) Micro and macroscopic features of impact failed defect induced carbon-epoxy composites. In: Praktische Metallographie / Practical Metallography, 36 (9). pp. 487-494.

Kishore, * and Khan, Bijoysri and Viswanath, B (2002) Impact Response of Carbon-Epoxy Laminates Containing Buffer-Strip Layers. In: Journal of Applied Polymer Science, 85 (4). pp. 752-761.

Kishore, * and Khan, Bijoysri and Viswanath, B (2001) On the utility of an instrumented impact set-up to characterise the response of discontinuous buffer strips in carbon–epoxy systems in dry and wet conditions. In: Polymer Testing, 20 (4). pp. 453-457.

Kishore, * and Kulkarni, SM and Sharathchandra, S and Sunil, D (2002) On the use of an instrumented set-up to characterize the impact behaviour of an epoxy system containing varying fly ash content. In: Polymer Testing, 21 (7). pp. 763-771.

Kishore, * and Kulkarni, SM and Sunil, D and Sharathchandra, S (2002) Effect of surface treatment on the impact behaviour of fly-ash filled polymer composites. In: Polymer International, 51 (12). pp. 1378-1384.

Kishore, * and Kumar, Keshav (1998) Sliding wear studies in epoxy containing alumina powders. In: High Temperature Materials and Processes, 17 (4). pp. 271-274.

Kishore, * and Maiti, A (2001) Compressive behavior and fracture features of rubber bearing glass-epoxy composites exposed to aqueous media. In: Journal of Reinforced Plastics and Composites, 20 (17). pp. 1546-1554.

Kishore, * and Ramanathan, S and Rao, RMVGK (1996) Repeated drop weight impacts and post-impact ILSS tests on glass-epoxy composite. In: Bulletin of Materials Science, 19 (6). pp. 1133-1141.

Kishore, * and Ravikumar, NL and Sunil, D (2003) The effect of a starch envelope on fly ash particles on the impact properties of filled epoxy composites. In: Advanced Composites Letters, 12 (2). pp. 45-54.

Kishore, * and Sampathkumaran, P and Seetharamu, S (2005) Erosion and abrasion characteristics of high manganese chromium irons. In: Wear, 259 (1-6). pp. 70-77.

Kishore, * and Sampathkumaran, P and Seetharamu, S and Murali, A and Kumar, RK (2001) On the SEM features of glass–epoxy composite system subjected to dry sliding wear. In: Wear, 247 (2). pp. 208-213.

Kishore, * and Sampathkumaran, P and Seetharamu, S and Thomas, P and Janardhana, M (2005) A study on the effect of the type and content of filler in epoxy-glass composite system on the friction and slide wear characteristics. In: Wear, 259 (1-6). pp. 634-641.

Kishore, * and Sampathkumaran, P and Seetharamu, S and Vynatheya, S and Murali, A and Kumar, RK (2000) SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric–epoxy composites with different fillers. In: Wear, 237 (1). pp. 20-27.

Kishore, * and Santra, S (2005) Impact Studies in Elastomer, Fly Ash, and Hybrid-filled Epoxy Composites: Part I - Room Temperature Curing. In: Journal of Reinforced Plastics and Composites, 24 (9). pp. 903-922.

Kishore, * and Santra, Sanjitarani (2005) Impact Studies in Elastomer, Fly Ash, and Hybrid-filled Epoxy Composites: Part II -Comparison of Data and Fracture Features of the Samples Cured via a Single Room Temperature and Multiple High Temperatures. In: Journal of Reinforced Plastics and Composites, 24 (10). pp. 1013-1024.

Kishore, * and Santra, Sanjitarani (2005) Individual and Combined Roles of CTBN and Fly Ash in Epoxy System Under Compression: Correlation between Microscopic Features and Mechanical Behavior. In: Journal of Reinforced Plastics and Composites, 24 (3). pp. 299-313.

Kishore, * and Shankar, Ravi and Sankaran, S (2006) Effects of microballoons’ size and content in epoxy on compressive strength and modulus. In: Journal of Materials Science, 41 (22). pp. 7459-7465.

Kishore, * and Shankar, Ravi and Sankaran, S (2005) Gradient syntactic foams: Tensile strength, modulus and fractographic features. In: Materials Science and Engineering: A, 412 (1&2). pp. 153-158.

Kishore, * and Shankar, Ravi and Sankaran, S (2005) Short Beam Three Point Bend Tests in Syntactic Foams. Part I: Microscopic Characterization of the Failure Zones. In: Journal of Applied Polymer Science, 98 (2). pp. 673-679.

Kishore, * and Shankar, Ravi and Sankaran, S (2005) Short-Beam Three-Point Bend Test Study in Syntactic Foam. Part III: Effects of Interface Modification on Strength and Fractographic Features. In: Journal of Applied Polymer Science, 98 . pp. 687-693.

Kishore, * and Shankar, Ravi and Sankaran, S (2005) Short-Beam Three-Point Bend Tests in Syntactic Foams. Part II: Effect of Microballoons Content on Shear Strength. In: Journal of Applied Polymer Science, 98 . pp. 680-686.

Kishore, * and Singh, VK (1999) Studies on the variations in compression strengths of graphite powders bearing glass-epoxy composites exposed to humid conditions. In: Journal of Reinforced Plastics and Composites, 18 (3). pp. 224-232.

Kishore, * and Sridhar, GB (2002) On evaluating erosion by sand particles in polythene system without and with ceramic particles. In: Polymer Testing, 21 (4). pp. 473-477.

Kishore, * and Vasu, KI (1972) Reply to comments on vacancy-germanium binding energy in aluminium matrix. In: Scripta Metallurgica, 6 (8). pp. 727-729.

Kishore, * and Vasu, KI (1971) Vacancy-germanium binding energy in aluminium matrix. In: Scripta Metallurgica, 5 (11). pp. 997-1000.

Kishore, * and Venkatraman, S (1998) Impact behavior of glass-epoxy composites containing foam material. In: Journal of Applied Polymer Science, 67 (09). pp. 1565-1571.

Kishore, * and Venkatraman, S (1999) Influence of foam/glass-epoxy interface on the macroscopic compressive failure features. In: Composite Interfaces, 6 (6). pp. 557-564.

Kishore, U Sudarsan (1986) Effect of load changes on dynamic coefficient of friction of crystalline and amorphous materials. In: Journal of Materials Science Letters, 5 (2). pp. 198-200.

Kishore, U Sudarsan and Chandran, N and Chattopadhyay, K (1987) On the wear mechanism of iron and nickel based transition metal-metalloid metallic glasses. In: Acta Metallurgica, 35 (7). pp. 1463-1473.

Kobler, Aaron and Lohmiller, Jochen and Schaefer, Jonathan and Kerber, Michael and Castrup, Anna and Kashiwar, Ankush and Gruber, Patric A. and Albe, Karsten and Hahn, Horst and Kuebel, Christian (2013) Deformation-induced grain growth and twinning in nanocrystalline palladium thin films. In: BEILSTEIN JOURNAL OF NANOTECHNOLOGY, 4 . pp. 554-566.

Kohli, R and Vasu, KI (1978) Oxidation-Kinetics of some Zirconium alloys at high-Temperatures. In: Indian Journal of Technology, 16 (3). 105-111 .

Kole, AK and Gupta, S and Kumbhakar, P and Ramamurthy, PC (2014) Nonlinear optical second harmonic generation in ZnS quantum dots and observation on optical properties of ZnS/PMMA nanocomposites. In: OPTICS COMMUNICATIONS, 313 . pp. 231-237.

Kole, AK and Tiwary, CS and Kumbhakar, P (2013) Room temperature synthesis of Mn2+ doped ZnS d-dots and observation of tunable dual emission: Effects of doping concentration, temperature, and ultraviolet light illumination. In: JOURNAL OF APPLIED PHYSICS, 113 (11).

Kole, Arup Kanti and Tiwary, Chandra Sekhar and Kumbhak, Pathik (2013) Ethylenediamine assisted synthesis of wurtzite zinc sulphide nanosheets and porous zinc oxide nanostructures: near white light photoluminescence emission and photocatalytic activity under visible light irradiation. In: CRYSTENGCOMM, 15 (27). pp. 5515-5525.

Kolluri, M and Karthikeyan, S and Ramamurty, U (2007) Effect of Lateral Constraint on the Mechanical Properties of a Closed-Cell Al Foam: I. Experiments. In: Metallurgical and Materials Transactions A, 38 (9). pp. 2006-2013.

Kolluri, M and Mukherjee, M and Garcia-Moreno, F and Banhart, J and Ramamurty, U (2008) Fatigue of a laterally constrained closed cell aluminum foam. In: Acta Materialia, 56 (5). 1114 - 1125.

Korla, Rajesh and Chokshi, Atul H (2010) Strain-rate sensitivity and microstructural evolution in a Mg-Al-Zn alloy. In: Scripta Materialia, 63 (9). pp. 913-916.

Kothai, V and Babu, Prasath R and Ranjan, Rajeev (2013) Metastable morphotropic phase boundary state in the multiferroic BiFeO3-PbTiO3. In: JOURNAL OF APPLIED PHYSICS, 114 (11).

Kothai, V and Ranjan, Rajeev (2012) Synthesis of BiFeO by carbonate precipitation. In: BULLETIN OF MATERIALS SCIENCE, 35 (2). pp. 157-161.

Kothai, V and Senyshyn, Anatoliy and Ranjan, Rajeev (2013) Competing structural phase transition scenarios in the giant tetragonality ferroelectric BiFeO3-PbTiO3: Isostructural vs multiphase transition. In: JOURNAL OF APPLIED PHYSICS, 113 (8).

Kotharu, Venkateswarlu and Nagumothu, Rameshbabu and Arumugam, Chandra Bose and Veerappan, Muthupandi and Sankaran, Subramanian and Davoodbasha, MubarakAli and Nooruddin, Thajuddin (2012) Fabrication of corrosion resistant, bioactive and antibacterial silver substituted hydroxyapatite/titania composite coating on Cp Ti. In: Ceramics International, 38 (1). pp. 731-740.

Kottada, RS and Chokshi, AH (2000) Is there diffusion creep in alumina? In: Creep and Fracture of Engineering Materials and Structures - CFEMS-8, 1-5 Nov. 1999, Tsukuba, Japan, pp. 779-786.

Kottada, Ravi S and Chokshi, Atul H (2003) Hot working of an as-Cast Mg-2%Al alloy. In: 4th International Conference on Processing and Manufacturing of Advanced Materials, JUL 07-11, 2003, Univ Carlos III Madrid, Madrid, Spain, pp. 4417-4422.

Kottada, RS and Chokshi, AH (2007) Grain boundary sliding during diffusion and dislocation creep in a Mg-0.7 pct Al alloy. In: Metallurgical and Materials Transactions A, 38A (8). pp. 1743-1749.

Kottada, RS and Chokshi, AH (2000) The High Temperature Tensile and Compressive Deformation Characteristics of Magnesia Doped Alumina. In: Acta Materialia, 48 (15). pp. 3905-3915.

Kottada, RS and Chokshi, AH (2003) Temperature deformation behaviour of a Mg-0.8Al alloy. In: Materials Science Forum, 447-4 . pp. 227-232.

Kottada, Ravi S and Chokshi, Atul H (2005) Low temperature compressive creep in electrodeposited nanocrystalline nickel. In: Scripta Materialia, 53 (8). pp. 887-892.

Kottokkaran, Ranjith and Rao, Arun D and Ramamurthy, Praveen C (2012) A promising ketone containing alternating copolymer for organic photovoltaics. In: MRS Fall meeting, 2012, Boston USA.

Krishna, Gamidi Rama and Kiran, Mangalampalli SRN and Fraser, Cassandra L and Ramamurty, Upadrasta and Reddy, Chilla Malla (2013) The Relationship of Solid-State Plasticity to Mechanochromic Luminescence in Difluoroboron Avobenzone Polymorphs. In: ADVANCED FUNCTIONAL MATERIALS, 23 (11). pp. 1422-1430.

Krishnamurthy, S and Chokshi, AH (1997) High temperature deformation and densification in alumina-yttria composites. In: 1997 International Conference on Superplasticity in Advanced Materials (ICSAM-97), JAN 29-31, 1997, Indian Institute of Science, Bangalore, India, pp. 369-374.

Krishnan, R and Amirthapandian, S and Mangamma, G and Ramaseshan, R and Dash, S and Tyagi, AK and Jayaram, V and Raj, Baldev (2009) Implantation Induced Hardening of Nanocrystalline Titanium Thin Films. In: International Conference on Nanoscience and Technology, FEB 27-29, 2008, Chennai.

Krishnan, R and David, C and Ajikumar, PK and Dash, S and Tyagi, AK and Jayaram, V and Raj, Baldev (2011) Reactive pulsed laser deposition and characterization of niobium nitride thin films. In: Surface and Coatings Technology, 206 (6). pp. 1196-1202.

Krishnan, R and Mathews, Tom and Balamurugan, AK and Dash, S and Tyagi, AK and Raj, Baldev and Jayaram, Vikram (2010) Reactive Pulsed Laser Deposition of titanium nitride thin film: Optimization of process parameters using Secondary Ion Mass Spectrometry. In: Applied Surface Science, 256 (10). pp. 3077-3080.

Kulkarni, SM and Anuradha, D and Murthy, CRL and Kishore, * (2002) Analysis of filler-fibre interaction in fly ash filled short fibre-epoxy composites using ultrasonic NDE. In: Bulletin of Materials Science, 25 (2). pp. 137-140.

Kulkarni, SM and Kishore, * (2002) Compressive strength of epoxy with bimodal filling of flyash. In: Journal of Reinforced Plastics and Composites, 21 (9). 857-865 .

Kulkarni, SM and Kishore, * (2003) Effect of Filler–Fiber Interactions on Compressive Strength of Fly Ash and Short-Fiber Epoxy Composites. In: Journal of Applied Polymer Science, 87 (5). pp. 836-841.

Kulkarni, SM and Kishore, * (2003) Effects of Filler Content and Hygrothermal Ageing on Compressive Properties of Fly Ash-Epoxy Composites. In: Journal of Reinforced Plastics and Composites, 22 (11). pp. 973-982.

Kulkarni, SM and Kishore, * (2002) Effects of surface treatments and size of fly ash particles on the compressive properties of epoxy based particulate composites. In: Journal of Materials Science (full set), 37 (20). pp. 4321-4326.

Kulkarni, SM and Kishore, * (2002) Studies on Fly Ash–Filled Epoxy-Cast Slabs Under Compression. In: Journal of Applied Polymer Science, 84 (13). pp. 2404-2410.

Kulkarni, SM and Mahajan, SS and Ravikumar, NL and Kishore, * (2002) Water ingression and the role of interface on the compressive properties of epoxy filled with treated fly ash. In: Composite Interfaces, 9 (5). 459-466 .

Kulkarni, UD and Banerjee, S and Ranganathan, S (1991) From periodicity to quasiperiodicity Part I: Octagonal quasicrystals and the 45° twins of the β-Mn structure. In: Scripta Metallurgica et Materialia, 25 (3). pp. 529-532.

Kumar, AK and Laurila, T and Vuorinen, V and Paul, A (2010) Study on the Growth of Nb3Sn Superconductor in Cu(Sn)/Nb Diffusion Couple. In: 5th International Conference on Diffusion in Solids and Liquids, JUN 24-26, 2009, Rome.

Kumar, AK and Laurila, T and Vuorinen, V and Paul, A (2009) Determination of diffusion parameters and activation energy of diffusion in V3Si phase with A15 crystal structure. In: Scripta Materialia, 60 (6). pp. 377-380.

Kumar, AK and Paul, A (2009) Interdiffusion and Growth of the Superconductor Nb3Sn in Nb/Cu(Sn) Diffusion Couples. In: Journal of Electronic Materials, 38 (5). pp. 700-705.

Kumar, AK and Paul, A (2009) Interdiffusion and activation energy in Ti3Au phase with A15 crystal structure. In: Intermetallics, 17 (11). pp. 962-964.

Kumar, AK and Paul, A (2010) Interdiffusion studies in bulk Au-Ti system. In: Journal of Materials Science: Materials in Electronics, 21 (11). pp. 1202-1206.

Kumar, Anil KN and Ray, Basu S and Nagaraja, Valakunja and Raichur, Ashok M (2009) Encapsulation and release of rifampicin using poly(vinyl pyrrolidone)-poly (methacrylic acid) polyelectrolyte capsules. In: Materials Science and Engineering: C, 29 (8). pp. 2508-2513.

Kumar, Anil R and Suresh, MS and Nagaraju, J (2006) Effect of Solar Array Capacitance on the Performance of Switching Shunt Voltage Regulator. In: IEEE Transactions on Power Electronics, 21 (2). pp. 543-548.

Kumar, Dinesh and Gurav, Sampada and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) Synthesis and characterization of nickel/barium hexa-aluminate composite coatings. In: BULLETIN OF MATERIALS SCIENCE, 35 (6). pp. 977-988.

Kumar, Girish and Tison, Christopher K and Chatterjee, Kaushik and Pine, Scott P and McDaniel, Jennifer H and Salit, Marc and Young, Marian F and Simon, Carl G (2011) The determination of stem cell fate by 3D scaffold structures through the control of cell shape. In: Biomaterials, 32 (35). pp. 9188-9196.

Kumar, KG and Pavithran, C and Rohatgi, PK (1981) Recovery of Tartrate from Electroless Copper Baths. In: Plating and Surface Finishing, 68 (7). pp. 70-71.

Kumar, Krishna R and Sinha, SK and Lahiri, AK (1996) Modelling of the Cooling Process on the Runout Table of a Hot Strip Mill-A Parallel Approach. In: Conference Record of the 1996 IEEE Industry Applications Conference. Thirty-First IAS Annual Meeting, IAS '96, 6-10 October, San Diego,California, Vol.4, 2563 -2571.

Kumar, Krishna R and Sinha, SK and Lahiri, AK (1996) Real Time Simulator for the Runout Table of Hot Strip Mills. In: Conference Record of the 1996 IEEE Industry Applications Conference. Thirty-First IAS Annual Meeting, IAS '96, 6-10 October, San Diego,California, Vol.4, 2547-2554.

Kumar, N and Raman, KS and Sastry, DH and Little, EA (1990) Investigation of superplasticity by the impression creep technique. In: Journal of Materials Science, 25 (1). pp. 753-755.

Kumar, NVR and Dwarakadasa, ES (2000) Effect of matrix strength on the mechanical properties of Al-Zn-Mg/SiCp composites. In: Composites Part A: Applied Science and Manufacturing, 31 (10). pp. 1139-1145.

Kumar, NVR and Pai, BC and Dwarakadasa, ES (2003) Microstructural evolution in liquid metal processed Al-alloy/SiCp composites. In: International Journal of Cast Metals Research, 15 (6). pp. 573-579.

Kumar, P and Mishra, A and Watt, T and Watt, I and Bourell, DL and Sahaym, U (2013) Electromagnetic jigsaw: metal-cutting by combining electromagnetic and mechanical Forces. In: PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 6 . pp. 600-604.

Kumar, P and Talenbanpour, B and Sahaym, U and Wen, CH and Dutta, I (2012) Microstructural Evolution and Some Unusual Effects During Thermo-Mechanical Cycling of Sn-Ag-Cu Alloys. In: 13th IEEE InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) , MAY 30-JUN 01, 2012 , San Diego, CA , pp. 880-887.

Kumar, PV and Gupta, GS (2002) Study of formation of silicon carbide in the Acheson process. In: Steel Research, 73 (2). pp. 31-38.

Kumar, Pankaj and Gurao, Nilesh P and Haldar, Arunansu and Suwas, Satyam (2012) Texture and Microstructural Evolution in Pearlitic Steel During Triaxial Compression. In: Metallurgical and Materials Transactions A, 43A (6). pp. 2043-2055.

Kumar, Prajwal and Joseph, Alex and Ramamurthy, Praveen C and Subramanian, Sankaran (2012) Lead ion sensor with electrodes modified by imidazole-functionalized polyaniline. In: MICROCHIMICA ACTA, 177 (3-4). pp. 317-323.

Kumar, Prajwal and Ranjith, K and Gupta, Satyajit and Ramamurthy, Praveen C (2011) Electrochemical copolymerization of thiophene derivatives; a precursor to photovoltaic devices. In: Electrochimica Acta, 56 (24). pp. 8184-8191.

Kumar, Prajwal and Roy, Aashis S and Ramamurthy, Praveen C (2014) The design of polyaniline based sensor for the qualitative estimation of malonaldehyde. In: MEASUREMENT, 47 . pp. 1-4.

Kumar, Prajwal and Saravanan, S and Ranjith, K and Ramamurthy, Praveen C (2014) D-A-D-structured conducting polymer-modified electrodes for detection of lead(II) ions in water. In: JOURNAL OF APPLIED ELECTROCHEMISTRY, 44 (1). pp. 133-139.

Kumar, Prashant and Kiran, MSRN (2010) Nanomechanical Characterization of Indium Nano/Microwires. In: Nanoscale Res Lett, 5 (7). pp. 1085-1092.

Kumar, Prashant and Kiran, MSRN (2010) Nanomechanical properties of silicon surfaces nanostructured by excimer laser. In: Science and Technology of Advanced Materials, 11 (2).

Kumar, Praveen and Dutta, Indranath (2013) Effect of substrate surface on electromigration-induced sliding at hetero-interfaces. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 46 (15).

Kumar, Punith MK and Srivastava, Chandan (2013) Morphological and electrochemical characterization of electrodeposited Zn-Ag nanoparticle composite coatings. In: MATERIALS CHARACTERIZATION, 85 . pp. 82-91.

Kumar, RK and Sinha, SK and Lahiri, AK (1997) Modeling of the cooling process on the runout table of a hot strip mill - A parallel approach. In: IEEE Transactions on Industry Applications, 33 (3). pp. 807-814.

Kumar, Ravi NV and Dwarakadasa, ES (2000) Effect of matrix strength on the mechanical properties of Al–Zn–Mg/SiCP composites. In: Composites Part A: Applied Science and Manufacturing, 31 (10). pp. 1139-1145.

Kumar, Ravi NV and Dwarakadasa, ES (1994) Fracture behaviour of $Al-Zn-Mg/SiC_p$ composites. In: Journal of Materials Science, 29 (6). pp. 1533-1539.

Kumar, S and Ingole, S and Dieringa, H and Kainer, KU (2003) Thermal cycling of Mg-MMCs. In: Materials Science Forum, 426-4 . pp. 2119-2124.

Kumar, S and Shabadi, R and Patel, MM (2003) Influence of precipitation on serrated flow in Al – 5Zn–1Mg alloy. In: Materials Science and Technology, 19 (10). pp. 1344-1348.

Kumar, Sampath TS and Hegde, MS (1986) Electron Spectroscopic Study of Surface Segregation and Oxidation of Cu-In and Cu-Au Alloys. In: Applied Surface Science, 26 (2). pp. 219-229.

Kumar, Sampath TS and Mallya, RM and Hegde, MS (1988) Surface segregation and oxidation studies on Cu-Ni-Sn and Ag-Cu-Ge ternary alloys. In: Applied Surface Science, 35 (1). pp. 63-75.

Kumar, Sandeep and Jayaram, Vikram and Mani, TV and Warrier, KGK (1997) Degradation of Al2O3-�SiC-Al composites prepared by the oxidative growth of Al-alloys into SiC particulate. In: Journal of Materials Science, 32 (17). pp. 4719-4722.

Kumar, Subodh and Dieringa, Hajo and Kainer, Karl-Ulrich (2005) Effect of particulate content on the thermal cycling behavior of the magnesium alloy based hybrid composites. In: Composites, Part A: Applied Science and Manufacturing, 36 (3). pp. 321-325.

Kumar, Subodh and Ingole, Sudeep and Dieringa, Hajo and Kainer, Karl U (2003) Analysis of thermal cycling curves of short fibre reinforced Mg-MMCs. In: Composites Science and Technology, 63 (12). pp. 1805-1814.

Kumar, Subodh and Mondal, Ashok Kumar and Dieringa, Hajo and Kainer, Karl-Ulrich (2004) Analysing hysteresis and residual strains in thermal cycling curves of short fibre reinforced Mg-MMCs. In: Composites Science and Technology, 64 (9). pp. 1179-1189.

Kumar, Sudheer P and Ramachandra, S and Ramamurty, U (2003) Effect of displacement-rate on the indentation behavior of an aluminum foam. In: Materials Science and Engineering A, 347 (1-2). pp. 330-337.

Kumar, Suresh K and Phanikumar, G and Dutta, P and Chattopadhyay, K (2002) Microstructural development of dissimilar weldments: case of MIG welding of Cu with Fe filler. In: Journal of Materials Science, 37 (11). pp. 2345-2349.

Kumar, TS Sampath and Hegde, MS (1985) Surface segregation and oxidation studies of Cu-Sn and Cu-Pd alloys by x-ray photoelectron and auger spectroscopy. In: Applications of Surface Science, 20 (3). pp. 290-306.

Kumar, TS Sampath and Hegde, MS (1985) XPS and XAES studies of surface segregation and oxidation of Cu-Ge alloy. In: Surface Science Letters, 150 (2). L123-L129.

Kumar, Udaya K and Gundappa, Pradeep and Bai, Pramila BN and Natarajan, KA and Biswas, SK (1989) Laboratory studies on the wear of grinding media. In: Tribology International, 22 (3). pp. 219-225.

Kumari, A and Natarajan, KA (2002) Cathodic reductive dissolution and surface adsorption behavior of ocean manganese nodules. In: Hydrometallurgy, 64 (3). pp. 247-255.

Kumari, A and Natarajan, KA (2002) Electrochemical aspects of leaching of ocean nodules in the presence and absence of microorganisms. In: International Journal of Mineral Processing, 66 (1-4). pp. 29-47.

Kumari, A and Natarajan, KA (2002) Electrochemical processing of ocean manganese nodules with microbial enhancement to recover valuable metals. In: Minerals and Metallurgical Processing, 19 (3). pp. 137-147.

Kumari, A and Natarajan, KA (2001) Electroleaching of polymetallic ocean nodules to recover copper, nickel and cobalt. In: Minerals Engineering, 14 (18). pp. 877-886.

Kumari, Abha and Natarajan, KA (2002) Development of a clean bioelectrochemical process for leaching of ocean manganese nodules. In: Minerals Engineering, 15 (1-2). pp. 103-106.

Kumari, Abha and Natarajan, KA (2001) Electrobioleaching of polymetallic ocean nodules. In: Hydrometallurgy, 62 (2). pp. 125-134.

Kurapati, Rajendra and Raichur, Ashok M (2013) Composite cyclodextrin-calcium carbonate porous microparticles and modified multilayer capsules: novel carriers for encapsulation of hydrophobic drugs. In: Journal of Materials Chemistry B , 1 (25). pp. 3175-3184.

Kurapati, Rajendra and Raichur, Ashok M (2012) Graphene oxide based multilayer capsules with unique permeability properties: facile encapsulation of multiple drugs. In: CHEMICAL COMMUNICATIONS, 48 (48). pp. 6013-6015.

Kurapati, Rajendra and Raichur, Ashok M (2013) Near-infrared light-responsive graphene oxide composite multilayer capsules: a novel route for remote controlled drug delivery. In: CHEMICAL COMMUNICATIONS, 49 (7). pp. 734-736.

Kurny, ASW and Rao, Mohan M and Mallya, RM (1986) Design and construction of a laboratory model ion-nitriding unit. In: Indian Journal of Technology, 24 (10). pp. 671-675.

Kurny, ASW and Mallya, RM and Rao, M Mohan (1986) A study on the nature of the compound layer formed during the ion nitriding of En40B steel. In: Materials Science and Engineering, 78 (1). pp. 95-100.

Kurny, ASW and Mallya, RM and Rao, Mohan M (1988) On the Formation of Austenite during Ion Nitriding of Armco Iron. In: Journal of the Less Common Metals, 144 (2). pp. 201-207.

Kutty, TRG and Ganguly, C and Jayadevan, NC and Sastry, DH (1996) Role of zirconium addition on stability of UAl3 phase in Al-U system. In: Journal of Nuclear Materials, 230 (3). pp. 295-301.

Kutty, TRG and Ganguly, C and Sastry, DH (1996) Development of creep curves from hot indentation hardness data. In: Scripta Materialia, 34 (12). pp. 1833-1838.

Kutty, TRG and Ganguly, C and Sastry, DH (1995) Thermal expansion of A1-U and A1-U-Zr alloys. In: Journal of Nuclear Materials, 226 (1-2). pp. 197-205.

Kutty, TRN and Philip, Sam (1995) Low voltage varistors based on $SrTiO_3$ ceramics. In: Materials Science and Engineering B, 33 (2-3). pp. 58-66.

Kutty, TRN and Vivekanandan, R and Murugaraj, P (1988) Precipitation of rutile and anatase (Tio12) fine powders and their conversion to MTiO3 (M = Ba, Sr, Ca) by the hydrothermal method. In: Materials Chemistry and Physics, 19 (6). pp. 533-546.

L

Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (2000) Microstructural evaluation and creep deformation and rupture behavior of 9Cr-1Mo steel base metal, weld metal and weld joint. In: Workshop on Creep, Fatigue and Creep-Fatigue Interaction, JAN 20-22, 1999, Indira Gandhi Centre Atomic Research, Kalpakkam, India, pp. 217-221.

Laha, K and Chandravathi, KS and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (2001) An assessment of creep deformation and fracture behavior of 2.25Cr-1Mo similar and dissimilar weld joints. In: Metallurgical and Materials Transactions A, 32 (1). pp. 115-124.

Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (1999) Tensile flow behaviour of 2.25Cr-1Mo ferritic steel base metal and simulated heat affected zone structures of 2.25Cr-1Mo weld joint. In: Zeitschrift für Metallkunde, 90 (6). 449-455 .

Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (2001) An assessment of creep deformation and fracture behavior of 2.25Cr-1Mo. In: Metallurgical and Materials Transactions A, 32 (1). pp. 115-124.

Laha, K and Latha, S and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (2001) Comparison of creep behaviour of 2.25Cr-1Mo/9Cr - 1Mo dissimilar weld joint with its base and weld metals. In: Materials Science and Technology, 17 (10). pp. 1265-1272.

Lahiri, AK and Yogambha, R and Dayal, Pranesh and Seetharaman, S (2003) Foam in iron and steelmaking. In: High Temperature Materials and Processes, 22 (5-6). pp. 345-351.

Lahiri, AK (1971) Free energy of mixing of divalent basic oxides with silica. In: Transactions of the Faraday Society, 67 (586). pp. 2952-2960.

Lahiri, AK (1979) Multicomponent multiphase equilibria. In: Fluid Phase Equilibria, 3 (2-3). pp. 113-121.

Lahiri, AK (1980) The effect of particle size distribution on TG. In: Thermochimica Acta, 40 (2). pp. 289-295.

Lahiri, AK and Ray, HS (1982) Effect of experimental parameters on non-isothermal TG. In: Thermochimica Acta, 55 (1). pp. 97-111.

Lahiri, AK and Seetharaman, S (2002) Foaming behavior of slags. In: Metallurgical and Materials Transactions B, 33 (3). pp. 499-502.

Lakkakula, Jaya and Krause, Rui Werner Macedo and Ndinteh, Derek Tantoh and Vijaylakshmi, SP and Raichur, Ashok M (2012) Detailed investigation of a gamma-cyclodextrin inclusion complex with L-thyroxine for improved pharmaceutical formulations. In: JOURNAL OF INCLUSION PHENOMENA AND MACROCYCLIC CHEMISTRY, 74 (1-4). pp. 397-405.

Lakshmikumar, ST and Padaki, VC and Krishnapur, PP and Subramanyam, SV and Mallya, RM and Gopal, ESR (1982) Ultrasonic velocities and thermal expansion coefficients of amorphous Se80Te20 and Se90Te10 alloys near glass transitions. In: Journal of Materials Science, 17 (1). pp. 183-192.

Lakshmikumar, ST and Padaki, VC and Krishnapur, PP and Subramanyam, SV and Mallya, RM and Gopal, ESR (1982) Ultrasonic velocities and thermal expansion coefficients of amorphous Se80Te20 and Se90Te10 alloys near glass transitions. In: Journal of Materials Science, 17 (1). pp. 183-192.

Lalitha, K and Das, Shamiparna and Kalyani, Ajay Kumar and Garg, Rohini and Ranjan, Rajeev (2012) Nucleation-Growth Mode of Cubic-Tetragonal Transition with Coexistence of Phases over a Wide Temperature Interval in the High Temperature Ferroelectric Systems PbTiO3-BiMeO3:Me = Sc , and Zn1/2Ti1/2. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 95 (8, SI). pp. 2635-2639.

Lalitha, KV and Fitch, Andy N and Ranjan, Rajeev (2013) Correlation between enhanced lattice polarizability and high piezoelectric response in BiScO3-PbTiO3. In: PHYSICAL REVIEW B, 87 (6).

Laurila, T and Karppinen, J and Vuorinen, V and Li, J and Paul, A and Paulasto-Krockel, M (2012) Effect of isothermal aging and electromigration on the microstructural evolution of solder interconnections during thermomechanical loading. In: Journal of Electronic Materials, 41 (11). pp. 3179-3195.

Laurila, T and Karppinen, J and Vuorinen, V and Paul, A and Paulasto-Krockel, M (2011) Effect of Constant and Cyclic Current Stressing on the Evolution of Intermetallic Compound Layers. In: Journal of Electronic Materials, 40 (7). pp. 1517-1526.

Lee, JY and Han, KH and Park, JM and Chattopadhyay, K and Kim, WT and Kim, DH (2006) Deformation and evolution of shear bands under compressive loading in bulk metallic glasses. In: Acta Materialia, 54 (19). pp. 5271-5279.

Li, K and Jacob, KT and Kale, GM (2010) La-Doped Ba2In2O5 Electrolyte: Pechini Synthesis, Microstructure, Electrical Conductivity, and Application for CO Gas Sensing. In: Journal of the Electrochemical Society, 157 (8). J285-J292.

Li, Wei and Barton, Phillip T and Kiran, MSRN and Burwood, Ryan P and Ramamurty, U and Cheetham, Anthony K (2011) Magnetic and Mechanical Anisotropy in a Manganese 2-Methylsuccinate Framework Structure. In: Chemistry - A European Journal, 17 (44). pp. 12429-12436.

Little, EA and Sastrya, DH and Vasu, KI (1973) Thermal activation parameters for low temperature deformation of alpha-hafnium. In: Scripta Metallurgica, 7 (2). 131 -135.

Lollchund, MR and Gupta, GS and Mulley, NK (2009) Study of gas-fines in decreasing gas velocity in a packed bed. In: In: Engineering Our Future: Are We up to the Challenge, 27-30 September 2009, Perth, Australia.

Lord, Eric A and Ranganathan, S and Subramaniam, Anandh (2002) Stacking Sequences and Symmetry Properties of Trigonal Vacancy-ordered Phases ($\tau$ phases). In: Philosophical Magazine A, 82 (2). pp. 255-268.

Lord, EA and Ramakrishnan, K and Ranganathan, S (2000) An algorithm for generating quasiperiodic patterns and their approximants. In: Bulletin of Materials Science, 23 (2). pp. 119-123.

Lord, EA and Ranganathan, S (2001) Sphere packing, helices and the polytope {3,3,5}. In: European Physical Journal D, 15 (3). pp. 335-343.

Lord, EA and Ranganathan, S (2004) The γ-brass structure and the Boerdijk–Coxeter helix. In: 8th International Conference on Quasicrystals, SEP 08-13, 2002, Bangalore, INDIA.

Lord, EA and Ranganathan, S (2004) The \gamma-brass structure and the Boerdijk–Coxeter helix. In: Journal of Non-Crystalline Solids, 334-33 . pp. 121-125.

Lord, EA and Ranganathan, S and Kulkarni, UD (2001) Quasicrystals: tiling versus clustering. In: Philosophical Magazine A-Physics Of Condensed Matter Structure Defects And Mechanical Properties, 81 (11). pp. 2645-2651.

Lord, EA and Ranganathan, S and Kulkarni, UD (2000) Tilings, coverings, clusters and quasicrystals. In: Current Science, 78 (1). pp. 64-72.

Lord, Eric A (2002) Helical structures: The geometry of protein helices and nanotubes. In: Structural Chemistry, 13 (3-4). pp. 305-314.

Lord, Eric A (2003) Indexing schemes for quasilattices. In: Philosophical Magazine, 83 (29). pp. 3283-3307.

Lord, Eric A (1997) Triply-periodic balance surfaces. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 130 . pp. 279-295.

Louzguine, DV and Ko, MS and Ranganathan, S and Inoue, A (2001) Nanocrystallization of the $Fd_3m$ $Ti_2Ni$-Type Phase in Hf-Based Metallic Glasses. In: Journal of Nanoscience and Nanotechnology, 1 (2). pp. 185-190.

Lyman, Charles E and Newbury, Dale E and Goldstein, Joseph I and Williams, David B and Romig, Alton D and Armstrong, John T and Echlin, Patrick and Fiori, Charles E and Joy, David C and Lifshin, Eric and Peters, Klaus-Ruediger (1993) Scanning Electron Microscopy, X-Ray Microanalysis and Analytical Electron Microscopy. In: Journal of the Electrochemical Society of India, 42 (4). pp. 262-263.

M

Madhavan, R and Gurao, NP and Suwas, Satyam (2012) Deformation and Recrystallization texture evolution in Nano-crystalline Nickel. In: 4th International Conference on Recrystallization and Grain Growth (ReX & GG 2010), JUL 04-09, 2010, Sheffield, ENGLAND, pp. 508-517.

Mahato, Anirban and Perry, Thomas A and Jayaram, Vikram and Biswas, SK (2010) Pressure and thermally induced stages of wear in dry sliding of a steel ball against an aluminium-silicon alloy flat. In: Wear, 268 (9-10). pp. 1080-1090.

Mahato, Anirban and Verma, Nisha and Jayaram, Vikram and Biswas, SK (2011) Severe wear of a near eutectic aluminium-silicon alloy. In: Acta Materialia, 59 (15). pp. 6069-6082.

Mahlambi, Mphilisi M and Mishra, Ajay K and Mishra, Shivani B and Krause, Rui W and Mamba, Bhekie B and Raichur, Ashok M (2012) Comparison of rhodamine B degradation under UV irradiation by two phases of titania nano-photocatalyst. In: JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 110 (2). pp. 847-855.

Mahlambi, Mphilisi M and Mishra, Ajay K and Mishra, Shivani B and Krause, Rui W and Mamba, Bhekie B and Raichur, Ashok M (2013) Effect of Metal Ions (Ag, Co, Ni, and Pd) on the Visible Light Degradation of Rhodamine B by Carbon-Covered Alumina-Supported TiO2 in Aqueous Solutions. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 52 (5). pp. 1783-1794.

Mahlambi, Mphilisi M and Mishra, Ajay K and Mishra, Shivani B and Krause, Rui W and Mamba, Bhekie B and Raichur, Ashok M (2013) Metal doped nanosized titania used for the photocatalytic degradation of rhodamine B dye under visible-light. In: Journal of Nanoscience and Nanotechnology, 13 (7). pp. 4934-4942.

Mahlambi, Mphilisi M and Mishra, Ajay K and Mishra, Shivani B and Krause, Rui W and Mamba, Bhekie B and Raichur, Ashok M (2012) Synthesis and characterization of carbon-covered alumina (CCA) supported TiO2 nanocatalysts with enhanced visible light photodegradation of Rhodamine B. In: Journal of Nanoparticle Research, 14 (4).

Mahlambi, Mphilisi M and Mishra, Ajay K and Mishra, Shivani B and Raichur, Ashok M and Mamba, Bhekie B and Krause, Rui W (2012) Layer-by-Layer Self-Assembled Metal-Ion- (Ag-, Co-, Ni-, and Pd-) Doped TiO2 Nanoparticles: Synthesis, Characterisation, and Visible Light Degradation of Rhodamine B. In: JOURNAL OF NANOMATERIALS, 2012 .

Maitra, Urmimala and Prasad, K Eswar and Ramamurty, U and Rao, CNR (2009) Mechanical properties of nanodiamond-reinforced polymer-matrix composites. In: Solid State Communications, 149 (39-40). pp. 1693-1697.

Majumdar, B and Chattopadhyay, K (2000) Aligned Monotectic Growth in Unidirectionally Solidified Zn-Bi Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A, 31 (7). pp. 1833-1842.

Majumdar, B and Chattopadhyay, K (1996) The rayleigh instability and the origin of rows of droplets in the monotectic microstructure of zinc-bismuth alloys. In: Metallurgical and Materials Transactions A, 27 (7). pp. 2053-2057.

Majumdar, B and Goswami, R and Chattopadhyay, K (1995) Monotectic microstructure in a Zn-0.6at% Bi alloy at near equilibrium and nonequilibrium situation. In: Non Linear Phenomena in Materials Science III. Instabilities and Patterning. Indo-French Workshop on Instabilities and Patterning and of the International Meeting on Non Linear Phenomena in Materials Science, Dec. 1994, Switzerland, pp. 11-18.

Majumdar, B and Raja, Manivel M and Narayanasamy, A and Chattopadhyay, K (1997) Structural and magnetic investigations on the metastable phases of the mechanically alloyed Fe-Cu system. In: Journal of Alloys and Compounds, 248 (1-2). pp. 192-200.

Mallik, Awadesh K and Shivashankar, SA and Biswas, SK (2009) High vacuum tribology of polycrystalline diamond coatings. In: Sadhana, 34 (5). pp. 811-821.

Mallik, RC and Anbalagan, R and Rogl, G and Royanian, E and Heinrich, P and Bauer, E and Rogl, P and Suwas, S (2013) Thermoelectric properties of Fe(0.2)Co(3.8)Sbi(12-x)Te(x) skutterudites. In: ACTA MATERIALIA, 61 (18). pp. 6698-6711.

Mallya, Ashwini N and Kumar, Yashavanth GS and Ranjan, Rajeev and Ramamurthy, Praveen C (2012) Dielectric relaxations above room temperature in DMPU derived polyaniline film. In: PHYSICA B-CONDENSED MATTER, 407 (18). pp. 3828-3832.

Mandal, RK and Sastry, GVS and Lele, S and Ranganathan, S (1991) Irrational twins in melt spun Al-Mn-Fe-Si alloy. In: Scripta Metallurgica et Materialia, 25 (6). pp. 1477-1482.

Mandre, NR and Natarajan, KA (1987) Environmental aspects of bacterial oxidation with respect to the mining and processing of some sulfide minerals. In: Transactions of the Indian Institute of Metals, 40 (2). pp. 128-136.

Mandre, NR and Natarajan, KA (1987) Selective flocculation of sulfides with reference to environmental control. In: Transactions of Indian Institute of Metals, 40 (5). pp. 373-381.

Manimunda, P and Filleter, T and Egberts, P and Jayaram, V and Biswas, SK and Bennewitz, R (2009) Nano-meter scale plasticity in KBr studied by nanoindenter and force microscopy. In: Symposium on Probing Mechanics at Nanoscale Dimensions held at the 2009 MRS Spring Meeting, APR 14-17, 2009, San Francisco, CA, pp. 81-86.

Manivel, Raja M and Chattopadhyay, K and Majumdar, B and Narayanasamy, A (2000) Structure and soft magnetic properties of Finemet alloys. In: Journal of Alloys and Compounds, 297 (1-2). pp. 199-205.

Manjunatha, C and Sunitha, DV and Nagabhushana, H and Sharma, SC and Ashoka, S and Rao, JL and Nagabhushana, BM and Chakradhar, RPS (2012) Structural characterization, EPR and thermoluminescence properties of Cd-1 (-) xNixSiO3 nanocrystalline phosphors. In: MATERIALS RESEARCH BULLETIN, 47 (9). pp. 2306-2314.

Manna, R and Sarkar, J and Surappa, MK (1996) Effect of second phase precipitates on recovery and recrystallization behaviour of cold-worked AI2024-SiCp composites. In: Journal of Materials Science, 31 (6). pp. 1625-1631.

Manoharan, SS and Vasanthacharya, NY and Hegde, MS and Satyalakshmi, KM and Prasad, V and Subramanyam, SV (1994) Ferromagnetic La0.6Pb0.4MnO3 thin films with giant magnetoresistance at 300 K. In: Journal of applied physics, 76 (6). 3923-3925 .

Manoharan, Sundar S and Hegde, MS and Satyalakshmi, KM and Prasad, V and Subramanyam, SV (1996) Metal-insulator transition and giant magnetoresistance in La1-xMnO3-delta thin films and superlattices. In: Symposium E on Structure and Properties of Metallic Thin Films and Multilayers, at the Spring Meeting of the European-Materials-Research-Society, MAY 22-26, 1995, STRASBOURG, FRANCE.

Manoharan, Sundar S and Kumar, Dhananjay and Hegde, MS and Satyalakshmi, KM and Prasad, V and Subramanyam, SV (1995) Giant Magnetoresistance in Self-Doped $La{1_x}MnO_{3-\delta}$ Thin Films. In: Journal of Solid State Chemistry, 117 (2). pp. 420-423.

Manoharan, Sundar S and Satyalakshmi, KM and Prasad, V and Suibramanyam, SV and Hegde, MS (1995) Enhanced giant magnetoresistance in magnetic/nonmagnetic LaMno3 oxide multilayers. In: Current Science (Bangalore), 69 (4). 356-358 .

Manoharan, Sundar S and Vasanthacharya, NY and Hegde, MS and Satyalakshmi, KM and Prasad, V and Subramanyam, SV (1994) Ferromagnetic $La_{0.6}Pb_{0.4}Mn0_3$ thin films with giant magnetoresistance at 300 K. In: Journal of Applied Physics, 76 (6). pp. 3923-3925.

Mantha, D and Hajrad, JP (2001) Thermodynamics of surfaces and adsorption in the Fe-O and Fe-O-N systems at 1823 K. In: Metallurgical and Materials Transactions B, 32 (3). pp. 423-427.

Marikar, YMF and Vasu, KI (1970) Fluoroborate bath for the plating of iron, cobalt, and nickel. In: Metals and Minerals Review, 9 (2). pp. 5-16.

Maruoka, N and Lazuardi, F and Maeyama, T and Nogami, Hiroshi and Kitamura, S and Gupta, GS (2008) Influence of bottom stirring conditions on surface reaction rate. In: SCANMET III, Sweden Lulea, 8-11 June, 2008, p449-458, 8-11 June, 2008, Sweden Lulea.

Maruoka, Nobuhiro and Lazuardi, Felicia and Nogami, Hiroshi and Gupta, Govind Sharan and Kitamura, Shin-ya (2010) Effect of Bottom Bubbling Conditions on Surface Reaction Rate in Oxygen-Water System. In: ISIJ International, 50 (1). pp. 89-94.

Math, S and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part II. Prediction of failure modes in a thin TiN film deposited on a compliant elastic substrate. In: Journal of Materials Research, 21 (3). pp. 783-790.

Math, Souvik and Horn, Roger and Jayaram, Vikram and Biswas, Sanjay K (2007) A general contact mechanical formulation of multilayered structures and its application to deconvolute thickness/mechanical properties of glue used in surface force apparatus. In: Journal of Colloid and Interface Science, 308 (2). pp. 551-561.

Math, Souvik and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part 1. Experimental validation of stresses and strains derived using Hankel transform technique in an elastic film/substrate system. In: Journal of Materials Research, 21 (3). pp. 774-782.

Math, Souvik and Suresha, SJ and Jayaram, V and Biswas, SK (2006) Indentation of a hard film on a compliant substrate: film fracture mechanisms to accommodate substrate plasticity. In: Journal of Materials Science, 41 (23). pp. 7830-7837.

Matheswaran, M and Padmanabhan, K and Kishore, * (1995) Static and impact behaviour of thermoplastic modified glass fabric/epoxy composites. In: Journal of Materials Science Letters, 14 (13). pp. 951-954.

Mathew, Mary (2011) From polarization to convergence: need to mend the broken patent system. In: Current Science (Bangalore), 101 (3). pp. 279-285.

Mathews, T and Jacob, KT (1994) Phase relations in the system Cu─Ho─O and stability of Cu2Ho2O5. In: Journal of the American Ceramic Society, 77 (1). 133-136 .

Mathews, Tom and Hajra, JP and Jacob, KT (1993) Phase relations and thermodynamic properties of condensed phases in the system calcium-copper-oxygen. In: Chemistry of Materials, 5 (11). 1669-1675 .

Mathews, Tom and Jacob, KT (1993) Decomposition Temperatures of $Cu_2Ln_2O_5$ (Ln=Tb, Dy, Ho, Er, Tm, Yb, and Lu) Compounds. In: Journal of Materials Research, 8 (12). pp. 3015-3018.

Mathews, Tom and Jacob, KT (1993) Decomposition temperatures of Cu2Ln2O5 (Ln = Tb, Dy, Ho, Er, Tm, Yb, and Lu) compounds. In: Journal of Materials Research, 8 (12). pp. 3015-3018.

Mathews, Tom and Jacob, KT (1990) Equilibrium oxygen potential for the decomposition of $YBa_2Cu_4O_8$. In: Applied Physics Letters, 57 (5). pp. 511-513.

Mathews, Tom and Jacob, KT (1992) Seebeck Coefficient of Magnetite: A Reinterpretation Invoking Jahn-Teller Entropy. In: Solid State Communications, 84 (10). pp. 975-978.

Mathews, Tom and Jacob, KT (1992) Variation of the partial thermodynamic properties of oxygen with composition in $YBa_2Cu_3O_{7-\delta}$. In: Metallurgical and Materials Transactions A, 23 (12). pp. 3325-3335.

Mathews, Tom and Jacob, KT (1992) Variation of the partial thermodynamic properties of oxygen with composition in YBa2Cu3O7−δ. In: Metallurgical and Materials Transactions A, 23A (12). pp. 3325-3335.

Mathews, Tom and Jacob, KT and Hajra, JP (1990) Electrical transport in magnesium aluminate. In: Bulletin of Materials Science, 13 (4). pp. 293-300.

Mathews , Tom and Jacob, Thomas K (1993) Phase relations in the systems Cu–O–R2O3(R = Tm, Lu) and Gibbs energies of formation of Cu2R2O5 compounds. In: Journal of Materials Chemistry, 3 (10). pp. 1025-1029.

Matsubara, E and Waseda, Y and Jacob, KT (1991) Structural study of YBa2Cu3O7 x thin films using the grazing incidence X ray scattering method. In: Journal of Materials Science Letters, 10 (12). pp. 677-681.

Matsubara, E and Waseda, Y and Jacob, KT (1991) Structural study of YBa2Cu3O7?x thin filsm using the grazing incidence X-ray scattering method. In: Journal of Materials Science Letters, 10 (12). pp. 677-681.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Effect Of Directionality Of Grinding Marks On Friction And Formation Of Transfer Layer. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa, Israel., pp. 307-314.

Menezes, PL and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer: role of surface texture. In: Tribology Letters, 24 (3). pp. 265-273.

Menezes, Pradeep L and *, Kishore and Kailas, Satish V (2009) Role of surface texture of harder surface on subsurface deformation. In: Wear, 266 (1-2). pp. 103-109.

Menezes, Pradeep L and *, Kishore and Kailas, Satish V (2009) Studies on friction and formation of transfer layer when Al-4Mg alloy pins slid at various numbers of cycles on steel plates of different surface texture. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 525-534.

Menezes, Pradeep L and Kailas, Satish V (2009) Study of Friction and Transfer Layer Formation in Copper-Steel Tribo-System: Role of Surface Texture and Roughness Parameters. In: Tribology Transactions, 52 (5). pp. 611-622.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Effect of directionality of unidirectional grinding marks on friction and transfer layer formation of Mg on steel using inclined scratch test. In: Materials Science and Engineering A, 429 (1-2). pp. 149-160.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Effect of surface roughness parameters and surface texture on friction and transfer layer formation in tin-steel tribo-system. In: Journal of Materials Processing Technology, 208 (1-3). pp. 372-382.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2010) Influence of Die Surface Textures during Metal Forming-A Study Using Experiments and Simulation. In: Materials and Manufacturing Processes, 25 (9). pp. 1030-1039.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of inclination angle of plate on friction, stick-slip and transfer layer-A study of magnesium pin sliding against steel plate. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 476-484.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of roughness parameters and surface texture on friction during sliding of pure lead over 080 M40 steel. In: International Journal of Advanced Manufacturing Technology, 43 (7-8). pp. 731-743.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Influence of roughness parameters on coefficient of friction under lubricated conditions. In: Sadhana : Academy Proceedings in Engineering Sciences, 33 (3). pp. 181-190.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Influence of surface texture on coefficient of friction and transfer layer formation during sliding of pure magnesium pin on 080 M40 (EN8) steel plate. In: Wear, 261 (5-6). pp. 578-591.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) On the effect of surface texture on friction and transfer layer formation-A study using Al and steel pair. In: Wear, 265 (11-12). pp. 1655-1669.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2007) Response of Materials during sliding on various surface textures. In: ASME/STLE 2007 International Joint Tribology Conference (IJTC2007) , October 22–24, 2007, San Diego, California.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Studies On Friction And Formation Of Transfer Layer In Hcp Metals. In: Journal of Tribology, 131 (1). 031604 -031613.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer using inclined scratch. In: Tribology International, 39 (2). pp. 175-183.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Subsurface deformation and the role of surface texture—A study with Cu pins and steel plates. In: Sadhana : Academy Proceedings in Engineering Sciences, 33 (3). pp. 191-201.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2012) Analysis of Strain Rates and Microstructural Evaluation during Metal Forming: Role of Surface Texture and Friction. In: TRIBOLOGY TRANSACTIONS, 55 (5). pp. 582-589.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2012) Factors influencing stick-slip motion: effect of hardness, crystal structure and surface texture. In: ASME/STLE International Joint Tribology Conference, OCT 24-26, 2011, Los Angeles, CA, USA, pp. 71-73.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Friction and transfer layer formation in polymer-steel tribo-system: Role of surface texture and roughness parameters. In: Wear, 271 (9-10, ). pp. 2213-2221.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Influence of Inclination Angle and Machining Direction on Friction and Transfer Layer Formation. In: Journal of Tribology, 133 (1).

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Response of Materials During Sliding on Various Surface Textures. In: Journal of Materials Engineering and Performance, 20 (8). pp. 1438-1446.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) The Role of Strain Rate Response on Tribological Behavior of Metals. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 135 (1).

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Role of Surface Texture, Roughness, and Hardness on Friction During Unidirectional Sliding. In: Tribology Letters, 41 (1). pp. 1-15.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) SELF-ORGANIZATION AND FRICTION DURING SLIDING. In: PROCEEDINGS OF THE ASME/STLE INTERNATIONAL JOINT TRIBOLOGY CONFERENCE . pp. 273-275.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) Tribological response of soft materials sliding against hard surface textures at various numbers of cycles. In: LUBRICATION SCIENCE, 25 (2, SI). pp. 79-99.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) The role of surface texture on friction and transfer layer formation during repeated sliding of Al-4Mg against steel. In: Wear, 271 (9-10, ). pp. 1785-1793.

Menezes, Pradeep L and Kishore, * and Kailas, SatishV and Bobjib, MS (2010) Influence of tilt angle of plate on friction and transfer layer—A study of aluminium pin sliding against steel plate. In: Tribology International, 43 (5-6). 897 -905.

Menezes, Pradeep L and Kishorea, * and Kailas, Satish V (2009) Influence of surface texture and roughness parameters on friction and transfer layer formation during sliding of aluminium pin on steel plate. In: Wear, 267 (9-10). pp. 1534-1549.

Menezes, Pradeep L and Kumar, K and Kishore, R and Kailas, Satish V (2009) Influence of friction during forming processes-a study using a numerical simulation technique. In: The International Journal of Advanced Manufacturing Technology, 40 (11-12). pp. 1067-1076.

Meyers, Marc A and Andrade, Umberto R and Chokshi, Atul H (1995) The effect of grain size on the high-strain, high-strain-rate behavior of copper. In: Metallurgical and Materials Transactions A, 26 (11). pp. 2881-2893.

Miracle, DB and Ranganathan, S and Lord, EA (2007) Atomic size factor criterion in designing Bulk Metallic Glasses. In: Procs. Of Frontiers In The Design Of Materials, , 2007, Chennai, India.

Miracle, Daniel B and Lord, Eric A and Ranganathan, Srinivasa (2006) Candidate Atomic Cluster Configurations in Metallic Glass Structures. In: Materials Transactions, 47 (7). pp. 1737-1742.

Mirajkar, YRK and Natarajan, KA and Somasundaran, P (1997) Growth and attachment of Thiobacillus ferrooxidans during sulfide mineral leaching. In: International Journal Of Mineral Processing, 50 (3). pp. 203-210.

Mishra, Manish Kumar and Varughese, Sunil and Ramamurty, Upadrasta and Desiraju, Gautam R (2013) Odd-even effect in the elastic modulii of alpha,omega-Alkanedicarboxylic acids. In: Journal of the American Chemical Society, 135 (22). pp. 8121-8124.

Mishra, NS and Ranganathan, S (1995) Electron microscopy and diffraction of ordering in Ni---W alloys. In: Acta Metallurgica et Materialia, 43 (6). pp. 2287-2302.

Mishra, NS and Ranganathan, S (1992) Electron microscopy and diffraction of ordering in an off-stoichiometric Ni---W alloy. In: Scripta Metallurgica et Materialia, 27 (10). pp. 1337-1342.

Mishra, RS and Jayaram, V and Majumdar, B and Lesher, CE and Mukherjee, AK (1999) Preparation of a $ZrO_{2}-Al_{2}O_{3}$ nanocomposite by high-pressure sintering of spray-pyrolyzed powders. In: Journal of Materials Research, 14 (3). pp. 834-840.

Mishra, RS and Jayaram, V and Majumdar, B and Lesher, CE and Mukherjee, AK (1999) Preparation of a ZrO2–Al2O3 nanocomposite by high-pressure sintering of spray-pyrolyzed powders. In: Journal of Materials Research, 14 (3). pp. 834-840.

Mishra, Sumeet R and Ranjith, K and Swathi, SK and Ramamurthy, Praveen C (2012) Nanostructured barbed wire architecturing of organic conducting material blends by electrospinning. In: Applied Physics Letters, 100 (1). 013302-1-013302-4.

Misra, Abha and Kumar, Praveen (2013) Periodic architecture for high performance shock absorbing composites. In: Scientific Reports, 3 . 2056_1-2056_.

Misra, RDK and Jacob, KT and Nandy, TK and Saha, RL (1989) Evaluation of the reactivity of titanium with mould materials during casting. In: Bulletin of Materials Science, 12 (5). pp. 481-493.

Modak, JM and Vasan, SS and Natarajan, KA (1999) Calcium removal from bauxite using Paenibacillus polymyxa. In: Minerals & Metallurgical Processing, 16 (4). pp. 6-12.

Modak, Jayant M and Natarajan, KA and Mukhopadhyay, Sanghamitra (1996) Development of temperature-tolerant strains of Thiobacillus ferrooxidans to improve bioleaching kinetics. In: Hydrometallurgy, 42 (01). pp. 51-61.

Mohan, Rengarajan and Kishore, * (1985) Jute-Glass Sandwich Composites. In: Journal of Reinforced Plastics and Composites, 4 (2). pp. 186-194.

Mohan, R and Kishore, * and Shridhar, MK and Rao, RMVGK (1982) Compressive strength of jute-glass hybrid fibre composites. In: Journal of Materials Science Letters, 2 (3). pp. 99-102.

Mohanty, Bani P and Subramanian, S and Hajra, JP (1986) Electro slag refining of commercial aluminum. In: Transactions of the Indian Institute of Metals, 39 (6). pp. 646-647.

Mohapatra, OP and Jacob, KT and Alcock, CB (1973) Solubilities of Pb+2, Bi+3, Sb+3 and Cu+1 sulphides in (NaCl KCl Na2S) melts. In: Metallurgical and Materials Transactions B, 4 (7). pp. 1755-1762.

Mondal, AK and Kumar, Sanjeev (2010) Creep Behaviour of AE42 Magnesium Alloy and Its Composites Using Impression Creep Technique. In: 6th International Conference on Processing and Manufacturing of Advanced Materials, AUG 25-29, 2009, Berlin, pp. 1552-1557.

Mondal, A and Fechner, D and Kumar, S and Dieringa, H and Maier, P and Kainer, KU (2010) Interrupted creep behaviour of Mg alloys developed for powertrain applications. In: Materials Science and Engineering A, 527 (9). pp. 2289-2296.

Mondal, AK and Kumar, S (2009) Dry sliding wear behaviour of magnesium alloy based hybrid composites in the longitudinal direction. In: 17th International Conference on Wear of Materials, JUN 15 2009, Las Vegas, pp. 458-466.

Mondal, AK and Kumar, S (2009) Impression creep behaviour of magnesium alloy-based hybrid composites in the transverse direction. In: Composites Science and Technology, 69 (10, Sp). pp. 1592-1598.

Mondal, Ashok Kumar and Rao, Chandra BSS and Kumar, Subodh (2007) Wear behaviour of AE42+20% saffil Mg-MMC. In: Tribology International, 40 (2). pp. 290-296.

Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2013) Effects of different modes of hot cross-rolling in 7010 aluminum alloy: part I. evolution of microstructure and texture. In: Metallurgical and Materials Transactions A, 44A (6). pp. 2746-2763.

Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2013) Effects of different modes of hot cross-rolling in 7010 aluminum alloy: part II. mechanical properties anisotropy. In: Metallurgical and Materials Transactions A, 44A (6). pp. 2764-2777.

Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2011) Formation of a single, rotated-Brass (1 1 0)< 5 5 6 > texture by hot cross-rolling of an Al-Zn-Mg-Cu-Zr alloy. In: Scripta Materialia, 64 (5). pp. 446-449.

Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2013) Tensile flow and work hardening behavior of hot cross-rolled AA7010 aluminum alloy sheets. In: Materials Science and Engineering: A, 577 . pp. 87-100.

Mondal, MK and Maruoka, N and Kitamura, S and Gupta, GS (2010) Enhancement in Bath Mixing and Plume area in a New Degassing Process - A Computational Fluid Dynamic Study. In: Archives of Metallurgy and Materials, 55 (4). pp. 1131-1135.

Mondal, MK and Maruoka, N and Kitamura, S and Gupta, GS and Nogami, H and Shibata, H (2012) Study of Fluid Flow and Mixing Behaviour of a Vacuum Degasser. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 65 (3). pp. 321-331.

Mondal, S and Gupta, GS (2008) Fluid dynamics study of a new vacuum degassing process. In: CHEMECA-08, Sept. 27-30, New Castle, Australia.

Mukherjee, A and Raichur, AM and Modak, JM and Natarajan, KA (2003) Bio-processing of Indian Ocean nodules using a marine isolate-effect of organics. In: Minerals Engineering, 16 (7). pp. 651-657.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M (2005) Dissolution studies on $TiO_{2}$ with organics. In: Chemosphere, 61 (4). pp. 585-588.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M and Natarajan, KA (2004) Bioprocessing of polymetallic Indian Ocean nodules lusing a marine isolate. In: Hydrometallurgy, 73 (3-4). pp. 205-213.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M and Natarajan, KA (2004) Bioprocessing of polymetallic Indian Ocean nodules using a marine isolate. In: Hydrometallurgy, 73 (3-4). pp. 205-213.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M and Natarajan, KA (2004) Exploring process options to enhance metal dissolution in bioleaching of Indian Ocean nodules. In: Journal of Chemical Technology & Biotechnology, 79 (5). pp. 512-517.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M and Natarajan, KA (2004) Mechanisms for solubilization of cobalt, copper and nickel from Indian Ocean nodules at near neutral pH by a marine isolate. In: Journal of Industrial Microbiology and Biotechnology, 31 (10). pp. 462-468.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M and Natarajan, KA (2004) Mechanisms for solubilization of cobalt,copper and nickel from Indian Ocean nodules at near neutral pH by a marine isolate. In: Journal of Industrial Microbiology and Biotechnology, 31 (10). pp. 462-468.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M and Natarajan, KA (2003) Solubilization of cobalt from ocean nodules at neutral pH—a novel bioprocess. In: Journal of Industrial Microbiology and Biotechnology, 30 (10). pp. 606-612.

Mukherjee, Amitava and Raichur, Ashok M and Natarajan, KA and Modak, Jayant M (2004) Recent Developments in Processing Ocean Manganese Nodules-A Critical Review. In: Mineral Processing and Extractive Metallurgy Review, 25 (2). pp. 91-127.

Mukherjee, Amitava and Raichura, Ashok M and Modak, Jayant M and Natarajan, KA (2005) Dissolution of Cu, Co and Ni from ocean nodules by L-ascorbic acid. In: Chemical Engineering and Processing, 44 (7). pp. 754-759.

Mukherjee, M and Kolluri, M and Garcia-Moreno, F and Banhart, J and Ramamurty, U (2009) Strain hardening during constrained deformation of metal foams - Effect of shear displacement. In: Scripta Materialia, 61 (7). pp. 752-755.

Mukherjee, M and Lahiri, AK (2005) Three-phase contact line profile between a large air bubble and a flat solid surface. In: Journal of Colloid and Interface Science, 291 (2). pp. 593-596.

Mukherjee, M and Ramamurty, U and Garcia-Moreno, F and Banhart, J (2010) The effect of cooling rate on the structure and properties of closed-cell aluminium foams. In: Acta Materialia, 58 (15). pp. 5031-5042.

Mukherjee, R and Abinandanan, TA and Gururajan, MP (2009) Phase field study of precipitate growth: Effect of misfit strain and interface curvature. In: ACTA Materialia, 57 (13). pp. 3947-3954.

Mukherjee, R and Abinandanan, TA and Gururajan, MP (2010) Precipitate growth with composition-dependent diffusivity: Comparison between theory and phase field simulations. In: Scripta Materialia, 62 (2). pp. 85-88.

Mukherjee, Rajdip and Bhowmick, Somnath (2011) Edge Stabilities of Hexagonal Boron Nitride Nanoribbons: A First-Principles Study. In: Journal of Chemical Theory and Computation, 7 (3). pp. 720-724.

Mukherjee, S and Jayaram, V and Biswas, SK (2006) Validation of stresses and stress intensity factor in a notched bilayer system under four point bending, as determined by the solution of the Navier’s equation. In: International Journal of Mechanical Sciences, 48 (11). pp. 1287-1294.

Mukhopadhyay, NK and Ranganathan, S and Chattopadhyay, K (1989) Evolution of superlattice order in Al-Mn quasicrystals and its relation to face-centred icosahedral quasicrystals. In: Philosophical Magazine Letters, 60 (5). pp. 207-211.

Mukhopadhyay, NK and Ranganathan, S and Chattopadhyay, K (1987) On the short-range order in Al-Mn quasicrystals during low-temperature ageing. In: Philosophical Magazine Letters, 56 (4). pp. 121-127.

Mukhopadhyay, NK and Thangaraj, N and Chattopadhyay, K and Ranganathan, S (1987) A comparative electron microscopic study of Al-based and Mg-based quasicrystals. In: Journal of Materials Research, 2 (3). pp. 299-304.

Mukhopadhyay, NK and Chattopadhay, K and Ranganathan, S (1996) Ordering transformation in icosahedral quasicrystals and related crystalline phases. In: Bulletin of Materials Science, 19 (05). pp. 717-723.

Mukhopadhyay, NK and Chattopadhyay, K and Ranganathan, S (1989) Synthesis and structural aspects of quasicrystals in Mg-Al-Ag system: Mg4Al6Ag. In: Metallurgical Transactions. Physical Metallurgy and Material, 20 (5). pp. 805-812.

Mukhopadhyay, NK and Ishihara, KN and Ranganathan, S and Chattopadhyay, K (1991) Rational Approximant Structures and Phason Strain in Icosahedral Quasicrystalline Phases. In: Acta Metallurgica et Materialia, 39 (6). pp. 1151-1159.

Mukhopadhyay, NK and Lord, EA (2002) Least path criterion (LPC) for unique indexing in a two-dimensional decagonal quasilattice. In: Acta Crystallographica Section A, 58 (part 5). pp. 424-428.

Mukhopadhyay, NK and Subbanna, GN and Ranganathan, S and Chattopadhyay, K (1986) An electron microscopic study of quasicrystals in a quaternary alloy : Mg32(Al, Zn, Cu)49. In: Scripta Metallurgica, 20 (4). pp. 525-528.

Mukhopadhyay, P and Biswas, S and Chokshi, AH (2009) Deformation characterization of superplastic AA7475 alloy. In: Transactions of the Indian Institute of Metals, 62 (2). pp. 149-152.

Mukhopadhyay, S and Jacob, KT (1995) Tie lines and activities in the system NiO-MgO-SiO2 at 1373 K. In: Journal of Phase Equilibria, 16 (3). 243-253 .

Mukhopadhyay, Sanghamitra and Natarajan, KA (1995) Growth and development of Thiobacillus ferrooxidans for engineering applications. In: Sadhana : Academy Proceedings in Engineering Sciences, 20 (part 5). 851-869 .

Mukhopadhyay, Sukanya and Jacob, KT (1995) Design of solid electrolytes for use with dissimilar gas electrodes. In: Journal of Electroanalytical Chemistry, 395 (1-2). pp. 107-115.

Mukhopadhyay, Sukanya and Jacob, KT (1995) Phase equilibria in the System $NiO-CaO-SiO_2$ and Gibbs Energy of Formation of $CaNiSi_2O_6$. In: Metallurgical and Materials Transactions A, 26A (9). pp. 2311-2315.

Mukhopadhyay, Sukanya and Jacob, KT (1996) Phase equilibria in the system CaO-CoO-SiO2 and Gibbs energies of formation of the quaternary oxides CaCoSi2O6, Ca2CoSi2O7, and CaCoSiO4. In: American Mineralogist, 81 (7-8). 963-972 .

Mukhopadhyay, Sukanya and Jacob, KT (1995) Phase equilibria in the system NiO-CaO-SiO2 and Gibbs energy of formation of CaNiSi2O6. In: Metallurgical and Materials Transactions A, 26 (9). pp. 2311-2315.

Mukhopadhyay, Sukanya and Jacob, KT (1995) Theoretical Analysis of the Electromotive Force of a Cell Incorporating a Composition Gradient Solid Electrolyte. In: Journal of the Electrochemical Society, 142 (1). pp. 161-165.

Mukhopadhyay, Sukanya and Jacob, KT (1993) Thermodynamic Study of Mixed Anionic Solid Solutions Using Gradient Solid Electrolytes System K2CO3 - K2SO4. In: Journal of the Electrochemical Society, 140 (9). pp. 2629-2635.

Mulley, NK and Gupta, GS (2008) Study of fluid dynamics in a packed bed in the presence of fines and liquid flow. In: Int. Conf. on Recent Progress on Mathematical Modelling in Ironmaking-2008, Tokyo, Japan, Oct. 16-17, 2008, p50-55, Oct. 16-17, 2008, Tokyo, Japan.

Mundotiya, Brij Mohan and Srivastavaz, Chandan (2012) Ag-Ni Nanoparticles: Synthesis and Phase Stability. In: Electrochemical and Solid-State Letters, 15 (5). K41-K44.

Mungole, Tarang and Nadammal, Naresh and Dawra, Kunal and Kumar, Praveen and Kawasaki, Megumi and Langdon, Terence G (2013) Evolution of microhardness and microstructure in a cast Al–7 % Si alloy during high-pressure torsion. In: Journal of Materials Science, 48 (13). pp. 4671-4680.

Mural, Prasanna Kumar S and Madras, Giridhar and Bose, Suryasarathi (2014) Positive temperature coefficient and structural relaxations in selectively localized MWNTs in PE/PEO blends. In: RSC ADVANCES, 4 (10). pp. 4943-4954.

Murali, P and Ramamurty, U (2005) Embrittlement of a bulk metallic glass due to $sub- T_g$ annealing. In: Acta Materialia, 53 (5). pp. 1467-1478.

Murali, P and Ramamurty, U and Shenoy, Vijay B (2008) Factors influencing deformation stability of binary glasses. In: Journal of Chemical Physics, 128 (10). 104508-1-104508-6.

Murali, Pramod and Ranjit, K and Bhat, Navakanta and Banerjee, Gaurab and Amrutur, Bharadwaj and Bhat, KN and Ramamurthy, Praveen C (2012) A CMOS Gas Sensor Array Platform With Fourier Transform Based Impedance Spectroscopy. In: IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS, 59 (11). pp. 2507-2517.

Murali, S and Kashyap, KT and Raman, KS and Murthy, KSS (1993) Inhibition of delayed ageing by trace additions in Al---7Si---0.3Mg cast alloy. In: Scripta Metallurgica et Materialia, 29 (11). 1421-1426 .

Murali, S and Ramachandra, M and Murthy, KSS and Raman, KS (1997) Electropolishing of Al-7Si-0.3Mg Cast Alloy by Using Perchloric and Nitric Acid Electrolytes. In: Materials Characterization, 38 (4-5). pp. 273-286.

Murali, S and Raman, KS and Murthy, KSS (1996) A1-7Si-0.3Mg cast alloy: Formation and crystal structure of beta-FeSiAl5 and (Be-Fe)-BeSiFe2Al8 phases. In: 5th International Conference on Aluminium Alloys - Their Physical and Mechanical Properties (ICAA5), JUL 01-05, 1996, GRENOBLE, FRANCE.

Murali, S and Raman, KS and Murthy, KSS (1992) Effect of magnesium, iron (impurity) and solidification rates on the fracture toughness of Al-7Si-0.3Mg casting alloy. In: Materials Science and Engineering A, 151 (1). pp. 1-10.

Murali, S and Raman, KS and Murthy, KSS (1994) Morphological studies on $\beta-FeSiAI_5$ phase in AI-7Si-0.3Mg alloy with trace sdditions of Be, Mn, Cr, and Co. In: Materials Characterization, 33 (2). pp. 99-112.

Murali, S and Row, Guru TN and Sastry, DH and Raman, KS and Murthy, KSS (1994) Crystal structure of $\beta-FeSiAl_5$ and (Be-Fe)-$BeSiFe_2Al_8$ phases. In: Scripta Metallurgica et Materialia, 31 (3). pp. 267-271.

Murthy, KSN and Dwarakadasa, ES (1993) Corrosion behavior of 8090-T851 alloy in HCl solution containing metal cations. In: Bulletin of Electrochemistry, 9 (8-10). pp. 419-422.

Murthy, KSN and Subramanian, S and Dwarakadasa, ES (1997) Corrosion behaviour of 8090-T851 Al-Li alloy and aluminium in pH 2 solution containing cupric ions. In: British Corrosion Journal, 32 (1). pp. 63-67.

Murthy, VSR and Kishore, * and Seshan, S (1986) Morphology Of Flake, Ductile And Compacted Graphite. In: Journal of Metals, 38 (12). pp. 24-28.

Murthy, GS and Sastry, DH (1981) Impression Creep And High-Temperature Deformation Mechanism In Cadmium. In: Transactions of the Indian Institute of Metals, 34 (3). pp. 195-201.

Murthy, GS and Sastry, DH (1982) Impression creep of zinc and the rate-controlling dislocation mechanism of plastic flow at high temperatures. In: Physica Status Solidi A, 70 (1). pp. 63-71.

Murthy, KSN and Ambat, R and Dwarakadasa, ES (1994) The role of metal cations on the corrosion behaviour of 8090-T851 alloy in pH 2.0 solution. In: Corrosion Science, 36 (10). pp. 1765-1775.

Murthy, KSN and Dwarakadasa, ES (1995) Role of Li+ ions in corrosion behaviour of 8090 Al-Li alloy and aluminium in pH 12 aqueous solutions. In: British Corrosion Journal, 30 (2). 111-115 .

Murthy, VSR and Seshana, S and *, Kishore (1984) Subsurface features of compacted graphite cast iron subjected to wear. In: Wear, 97 (2). pp. 199-202.

Murty, BS and Naik, MD and Rao, Mohan M and Ranganathan, S (1992) Glass forming composition range in the Al-Ti system by mechanical alloying. In: Materials Forum, 16 (1). pp. 19-26.

Murty, BS (1993) Mechanical alloying—a novel synthesis route for amorphous phases. In: Bulletin of Materials Science, 16 (1). pp. 1-17.

Murty, BS and Mohan Rao, M and Ranganathan, S (1990) Synthesis of amorphous phase in Ti---Ni---Cu system by mechanical alloying. In: Scripta Metallurgica et Materialia, 24 (9). pp. 11819-1824.

Murty, BS and Ranganathan, S (1998) Novel materials synthesis by mechanical alloying/milling. In: International Materials Reviews, 43 (3). pp. 101-141.

Murty, BS and Ranganathan, S and Rao, Mohan M (1992) Solid state amorphization in binary Ti---Ni, Ti---Cu and ternary Ti---Ni---Cu system by mechanical alloying. In: Materials Science and Engineering: A, 149 (2). pp. 231-240.

Murty, BS and Rao, Mohan M and Ranganathan, S (1995) Differences in the glass-forming ability of rapidly solidified and mechanically alloyed Ti-Ni-Cu alloys. In: Materials Science and Engineering A, 196 (1-2). pp. 237-241.

Murty, BS and Rao, Mohan M and Ranganathan, S (1995) Milling maps and amorphization during mechanical alloying. In: Acta Metallurgica et Materialia, 43 (6). pp. 2443-2450.

Murty, BS and Rao, Mohan M and Ranganathan, S (1993) Nanocrystalline phase formation and extension of solid solubility by mechanical alloying in Ti-based systems. In: First International Conference on Nanostructured Materials, 22-26 Sept. 1992, Cancun, Mexico, pp. 459-467.

Murty, BS and Rao, Mohan M and Ranganathan, S (1995) Thermodynamics of Glass Formation in Pure Metals. In: Calphad, 19 (3). pp. 297-304.

Murty, KN and Vasu, KI (1970) Clustering Kinelics in Aluminium-Silver Alloys. In: Materials Science and Engineering, 5 (5). pp. 251-257.

Murty, KN and Vasu, KI (1970) Clustering kinetics in aluminium-silver alloys. In: Materials Science and Engineering, 5 (5). pp. 251-257.

Murty, KN and Vasu, KI (1972) Vacancy-solute interaction energies in aluminium-silver alloys. In: Scripta Metallurgica, 6 (1). pp. 13-16.

Murty, KN and Vasu, KI (1971) A study of the slow reaction in Al-5 wt.% Ag alloy by resistivity measurements. In: Materials Science and Engineering, 7 (4). pp. 208-214.

Murty, S V S Narayana and Nayan, Niraj and Kumar, Pankaj and Narayanan, P Ramesh and Sharma, S C and George, Koshy M (2014) Microstructure-texture-mechanical properties relationship in multi-pass warm rolled Ti-6Al-4V Alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 589 . pp. 174-181.

Murugan, M and Shetty, PK and Ravi, R and Subbiah, A (2009) The Physiological Ecology of Cardamom (Elettaria cardamomum M) in Cardamom Agroforestry System. In: International Journal of Environmental Research, 3 (1). pp. 35-44.

Murugan, Muthusamy and Shetty, Paddu Krishnappa and Anandhi, Auvudai and Ravi, Raju and Alappan, Subbiah and Vasudevan, Muhund and Gopalan, Sreeja (2009) Rainfall changes over tropical montane cloud forests of southern Western Ghats, India. In: Current science, 97 (12). pp. 1755-1760.

N

Nabi, Hasan Sadat and Pentcheva, Rossitza and Ranjan, Rajeev (2010) Ab initio electronic structures of rhombohedral and cubic HgXO3 (X = Ti, Pb). In: Journal Of Physics-Condensed Matter, 22 (4).

Nachiappan, C and Rangaraj, L and Divakar, C and Jayaram, V (2010) Synthesis and Densification of Monolithic Zirconium Carbide by Reactive Hot Pressing. In: Journal of the American Ceramic Society, 93 (5). pp. 1341-1346.

Nagarajan, R and Ranganathan, S and Aoki, K and Chattopadhyay, K (1997) Metastable microstructures in rapidly solidified Ni rich TiNi alloys. In: Materials Transactions, JIM, 38 (5). pp. 406-412.

Nagarajan, R and Aoki, K and Chattopadhyay, K (1994) Microstructural development in rapidly solidified Ti-Ni alloys. In: Eighth International Conference on Rapidly Quenched and Metastable Materials, 22-27 Aug. 1993, Sendai, Japan, pp. 198-204.

Nagarajan, R and Aoki, K and Chattopadhyay, K (1997) Synthesis of nanodispersed phases during rapid solidification and crystallization of glasses in Ti75Ni25 alloys. In: Metallurgical and Materials Transactions A, 28 (11). pp. 2223-2232.

Nagarajan, R and Chattopadhyay, K (1994) Intermetallic Ti2Ni/TiNi nanocomposite by rapid solidification. In: Acta metallurgica et materialia, 42 (3). 947 -958 .

Nagarajan, R and Manjini, S and Chattopadhyay, K and Aoki, K (1997) The effect of ternary addition of silicon on the structure and microstructure of rapidly solidified equiatomic TiNi alloys. In: Journal of Materials Science, 32 (22). pp. 6021-6027.

Nagarajan, R and Ranganathan, S (1994) A study of the glass-forming range in the ternary Ti-Ni-Al system by mechanical alloying. In: Eighth International Conference on Rapidly Quenched and Metastable Materials, 22-27 Aug. 1993, Sendai, Japan, pp. 168-172.

Nagarajan, R and Ranganathan, S and Chattopadhyay, K (1997) Synthesis of nanostructured titanium alloys. In: Metals Materials and Processes, 9 (3). pp. 259-266.

Nagarajan, Sucheta and Dutta, B and Surappa, MK (1999) The effect of SiC particles on the size and morphology of eutectic silicon in cast A356/SiCp composites. In: Composites Science and Technology, 59 (6). 897-902 .

Nagaraju, Ganganagappa and Chithaiahb, Pallellappa and Ashokac, Siddaramanna and Mahadevaiah, Narayanappa (2012) Vanadium pentoxide nanobelts: One pot synthesis and its lithium storage behavior. In: CRYSTAL RESEARCH AND TECHNOLOGY, 47 (8). pp. 868-875.

Nagendra, HR and Tirunarayanan, MA and Ramachandran, A (1970) Free convection heat transfer in vertical annuli. In: Chemical Engineering Science, 25 (4). pp. 605-610.

Nagendra, N and Jayaram, V (2000) Fracture and R-curves in high volume fraction Al2O3/Al composites. [Preprint]

Nagendra, N and Jayaram, V (2000) Fracture and R-curves in high volume fraction Al2O3/Al composites. In: Journal of Materials Research, 15 (5). pp. 1131-1144.

Nagendra, N and Jayaram, V (2000) Influence of matrix characteristics on fracture toughness of high volume fraction Al2O3 / Al-AlN composites. [Preprint]

Nagendra, N and Jayaram, V (2000) Influence of matrix characteristics on fracture toughness of high volume fraction Al2O3/Al–AlN composites. In: Journal of Materials Research, 15 (5). pp. 1145-1153.

Nagendra, N and Rao, BS and Jayaram, V (1999) Microstructures and properties of Al2O3/ Al-AlN composites by Pressureless Infiltration of Al-alloys. [Preprint]

Nagendran, R and Shakuntala, K and Natarajan, GN and Vasan, HRK (1981) Observations On The Fecundity Of The Cyprinid Rasbora-Daniconius (Hamilton). In: Proceedings Of The Indian Academy Of Sciences-Animal Sciences, 90 (4). pp. 381-388.

Nanda, Ajaya K and Kishore, * (2001) Thermal-Initiating Potentialities of Poly(methyl methacrylate) Peroxide: Metamorphosis of Block-into-Block Copolymer and Comparative Studies on Surface Texture and Morphology. In: Journal Polymer Science A: Polymer Chemistry, 39 . pp. 546-554.

Nanda, Ajaya Kumar and *, Kishore (2000) Thermal-Initiating Potentialities of Vinyl Polyperoxides: Transmutation of Block-into-Block Copolymer and an Exploratory Investigation of Surface Texture and Morphology. In: Journal of Polymer Science Part -A Polymer Chemistry, 38 (19). pp. 3665-3673.

Nandi, Proloy and Suwas, Satyam and Kumar, Subodh and Chattopadhyay, Kamanio (2013) The effect of minor addition of Ni on the microstructural evolution and mechanical properties of suction cast Al-0.14 at. pct Sc binary alloy. In: Metallurgical and Materials Transactions A, 44A (6). pp. 2591-2603.

Narasimhamurty, Vagesh D and Kumar, Subodh and Gupta, Govind S and Gupta, Manoj (2004) Evaluation of elastic modulus of an Al-MMC using finite element analysis. In: Steel GRIPS, 2 (3). pp. 198-202.

Narasimhan, R and Subramanya, HY and Patil, SD and Tandaiya, Parag and Ramamurty, U (2009) Stationary crack tip fields in elastic-plastic solids: an overview of recent numerical simulations. In: Journal Of Physics D-Applied Physics, 42 (21). 214005-1-214005-15.

Narayan, Manish and Surappa, MK and Bai, Pramila BN (1995) Dry sliding wear of Al alloy 2024-Al203 particle metal matrix composites. In: Wear, 181 (part 2). pp. 563-570.

Narayan, RL and Boopathy, Kombaiah and Sen, Indrani and Hofmann, DC and Ramamurty, U (2010) On the hardness and elastic modulus of bulk metallic glass matrix composites. In: Scripta Materialia, 63 (7). pp. 768-771.

Narayan, RL and Singh, PS and Hofmann, DC and Hutchinson, N and Flores, KM and Ramamurty, U (2012) On the microstructure-tensile property correlations in bulk metallic glass matrix composites with crystalline dendrites. In: ACTA MATERIALIA, 60 (13-14). pp. 5089-5100.

Narayanan, S and Raghunathan, N and Nayak, UB and Lahiri, AK (1983) Environmental effects on grinding. In: International Journal of Mineral Processing, 10 (4). pp. 309-317.

Natarajan, KA (1993) Biotechnology in gold processing. In: Bulletin of Materials Science, 16 (6). pp. 501-508.

Natarajan, KA (2009) Microbial Aspects of Environmentally Benign Iron Ore. In: Iron Ore Conference 2009, July 27-29, 2009, Perth, Australia, pp. 27-34.

Natarajan, KA (2009) Microbial aspects of acid generation and bioremediation with relevance to indian mining. In: 18th International Biohydrometallurgy Symposium Bariloche, SEP 13-17, 2009, Bariloche, ARGENTINA, pp. 645-648.

Natarajan, KA and Iwasaki, I (1985) Electrochemical aspects of xanthate and sulfide mineral oxidation by ozone. [Book Chapter]

Natarajan, KA and Upadhyaya, Ramesh (1986) Flocculation studies on iron ore fines using synthetic polymeric flocculants. In: Transactions of the Indian Institute of Metals, 39 (6). pp. 627-636.

Natarajan, K A and Padukone, S Usha (2012) Microbially induced separation of quartz from hematite using yeast cells and metabolites. In: MINERALS & METALLURGICAL PROCESSING, 29 (2). pp. 81-87.

Natarajan, KA (1992) Ball wear and its control in the grinding of a lead-zinc sulphide ore. In: International Journal of Mineral Processing, 34 (1-2). pp. 161-175.

Natarajan, KA (1998) Biocorrosion in industrial applications. In: International Conference on Corrosion (CORCON 97), DEC 03-06, 1997, Mumbai, India.

Natarajan, KA (1992) Bioleaching of sulphides under applied potentials. In: Hydrometallurgy, 29 (1-3). pp. 161-172.

Natarajan, KA (1985) Corrosive and abrasive wear in ore grinding. In: Wear, 103 (3). pp. 253-267.

Natarajan, KA (2013) Developments in Biotechnology for Environmentally Benign Iron Ore Beneficiation. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 66 (5-6, S). pp. 457-465.

Natarajan, KA (1992) Effect of Applied Potentials on the Activity and Growth of Thiobacillus ferrooxidans. In: Biotechnology and Bioengineering, 39 (9). pp. 907-913.

Natarajan, KA (1992) Electrobioleaching of base metal sulfides. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 23 (1). pp. 5-11.

Natarajan, KA (1996) Laboratory studies on ball wear in the grinding of a chalcopyrite ore. In: International Journal of Mineral Processing, 46 (3-4). pp. 205-213.

Natarajan, KA (2006) Microbially-induced mineral flotation and flocculation: Prospects and challenges. In: Proc. XXIII Int. Mineral Processing Congress, Sep 2006, Istanbul, Turkey.

Natarajan, KA and Ambika, SN (2008) Biological aspects of ARSENIC Speciation and Remediation. In: Hydrometallurgy-2008 (SME).

Natarajan, KA and Das, A (2003) Surface chemical studies on ‘Acidithiobacillus’ group of bacteria with reference to mineral flocculation. In: International Journal of Mineral Processing, 72 (1-4). pp. 189-198.

Natarajan, KA and Deo, Namita (2001) Role of bacterial interaction and bioreagents in iron ore flotation. In: International Journal of Mineral Processing, 62 (1-4). pp. 143-157.

Natarajan, KA and Modak, JM and Anand, P (1997) Some microbiological aspects of bauxite mineralization and beneficiation. In: Minerals and Metallurgical Processing, 14 (2). pp. 47-53.

Natarajan, KA and Padukone, Usha S (2013) Biological sulfate reduction of a sulfate-rich industrial waste liquor using sulfate reducing bacteria. In: Minerals & Metallurgical Processing Journal, 30 (4). pp. 205-211.

Natarajan, KA and Prakasan, Sabari MR (2013) Biodegradation of sodium isopropyl xanthate by Paenibacillus polymyxa and Pseudomonas putida. In: Minerals & Metallurgical Processing Journal, 30 (4). pp. 226-232.

Natarajan, KA and Subramanian, S and Braun, Jean-Jacques (2006) Environmental impact of metal mining biotechnological aspects of water pollution and remediation an Indian experience. In: Journal of Geochemical Exploration, 88 (1-3). pp. 45-48.

Natarajan, KA and Subramanian, S and Modak, JM (1999) Biosorption of heavy metal ions from aqueous and cyanide solutions using fungal biomass. In: Biohydrometallurgy and the Environment Toward the Mining of the 21st Century - Proceedings of the International Biohydrometallurgy Symposium, JUN 20-23, 1999, Madrid, Spain.

Natarajan, KA and Sudeesha, K and Rao, GR (1994) Stability of copper tolerance in Thiobacillus ferrooxidans. In: Antonie van Leeuwenhoek, 66 (4). pp. 303-306.

Nayak, HV Sudhaker and Vasu, KI and Prasad, YVRK (1980) Texture dependent stress corrosion failure of commercial titanium sheets in bromine-methanol solution. In: Journal of Materials Science, 15 (5). pp. 1265-1275.

Nayak, Sudhakar HV and Vasu, KI and Prasad, YVRK (1978) Transcrystalline stress corrosion cracking in cold rolled commercial titanium in methanol-bromine solution: Role of crystallographic texture. In: Scripta Metallurgica, 12 (10). 869-872 .

Nayan, N and Roy, D and Buravalla, V and Ramamurty, U (2008) Unnotched fatigue behavior of an austenitic Ni-Ti shape memory alloy. In: Materials Science and Engineering A, 497 (1-2). pp. 333-340.

Nayan, Niraj and Buravalla, V and Ramamurty, U (2009) Effect of mechanical cycling on the stress-strain response of a martensitic Nitinol shape memory alloy. In: Materials Science and Engineering A, 525 (1-2). pp. 60-67.

Neelgund, Gururaj M and Shivashankar, SA and Narasimhamurthy, T and Rathore, RS (2007) Tris(acetylacetonato-kappa O-2,O`)(1,10-phenanthroline-kappa N-2,N`)erbium(III). In: Acta Crystallographica Section C-Crystal Structure Communications, 63 (Part 2). M74-M76.

Neogy, S and Tewari, R and Dey, GK and Banerjee, S and Ranganathan, S (2012) A study on the formation of crystalline phases during solidification and crystallisation in the bulk metallic glass of Zr53Cu21Al10Ni8Ti8 composition. In: PHILOSOPHICAL MAGAZINE, 92 (17). pp. 2136-2149.

Nethravathi, C and Machado, Jyothi and Gautam, UK and Avadhani, GS and Rajamathi, Michael (2012) Exfoliation of copper hydroxysalt in water and the conversion of the exfoliated layers to cupric and cuprous oxide nanoparticles. In: Nanoscale , 4 (2). pp. 496-501.

Nolan, D and Dwarkadasa, ES and Chandra, T (1988) Deformation Of Al-Li-Cu-Mg-Zr Alloys At High-Temperatures. In: Journal of Metals, 40 (11). p. 47.

O

Okabe, TH and Waseda, Y and Hirota, K and Jacob, KT (1998) Thermodynamic properties of Ln-O (Ln = La, Pr, Nd) solid solutions and their deoxidation by molten salt electrolysis. In: The Mining and Materials Processing Institute of Japan, 114 (11). pp. 813-818.

Okabe, TH and Waseda, Y and Jacob, KT (2001) The Thermodynamics of Oxygen in Reactive Metals. In: Purification Process and Characterization of Ultra High Purity Metals (1). pp. 3-38.

Okabe, TH and Waseda, Y and Jacob, KT and Horiuchi, A (2000) Physicochemical studies of lithium nitride in molten LiCl-KCl. In: Materials Transactions, JIM, 41 (7). pp. 822-830.

Okabe, TH and Waseda, Y and Jacob, KT and Park, I (1999) Production of niobium powder by electronically mediated reaction (EMR) using calcium as a reductant. In: Journal of Alloys and Compounds, 288 (1-2). pp. 200-210.

Okabe, Toru H (2001) Electrochemical Properties of Li3N Dissolved in Molten LiCl at 900 K. In: Journal of The Electrochemical Society, 148 (5).

Owen, DM and Chokshi, AH (1998) Final stage free sintering and sinter forging behavior of a yttria-stabilized tetragonal zirconia. In: Acta Materialia, 46 (02). pp. 719-729.

Owen, DM and Chokshi, AH (1998) The high temperature mechanical characteristics of superplastic 3 mol% yttria stabilized zirconia. In: Acta Materialia, 46 (02). pp. 667-679.

Owen, David M and Chokshi, Atul H (2001) Analysis of deformation mechanisms in superplastic yttria-stabilized tetragonal zirconia. In: International Journal of Plasticity, 17 (3). pp. 353-368.

Owen, David M and Chokshi, Atul H and Nutt, Steven R (1997) Nucleation and growth characteristics of cavities during the early stages of tensile creep deformation in a superplastic zirconia-20 wt% alumina composite. In: Journal of the American Ceramic Society, 80 (9). pp. 2433-2436.

Ozdilek, Ceren and Bose, Suryasarathi and Leys, Jan and Seo, Jin Won and Wubbenhorst, Michael and Moldenaers, Paula (2011) Thermally induced phase separation in P alpha MSAN/PMMA blends in presence of functionalized multiwall carbon nanotubes: Rheology, morphology and electrical conductivity. In: Polymer, 52 (20). pp. 4480-4489.

P

Padmanabhan, K and Kishore, * (1995) Failure behaviour of carbon fibre/epoxy composites in pin-ended buckling and bending tests. In: Composites, 26 (3). pp. 201-206.

Padmanabhan, K and Kishore, * (1994) Fibre-matrix interfacial failure sequences in translaminar flexure of glass-epoxy composites. In: Journal of Materials Science, 29 (1). pp. 33-38.

Padmanabhan, K and Kishore, * (1992) Flexural studies on asymmetric hybrid Kevlar fabric/epoxy composites. In: Journal of Materials Science, 27 (16). pp. 4282-4286.

Padmanabhan, K and Kishore, * (1994) On the elastic-plastic behaviour of woven fabric kevlar/epoxy composites. In: International Journal of Fracture, 65 (3). R59-R61.

Padmanabhan, K and Kishore, * (1990) The effect of carbon coating on the flexural properties of Kevlar/epoxy composites. In: Journal of Materials Science Letters, 9 (9). pp. 1109-1111.

Padmanabhan, K and Kishore, * (1993) The looping behaviour of Kevlar fibres. In: Scripta Metallurgica et Materialia, 28 (3). pp. 367-370.

Padmanabhan , K and Kishore, * (1990) Role of alumina in flexure of glass/epoxy composites. In: Bulletin of Materials Science, 13 (4). pp. 245-253.

Padmapriya, P and Abinandanan, TA and Jayaram, Vikram (1997) coarsening of an interconnected microstructure in an al-al2o3 composite. In: Scripta Materialia, 37 (12). pp. 1883-1888.

Padmavardhani, D and Prasad, YVRK (1991) Effect of zinc content on processing map for hot deformation of beta brass. In: Materials Science and Technology, 7 (10). pp. 947-953.

Padmavardhani, D and Prasad, YVRK (1991) Characterization of hot deformation behavior of brasses using processing maps: Part II. β Brass and α-β brass. In: Metallurgical Transactions. Physical Metallurgy and Material, 22 (12). pp. 2993-3001.

Padmavardhani, D and Prasad, YVRK (1993) Effect of Zirconium on the Processing MAPS For Hot-Working of Alpha-Beta Brass. In: Zeitschrift für Metallkunde, 84 (1). pp. 57-62.

Padmavardhani, D and Prasad, YVRK (1992) Effect of zinc content on the processing map for hot working of α brass. In: Materials Science and Engineering: A, 157 (1). pp. 43-51.

Padmavardhani, D and Prasad, YVRK (1993) Processing maps for hot working of Cu-Ni-Zn alloys Part II Alpha-Beta nickel silver. In: Journal of Materials Science (full set), 28 (19). pp. 5275-5279.

Padmavardhani , D and Prasad, YVRK (1993) Processing maps for hot working of Cu-Ni-Zn alloys. Part I - Alpha-nickel silver. In: Journal of Materials Science (full set), 28 (19). pp. 5269-5274.

Padrnanabhan, K and Kishore, * (1995) Interlaminar shear of woven fabric Kevlar-epoxy composites in three-point loading. In: Materials Science & Engineering A, 197 (1). pp. 113-118.

Padukone, Usha S and Natarajan, KA (2011) Microbially induced separation of quartz from calcite using Saccharomyces cerevisiae. In: Colloids and Surfaces B: Biointerfaces, 88 (1). pp. 45-50.

Pai, BC and Rohatgi, PK and Venkatesha, S (1974) Wear resistance of cast graphitic aluminium alloys. In: Wear, 30 (1). pp. 117-125.

Pakrashi, Sunandan and Dalai, Swayamprava and Prathna, TC and Trivedi, Shruti and Myneni, Radhika and Raichur, Ashok M and Chandrasekaran, N and Mukherjee, Amitava (2013) Cytotoxicity of aluminium oxide nanoparticles towards fresh water algal isolate at low exposure concentrations. In: Aquatic Toxicology, 132 . pp. 34-45.

Pakrashi, Sunandan and Jain, Nitin and Dalai, Swayamprava and Jayakumar, Jerobin and Chandrasekaran, Prathna Thanjavur and Raichur, Ashok M. and Chandrasekaran, Natarajan and Mukherjee, Amitava (2014) In Vivo Genotoxicity Assessment of Titanium Dioxide Nanoparticles by Allium cepa Root Tip Assay at High Exposure Concentrations. In: PLOS ONE, 9 (2).

Pal, S and Lahiri, AK (2006) An overview of mathematical model of liquid iron making processes. In: Tranascation of the Indian Institute of Metals, 59 (5). pp. 569-581.

Pal, Soupitak and Verma, Nisha and Jayaram, Vikram and Biswas, Sanjay Kumar and Riddle, Yancy (2011) Characterization of phase transformation behaviour and microstructural development of electroless Ni-B coating. In: Materials Science and Engineering A, 528 (28). pp. 8269-8276.

Pal, Subrata and Lahiri, Ashok Kumar (2003) Mathematical model of COREX melter gasifier: Part I. Steady-state model. In: Metallurgical and Materials Transactions B, 34 (1). pp. 103-114.

Pal, Subrata and Lahiri, Ashok Kumar (2003) Mathematical model of COREX melter gasifier: Part II. Dynamic model. In: Metallurgical and Materials Transactions B, 34 (1). pp. 115-119.

Palani, GS and Dattaguru, B and Iyer, NR (2005) Fracture analysis of cracked plate panels using NI-MVCCI technique. In: 4th Conference on Creep, Fatique and Creep-Fatique Internation, OCT 08-10, 2003, Kalpakkam, INDIA.

Palanisamy, Prakash and Raichur, Ashok M (2008) Biosurfactant mediated synthesis of NiO nanorods. In: Materials Letters, 62 (4-5). pp. 743-746.

Palanisamy, Prakash and Raichur, Ashok M (2008) Corrigendum to "Biosurfactant mediated synthesis of NiO nanorods" [Materials Letters, Volume 62, Issues 4–5, 2008, pp. 743–746]. In: Materials Letters, 62 (20). p. 3606.

Palanisamy, Prakash and Raichur, Ashok M (2009) Synthesis of spherical NiO nanoparticles through a novel biosurfactant mediated emulsion technique. In: Materials Science and Engineering C, 29 (01). pp. 199-204.

Palit, Mithun and Banumathy, S and Singh, AK and Pandian, S and Chattopadhyay, K (2011) Crystallography of solid-liquid interface and evolution of texture during directional solidification of Tb0.3Dy0.7Fe1.95 alloy. In: Intermetallics, 19 (3). pp. 357-368.

Palit, Mithun and Pandian, S and Chattopadhyay, Kamanio (2012) Phase relationships and magnetic properties of TbxDy1-xFe1.95 alloys. In: Journal of Alloys and Compounds, 541 . pp. 297-304.

Pan, J and Surappa, MK and Saravanan, RA and Liu, BW and Yang, DM (1998) Fabrication and characterization of $SiC/MoSi_2 $composites. In: Materials Science and Engineering A, 244 (02). pp. 191-198.

Pandit, Shashidhara S and Jacob, KT (1986) Vanadium-oxygen equilibrium in liquid cobalt at 1873 K. In: Transactions of the Indian Institute of Metals, 39 (6). pp. 556-561.

Pandit, SS and Jacob, KT (1989) Experimental and Computational Characterization of Alloy--Spinel--Corundum Equilibrium in the System Fe--Co--Al--O at 1873K. In: Scandinavian Journal of Metallurgy, 18 (2). pp. 73-80.

Pandit, SS and Jacob, KT (1990) Experimental and Computational Characterization of Alloy-Spinel-Corundum Equilibrium in the System NI-CO-AL-O AT 1873 K. In: Canadian Metallurgical Quarterly, 29 (1). pp. 21-26.

Pandit, SS and Jacob, KT (1995) Phase relations in the system MgO-SiO2-ZrO2 at 1700 K. In: Metallurgical and Materials Transactions A, 26 (2). pp. 397-399.

Pandit, SS and Jacob, KT (1994) Phase-relations in the system CAO-SIO2-ZRO2 AT 1573-K. In: Steel Research, 65 (10). 410-413 .

Pandit, SS and Jacob, KT (1987) Spinel deoxidation equilibria in the Fe Mn Al O system - experiments and computation. In: Steel Research, 58 (3). pp. 105-110.

Pandit, SS and Jacob, KT (1995) Thermodynamic properties of magnesium phosphate (Mg3P2O8) - correction of data in recent compilations. In: Metallurgical and materials transactions. A, 26A (1). pp. 225-227.

Pandit, SS and Jacob, KT (1995) Thermodynamic properties of magnesium phosphate (Mg3P2O8)�Correction of data in recent compilations. In: Metallurgical and Materials Transactions A, 26 (1). 225-227 .

Pandit, Shashidhara S and Jacob, KT (1988) Measurement and modeling of Alloy-Spinel-Corundum equilibrium in the Ni-Mn-Al-0 system at 1873 K. In: Metallurgical and Materials Transactions B, 19 (3). pp. 459-463.

Pandit, Shashidhara S and Weyl, Axel and Janke, Dieter (1994) High-temperature ionic and electronic conduction in zirconate and hafnate compounds. In: Solid State Ionics, 69 (2). pp. 93-99.

Pandiyarajan, T and Karthikeyan, B and Venkatesan, P and Ashok, M and Anandan, S and Giridharan, NV (2009) Simple synthesis and spectroscopic studies on cobalt added ZnO nanocrystals. In: Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 74 (1). pp. 84-86.

Panicker, MRR and Chokshi, AH (2011) Influence of grain size on high temperature fracture in a Mg AZ31 alloy. In: Materials Science and Engineering A, 528 (7-8). pp. 3031-3036.

Panicker, R and Chokshi, AH and Mishra, RK and Verma, R and Krajewski, PE (2009) Microstructural evolution and grain boundary sliding in a superplastic magnesium AZ31 alloy. In: Acta Materialia, 57 (13). pp. 3683-3693.

Parida, SC and Dash, S and Singh, Z and Prasad, R and Jacob, KT and Venugopal, V (2002) Thermodynamic studies on NdFeO3(s). In: Journal of Solid State Chemistry, 164 (1). pp. 34-41.

Parida, SC and Jacob, KT and Venugopal, V (2002) System Dy-Fe-O: thermodynamic properties of ternary oxides using Calvet calorimetry and solid-state electrochemical cell. In: Solid State Sciences, 4 (10). pp. 1245-1255.

Parida, SC and Jacob, KT and Venugopal, V (2003) Thermodynamic properties of SmFeO3(S) and SM3R5O12(S). In: Journal of Phase Equilibria, 24 (5). pp. 431-440.

Park, Jin Man and Mattern, Norbert and Kuehn, Uta and Eckert, Juergen and Kim, Ki Buem and Kim, Won Tae and Chattopadhyay, Kamanio and Kim, Do Hyang (2009) High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity. In: Journal of Materials Research, 24 (8). 2605 -2609.

Partha, Patra and Natarajan, KA (2004) Microbially enhanced removal of pyrite and chalcopyrite from oxide gangue minerals with reference to desulfurization of tailings. In: Minerals and Metallurgical Processing, 21 (4). pp. 169-178.

Parveen, Ameena and Anilkumar, Koppalkar R and Patil, Shantala D and Roy, Aashis S (2013) PEO|Sncl(2)|PANI composites: as an electrolyte in solid-state battery. In: IONICS, 19 (1). pp. 91-97.

Parveen, Ameena and Dashpande, Raghunandan and Ahmed, Shakeel and Roy, Aashis S (2013) Synthesis, characterisation, and DC conductivity of polyaniline-lead oxide composites. In: CHEMICAL PAPERS, 67 (3). pp. 350-356.

Parveen, Ameena and Koppalkar, Anilkumar and Roy, Aashis S (2013) Liquefied Petroleum Gas Sensing of Polyaniline-Titanium Dioxide Nanocomposites. In: SENSOR LETTERS, 11 (2). pp. 242-248.

Parveen, Ameena and Koppalkar, Anilkumar R and Roy, Aashis S (2012) Surface Modified CaTiO3 Loaded in Polyaniline by Sodium Dodecyl Benzene Sulphonic Acid for Humidity Sensor. In: IEEE SENSORS JOURNAL, 12 (9). pp. 2817-2823.

Patel, Manish and Prasad, Bhanu VV and Jayaram, Vikram (2013) Heat conduction mechanisms in hot pressed ZrB2 and ZrB2-SiC composites. In: Journal of the European Ceramic Society, 33 (10). pp. 1615-1624.

Patel, Manish and Reddy, JJ and Prasad, Bhanu VV and Subrahmanyam, J and Jayaram, Vikram (2012) Residual strength of hot pressed zirconium diboride (ZrB2) after exposure to high temperatures. In: Materials Science and Engineering: A, 535 . pp. 189-196.

Patel, Manish and Reddy, Janardhan J and Prasad, Bhanu VV and Jayaram, Vikram (2012) Strength of hot pressed ZrB2-SiC composite after exposure to high temperatures (1000-1700 degrees C). In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 32 (16). pp. 4455-4467.

Patel, Manish and Singh, V and Reddy, JJ and Prasad, Bhanu VV and Jayaram, Vikram (2013) Densification mechanisms during hot pressing of ZrB2-20 vol.% SiC composite. In: SCRIPTA MATERIALIA, 69 (5). pp. 370-373.

Patnaik, MNM and Narasimhan, R and Ramamurty, U (2004) Spherical indentation response of metallic glasses. In: Acta Materialia, 52 (11). pp. 3335-3345.

Patnaik, S and Row, TNG and Raghunathan, L and Devi, A and Goswami, J and Shivashankar, SA and Chandrasekaran, S and Robinson, WT (1996) Low-temperature structure of two copper-based precursors for MOCVD: Aquabis(tert-butyl acetoacetato)copper(II) and Bis(dipivaloylmethanido)copper(II). In: Acta Crystallographica Section C, 52 (part 4). pp. 891-894.

Patra, P and Natarajan, KA (2003) Microbially-induced flocculation and flotation for pyrite separation from oxide gangue minerals. In: Minerals Engineering, 16 (10). pp. 965-973.

Patra, Partha and Natarajan, KA (2004) Microbially induced flocculation and flotation for separation of chalcopyrite from quartz and calcite. In: International Journal of Mineral Processing, 74 (1-4). pp. 143-155.

Patra, Partha and Natarajan, KA (2004) Microbially induced flotation and flocculation of pyrite and sphalerite. In: Colloids and Surfaces B: Biointerfaces, 36 (2). pp. 91-99.

Patra, Partha and Natarajan, KA (2008) Microbially-induced separation of chalcopyrite and galena. In: Minerals Engineering, 21 (10). pp. 691-698.

Patra, Partha and Natarajan, KA (2008) Role of mineral specific bacterial proteins in selective flocculation and flotation. In: International Journal of Mineral Processing, 88 (1-2). pp. 53-58.

Patra, Partha and Natarajan, KA (2008) Synthesis of Mineral-specific Bioproteins for Selective Mineral Flotation. In: Proceedings of XXIV International Mineral Processing Congress, Beijing (IMPC-2008).

Patro, Debdutt and Jayaram, Vikram (2008) Kinetics of Pressureless Infiltration of Al-Mg Melts into Porous Alumina Preforms. In: Metallurgical and Materials Transactions B, 39 (1). pp. 108-115.

Paul, A (2009) Comments on "Room temperature interfacial reactions in electrodeposited Au/Sn couples". In: Scripta Materialia, 61 (6). pp. 561-563.

Paul, A (2013) Comments on ``Enhanced growth of the Ni3Sn4 phase at the Sn/Ni interface subjected to strains''. In: SCRIPTA MATERIALIA, 68 (6). pp. 440-441.

Paul, A (2011) Growth mechanism of phases, Kirkendall voids, marker plane position, and indication of the relative mobilities of the species in the interdiffusion zone. In: Journal of Materials Science: Materials in Electronics, 22 (7). pp. 833-837.

Paul, A and Ghosh, C and Boettinger, WJ (2011) Diffusion Parameters and Growth Mechanism of Phases in the Cu-Sn System. In: Metallurgical and Materials Transactions A, 42A (4). pp. 952-963.

Paul, A and Kodentsov, AA and Loo, van FJJ (2006) Physico-chemical analysis of compound growth in a diffusion couple with two-phase end-members. In: Intermetallics, 14 (12). pp. 1428-1432.

Paul, A and Laurila, T (2012) Comments on ``Effects of current density on the formation and microstructure of Sn-9Zn, Sn-8Zn-3Bi and Sn-3Ag-0.5Cu solder joints''. In: Intermetallics, 28 . pp. 164-165.

Paul, Aloke (2013) Discussion of ``The Development of the Concept of Vacancy-Mediated Substitutional Diffusion: The Important Contribution from Fredrick Seitz''. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (13). pp. 5622-5624.

Paul, Aloke (2013) A pseudobinary approach to study interdiffusion and the Kirkendall effect in multicomponent systems. In: Philosophical Magazine, 93 (18). pp. 2297-2315.

Paul, Arindam and Jayaram, Vikram (2011) Deformation and structural densification in Al2O3-Y2O3 glass. In: Acta Materialia, 59 (1). pp. 82-92.

Pawlas-Foryst, E and Jacob, KT and Fitzner, K (2006) Thermodynamics of GdMnO3 and GdMn2O5 phases determined by the EMF method. In: Archives Of Metallurgy And Materials, 51 (3). pp. 481-488.

Pawlas-Foryst, E and Jacob, KT and Fitzner, K (2006) Thermodynamics of SmMnO3 and SmMn2O5 phases determined by the E.M.F. method. In: Archives of Metallurgy and Materials, 51 (2). pp. 253-260.

Petric, A and Jacob, KT (1985) The Co Cr S ternary diagram at 1223 K and applications to corrosion. In: Metallurgical and Materials Transactions A, 16 (4). pp. 503-510.

Petric, A and Jacob, KT (1982) Inter and intra crystalline ion exchange equilibria in the system Fe Cr Al O. In: Solid State Ionics, 6 (1). pp. 47-56.

Petric, A and Jacob, KT (1982) Thermodynamic properties of Fe3O4 FeV2O4 and Fe3O4 FeCr2O4 spinel solid solutions. In: Journal of the American Ceramic Society, 65 (2). pp. 117-123.

Petric, A and Jacob, KT and Alcock, CB (1981) Thermodynamic properties of Fe3O4 FeAl2O4 spinel solid solution. In: Journal of the American Ceramic Society, 64 (11). pp. 632-639.

Phanikumar, G and Dutta, P and Chattopadhyay, K (2005) Continuous welding of Cu-Ni dissimilar couple using $CO_{2}$ laser. In: Science and Technology of Welding and Joining, 10 (2). pp. 158-166.

Phanikumar, G and Chattopadhyay, K (2001) Solidification microstructure development. In: Sadhana, 26 (1&2). pp. 25-34.

Phanikumar, G and Chattopadhyay, K and Dutta, P (2011) Joining of dissimilar metals: issues and modelling techniques. In: Science and Technology of Welding & Joining, 16 (4). pp. 313-317.

Phanikumar, G and Chattopadhyay, K and Dutta, P (2000) Supercomputing applications in materials engineering. In: Current Science, 78 (7). pp. 847-849.

Phanikumar, G and Manjini, S and Dutta, P and Mazumder, J and Chattopadhyay, K (2005) Characterization of a continuous CO2 laser-welded Fe-Cu dissimilar couple. In: Metallurgical and Materials Transactions A, 36A (8). pp. 2137-2147.

Phanikumar, Gandham and Biswas, Krishanu and Funke, Oliver and Holland-Moritz, Dirk and Herlach, Dieter M and Chattopadhyay, Kamanio (2005) Solidification of undercooled peritectic Fe-Ge alloy. In: Acta Materialia, 53 (13). pp. 3591-3600.

Phanikumar, Gandham and Dutta, Pradip and Galun, Rolf and Chattopadhyay, Kamanio (2004) Microstructural evolution during remelting of laser surface alloyed hyper-monotectic Al–Bi alloy. In: Materials Science and Engineering: A, 371 (1-2). pp. 91-102.

Phaniraj, M and Shamasundar, S and Lahiri, AK (2001) Relevance of ROT control for hot rolled low carbon steels. In: Steel Research, 72 (5-6). pp. 221-224.

Phaniraj, MP and Lahiri, AK (2008) Constitutive equation for elevated temperature flow behavior of plain carbon steels using dimensional analysis. In: Materials & Design, 29 (3). pp. 734-738.

Phaniraj, MP and Lahiri, AK (2004) Constitutive model for vanadium microalloyed steel under hot working conditions. In: Materials Science and Technology, 20 (9). pp. 1151-1157.

Phaniraj, MP and Lahiri, AK (2004) Constitutive modelling of carbon and alloy steels. In: Materials Science and Technology, 20 (3). pp. 335-338.

Phaniraj, MP and Prasad, MJNV and Chokshi, AH (2007) Grain-size distribution effects in plastic flow and failure. In: Materials Science and Engineering A, 463 (1-2). pp. 231-237.

Phaniraj, Madakasira Prabhakar and Behera, Binod Bihari and Lahiri, Ashok Kumar (2005) Thermo-mechanical modeling of two phase rolling and microstructure evolution in the hot strip mill - Part I. Prediction of rolling loads and finish rolling temperature. In: Journal of Materials Processing Technology, 170 (1&2). pp. 323-335.

Phaniraj, Madakasira Prabhakar and Behera, Binod Bihari and Lahiri, Ashok Kumar (2006) Thermo-mechanical modeling of two phase rolling and microstructure evolution in the hot strip mill Part-II. Microstructure evolution. In: Journal of Materials Processing Technology, 178 (1-3). pp. 388-394.

Phaniraj, Prabhakar Madakasira and Lahiri, Ashok Kumar (2003) The applicability of neural network model to predict flow stress for carbon steels. In: Journal of Materials Processing Technology, 141 (2). pp. 219-227.

Pink, Erwin and Kumar, Subodh and Tian, Baohui (2000) Serrated flow of aluminium alloys influenced by precipitates. In: International-Union-of-Materials-Research-Societies International Conference on Advanced Materials (IUMRS-ICAM 99), JUN 13-18, 1999, Beijing, Peoples Republic China, pp. 17-24.

Pitchai, N and Nayak, UB and Lahiri, AK (1991) The influence of chemical additives on surface charge and hardness of hematite. In: International Journal of Mineral Processing, 31 (1-2). pp. 139-144.

Ponpandian, N and Greneche, JM and Guerault, H and Nakatsuka, K and Chinnasamy, CN and Narayanasamy, A and Justin, Joseyphus R and Chattopadhyay, K and Shinoda, K and Tohji, K and Jeyadevan, B (2001) Structure and magnetic properties of nanocrystalline ferrimagnetic CdFe2O4 spinel. In: Scripta Materialia, 44 (8-9). 1411-1415 .

Ponpandian, N and Narayanasamy, A and Chattopadhyay, K and Raja, Manivel M and Ganesan, K and Chinnasamy, CN and Jeyadevan, B (2003) Low-temperature magnetic properties and the crystallization behavior of FINEMET alloy. In: Journal Of Applied Physics, 93 (10). pp. 6182-6187.

Ponpandian, N and Narayanasamy, A and Chinnasamy, CN and Sivakumar, N and Greneche, JM and Chattopadhyay, K and Shinoda, K and Jeyadevan, B and Tohji, K (2005) Neel temperature enhancement in nanostructured nickel zinc ferrite. In: Applied Physics Letters, 86 (19). pp. 192510-1.

Ponpandian, N and Narayanasamy, A and Prabhu, D and Ganesan, K and Raja, Manivel M and Chattopadhyay, K (2006) Critical phenomena in FINEMET alloy. In: Journal of Magnetism and Magnetic Materials, 296 (2). pp. 67-76.

Poorni, S and Natarajan, KA (2013) Microbially induced selective flocculation of hematite from kaolinite. In: INTERNATIONAL JOURNAL OF MINERAL PROCESSING, 125 . pp. 92-100.

Potnis, Prashant and Holtzinger, Jennifer and Das, Dipak and Jayaram, Vikram and Biswas, SK (2009) Study of fracture behaviour of bond coats on nickel superalloy by three-point bending of microbeams. In: Surface and Coatings Technology, 204 (5). pp. 586-592.

Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2010) A parameter characterizing plowing nature of surfaces close to Gaussian. In: Tribology International, 43 (1-2). pp. 370-380.

Prabhu, Niranjana T and Rao, Jagannadha Y and Prashantha, K (2004) Studies on flocculation of clay suspension by polyacrylamide. In: E-polymers (057). p. 7.

Prabhu, D and Ganesan, K and Narayanasamy, A and Chattopadhyay, K and Ponpandian, N (2007) Magnetic properties of amorphous $Fe_{73.5}Cu_1Mo_3Si_{12.5}Al_1B_9$ alloy. In: Materials Science and Engineering A, 449-45 . pp. 452-455.

Prabhu, D and Narayanasamy, A and Chattopadhyay, K (2008) Effect of aluminum on the hyperfine field and crystallization behaviour of NANOPERM alloy. In: Hyperfine Interactions, 183 (1-3). pp. 7-15.

Prabhu, D and Narayanasamy, A and Chattopadhyay, K (2008) Effect of aluminum on the hyperfine field and crystallization behaviour of NANOPERM alloy. In: Hyperfine Interactions, 183 (1-3). pp. 7-15.

Prabhu, D and Narayanasamy, A and Ganesan, K and Ponpandian, N and Chattopadhyay, K (2007) Exchange field penetration in $Fe_{73.5}Cu_1Mo_3Si_{12.5}Al_1B_9$ alloy. In: Journal of Alloys and Compounds, 438 (1-2). pp. 15-20.

Prabhu, D and Narayanasamy, A and Shinoda, K and Jeyadeven, B and Greneche, JM and Chattopadhyay, K (2011) Grain size effect on the phase transformation temperature of nanostructured CuFe2O4. In: Journal of Applied Physics, 109 (1). 013532-1.

Prabhu, D and Narayanasmy, A and Chattopadhyay, K (2007) Effect of Al substitution on the magnetic properties of amorphous Fe73.5Cu1Mo3Si13.5-xAlxB9 alloy. In: Journal of Non-Crystalline Solids, 353 (16-17). pp. 1577-1581.

Prabhu, D and Veerababu, R and Balamuralikrishnan, R and Narayanasamy, A and Chattopadhyay, K (2012) Effect of addition of aluminum on the evolution of microstructure in HITPERM class Fe44Co44Zr7B4Cu1 alloy. In: MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 177 (11). pp. 791-796.

Prakasan, Sabari MR and Natarajan, KA (2010) Microbially induced separation of quartz from hematite using sulfate reducing bacteria. In: Colloids and Surfaces B: Biointerfaces, 78 (2). pp. 163-170.

Pramanick, Abhijit and Chatterjee, Subhradeep and Bhattacharya, Victoria and Chattopadhyay, Kamanio (2005) Synthesis and Microstructure of Laser Surface Alloyed Al–Sn–Si Layer on Commercial Aluminum Substrate. In: Journal of Materials Research, 20 (6). 1580-1589 .

Pramanik, AK and Ranjan, Rajeev and Banerjee, A (2012) Evolution of structural phase coexistence in a half doped manganite Pr0.5Sr0.5MnO3: An evidence for magneto-structural coupling. In: JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 325 . pp. 29-35.

Pramila, T and Rao, Ramananda G and Natarajan, KA and Rao, Durga C (1996) Differential influence of ions on the copy number of plasmids in Thiobacillus ferrooxidans. In: Current Microbiology, 32 (2). 57-63 .

Prasad, YVRK (1984) Texture-dependent mechanical properties of metals and alloys. In: Transactions of the Indian Institute of Metals, 37 (4). pp. 399-410.

Prasad, YVRK and Seshacharyulu, T (1998) Modelling of hot deformation for microstructural control. In: International Materials Reviews, 43 (6). pp. 243-258.

Prasad, Anamika and Dao, Ming and Ramamurty, Upadrasta (2009) Effect of Dilatation on the Elasto-Plastic Response of Bulk Metallic Glasses Under Indentation. In: MRS Proceedings, 1224 .

Prasad, Eswar K and Chollacoop, N and Ramamurty, U (2011) Role of indenter angle on the plastic deformation underneath a sharp indenter and on representative strains: An experimental and numerical study. In: Acta Materialia, 59 (11). pp. 4343-4355.

Prasad, Eswar K and Raghavan, R and Ramamurty, U (2007) Temperature dependence of pressure sensitivity in a metallic glass. In: Scripta Materialia, 57 (2). pp. 121-124.

Prasad, Eswar K and Rajesh, K and Ramamurty, U. (2014) Micropillar and macropillar compression responses of magnesium single crystals oriented for single slip or extension twinning. In: ACTA MATERIALIA, 65 . pp. 316-325.

Prasad, Eswar K and Ramamurty, U (2012) Effect of temperature on the plastic zone size and the shear band density in a bulk metallic glass. In: Materials Science and Engineering A, 535 . pp. 48-52.

Prasad, K Eswar and Keryvin, V and Ramamurty, U (2009) Pressure sensitive flow and constraint factor in amorphous materials below glass transition. In: International Symposium on Indentation Behavior of Materials, FEB, 2008, Hyderabad, pp. 890-897.

Prasad, K Eswar and Das, Barun and Maitra, Urmimala and Ramamurty, Upadrasta and Rao, CNR (2009) Extraordinary synergy in the mechanical properties of polymer matrix composites reinforced with 2 nanocarbons. In: PNAS, 106 (32). pp. 13186-13189.

Prasad, KVR and Raju, AR and Varma, KBR and Satyalakshmi, KM and Mallya, RM and Hegde, MS (1993) Growth and ferroelectric properties of Bi2VO5.5 thin films with metallic LaNiO3 electrodes. In: Applied Physics Letters, 63 (14). 1898 -1900.

Prasad, KVR and Varma, KBR and Raju, AR and Satyalakshmi, KM and Mallya, RM and Hegde, MS (1993) Growth and ferroelectric properties of $Bi_2VO_{5.5}$ thin films with metallic $LaNiO_3$ electrodes. In: Applied Physics Letters, 63 (14). pp. 1898-1900.

Prasad, MJNV and Chokshi, AH (2010) Extraordinary high strain rate superplasticity in electrodeposited nano-nickel and alloys. In: Scripta Materialia, 63 (1). pp. 136-139.

Prasad, MJNV and Chokshi, AH (2011) Microstructural stability and nanoindentation of an electrodeposited nanocrystalline Ni-1.5wt.%P alloy. In: Kovové materiály / Metallic Materials, 49 (1). pp. 93-99.

Prasad, MJNV and Chokshi, AH (2011) Microstructural stability and superplasticity in an electrodeposited nanocrystalline Ni-P alloy. In: Acta Materialia, 59 (10). pp. 4055-4067.

Prasad, MJNV and Chokshi, AH (2011) On the exothermic peak during annealing of electrodeposited nanocrystalline nickel. In: Scripta Materialia, 64 (6). pp. 544-547.

Prasad, MJNV and Chokshi, AH (2010) Superplasticity in electrodeposited nanocrystalline nickel. In: Acta Materialia, 58 (17). pp. 5724-5736.

Prasad, MJNV and Ghosh, P and Chokshi, AH (2009) Synthesis, Thermal stability and Mechanical Behavior of Nano-Nickel. In: Journal of the Indian Institute of Science, 89 (1). pp. 43-48.

Prasad, MJNV and Suwas, S and Chokshi, AH (2009) Microstructural evolution and mechanical characteristics in nanocrystalline nickel with a bimodal grain-size distribution. In: International Symposium on Bulk Nanostructured Materials: from Fundamentals to Innovation, BNM 2007, AUG 14-18, 2007, Ufa State Aviat Tech Univ, Ufa, Russia, pp. 86-91.

Prasad, PM and Subramanian, S (1997) Problems and prospects of red mud utilisation. In: Transactions of the Indian Institute of Metals, 50 (5). pp. 427-442.

Prasad, Ramesh GK and Chattopadhyay, K and Rao, Mohan M (1986) Structure-property correlation in dual-phase copper-tin alloys. In: Journal of Materials Science Letters, 5 (10). pp. 991-994.

Prasad, S and Paul, A (2009) Diffusion Parameters in the Nb-Mo System: Revisited. In: Metallurgical and Materials Transactions A, 40A (7). pp. 1512-1514.

Prasad, S and Paul, A (2012) Growth and consumption rates of the phase layers during interdiffusion in a diffusion couple with finite end member. In: Journal of Materials Science: Materials in Electronics, 23 (1). pp. 75-85.

Prasad, S and Paul, A (2011) Growth mechanism of phases by interdiffusion and atomic mechanism of diffusion in the molybdenum-silicon system. In: Intermetallics, 19 (8). pp. 1191-1200.

Prasad, S and Paul, A (2011) Growth mechanism of phases by interdiffusion and diffusion of species in the niobium-silicon system. In: Acta Materialia, 59 (4). pp. 1577-1585.

Prasad, S and Paul, A (2012) Growth mechanism of the Nb(X)Si-2 and [Nb(X)](5)Si-3 phases by reactive diffusion in Nb (X = Ti, Mo, or Zr)-Si systems. In: Intermetallics, 22 . pp. 210-217.

Prasad, S and Paul, A (2011) Reactive Diffusion Between Vanadium and Silicon. In: Journal of Phase Equilibria and Diffusion, 32 (3). pp. 212-218.

Prasad, S and Paul, A (2007) Theoretical consideration on the formation of nanotube following the Kirkendall effect. In: Applied Physics Letters, 90 (23). pp. 233114-3.

Prasad, Soma and Paul, Aloke (2012) Diffusion mechanism in XSi2 and X5Si3 (X= Nb, Mo, V) phases. In: International Conference on Diffusion in Materials (DIMAT 2011), JUL 03-08, 2011, ICB Lab, Dijon, FRANCE, pp. 459-464.

Prasad, Soma and Paul, Aloke (2012) Interdiffusion in Nb-Mo, Nb-Ti and Nb-Zr systems. In: International Conference on Diffusion in Materials (DIMAT 2011), JUL 03-08, 2011 , ICB Lab, Dijon, FRANCE, pp. 491-496.

Prasad, YVRK (1996) Dynamic materials model: Basis and principles - Reply. In: Metallurgical and Materials Transactions A, 27 (1). pp. 235-236.

Prasad, YVRK (2003) Processing Maps: A Status Report. In: Journal of Materials Engineering and Performance, 12 (6). pp. 638-645.

Prasad, YVRK (1990) Recent Advances in the Science of Mechanical processing. In: Indian Journal of Technology, 28 (6-8). pp. 435-451.

Prasad, YVRK and Gegel, HL and Doraivelu, SM and Malas, JC and Morgan, JT and Lark, KA and Barker, DR (1984) Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242. In: Metallurgical and Materials Transactions A, 15 (10). pp. 1883-1892.

Prasad, YVRK and Ramchandran, T (1971) Low-temperature creep in polycrystalline α-brass. In: Scripta Metallurgica, 5 (5). pp. 411-416.

Prasad, YVRK and Rao, Rama P (1980) Alloy design for fracture resistance. In: Sadhana - Academy Proceedings in Engineering Sciences, 3 (DEC). pp. 315-331.

Prasad, YVRK and Ravichandran, N (1991) Effect of stacking fault energy on the dynamic recrystallization during hot working of FCC metals: A study using processing maps. In: Bulletin of Materials Science, 14 (5). 1241 -1248.

Prasad, YVRK and Sasidhara, S and Sikka, VK (2000) Characterization of mechanisms of hot deformation of as-cast nickel aluminide alloy. In: Intermetallics, 8 (9-11). pp. 987-995.

Prasad, YVRK and Sastry, DH and Deevi, SC (2001) Hot working behavior of extruded powder products of B2 iron aluminide alloys. In: Materials Science and Engineering A, 311 (1-2). pp. 42-53.

Prasad, YVRK and Sastry, DH and Deevi, SC (2000) Processing maps for hot working of a P/M iron aluminide alloy. In: Intermetallics, 8 (9-11). pp. 1067-1074.

Prasad, YVRK and Sastry, DH and Vasu, KI (1970) Effect of Stacking-Fault Energy on Thermal Activation of Attractive Junctions in Change-in-Stress Creep of FCC Metals. In: Journal of Materials Science, 5 (6). pp. 495-506.

Prasad, YVRK and Sastry, DH and Vasu, KI (1970) Mechanism of low-temperature deformation in quenched aluminium-magnesium alloys. In: Materials Science and Engineering, 6 (5). pp. 327-333.

Prasad, YVRK and Sastry, DH and Vasu, KI (1970) On the effect of stacking fault energy on the thermal activation of attractive juntions in the low-temperature creep of F.C.C. metals. In: Scripta Metallurgica, 4 (3). pp. 219-220.

Prasad, YVRK and Sastry, DH and Vasu, KI (1969) The mechanism of hardening in quenched Al---0.5%Mg alloy at 86°K. In: Scripta Metallurgica, 3 (2). pp. 103-106.

Prasad, YVRK and Sastry, DH and Vasu, KI (1969) The nature of thermal activation of attractive junctions in the low-temperature creep of quenched aluminium and aluminium-magnesium alloys. In: Scripta Metallurgica, 3 (11). pp. 771-775.

Prasad, YVRK and Seshacharyulu, T (1998) Processing maps for hot working of titanium alloys. In: Materials Science and Engineering A, 243 (1-2). pp. 82-88.

Prasad, YVRK and Seshacharyulu, T and Medeiros, SC and Frazier, WG (2001) A Study of Beta Processing of Ti-6Al-4V: Is it Trivial? In: Journal of Engineering Materials and Technology, 123 (3). pp. 355-360.

Prasad, YVSS and Rao, P Ramachandra and Chattopadhyay, K (1984) The nature of non-equilibrium solidification of undercooled Agsingle bondCu alloys in contact with primary copper dendrites. In: Acta Metallurgica, 32 (10). pp. 1825-1828.

Prashanth, Gurusiddappa R and Goudar, Venkanagouda S and Raichur, Ashok M and Varma, Manoj M (2013) Enhancing fluorescence signals from aluminium thin films and foils using polyelectrolyte multilayers. In: Sensors and Actuators B: Chemical, 183 . pp. 496-503.

Prashanth, Gurusiddappa R and Goudar, Venkanagouda S and Suran, Swathi and Raichur, Ashok M and Varma, Manoj M (2012) Non-covalent functionalization using lithographically patterned polyelectrolyte multilayers for high-density microarrays. In: SENSORS AND ACTUATORS B-CHEMICAL, 171 . pp. 315-322.

Prashanth, KK and Chattopadhyay, K and Majumder, J (1999) An investigation on the laser surface alloying of copper on iron. In: Journal of Materials Science, 34 (14). pp. 3437-3445.

Prathna, TC and Chandrasekaran, N and Raichur, Ashok M and Mukherjee, Amitava (2011) Biomimetic synthesis of silver nanoparticles by Citrus limon (lemon) aqueous extract and theoretical prediction of particle size. In: Colloids and Surfaces B: Biointerfaces, 82 (1). pp. 152-159.

Prathna, TC and Chandrasekaran, N and Raichur, Ashok M and Mukherjee, Amitava (2011) Kinetic evolution studies of silver nanoparticles in a bio-based green synthesis process. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 377 (1-3). pp. 212-216.

Prathna, TC and Raichur, Ashok M and Chandrasekaran, N and Mukherjee, Amitava (2013) Heat mediated synthesis of silver nanoparticles using citrus limon (lemon) extract. In: Asian Journal of Chemistry, 25 (S). S305-S307.

Prathna, TC and Raichur, Ashok M and Chandrasekaran, N and Mukherjee, Amitava (2013) Process Development for Functionalization of Cotton with Silver Nanoparticles Synthesized by Bio-based Approaches. In: CURRENT NANOSCIENCE, 9 (4). pp. 479-488.

Praveena, Manimunda and Bain, Colin D and Jayaram, Vikram and Biswas, Sanjay K (2013) Total internal reflection (TIR) Raman tribometer: a new tool for in situ study of friction-induced material transfer. In: RSC ADVANCES, 3 (16). pp. 5401-5411.

Praveena, Manimunda and Jayaram, Vikram and Biswas, Sanjay K (2012) Friction between a Steel Ball and a Steel Flat Lubricated by MoS2 Particles Suspended in Hexadecane at 150 degrees C. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 51 (38). pp. 12321-12328.

Preetha, P and Thomas, Joy M and Ranjan, Rajeev (2012) Electrothermal Ageing of Epoxy Nanocomposites. In: IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 19 (6). pp. 2081-2089.

Priya, Shashank and Jacob, KT (2000) Activities and Immiscibility in the System Cu-Rh. In: Journal of Phase Equilibria, 21 (04). p. 342.

Priya, Angel J and Vijayalakshmi, SP and Raichui, Ashok M (2011) Enhanced Survival of Probiotic Lactobacillus acidophilus by Encapsulation with Nanostructured Polyelectrolyte Layers through Layer-by-Layer Approach. In: Journal of Agricultural and Food Chemistry, 59 (21). pp. 11838-11845.

Priya, Neela D and Modak, Jayant M and Raichur, Ashok M (2009) LbL Fabricated Poly(Styrene Sulfonate)/TiO2 Multilayer Thin Films for Environmental Applications. In: Acs Applied Materials & Interfaces, 1 (11). pp. 2684-2693.

Priya, Neela D and Modak, Jayant M and Trebse, Polonca and Zabar, Romina and Raichur, Ashok M (2011) Photocatalytic degradation of dimethoate using LbL fabricated TiO2/polymer hybrid films. In: Journal of Hazardous Materials, 195 . pp. 214-222.

R

R, Goswami and K, Chattopadhyay (1993) The superheating of Pb embedded in a Zn matrix the role of interface melting. In: Philosophical Magazine Letters, 68 (4). pp. 215-223.

RK, Mandal and S, Lele and S, Ranganathan (1993) Twinning of quasicrystals and related structures. In: Philosophical Magazine Letters, 67 (4). pp. 301-305.

Radhakrishna Bhat , BV and Mahajan, YR and Roshan, HMd and Prasad, YVRK (1994) Characteristics of superplasticity domain in the processing map for hot working of an Al alloy 2014---20vol.%Al2O3 metal matrix composite. In: Materials Science and Engineering: A, 212 (1). 178-181 .

Radhakrishnan, Krishna and Raichur, Ashok M (2012) Biologically triggered exploding protein based microcapsules for drug delivery. In: Chemical Communications, 48 (17). pp. 2307-2309.

Radhakrishnan, Krishna and Tripathy, Jasaswini and Raichur, Ashok M (2013) Dual enzyme responsive microcapsules simulating an ``OR'' logic gate for biologically triggered drug delivery applications. In: Chemical Communications, 49 (47). pp. 5390-5392.

Radhika, V and Subramanian, S and Natarajan, KA (2006) Bioremediation of zinc using Desulfotomaculum nigrificans: Bioprecipitation and characterization studies. In: Water Research, 40 (19). pp. 3628-3636.

Raghavan, R and Ayer, R and Jin, HW and Marzinsky, CN and Ramamurty, U (2008) Effect of shot peening on the fatigue life of a Zr-based bulk metallic glass. In: Scripta Materialia, 59 (2). pp. 167-170.

Raghavan, R and Boopathy, K and Ghisleni, R and Pouchon, MA and Ramamurty, U and Michler, J (2010) Ion irradiation enhances the mechanical performance of metallic glasses. In: Scripta Materialia, 62 (7). pp. 462-465.

Raghavan, R and Kombaiah, B and Doebeli, M and Erni, R and Ramamurty, U and Michler, J (2012) Nanoindentation response of an ion irradiated Zr-based bulk metallic glass. In: Materials Science and Engineering A, 532 . pp. 407-413.

Raghavan, R and Murali, P and Ramamurty, U (2008) Influence of Cooling Rate on the Enthalpy Relaxation and Fragility of a Metallic Glass. In: Symposium on Materials Behavior - Far from Equilibrium, DEC 15-16, 2006, Bombay.

Raghavan, R and Murali, P and Ramamurty, U (2009) On factors influencing the ductile-to-brittle transition in a bulk metallic glass. In: Acta Materialia, 57 (11). pp. 3332-3340.

Raghavan, R and Murali, p and Ramamurty, U (2006) Ductile to brittle transition in the $Zr_4_1_._2Ti_1_3_._7_5Cu_1_2_._5Ni_1_0Be_2_2_._5$ bulk metallic glass. In: Intermetallics, 14 (8-9). pp. 1051-1054.

Raghavan, R and Ramamurty, U and Basu, J and Ranganathan, S and Nishiyama, N (2003) Structural Relaxation and Crystallization in a Pd40Cu30Ni10P20 Bulk Metallic Glass. In: MRS Proceedings, 806 . MM9.6.

Raghavan, R and Shastry, VV and Kumar, A and Jayakumar, T and Ramamurty, U (2009) Toughness of as-cast and partially crystallized composites of a bulk metallic glass. In: Intermetallics, 17 (10). pp. 835-839.

Raghavan, S and Hajra, JP and Abraham, KP and Iyengar, GNK (1991) Terminal solid solubilities at 900–1000°C in the magnesium oxide-zinc oxide system measured using a magnesium fluoride solid-electrolyte galvanic cell. In: Thermochimica Acta, 189 (1). pp. 151-158. (In Press)

Raghavana, S and Iyengar, GNK and Abraham, KP (1985) Determination of the thermodynamic properties of \{xMgO + (1 - x)MnO\} (s, sln) from a solid-electrolyte galvanic cell in the temperature range 1163 to 1318 K. In: The Journal of Chemical Thermodynamics, 17 (6). pp. 585-591.

Raichur, AM (2006) Recent advances in biohydrometallurgy. In: Proceedings of Symposium on Emerging Trends in Separation Science and Technology SESTEC-2006, September 29-October1 2006, Mumbai.

Raichur, AM and Basu, Jyoti M (2001) Adsorption of fluoride onto mixed rare earth oxides. In: Separation and Purification Technology, 24 (1-2). pp. 121-127.

Raichur, AM and Panvekar, V (2002) Removal of As(V) by adsorption onto mixed rare earth oxides. In: Separation Science and Technology, 37 (5). pp. 1095-1108.

Raichur, AM and Parekh, BK and Wang, XH (2001) Estimation of surface free energy of pyrites by contact angle measurements. In: Minerals Engineering, 14 (1). pp. 65-75.

Raichur, AM and Vijayalakshmi, SP (2003) The effect of nature of raw coal on the adhesion of bacteria to coal surface. In: Fuel, 82 (2). pp. 225-231.

Raichur, AM and Wang, XH and Parekh, BK (2000) Quantifying pyrite surface oxidation kinetics by contact angle measurements. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 167 (3). pp. 245-251.

Raj, Markondeya P (1995) A critical assessment of the standard molar gibbs free energy of formation of NiWO4. In: Bulletin of Materials Science, 18 (5). pp. 623-630.

Raj, Markondeya P and Jacob, KT (1995) Standard molar gibbs free energies of formation of CoMoO4 and Co2Mo3O8. Consistency requirements. In: Materials Transactions, JIM, 36 (5). pp. 693-694.

Raj, Mohan P and Sarkar, S and Chakraborty, S and Phanikumar, G and Dutta, P and Chattopadhyay, K (2002) Modelling of transport phenomena in laser surface alloying with distributed species mass source. In: International Journal of Heat and Fluid Flow, 23 (3). pp. 298-307.

Raja, VS and Kishore, * and Ranganathan, S (1988) Effect Of Molybdenum And Silicon On The Electrochemical Corrosion Behavior Of Fenib Metallic Glasses. In: Corrosion, 44 (5). pp. 263-270.

Raja, KS and Misra, M and Raichur, AM and Kar, A (2008) Development of a novel biocompatible hydroxyapatite coated nanotubular titania for implant application. In: Proceedings of the 32nd International Conference on Advanced Ceramics and Composites, Daytona, January 26 - February 1, 2008 (Invited paper)pp 227-238, January 26 - February 1, 2008, Daytona.

Raja, Manivel M and Ponpandian, N and Majumdar, B and Narayanasamy, A and Chattopadhyay, K (2001) Soft magnetic properties of nanostructured FINEMET alloy powder cores. In: Materials Science and Engineering A, 304-30 . pp. 1062-1065.

Raja, Srinivasa V and Ranganathan, Srinivasa (1991) Crystallization characteristics of vitrovac 4040 (Fe39Ni39Mo4Si6B12). In: Zeitschrift für Metallkunde, 82 (12). pp. 907-912.

Raja, VS and Kishore, * and Ranganathan, S (1987) Crystallization behaviour of Metglas 2826 MB (Fe40Ni38Mo4B18). In: Bulletin of Materials Science, 9 (3). pp. 207-217.

Raja, VS and Kishore, * and Ranganathan, S (1990) Microstructural and kinetic aspects of devitrification of $Fe_{40}Ni_{40}B_{20}$ metallic glass. In: Journal of Materials Science, 25 (11). pp. 4667-4677.

Raja, VS and Kishore, K and Ranganathan, S (1987) Crystallization behavior of Metglas 2826 MB (iron-nickel-molybdenum-boron $(Fe_40Ni_38Mo_4B_18)$. In: Bulletin of Materials Science, 9 (3). pp. 207-217.

Rajamathi, Jacqueline T and Ahmed, Mohammed F and Ravishankar, N and Nethravathi, C and Rajamathi, Michael (2009) Anionic clay-Pt metal nanoparticle composite through intercalation of hexachloroplatinate in nickel zinc hydroxysalt. In: Solid State Sciences, 11 (7). pp. 1270-1274.

Rajaram, R and Ravichandran, N and Prasad, YVRK (1994) A study of hot deformation of Cd-1% Zn alloy using power dissipation maps. In: Zeitschrift fur Metallkunde, 85 (12). pp. 845-851.

Rajaram, G and Kumaran, S and Suwas, Satyam (2011) Effect of strain rate on tensile and compression behaviour of Al-Si/graphite composite. In: Materials Science and Engineering A, 528 (19-20). pp. 6271-6278.

Rajesh, G and Subramanian, S and Pillay, Anju M and Rajendra, A and Sharma, AK (2008) Studies on the effect of surfactants on the dispersion stability of PTFE suspension for Ni-PTFE composite coatings for space applications. In: Proceedings of the 24th Annual In-House Symposium on Space Science and Technology, January 2008, Bangalore.

Rajmohan, N and Jacob, KT (1992) Combined sulphation-chlorination roasting of oxides. In: Minerals Engineering, 5 (2). pp. 235-243.

Rajmohan, N and Jacob, KT (1992) Use of CaC12 as a chlorinating agent for oxides - A thermodynamic analysis. In: Minerals and Metallurgical Processing, 9 . pp. 141-145.

Rajneesh, S and Gupta, GS (2003) Importance of frictional forces on the formation of cavity in a packed bed under cross flow of gas. In: Powder Technology, 134 (1-2). pp. 72-85.

Rajneesh, S and Sarkar, S and Gupta, GS (2004) Prediction of Raceway Size in Blast Furnace from Two Dimensional Experimental Correlations. In: ISIJ International, 44 (8). pp. 1298-1307.

Raju, Sitarama K and Krishna, Ghanashyam M and Padmanabhan, KA and Muraleedharan, K and Gurao, NP and Wilde, G (2008) Grain size and grain boundary character distribution in ultra-fine grained (ECAP) nickel. In: Materials Science and Engineering: A, 491 (1-2). pp. 1-7.

Raju, Sitarama K and Krishna, Ghanashyam M and Padmanabhan, KA and Sarma, Subramanya V and Gurao, NP and Wilde, G (2011) Microstructure evolution and hardness variation during annealing of equal channel angular pressed ultra-fine grained nickel subjected to 12 passes. In: Journal of Materials Science , 46 (8). pp. 2662-2671.

Rama maurthy , RK and Mallikarjunan , R (1959) FLOTATION OF QUARTZ WITH SOAPS OF BOMBAX MALABARICA OIL AND SHARK LIVER OIL AS COLLECTORS. In: Journal of the Indian Institute of Science , 41 (4). pp. 30-35.

Ramachandra, S and Kumar, Sudheer P and Ramamurty, U (2003) Impact energy absorption in an Al foam at low velocities. In: Scripta Materialia, 49 (8). pp. 741-745.

Ramachandran, EG and Chinnappa, KV (2008) A Method for the Determination of Stress on Electrodeposition by using Electrical Strain Gauges The Societe Francaise de Metallurgie, LeChatelier Centenary Commemoration. In: Journal of Indian Institute of Science, 88 (3). pp. 795-803.

Ramakrishna, Rao VVVNS and Abraham, KP (1971) Kinetics of oxidation of copper sulfide. In: Metallurgical Transactions, 2 (9). pp. 2463-2470.

Ramamurthy, Praveen C and Mallya, Ashwini N and Joseph, Alex and Harrell, William R and Gregory, Richard V (2012) Synthesis and characterization of high molecular weight polyaniline for organic electronic applications. In: POLYMER ENGINEERING AND SCIENCE, 52 (8). pp. 1821-1830.

Ramamurty, U and Nagendra, N and Li, Y (2001) Variation in mechanical properties with crystallinity of a La-based bulk metallic glass. In: Metastable, Mechanically Alloyed and Nanocrystalline Materials ISMANAM - 2000. International Symposium, 9-14 July 2000, Oxford, UK, pp. 61-66.

Ramamurty, U (2005) Assessment of load transfer characteristics of a fiber-reinforced titanium-matrix composite. In: Composites Science and Technology, 65 (11-12). pp. 1815-1825.

Ramamurty, U and Bandyopadhyay, Amit and Dwarakadasa, ES (1993) Effect of heat treatment environment on Li depletion and on mechanical properties in AI-Li alloy sheets. In: Journal of Materials Science, 28 (23). pp. 6340-6346.

Ramamurty, U and Jana, S and Kawamura, Y and Chattopadhyay, K (2005) Hardness and plastic deformation in a bulk metallic glass. In: Acta Materialia, 53 (3). pp. 705-717.

Ramamurty, U and Kumaran, MC (2004) Mechanical property extraction through conical indentation of a closed-cell aluminum foam. In: Acta Materialia, 52 (1). pp. 181-189.

Ramamurty, U and Lee, ML and Basu, J and Li, Y (2002) Embrittlement of a bulk metallic glass due to low-temperature annealing. In: Scripta Materialia, 47 (2). pp. 107-111.

Ramamurty, U and Paul, A (2004) Variability in mechanical properties of a metal foam. In: Acta Materialia, 52 (4). pp. 869-876.

Ramamurty, Upadrasta and Jang, Jae-il (2014) Nanoindentation for probing the mechanical behavior of molecular crystals-a review of the technique and how to use it. In: CRYSTENGCOMM, 16 (1). pp. 12-23.

Raman, KHT and Kiran, MSRN and Ramamurty, U and Rao, Mohan G (2012) Structure and mechanical properties of Ti-C films deposited using combination of pulsed DC and normal DC magnetron co-sputtering. In: APPLIED SURFACE SCIENCE, 258 (22). pp. 8629-8635.

Raman, KS (1971) Resistometric studies of solute-vacancy interactions and clustering kinetics in an FCC matrix [AlZn Alloy with Ag, Ce, Dy, Li, Nb, Pt, Sb, Y, or Yb]. In: Scripta Metallurgica, 5 (9). pp. 791-793.

Raman, KS and Das, ESD and Vasu, KI (1973) Clustering Rate-Reversal Temperature And Other Pre-Precipitation Characteristics Of Al-Zn-Ag Alloys. In: Current Science (Bangalore), 42 (19). pp. 663-667.

Raman, KS and Das, ESD and Vasu, KI (1971) Clustering and solute-vacancy binding energies in Al-4.4% Zn alloy with 0.01% ternary additions. In: Journal of Materials Science, 6 (11). pp. 1367-1378.

Raman, KS and Das, ESD and Vasu, KI (1970) Clustering phenomena in Al-4.4 at. % Zn alloy with 0.03 and 0.08 at. % Ag additions. In: Journal of Materials Science, 5 (2). pp. 105-116.

Raman, KS and Das, ESD and Vasu, KI (1970) Reversion phenomenon in Al-4.4Zn and Al-4.4Zn-0.08Ag alloys by resistometry. In: Scripta Metallurgica, 4 (3). pp. 197-201.

Raman, KS and Das, ESD and Vasu, KI (1970) Values of Solute-Vacancy Binding Energy In Aluminium Matrix for Ag, Be, Ce, Dy, Fe, Li, Mn, Nb, Pt, Sb, Si, Y and Yb. In: Scripta Metallurgica, 4 (4). pp. 291-293.

Raman, Thulasi KH and Kiran, MSRN and Ramamurty, U and Rao, Mohan G (2012) Structural and mechanical properties of room temperature sputter deposited CrN coatings. In: MATERIALS RESEARCH BULLETIN, 47 (12). pp. 4463-4466.

Ramanarayan, H and Abinandanan, TA (2004) Grain boundary effects on spinodal decomposition II. Discontinuous microstructures. In: Acta Materialia, 52 (4). pp. 921-930.

Ramanarayan, H and Abinandanan, TA (2003) Phase field study of grain boundary effects on spinodal decomposition. In: Acta Materialia, 51 (16). pp. 4761-4772.

Ramanarayan, H and Abinandanan, TA (2003) Spinodal decomposition in fine grained materials. In: Bulletin Of Materials Science, 26 (1). pp. 189-192.

Ramanarayan, H and Abinandanan, TA (2003) Spinodal decomposition in polycrystalline alloys. In: Physica A: Statistical Mechanics and its Applications, 318 (1-2). pp. 213-219.

Ramani, K and Sathyavathiamma, MP and Puttaswamy, NG and Mallya, RM (1983) Mossbauer-Effect Study Of The Thermal-Decomposition In Hydrogen Of Homogeneously Mixed Ferrous Nickel Oxalates With Different Iron To Nickel Ratios. In: Physica Status Solidi A, 77 (1). pp. 87-96.

Ramani, K and Sathyavathiyamma, MP and Puttaswamy, NG and Mallya, RM (1983) Mossbauer Effect Study of the Thermal Decomposition in Hydrogen of Homogeneously Mixed Ferrous Nickel Oxalates with Different Iron to Nickel Ratios. In: Physica Status Solidi A, 77 (1). pp. 87-96.

Ramaraju, K and Prasad, YVRK and Vasu, KI (1972) Slip structure and Crack Growth during Fatigue in Aluminum and Aluminum-1% Magnesium. In: Metallography, 5 (3). pp. 265-273.

Ramasesha, SK and Jacob, KT (1989) Studies on nonisothermal solid state galvanic cells — effect of gradients on EMF. In: Journal of Applied Electrochemistry, 19 (3). pp. 394-400.

Ramasesha, SK and Jacob, KT (1988) X-ray and IR characterisation of Nasicon solid solution, Na1+xZr2SixP3−xO12. In: Materials Letters, 7 (1-2). pp. 61-64.

Ramasesha, SK and Mathews, Tom and Jacob, KT (1990) High temperature Seebeck measurements on $YBa_2Cu_3O_{7-\delta}$. In: Materials Research Bulletin, 25 (2). pp. 149-155.

Ramasesha, SK and Mathews, Tom and Jacob, KT (1990) High temperature seebeck measurements on YBa2Cu3O7-δ. In: Materials Research Bulletin, 25 (2). pp. 149-155.

Ramasesha, Sheela K and Jacob, KT (1989) EMF of a nonisothermal cell incorporating a mixed conductor. In: Journal of the Electrochemical Society, 136 (9). pp. 2720-2723.

Ramasesha, Sheela K and Jacob, KT (1990) EMF of bielectrolyte solid state cells with different mobile ions in each phase. In: Electrochimica Acta, 35 (4). pp. 785-789.

Ramasesha, Sheela K and Jacob, KT (1990) Effect of hole localization on Madelung potential of YBa2Cu3O7. In: Materials Letters, 10 (6). pp. 239-242.

Ramasesha, Sheela K and Jacob, Thomas K (1991) Madelung energy and hole location in YBa2Cu4O8. In: Journal of Materials Chemistry, 1 (3). pp. 477-478.

Ramesam, J and Rao, MR and Anantharaman, TR (1962) Electron-metallographic studies of precipitation in an aluminium-zinc-magnesium alloy. In: Proceedings of the Indian Academy of Sciences - Section A, 55 (2). pp. 121-129.

Ramesh, R and Ravikumar, K and Kishore, * (1986) Wear of En 31 steel. In: Transactions of the Indian Institute of Metals, 39 (4). pp. 329-334.

Ramesh, R and Kishore, * and Rao, RMVGK (1983) Dry wear studies on glass-fiber-reinforced epoxy composites. In: Wear, 89 (2). pp. 131-136.

Ranganathan, S (1990) Coincidence-site lattices, superlattices and quasilattices. In: Transactions of the Indian Institute of Metals, 43 (1). pp. 1-7.

Ranganathan, S (2001) Yashoda's vision: Microscopy at all levels. In: Mrs Bulletin, 26 (2). p. 127.

Ranganathan, S and Alok, Singh and Mayer, J and Urban, K (1989) Electron diffraction patterns from the Al-Mn decagonal phase. In: Philosophical Magazine Letters, 60 (6). pp. 261-267.

Ranganathan, S and Chattopadhyay, K (1989) Decagonal quasicrystals. In: informaworld, 16 (1-4). pp. 67-83.

Ranganathan, S and Hajra, JP (1987) Alloy oxide equilibrium in the $Cr-Mn-O$ system. In: Bulletin of Materials Science, 9 (2). pp. 149-158.

Ranganathan, S and Lord, EA (2008) Parallelohedra and topological transitions in cellular structures. In: Philosophical Magazine Letters, 88 (9-10). pp. 703-713.

Ranganathan, S and Prasad, R and Mukhopadhyay, NK (1989) Electron microscopy and diffraction of icosahedral twins in an aluminium—manganese alloy. In: Philosophical Magazine Letters, 59 (6). pp. 257-263.

Ranganathan, S and Roy, B (1993) Coincidence site lattices revisited. In: Indo-US workshop on Interfaces, 1993, pp. 21-31.

Ranganathan, S and Singh, Alok and Mayer, J and Urban, K (1989) Electron diffraction patterns from the aluminum-manganese decagonal phase. In: Philosophical Magazine Letters, 60 (6). pp. 261-267.

Ranganathan, S and Subramaniam, A and Tsai, AP and Dong, C (2001) BCC derivative structures and their relation to rational approximants to quasicrystals. In: Aperiodic 2000 Conference, 4-8 July 2000, Nijmegen, Netherlands, pp. 201-206.

Ranganathan, S (2003) Alloyed pleasures: Multimetallic cocktails. In: Current Science, 85 (5). pp. 1404-1406.

Ranganathan, S (2001) Basic-research in engineering materials - Indian perspectives. In: Transactions of the Indian Institute of Metals, 54 (1-2). pp. 1-12.

Ranganathan, S (2000) Infrastructure in S&T in India. In: Current Science, 78 (8). p. 941.

Ranganathan, S (2001) It takes two to tango: New quasicrystals and novel superconductors. In: Current Science, 80 (6). pp. 729-732.

Ranganathan, S (1994) Quasicrystals:Indian research accomplishments and imperatives. In: Current Science (Bangalore), 67 (1). 884-886 .

Ranganathan, S and Divakar, R and Raghunathan, VS (2001) Interface Structures in Nanocrystalline Materials. In: Scripta Materialia, 44 (8-9). pp. 1169-1174.

Ranganathan, S and Hajra, JP (1989) Activities of manganese in Co-Mn-Cr alloys at 1323 K. In: Scripta Metallurgica, 23 (7). pp. 1049-1052.

Ranganathan, S and Hajra, JP (1988) Thermodynamic measurements of b.c.c. Cr-Mn solid solutions at 1373 K. In: Scripta Metallurgica, 22 (1). 13 -16.

Ranganathan, S and Inoue, A (2006) An application of Pettifor structure maps for the identification of pseudo-binary quasicrystalline intermetallics. In: Acta Materialia, 54 (14). pp. 3647-3656.

Ranganathan, S and Kaplan, WD (2006) Advanced Materials and Characterization: Proceedings of the Brandon Symposium. In: Journal of Materials Science, 41 (23). pp. 7667-7668.

Ranganathan, S and Lord, EA and Mukhopadhyay, NK and Singh, Alok (2007) A symmetrical indexing scheme for decagonal quasicrystals analogous to Miller-Bravais indexing of hexagonal crystals. In: Acta Crystallographica Section A, 63 (1). pp. 1-10.

Ranganathan, S and Murty, BS and Nagarajan, R and Chattopadhyay, K (1996) Nanostructured titanium-nickel alloys: a comparison of processing routes. In: Symposium on Processing and Properties of Nanocrystalline Materials, at the Materials Week 95, 29 Oct.-2 Nov. 1995, Cleveland, Ohio; USA.

Ranganathan, S and Ramakrishnan, K and Kulkarni, UD and Mukhopadhyay, NK (2000) On the relationship between cubic crystalline coincidence site lattices and quasiperiodic superlattices. In: Materials Science and Engineering A, 294-29 . pp. 429-433.

Ranganathan, S and Singh, Alok (1996) Indexing of decagonal quasicrystals I. The T8-phase. In: Philosophical Magazine A, 74 (4). pp. 821-840.

Ranganathan, S and Singh, Alok and Tsai, AP (2002) Frank's 'cubic' hexagonal phase: an intermetallic cluster compound as an example. In: Philosophical Magazine Letters, 82 (1). pp. 13-19.

Ranganathan, S and Singh, Alok K and Tendeloo, van G (1991) Quasicrystals and their crystalline homologues in the Al–Mn–Cu ternary alloys. In: Philosophical Magazine A , 64 (2). pp. 413-427.

Ranganathan, S and Srivastava, AK and Lord, EA (2006) Coincidence-site lattices as rational approximants to irrational twins. In: Journal of Materials Science, 41 (23). pp. 7696-7703.

Ranganathan, S and Subramaniam, Anandh (2003) Orthorhombic rational approximants for decagonal quasicrystals. In: Bulletin of Materials Science, 26 (6). pp. 627-631.

Ranganathan, S and Subramaniam, Anandh and Ramakrishnan, K (2001) Rational approximant structures to decagonal quasicrystals. In: Materials Science and Engineering A, 304-30 . pp. 888-891.

Ranganathana, S and Singhb, Alok and Mukhopadhyaya, NK and Weatherlya, GC (1994) A comparative study of zone axis pattern maps from decagonal phases with varying periodicity. In: Scripta Metallurgica et Materialia, 30 (3). pp. 271-276.

Rangaraj, L and Divakar, C and Jayaram, V (2004) Reactive Hot Pressing of Titanium Nitride–Titanium Diboride Composites at Moderate Pressures and Temperatures. In: Journal Of The American Ceramic Society, 87 (10). pp. 1872-1878.

Rangaraj, Lingappa and Barman, Kanika and Divakar, Canchi and Jayaram, Vikram (2013) Reactive hot pressing of Ti-B-C and Ti-C at 1200 degrees C. In: Ceramics International, 39 (5). pp. 5955-5961.

Rangaraj, Lingappa and Divakar, Canchi and Jayaram, Vikram (2010) Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing. In: Journal of the European Ceramic Society, 30 (1). pp. 129-138.

Rangaraj, Lingappa and Divakar, Canchi and Jayaram, Vikram (2010) Reactive hot pressing of ZrB2-ZrCx ultra-high temperature ceramic composites with the addition of SiC particulate. In: Journal of the European Ceramic Society, 30 (15). pp. 3263-3266.

Rangaraj, Lingappa and Suresha, Siriyara J and Divakar, Canchi and Jayaram, Vikram (2008) Low-Temperature Processing of ZrB2-ZrC Composites by Reactive Hot Pressing. In: Symposium on Materials Behavior - Far from Equilibrium, DEC 15-16, 2006, Bombay.

Ranjan, Rajeev and Garg, Rohini and Kothai, V and Agrawal, Anupriya and Senyshyn, Anatoliy and Boysen, Hans (2010) Phases in the (1-x)Na0.5Bi0.5TiO3-(x)CaTiO3 system. In: Journal of Physics: Condensed Matter, 22 (7).

Ranjan, Rajeev and Kalyani, Ajay Kumar and Garg, Rohini and Krishna, PSR (2009) Structure and phase transition of the (1-x)PbTiO3-(x)BiAlO3 system. In: Solid State Communications, 149 (45-46). pp. 2098-2101.

Ranjan, Rajeev and Kothai, V and Garg, Rohini and Agrawal, Anupriya and Senyshyn, Anatoliy and Boysen, Hans (2009) Degenerate rhombohedral and orthorhombic states in Ca-substituted Na0.5Bi0.5TiO3. In: Applied Physics Letters, 95 (4). 04290-1-04290-3.

Ranjan, Rajeev and Kothai, V and Senyshyn, Anatoliy and Boysen, Hans (2011) Neutron diffraction study of the coupling between spin, lattice, and structural degrees of freedom in 0.8BiFeO(3)-0.2PbTiO(3). In: Journal of Applied Physics, 109 (6).

Ranjan, Rajeev and Nabi, Hasan Sadat and Pentcheva, Rossitza (2009) First principles study of magnetism in divalent Eu perovskites. In: Journal Of Applied Physics, 105 (5). 053905-1-053905-4.

Ranjan, Rajeev and Raju, Appala K (2010) Unconventional mechanism of stabilization of a tetragonal phase in the perovskite ferroelectric (PbTiO3)(1-x)(BiFeO3)(x). In: Physical Review B: Condensed Matter and Materials Physics, 82 (5).

Ranjan, Rajeev and Singh, Sanjay and Boysen, Hans and Trots, Dmytro and Banik, S and Awasthi, AM and Mukhopadhyay, PK and Barman, SR (2009) Competing tetragonal and monoclinic phases in Ni2.2Mn0.80Ga. In: Journal Of Applied Physics, 106 (3). 033510-1-033510-8.

Ranjith, K and Swathi, SK and Kumar, Prajwal and Ramamurthy, Praveen C (2012) Dithienylcyclopentadienone derivative-co-benzothiadiazole: An alternating copolymer for organic photovoltaics. In: Solar Energy Materials and Solar Cells, 98 . pp. 448-454.

Ranjith, K and Swathi, SK and Kumar, Prajwal and Ramamurthy, Praveen C (2011) Pulsed laser deposition film of a donor-acceptor-donor polymer as possible active layer in devices. In: Journal of Materials Science (full set), 46 (7). pp. 2259-2266.

Ranjith, K and Swathi, SK and Malavika, A and Ramamurthy, Praveen C (2012) Random copolymers consisting of dithienylcyclopentadienone, thiophene and benzothiadiazole for bulk heterojunction solar cells. In: SOLAR ENERGY MATERIALS AND SOLAR CELLS, 105 . pp. 263-271.

Ranjith, R and Nikhil, R and Krupanidhi, SB (2006) Interfacial coupling and its size dependence in PbTiO3 and PbMg1/3Nb2/3O3 multilayers. In: Physical Review B, 74 (18).

Rao, CNR and Parkash, Om (1977) Anderson transitions in Ln1-xSrxCoO3 (Ln=Pr or Nd). In: Philosophical Magazine, 35 (4). pp. 1111-1117.

Rao, K Narasimha and Kashyap, Sanjay (2006) Preparation and Characterization of Indium Oxide and Indium Tin Oxide Films by Activated Reactive Evaporation. In: Surface Review and Letters, 13 (2-3). pp. 221-225.

Rao, KP and Doraivelu, SM and Roshan, HM and Prasad, YVRK (1983) Deformation processing of an aluminum alloy containing particles: Studies on AI-5 pct Si alloy 4043. In: Metallurgical and Materials Transactions A, 14 (8). pp. 1671-1679.

Rao, M and Yelloji, K and Natarajan, KA (1986) Electrochemical behavior of sulfide minerals under open-circuit conditions. In: Transactions of the Indian Institute of Metals, 39 (6). pp. 582-591.

Rao, Sambasiva G and Prasad, YVRK (1983) Changes in texture and grain size in hot rolled magnesium and effect on yield strength. In: Bulletin of Materials Science, 5 (5). pp. 459-464.

Rao, TVLN and Bhat, MV and Sastry, DH (1996) Corrosion and stress corrosion behaviour of an Mg-Li-Al alloy in presence of inhibitors in aqueous environment. In: British Corrosion Journal, 31 (1). pp. 44-48.

Rao, Yelloji MK and Natarajan, KA (1988) Electrochemical aspects of grinding media-mineral interaction on sulphide flotation. In: Bulletin of Materials Science, 10 (5). pp. 411-422.

Rao, BS and Hemambar, C and Pathak, AV and Patel, KJ and Rodel, J and Jayaram, V (2006) Al/SiC carriers for microwave integrated circuits by a new technique of pressureless infiltration. In: IEEE Transactions on Electronics Packaging Manufacturing, 29 (1). pp. 58-63.

Rao, Badari Narayana and Datta, Ranjan and Chandrashekaran, Selva S and Mishra, Dileep K and Sathe, Vasant and Senyshyn, Anatoliy and Ranjan, Rajeev (2013) Local structural disorder and its influence on the average global structure and polar properties in Na0.5Bi0.5TiO3. In: PHYSICAL REVIEW B, 88 (22).

Rao, Badari Narayana and Fitch, Andy N and Ranjan, Rajeev (2013) Ferroelectric-ferroelectric phase coexistence in Na1/2Bi1/2TiO3. In: PHYSICAL REVIEW B, 87 (6).

Rao, Badari Narayana and Ranjan, Rajeev (2012) Electric-field-driven monoclinic-to-rhombohedral transformation in Na1/2Bi1/2TiO3. In: PHYSICAL REVIEW B, 86 (13).

Rao, Bhogeswara D and Jacob, KT (1982) SOS films and interfaces: chemical aspects. In: Journal of Crystal Growth, 58 (1). pp. 79-86.

Rao, Bhogeswara D and Nelson, Howard G and Jacob, KT (1983) Corrosion of 310 stainless steel in H2 H2O-H2S gas mixtures; studies at constant temperature and fixed oxygen potential. In: Metallurgical and Materials Transactions A, 14 (1). pp. 295-305.

Rao, CNR and Govindaraj, A and Aiyer, Hemantkumar N and Seshadri, Ram (1995) Polymerization and Pressure-Induced Amorphization of C60 and C70. In: Journal of Physical Chemistry, 99 (46). pp. 16814-16816.

Rao, GS and Prasad, YVRK (1983) Contribution of texture to the strengthening and fracture in hot-rolled magnesium-12.7 at % cadmium alloy. In: Journal of Materials Science, 18 (8). pp. 2385-2392.

Rao, GS and Prasad, YVRK (1983) Grain boundary strengthening in hot rolled magnesium-5 at.% thallium: Importance of texture. In: Scripta Metallurgica, 17 (1). pp. 147-151.

Rao, Hanumantha K and Natarajan, KA and Forssberg, KSE and Sharma, PK (2001) Surface chemical characterisation of Paenibacillus polymyxa before and after adaptation to sulfide minerals. In: International Journal of Mineral Processing, 62 (1-4). pp. 3-25.

Rao, KP and Prasad, YVRK and Sivaram, K (1990) Deformation processing map for control of microstructure in Al---4Mg alloy. In: Materials Letters, 10 (1-2). pp. 66-70.

Rao, MPLN and Gupta, GS and Manjunath, P and Kumar, S and Suri, AK and Krishnamurthy, N and Subramanian, C (2009) Temperature measurements in the boron carbide manufacturing process - A hot model study. In: International Journal of Refractory Metals and Hard Materials, 27 (3). pp. 621-628.

Rao, Prakash S and Tripathy, Sushree S and Raichur, Ashok M (2007) Dispersion studies of sub-micron zirconia using Dolapix CE 64. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 302 (1-3). pp. 553-558.

Rao, Rama P and Anantharaman, TR (1962) Elastic anisotropy and lattice strain in deformed cobalt powder. In: Philosophical Magazine, 7 (76). pp. 705-707.

Rao, Rama P and Anantharaman, TR (1962) Incidence of heavy deformation faulting in f.c.c. alloys. In: Acta Metallurgica, 10 (12). p. 1192.

Rao, S and Narayana, BV and Subramanian, S (1997) Optimization studies on limestone beneficiation. In: Indian Journal of Engineering and Materials Sciences, 4 (4). pp. 139-144.

Rao, Sambasiva G and Prasad, YVRK (1983) Strengthening mechanisms in hot-rolled magnesium and magnesium alloys. In: Materials Letters, 1 (5-6). pp. 171-174.

Rao, Srinivasa B and Jayaram, V (2001) New technique for pressureless infiltration of Al alloys into Al2O3 preforms. In: Journal of Materials Research, 16 (10). pp. 2906-2913.

Rao, Srinivasa B and Jayaram, V (2001) Pressureless Infiltration of Al–Mg Based Alloys into $Al_2O_3$ Preforms: Mechanisms and Phenomenology. In: Acta Materialia, 49 (13). pp. 2373-2385.

Rao, Vaman D and Narayanan, MK and Nayak, UB and Ananthapadmanabhan, K and Somasundaran, P (1985) Flotation of calcareous Mussorie phosphate ore. In: International Journal of Mineral Processing, 14 (1). pp. 57-66.

Rao, Yelloji MK and Natarajan, KA (1989) Effect of Galvanic Interaction between Grinding Media and Minerals on Sphalerite Fotation. In: International Journal of Mineral Processing, 27 (1-2). pp. 95-109.

Rao, Yelloji MK and Natarajan, KA (1990) Effect of electrochemical interactions among sulphide minerals and grinding medium on the flotation of sphalerite and galena. In: International Journal of Mineral Processing, 29 (3). pp. 175-194.

Rao, Yelloji MK and Natarajan, KA (1989) Electrochemical Effects of Mineral-Mineral Interactions on the Flotation of Chalcopyrite and Sphalerite. In: International Journal of Mineral Processing, 27 (3-4). pp. 279-293.

Rao, Yelloji MK and Natarajan, KA (1988) Influence of galvanic interaction between chalcopyrite and some metallic materials on flotation. In: Minerals Engineering, 1 (4). pp. 281-294.

Rapheal, G and Kumar, S and Blawert, C and Dahotre, Narendra B (2010) Laser Surface Alloying of a Creep Resistant Magnesium Alloy MRI 230D with Al and Al2O3. In: Magnesium Technology Symposium 2010, FEB 14-18, 2010, Seattle, WA, pp. 161-166.

Rapheal, G and Kumar, S and Blawert, C and Dahotre, Narendra B (2011) Wear behavior of plasma electrolytic oxidation (PEO) and hybrid coatings of PEO and laser on MRI 230D magnesium alloy. In: Wear, 271 (9-10, ). pp. 1987-1997.

Rath, RK and Subramanian, S (1999) Effect of guar gum on selective separation of sphalerite from galena by flotation. In: Transactions Of The Institution Of Mining And Metallurgy Section C-Mineral Processing And Extractive Metallurgy, 108 . C1-C7.

Rath, RK and Laskowski, JS and Subramanian, S (1999) Interaction of guar gum with hydrophobic solids. In: 3rd UBC-McGill Bi-Annual International Symposium on Fundamentals of Mineral Processing held at the 38th Annual Conference of Metallurgists of CIM, AUG 17-19, 1999, Quebec, Canada.

Rath, RK and Subramanian, S (1999) Adsorption, electrokinetic and differential flotation studies on sphalerite and galena using dextrin. In: International Journal of Mineral Processing, 57 (4). pp. 265-283.

Rath, RK and Subramanian, S (1997) Studies on adsorption of guar gum onto biotite mica. In: Minerals Engineering, 10 (12). pp. 1405-1420.

Rath, RK and Subramanian, S and Laskowski, JS (1997) Adsorption of dextrin and guar gum onto talc. A comparative study. In: Langmuir, 13 (23). pp. 6260-6266.

Rath, RK and Subramanian, S and Pradeep, T (2000) Surface chemical studies on pyrite in the presence of polysaccharide-based flotation depressants. In: Journal of Colloid and Interface Science, 229 (1). pp. 82-91.

Rath, Rajendra Kumar and Subramanian, S (1998) Surface chemical studies on mica and galena using dextrin. In: Langmuir, 14 (15). pp. 4005-4010.

Ravi, R and Kumar, AK and Paul, A (2010) Diffusion Studies in A(3)B Compounds with A15 Structure. In: 5th International Conference on Diffusion in Solids and Liquids, JUN 24-26, 2009, Rome.

Ravi, R and Prasad, YVRK and Sarma, VVS and Raidu, RS (2006) Artificial neural network model for predicting stable and unstable regions in Cu-Zn alloys. In: Materials and Manufacturing Processes, 21 (8). pp. 756-760.

Ravi, M and Pillai, UTS and Pai, BC and Damodaran, AD and Dwarakadasa, ES (2002) The effect of mischmetal addition on the structure and mechanical properties of a cast Al-7Si-0.3Mg alloy containing excess iron (up to 0.6 Pct). In: Metallurgical and Materials Transactions A, 33 (2). pp. 391-400.

Ravi, M and Pillai, UTS and Pai, BC and Damodaran, AD and Dwarakadasa, ES (1996) A study of the influence of mischmetal additions to Al-7Si-0.3Mg (LM 25/356) alloy. In: Metallurgical and Materials Transactions A, 25 (7). pp. 1283-1292.

Ravi, R and Paul, A (2012) Diffusion mechanism in the gold-copper system. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 23 (12). pp. 2152-2156.

Ravi, R and Paul, A (2011) Interdiffusion study on Co(W) solid solution and topological close-packed mu phase in Co-W system. In: Intermetallics, 19 (3). pp. 426-428.

Ravi, R and Prasad, YVRK and Sarma, VVS (2003) Development of Expert Systems for the Design of a Hot-Forging Process Based on Material Workability. In: Journal of Materials Engineering and Performance, 12 (6). pp. 646-652.

Ravi, Raju and Paul, Aloke (2012) Diffusion and growth mechanism of phases in the Pd-Sn system. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 23 (12). pp. 2306-2310.

Ravichandran, KS and Rao, Venkata HC and Dwarakadasa, ES and Nair, Krishnadas CG (1987) Microstructural effects and crack closure during near-threshold fatigue crack propagation in a high-strength steel. In: Metallurgical and Materials Transactions A, 18 (6). pp. 865-876.

Ravichandran, N and Prasad, YVRK (1991) Dynamic recrystallization during hot deformation of aluminum: A study using processing maps. In: Metallurgical and Materials Transactions A, 22 (10). pp. 2339-2348.

Ravichandran, KS (1991) A rationalisation of fatigue thresholds in pearlitic steels using a theoretical model. In: Acta Metallurgica et Materialia, 39 (6). 1331-1341 .

Ravichandran, KS (1990) A theoretical model for roughness induced crack closure. In: International Journal of Fracture, 44 (2). pp. 97-110.

Ravichandran, KS and Dwarakadasa, ES (1990) Effects of temper level on the dependence of fatigue crack growth threshold and crack closure on the prior austenitic grain size. In: Metallurgical Transactions. Physical Metallurgy and Material, 21 (12). pp. 3171-3186.

Ravichandran, KS and Dwarakadasa, ES (1987) Effects of tempered structure on the near threshold fatigue crack growth behavior of a coarse grained high strength steel. In: Engineering Fracture Mechanics, 28 (4). pp. 435-444.

Ravichandran, KS and Dwarakadasa, ES (1989) Fatigue crack growth transitions in Ti-6Al-4V alloy. In: Scripta Metallurgica, 23 (10). pp. 1685-1690.

Ravichandran, KS and Dwarakadasa, ES (1991) Micromechanics Of Fatigue Crack-Growth At Low Stress Intensities In A High-Strength Steel. In: Transactions of the Indian Institute of Metals, 44 (5). 375 -396.

Ravichandran, KS and Dwarakadasa, ES (1991) Theoretical Modelling of the Effects of Grain Size on the Threshold for Fatigue Crack Growth. In: Acta Metallurgica et Materialia, 39 (6). pp. 1343-1357.

Ravichandran, KS and Dwarakadasa, ES and Banerjee, D (1991) Mechanisms of cleavage during fatigue crack growth in $Ti-6Al-4V$ alloy. In: Scripta Metallurgica et Materialia, 25 (9). pp. 2115-2120.

Ravichandran, KS and Panchapagesan, TS and Kishore, * and Dwarakadasa, ES (1987) The effect of crack closure on the grain size dependence of fatigue crack growth threshold. In: Scripta Metallurgica, 21 (7). pp. 919-924.

Ravichandran, MV and Prasad, Krishna R and Dwarakadasa, ES (1992) Fracture toughness evaluation of aluminium 4% $M_g-AI_20_3$ liquid-metallurgy particle composite. In: Journal of Materials Science Letters, 11 (8). 452 -456.

Ravichandran, N and Prasad, YVRK (1993) Characteristics of Dynamic Recrystalization Domain in the Processing Map for Hot-Working of OFHC Coper. In: Zeitschrift für Metallkunde, 84 (2). pp. 132-139.

Ravichandran, N and Prasad, YVRK (1992) Influence of oxygen on dynamic recrystallization during hot working of polycrystalline copper. In: Materials Science and Engineering A, 156 (2). pp. 195-204.

Ravichandrana, KS and Dwarakadasaa, ES (1986) Some Considerations on the Occurrence of Intergranular Fracture during Fatigue Crack growth in Steels. In: Materials Science and Engineering A, 83 (1). L11 -L16.

Ravikiran, A and Jayaram, V and Biswas, SK (1997) Sliding wear of Al2O3-SiC-(Al,Si) composites against a steel counterface. In: Journal of the American Ceramic Society, 80 (1). pp. 219-224.

Ravikiran, A and Natarajan, KN and Biswas, SK and Bai, Pramila BN (1990) Erosion studies on hyper steel and high chrome cast iron. In: Wear, 141 (1). pp. 85-94.

Ravikiran, A and Surappa, MK (1997) Effect of sliding speed on wear behaviour of A356 Al-30 wt.% $SiC_p MMC$. In: Wear, 206 (1-2). pp. 33-38.

Ravikiran, A and Surappa, MK (1997) Effect of sliding speed on wear behaviour of A356 Al-30 wt.%SiCp MMC. In: Wear, 206 (1-2). pp. 33-38.

Ravikiran, A and Surappa, MK (1997) Oscillations in coefficient of friction during dry sliding of A356 Al-30% wt SiCp MMC against steel. In: Scripta Materialia, 36 (1). pp. 95-98.

Ravindra, A and Bandyopadhyay, Amit and Dwarakadasa, ES and Srivatsan, TS (1994) Influence of hydrogen charging on mechanical properties of gas tungsten arc weldments of aluminium-lithium alloy 8090. In: Journal of Materials Science, 29 (5). pp. 1203-1212.

Ravindra, A and Dwarakadasa, ES (1992) Effect of post-weld heat treatment on mechanical properties of gas-tungsten arc welds of Al-Li alloy 8090. In: Journal of Materials Science Letters, 11 (22). pp. 1543-1546.

Ravindra, A and Dwarakadasa, ES and Srivatsan, TS and Ramanath, C and Iyengar, KVV (1993) Electron-beam weld microstructures and properties of aluminium-lithium alloy 8090. In: Journal of Materials Science (full set), 28 (12). pp. 3173-3182.

Ravindran, A and Singh, A and Raichur, AM and Chandrasekaran, N and Mukherjee, A (2010) Studies on interaction of colloidal Ag nanoparticles with Bovine Serum Albumin (BSA). In: Colloids and Surfaces B: Biointerfaces, 76 (1). pp. 32-37.

Ravindran, Aswathy and Elavarasi, M and Prathna, TC and Raichur, AshokM and Chandrasekaran, N and Mukherjee, Amitava (2012) Selective colorimetric detection of nanomolar Cr (VI) in aqueous solutions using unmodified silver nanoparticles. In: SENSORS AND ACTUATORS B-CHEMICAL, 166 . pp. 365-371.

Raviprasad, K and Aoki, K and Chattopadhyay, K (1993) The nature of dislocations and effect of order in rapidly solidified Fe-(5.5-7.5)wt.%Si alloys. In: Materials Science and Engineering A, 172 (1-2). pp. 125-135.

Raviprasad, K and Chattopadhyay, K (1992) Continuous ordering below the tricritical point: A critical test for the kinetic pathway in Fe-12at.% Si alloy. In: Philosophical Magazine Letters, 65 (5). pp. 255-259.

Raviprasad, K and Chattopadhyay, K (1993) The Influence of Critical Points and Structure and Microstructural Evolution in Iron Rich Fe-Si Alloys. In: Acta Metallurgica et Materialia, 41 (2). pp. 609-624.

Raviprasad, K and Chattopadhyay, K (1988) The effect of rapid solidification on the order-disorder transformation in iron-based alloys. In: Materials Science and Engineering, 98 . pp. 281-284.

Raviprasad, K and Chattopadhyay, K (1995) The nature of the fringe contrast from the shear APBs in ordered Fe-12.2 at.%Si alloy. In: Scripta Metallurgica et Materialia, 32 (7). pp. 1049-1054.

Raviprasad, K and Ranganathan, S and Chattopadhyay, K (1992) On the Influence of Tricritical Point on the Microstructural Evolution in Fe-Ge System. In: Scripta Metallurgica et Materialia, 26 (3). pp. 467-472.

Raviprasad, K and Ravishankar, N and Chattopadhyay, K and Umemoto, M (1998) Magnetic hardening mechanism in nanocrystalline $Nd_2Fe_{14}B$ with 0.1 at. % addition of Cr, Cu, or Zr. In: Journal of Applied Physics, 83 (02). pp. 916-920.

Raviprasad, K and Tenwick, M and Davies, HA and Chattopadhyay, K (1986) The Nature of Ordered Structures in Melt Spun Iron-Silicon Alloys. In: Scripta Metallurgica, 20 (9). pp. 1265-1270.

Ravishankar, N and Abinandanan, TA and Chattopadhyay, K (2001) Application of effective potential formalism to mechanical alloying in Ag–Cu and Cu–Fe systems. In: Materials Science and Engineering A, 304-30 . pp. 413-417.

Ravishankar, N and Park, J and Aoki, K and Masumoto, T and Chattopadhyay, K (1999) Microstructural evolution and giant magnetoresistance in melt spun and annealed Cu-85(FeCo)(15) alloy. In: Journal of Applied Physics, 86 (5). pp. 2733-2738.

Ray, A and Bhattacharya, V and Chattopadhyay, K (2005) Evolution of morphology of undercooled droplets in Cu-Cu3p near euteictic alloy. In: Transactions of the Indian Institute of Metals, 58 (4). pp. 761-767.

Ray, AK and Roy, N and Dash, B and Das, DK and Ranganath, VR and Goswami, B and Singh, MP and Tiwari, YN and Roy, PK and Das, HK and Sanyal, D and Dwarakadasa, ES (2006) High temperature mechanical properties of thermal barrier coated superalloy applied to combustor liner of aero engines. In: High temperature materials and processes, 25 (3). pp. 109-119.

Ray, AK and Das, G and Mukhopadhyay, NK and Bhattacharya, DK and Dwarakadasa, ES and Parida, N (1999) Studies on indentation fracture toughness on ceramic and ceramic composite using acoustic emission technique. In: Bulletin of Materials Science, 22 (1). pp. 25-32.

Ray, AK and Dwarakadasa, ES and Das, DK and Ranganath, VR and Goswam, B and Sahu, JK and Whittenberger, JD (2007) Fatigue behavior of a thermal barrier coated superalloy at $800 ^0 C$. In: Materials Science and Engineering: A, 448 (1-2). pp. 294-298.

Ray, AK and Dwarakadasa, ES and Raman, KS (1986) Effect of porosity and slag inclusions on the fatigue fracture behaviour of 15CDV6 butt welds. In: Journal of Materials Science Letters, 5 (8). pp. 765-768.

Ray, Ashok Kumar and Goswami, Bangsidhar and Singh, Mahendra Prasad and Das, Deepak Kumar and Roy, Nilima and Dash, Byomkesh and Kumar, Ravi B and Ray, Ajoy Kumar and Das, Gautam and Rupa, Karuna Purnapu P and Parida, Narayan and Das, Arpan and Swaminathan, Jagannathan and Dwarakadasa, Eshwarahalli (2006) Characterization of bond coat in a thermal barrier coated superalloy used in combustor liners of aero engines. In: Materials Characterization, 57 (3). pp. 137-210.

Ray, PK and Chattopadhyay, K and Murty, BS (2008) Influence of thermodynamics and local geometry on glass formation in Zr based alloys. In: Applied Physics Letters, 93 (6). 061903-1-061903-3.

Ray, SK and Rodriguez, P and Sastry, DH (1993) Deformation dynamics of SS-316 Between 1023-K TO 1223-K In The Framework of Cottrell-Stokes Law. In: Transactions of the Indian Institute of Metals, 46 (1). pp. 31-39.

Ray, SK and Rodriguez, P and Sastry, DH (1993) Method of Analysis if Uniaxial Deformation Data. In: Transactions of the Indian Institute of Metals, 46 (1). pp. 7-19.

Ray, SK and Sasikala, G and Rodriguez, P and Sastry, DH (1993) Continuity of plastic strain rate in stress relaxation tests. In: Materials Science and Technology, 9 (12). pp. 1079-1085.

Reddy, Ravindra S and Hajra, JP (1994) Thermodynamics and Phase Equilibria in the In-Sb System. In: Calphad, 18 (1). pp. 39-45.

Reddy, Ravindra S and Hajra, JP (1993) Thermodynamics and phase equilibria in the Ga---Sb system. In: Materials Science and Engineering B, 20 (3). pp. 308-311.

Reddy, Ravindra S and Hajra, Jnan P (1993) Thermodynamics and phase equilibria in the system Ga---In using multi-parameter functions. In: Calphad, 17 (2). pp. 151-156.

Reddy, SNS and Leonard, DN and Wiggins, LB and Jacob, KT (2005) Internal Displacement Reactions in Multicomponent Oxides: Part I. Line Compounds with Narrow Homogeneity Range. In: Metallurgical and Materials Transactions A, 36A (10). pp. 2695-2703.

Reddy, SNS and Leonard, DN and Wiggins, LB and Jacob, KT (2005) Internal Displacement Reactions in Multicomponent Oxides: Part II. Oxide Solid Solutions of Wide Composition Range. In: Metallurgical and Materials Transactions A, 36A (10). pp. 2695-2703.

Reddy, SNS and Sundlof, Brian R and Jacob, KT (2011) Diffusion path during internal displacement reactions in multi-component oxides: Reaction between Fe and (Co,Mg)TiO3 solid solution at 1273 K. In: Solid State Ionics, 182 (1). pp. 1-7.

Reddy, SNS. and Jacob, KT and Rajitha, G (2012) Reactive Interdiffusion: A Method for Making Composition Graded Metal-ceramic Composites. In: HIGH TEMPERATURE MATERIALS AND PROCESSES, 31 (2). pp. 97-103.

Riyazulla, MS and Gundewar, CS and Haran, NP and Subramanian, S and Thomas, J (2006) Mineralogical and electron microprobe studies on the cobalt sample from Kalyadi copper deposit, Hassan district, Karnataka. In: Proc. International Seminar on Mineral Processing Technology (MPT 2006) and Indo-Korean Workshop on Resource Recycling, 2006, Indo-Korean.

Rohatgi, K and Rohatgi, PK (1980) A delphi study on health in future India. In: Journal fo Scientific and Industrial Research, 39 (7). pp. 359-363.

Rohatgi, PK and Bhutani, AK and Abraham, KP (1979) Directional solidification of aluminum-nickel eutectic alloys using electroslag remelting. In: Metallurgical Transactions. Physical Metallurgy and Material, 10 (3). pp. 333-342.

Rohatgi, PK and Murali, N and Shetty, HR and Chandrashekhar, R (1976) Improved damping capacity and machinability of graphite particle-aluminum alloy composites. In: Materials Science and Engineering, 26 (1). pp. 115-122.

Rohatgi, PK and Pai, BC (1980) Seizure resistance of cast aluminium alleys containing dispersed graphite particles of differing sizes. In: Wear, 59 (2). pp. 323-332.

Roy, Shibayan and Suwas, Satyam and Tamirisakandala, S and Srinivasan, R and Miracle, DB (2009) Processing Response of Boron Modified Ti-6Al-4V Alloy In (alpha plus beta) Working Regime. In: 138th TMS Annual Meeting and Exhibition, FEB 15-19, 2009, San Francisco.

Roy, Aashis S and Gupta, Satyajit and Seethamraju, Sindhu and Madras, Giridhar and Ramamurthy, Praveen C (2014) Impedance spectroscopy of novel hybrid composite films of polyvinylbutyral (PVB)/functionalized mesoporous silica. In: COMPOSITES PART B-ENGINEERING, 58 . pp. 134-139.

Roy, Aashis S and Gupta, Satyajit and Sindhu, S and Parveen, Ameena and Ramamurthy, Praveen C (2013) Dielectric properties of novel PVA/ZnO hybrid nanocomposite films. In: COMPOSITES PART B-ENGINEERING, 47 . pp. 314-319.

Roy, Aashish and Parveen, Ameena and Deshpande, Raghunandan and Bhat, Ravishankar and Koppalkar, Anilkumar (2013) Microscopic and dielectric studies of ZnO nanoparticles loaded in ortho-chloropolyaniline nanocomposites. In: Journal of Nanoparticle Research, 15 (1). 1337_1-1337_11.

Roy, Debdutta and Buravalla, V and Mangalgiri, PD and Allegavi, S and Ramamurty, U (2008) Mechanical characterization of NiTi SMA wires using a dynamic mechanical analyzer. In: Materials Science and Engineering A, 494 (1-2). pp. 429-435.

Roy, Nilima and Godiwalla, Kersi M and Dwarakadasa, Eswarahalli S and Ray, Ashok Kumar (2004) Elasto-plastic deformation in thermal barrier coated superalloys. In: Scripta Materialia, 51 (7). 739 -743.

Roy, Shibayan and Gurao, Nilesh and Suwas, Satyam and Tamirisakandala, S and Srinivasan, R and Miracle, DB (2009) Texture Evolution in Boron Modified Ti-6Al-4V Alloy. In: 15th International Conference on Textures of Materials, JUN 01-06, 2008, Pittsburgh, PA, pp. 585-592.

Roy, Shibayan and Karanth, S and Suwas, Satyam (2013) Microstructure and texture evolution during sub-transus thermo-mechanical processing of Ti-6Al-4V-0.1B alloy: part II. static annealing in (alpha plus beta) regime. In: Metallurgical and Materials Transactions A, 44A (7). pp. 3322-3336.

Roy, Shibayan and Madhavan, R and Suwas, Satyam (2014) Crystallographic texture and microstructure evolution during hot compression of Ti-6Al-4V-0.1B alloy in the (alpha plus beta)-regime. In: PHILOSOPHICAL MAGAZINE, 94 (4). pp. 358-380.

Roy, Shibayan and Nataraj, BR and Suwas, Satyam and Kumar, S and Chattopadhyay, K (2012) Accumulative roll bonding of aluminum alloys 2219/5086 laminates: Microstructural evolution and tensile properties. In: Materials & Design, 36 . pp. 529-539.

Roy, Shibayan and Nataraj, BR and Suwas, Satyam and Kumar, S and Chattopadhyay, K (2012) Microstructure and texture evolution during accumulative roll bonding of aluminium alloys AA2219/AA5086 composite laminates. In: JOURNAL OF MATERIALS SCIENCE, 47 (17). pp. 6402-6419.

Roy, Shibayan and Sarkar, Apu and Suwas, Satyam (2010) On characterization of deformation microstructure in Boron modified Ti-6Al-4V alloy. In: Materials Science and Engineering: A, 528 (1). pp. 449-458.

Roy, Shibayan and Singh, Satyaveer D and Suwas, Satyam and Kumar, S and Chattopadhyay, K (2011) Microstructure and texture evolution during accumulative roll bonding of aluminium alloy AA5086. In: Materials Science and Engineering A, 528 (29-30). pp. 8469-8478.

Roy, Shibayan and Suwas, Satyam (2013) Deformation mechanisms during superplastic testing of Ti-6Al-4V-0.1B alloy. In: Materials Science and Engineering: A, 574 . pp. 205-217.

Roy, Shibayan and Suwas, Satyam (2013) Microstructure and texture evolution during sub-transus thermomechanical processing of Ti-6Al-4V-0.1B alloy: part I. hot rolling in (alpha plus beta) phase field. In: Metallurgical and Materials Transactions A, 44A (7). pp. 3303-3321.

Roy, Shibayan and Suwas, Satyam (2014) On the absence of shear cracking and grain boundary cavitation in secondary tensile regions of Ti-6Al-4V-0.1B alloy during hot (alpha plus beta)-compression. In: PHILOSOPHICAL MAGAZINE, 94 (5). pp. 447-463.

Roy, Shibayan and Suwas, Satyam (2013) The influence of temperature and strain rate on the deformation response and microstructural evolution during hot compression of a titanium alloy Ti-6Al-4V-0.1B. In: JOURNAL OF ALLOYS AND COMPOUNDS, 548 . pp. 110-125.

Roy, Shibayan and Suwas, Satyam and Tamirisakandala, S and Miracle, DB and Srinivasan, R (2011) Development of solidification microstructure in boron-modified alloy Ti-6Al-4V-0.1B. In: Acta Materialia, 59 (14). pp. 5494-5510.

Roy, Shibayan and Suwas, Satyam and Tamirisakandala, S. and Srinivasan, R. and Miracle, D. B. (2012) Microstructure and texture evolution during beta extrusion of boron modified Ti-6A1-4V alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 540 . pp. 152-163.

Roy, Shibayan and Tungala, Vedavyas and Suwas, Satyam (2011) Effect of Hypoeutectic Boron Addition on the beta Transus of Ti-6Al-4V Alloy. In: Metallurgical and Materials Transactions A, 42A (9). pp. 2535-2541.

Roy, Soumitra and Divinski, Sergiy V and Paul, Aloke (2014) Reactive diffusion in the Ti-Si system and the significance of the parabolic growth constant. In: PHILOSOPHICAL MAGAZINE, 94 (7). pp. 683-699.

Roy, Soumitra and Paul, Aloke (2013) Diffusion in tungsten silicides. In: Intermetallics, 37 . pp. 83-87.

Roy, Soumitra and Paul, Aloke (2014) Growth of hafnium and zirconium suicides by reactive diffusion. In: MATERIALS CHEMISTRY AND PHYSICS, 143 (3). pp. 1309-1314.

Royan, Saraswathy and Bhattacharya, DL (2008) Some cytoplasmic details of yeast revealed by the electron microscope. In: Journal of Indian Institute of Science, 88 (3). pp. 793-794.

S

Saadatfar, M and Mukherjee, M and Madadi, M and Schroeder-Turk, G E and Garcia-Moreno, F and Schaller, F M and Hutzler, S and Sheppard, A P and Banhart, J and Ramamurty, U (2012) Structure and deformation correlation of closed-cell aluminium foam subject to uniaxial compression. In: ACTA MATERIALIA, 60 (8). pp. 3604-3615.

Sabapathy, Tamilarasan and Kiran, MSRN and Ayiriveetil, Arunbabu and Kar, Ajoy K and Ramamurty, U and Asokan, Sundarrajan (2013) Nanoindentation studies on waveguides inscribed in chalcogenide glasses using ultrafast laser. In: Optical Materials Express, 3 (6). pp. 684-690.

Sabat, RK and Hatwal, S and Dixit, B and Suwas, Satyam (2013) Evolution of microstructure during hot deformation of pearlitic steel. In: 5th International Conference on Recrystallization and Grain Growth (ReX&GG V), MAY 05-10, 2013 , Sydney, AUSTRALIA, pp. 459-462.

Sagar, PK and Banerjee, D and Muraleedharan, K and Prasad, YVRK (1996) High-temperature deformation processing of Ti-24Al-20Nb. In: Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 27 (9). pp. 2593-2604.

Sagar, PK and Banerjee, D and Prasad, YVRK (1997) Unstable flow during hot deformation of Ti-24Al-20Nb alloy. In: Materials Science and Technology, 13 (9). pp. 755-760.

Sagar, PK and Prasad, YVRK (1998) Hot deformation and microstructural evolution in an alpha(2)/O titanium aluminide alloy Ti-25Al-15Nb. In: Zeitschrift für Metallkunde, 89 (6). pp. 433-441.

Saha, BP and Johnson, R and Jayaram, V (2012) COMPARATIVE EVALUATION OF THERMAL CONDUCTIVITY OF ZIRCONIA SOLID AND HONEYCOMB STRUCTURES. In: EXPERIMENTAL HEAT TRANSFER, 25 (4). pp. 267-281.

Saha, RL and Jacob, KT and Misra, RDK and Nandy, TK (1990) Metal mould reactions during casting of titanium in zircon sand moulds. In: Transactions of the American Foundrymen's Society, 98 . pp. 253-260.

Saha, RL and Mukherji, D and Misra, RDK and Jacob, KT and Nandy, TK (1991) Zircon Sand--a Viable Alternative Moulding System for Titanium Castings. In: Transactions of the Indian Institute of Metals, 44 (1). pp. 53-61.

Saha, RL and Nandy, TK and Misra, RDK and Jacob, KT (1991) Microstructural changes induced by ternary additions in a hypo-eutectic titanium-silicon alloy. In: Journal of Materials Science (full set), 26 (10). pp. 2637-2644.

Saha, RL and Nandy, TK and Misra, RDK and Jacob, KT (1990) On the evaluation of stability of rare earth oxides as face coats for investment casting of titanium. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 21 (3). pp. 559-566.

Saha, RL and Nandy, TK and Misra, RDK and Jacob, KT (1991) Reduction In Metal-Mold Reactivity In Titanium Castings Through The Use Of Sodium Aluminate As Binder In Zircon Sand Molds. In: Transactions of the Indian Institute of Metals, 44 (4). pp. 305-310.

Sahana, M and Singh, RN and Shivakumara, C and Vasanthacharya, NY and Hegde, MS and Subramanian, S and Prasad, V and Subramanyam, SV (1997) Colossal magnetoresistance in epitaxial $La_(_1_-_x_-_y_)$$Na_y$$MnO_3$ thin film. In: Applied Physics Letters, 70 (21). pp. 2909-2911.

Sahaym, Uttara and Talebanpour, Babak and Seekins, Sean and Dutta, Indranath and Kumar, Praveen and Borgesen, Peter (2013) Recrystallization and Ag3Sn Particle Redistribution During Thermomechanical Treatment of Bulk Sn-Ag-Cu Solder Alloys. In: IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 3 (11). pp. 1868-1875.

Sahoo, Subash Chandra and Sinha, Shashi Bhushan and Kiran, MSRN and Ramamurty, Upadrasta and Dericioglu, Arcan F and Reddy, Malla C and Naumov, Pance (2013) Kinematic and Mechanical Profile of the Self-Actuation of Thermosalient Crystal Twins of 1,2,4,5-Tetrabromobenzene: A Molecular Crystalline Analogue of a Bimetallic Strip. In: JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 135 (37). pp. 13843-13850.

Sahu, KK and Lahiri, AK (2004) Finding the insphere of a convex polyhedron: an analytical approach. In: Philosophical Magazine, 84 (12). pp. 1185-1196.

Sainathan, N and Padmanabhan, K and Sashidhara, S and Rao, RMVGK (1995) Influence of Particulate Graphite Additions on the Shear Related Behaviour of Glass Fabric Reinforced Epoxy Composites. In: Journal of Reinforced Plastics and Composites, 14 (5). pp. 445-457.

Saito, M and Jacob, KT and Waseda, Y (1999) Local environmental structures of Mo in the superionic conducting glass (AgI)(0.6)(Ag2MoO4)(0.4) by anomalous X-ray scattering. In: High Temperature Materials and Processes, 18 (1-2). pp. 21-26.

Saito, M and Sugiyama, K and Matsubara, E and Jacob, KT and Waseda, Y (1995) Anomalous X-ray scattering study of local structures in the superionic conducting class (CuI)(0.3)(Cu2O)(0.35)(MoO3)(0.35). In: Materials Transactions, JIM, 36 (12). pp. 1434-1439.

Saito, M and Wakeshima, M and Sato, N and Fujino, T and Waseda, Y and Matsubara, E and Jacob, KT (1994) The structure of amorphous platinum disulfide as studied by anomalous x-ray-scattering. In: Zeitschrift für Naturforschung - A, 49 (11). 1031-1036 .

Samajdar, S and Kishore, * (1991) Fracture surface characterization of epoxy-based GFRP laminates. In: Journal of Materials Science, 26 (4). pp. 977-984.

Samant, Anoop N and Du, Baoshuai and Paital, Sameer and Kumar, S and Dahotre, Narendra B (2009) Pulsed laser surface treatment of magnesium alloy: Correlation between thermal model and experimental observations. In: Journal of Materials Processing Technoogy, 209 (11). pp. 5060-5067.

Sampath, V and Dwarakadasa, ES (1992) Effect Of Electroslag Refining On Microstructure And Mechanical-Properties Of Is-7670 Alloy. In: Scandinavian Journal of Metallurgy, 21 (6). pp. 266-278.

Sampath, V and Dwarakadasa, ES (1993) A Study of The Fatigue, Impact and fracture-Toughness Characteristics of Electroslag Refined IS-7670 Alloy. In: Canadian Metallurgical Quarterly, 32 (1). pp. 57-67.

Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2008) Processes-Induced Structural Transformations and the Impact Properties of Cr-Mn Iron Systems. In: Materials and Manufacturing Processes, 23 (3). pp. 320-325.

Sampathkumaran, P and Seetharamu, S and Murali, A and Kumar, RK (1999) Dry Sliding Wear Behavior of Glass-Epoxy Composite. In: Journal of Reinforced Plastics and Composites, 18 (1). pp. 55-62.

Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2011) Chromium-manganese iron alloy system design cast in metal and sand moulds for erosion resistance: a positron lifetime study. In: International Journal of Advanced Manufacturing Technology, 52 (1-4). pp. 45-52.

Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2008) Effect of increased manganese addition and mould type on the slurry erosion characteristics of Cr-Mn iron systems. In: Bulletin of Materials Science, 31 (7). pp. 1001-1006.

Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2009) The effects of manganese content and mould size on abrasion and slurry erosion behaviour of chromium-manganese iron systems investigated by positron lifetime spectroscopy. In: Wear, 267 (9-10). pp. 1558-1565.

Sampathkumaran, P and Seetharamu, S and Murali, A and Kumar, RK and Kishore, * (1998) Sliding wear studies in glass-epoxy system through scanning microscopic observations. In: Bulletin of Materials Science, 21 (4). pp. 335-339.

Sankaranarayanan, S and Sabat, RK and Jayalakshmi, S and Suwas, S and Gupta, M (2013) Effect of hybridizing micron-sized Ti with nano-sized SiC on the microstructural evolution and mechanical response of Mg-5.6Ti composite. In: Journal of Alloys and Compounds, 575 . pp. 207-217.

Sankaranarayanan, S and Sabat, RK and Jayalakshmi, S and Suwas, S and Gupta, M (2014) Microstructural evolution and mechanical properties of Mg composites containing nano-B4C hybridized micro-Ti particulates. In: MATERIALS CHEMISTRY AND PHYSICS, 143 (3). pp. 1178-1190.

Sankarasubramanian, R and Jog, CS and Abinandanan, TA (1999) Symmetry-breaking transitions in equilibrium shapes of isolated, coherent particles in cubic crystals. In: Proceedings of the International Conference on Solid-Solid Phase Transformations '99, 24-28 May 1999, Kyoto, Japan, pp. 709-712.

Sankarasubramanian, R and Jog, CS and Abinandanan, TA (2002) Symmetry-breaking transitions in equilibrium shapes of coherent precipitates: Effect of elastic anisotropy and inhomogeneity. In: Metallurgical and Materials Transactions A, 33 (4). pp. 1083-1090.

Santhiya, D and Subramanian, S and Natarajan, KA and Malghan, SG (1999) Adsorption and electrokinetic studies on alumina suspensions using poly(vinyl alcohol). In: Minerals & Metallurgical Processing, 16 (2). pp. 51-55.

Santhiya, D and Nandini, G and Subramanian, S and Natarajan, KA and Malghan, SG (1998) Effect of polymer molecular weight on the adsorption of polyacrylic acid at the alumina-water interface. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 133 (1-2). pp. 1572-163.

Santhiya, D and Subramanian, S and Natarajan, KA (2000) Surface Chemical Studies on Galena and Sphalerite in the Presence of Thiobacillus Thiooxidans with Reference to Mineral Beneficiation. In: Minerals Engineering, 13 (7). pp. 747-763.

Santhiya, D and Subramanian, S and Natarajan, KA (2001) Surface Chemical Studies on Sphalerite and Galena Using Bacillus polymyxa I. Microbially Induced Mineral Separation. In: Journal of Colloid and Interface Science, 235 (2). pp. 289-297.

Santhiya, D and Subramanian, S and Natarajan, KA (2001) Surface Chemical Studies on Sphalerite and Galena Using Bacillus polymyxa II. Mechanisms of Microbe–Mineral Interactions. In: Journal of Colloid and Interface Science, 235 (2). pp. 298-309.

Santhiya, D and Subramanian, S and Natarajan, KA (2002) Surface chemical studies on sphalerite and galena using extracellular polysaccharides isolated from Bacillus polymyxa. In: Journal of Colloid and Interface Science, 256 (2). pp. 237-248.

Santhiya, D and Subramanian, S and Natarajan, KA and Malghan, SG (2000) Surface chemical studies on alumina suspensions using ammonium poly(methacrylate). In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 164 (2-3). pp. 143-154.

Santhiya, D and Subramanian, S and Natarajan, KA and Malghan, SG (1999) Surface chemical studies on the competitive adsorption of poly(acrylic acid) and poly(vinyl alcohol) onto alumina. In: Journal of Colloid and Interface Science, 216 (1). pp. 143-153.

Santhiya, D and Subramanian, S and Natarajan, KA and Rao, Hanumantha K and Forssberg, KSE (2001) Bio-modulation of galena and sphalerite surfaces using Thiobacillus thiooxidans. In: International Journal of Mineral Processing, 62 (1-4). pp. 121-141.

Santosh, Vani and Kumar, VR Praveen and Thota, Balaram and Shastry, Arun and Arivazhagan, A and Thennarasu, K and Kondaiah, Paturu (2013) CRITICAL ROLE OF IGFBP ISOFORMS AND THEIR DOWNSTREAM SIGNALING PATHWAYS IN GLIOBLASTOMA PATHOGENESIS. In: NEURO-ONCOLOGY, 15 (3). p. 162.

Santra, Sangeeta and Mondal, Avik and Paul, Aloke (2012) Interdiffusion in the Fe-Pt System. In: Metallurgical and Materials Transactions A, 43A (3). pp. 791-795.

Santra, Sangeeta and Paul, Aloke (2013) Effect of Ti concentration on the growth of Nb3Sn between solid Nb(Ti) and liquid Sn. In: Journal of Electronic Materials, 42 (8). pp. 2716-2723.

Santra, Sangeeta and Paul, Aloke (2012) Vacancy wind effect on interdiffusion in a dilute Cu(Sn) solid solution. In: PHILOSOPHICAL MAGAZINE LETTERS, 92 (8). pp. 373-383.

Sar, DK and Nanda, KK (2010) Melting and superheating of nanowires-a nanotube approach. In: Nanotechnology, 21 (20).

Saravanan, L and Subramanian, S (2005) Surface chemical studies on the competitive adsorption of poly(ethylene glycol) and ammonium poly(methacrylate) onto alumina. In: Journal of Colloid and Interface Science, 284 (2). pp. 363-377.

Saravanan, RA and Samajdar, I and Surappa, MK (1998) Microstructural characterisation of the subsurface plastic zone formed during erosion of A356 AI alloy and composites. In: Wear, 215 (1-2). pp. 223-231.

Saravanan, RA and Surappa, MK (2000) Fabrication and characterisation of pure magnesium-30 vol.% $SiC_P$ particle composite. In: Materials Science & Engineering A, 276 (1-2). pp. 108-116.

Saravanan, RA and Surappa, MK and Bai, BNP (1997) Erosion of A356 $Al-SiC_{\mu}$ composites due to multiple particle impact. In: Wear, 202 (2). pp. 154-164.

Saravanan, S and Mathai, Joseph C and Anantharaman, MR and Venkatachalam, S and Avasthi, DK and Singh, F (2005) Photoluminescence studies on RF plasma-polymerized thin films. In: Synthetic Metals, 155 (2). pp. 311-315.

Saravanan, S and Srinivas, Hari G and Jayaram, V and Paulraj, M and Asokan, S (2008) Synthesis and characterization of $Y_3Al_5O_{12}$ and $ZrO_2–Y_2O_3$ thermal barrier coatings by combustion spray pyrolysis. In: Surface and Coatings Technology, 202 (19). pp. 4653-4659.

Sarkar, A and Barat, P (2008) Effect of Meditation on Scaling Behavior and Complexity of Human Heart Rate Variability. In: Fractals (FRACTALS), 16 (3). pp. 199-208.

Sarkar, J and Prasad, YVRK and Surappa, MK (1993) The constitutive flow behavior of 6061Al-SiCp composites at elevated temperature. In: International Conference on Composite Material, 1993, pp. 240-246.

Sarkar, S and Gupta, GS (2007) Development of a Two-Dimensional Mathematical Model for Stress and Velocity Distribution in a Packed Bed. In: Metallurgical and Materials Transactions B, 38 (6). pp. 965-975.

Sarkar, Sabita and Gupta, Govind Sharan and Kitamura, Shin-ya (2007) Prediction of raceway shape and size. In: ISIJ International, 47 (12). pp. 1738-1744.

Sarkar, Apu and Bhowmik, Ayan and Suwas, Satyam (2009) Microstructural characterization of ultrafine-grain interstitial-free steel by X-ray diffraction line profile analysis. In: Applied Physics A-Materials Science & Processing, 94 (4). pp. 943-948.

Sarkar, Apu and Roy, Shibayan and Suwas, Satyarn (2011) X-ray diffraction line profile analysis of deformation microstructure in boron modified Ti-6Al-4V alloy. In: Materials Characterization, 62 (1). pp. 35-42.

Sarkar, J (1995) Aspects of strengthening and work hardening in particulate metal matrix composites. In: Scripta Metallurgica et Materialia, 32 (1). pp. 37-42.

Sarkar, J and Prasad, YVRK and Surappa, MK (1995) Optimization of hot workability of an Al-Mg-Si alloy using processing maps. In: Journal of Materials Science (full set), 30 (11). pp. 2843-2848.

Sarkar, S and Gupta, GS (2006) Theoretical study of stress distribution under gas cross flow condition. In: ICAMMP-2006, 3rd to 5th Feb 2006, IIT Kharagpur, India.

Sarkar, S and Gupta, GS (2008) Two-Dimensional Mathematical Modeling of the Pack Carburizing Process. In: Metallurgical and Materials Transactions A, 39 (10). pp. 2424-2434.

Sarkar, S and Gupta, GS and Litster, JD and Rudolph, V and White, ET and Choudhary, SK (2003) A cold model study of raceway hysteresis. In: Metallurgical and Materials Transactions B, 34 (2). pp. 183-191.

Sarvamangala, H and Gopal, J and Muraleedharan, P and George, RP and Dayal, RK and Natarajan, KA (2008) Biomineralization of manganese by Bacillus spp isolated from a marine biofilm. In: Minerals and Metallurgical Processing, 25 (3). pp. 149-155.

Sarvamangala, H and Natarajan, KA (2009) Microbially induced flotation of galena and quartz from pyrite. In: 18th International Biohydrometallurgy Symposium Bariloche, SEP 13-17, 2009, Bariloche, ARGENTINA, pp. 509-512.

Sarvamangala, H and Braun, JJ and Natarajan, KA and Subramanian, S (2006) A strategy for isolation, culturing and maintenance of Acidithiobacillus ferrooxidans and Leptospirillum ferrooxidans for enhanced bioleaching. In: Proc. International Seminar on Mineral Processing Technology (MPT 2006) and Indo-Korean Workshop on Resource Recycling, 2006, Indo-Korean.

Sarvamangala, H and Natarajan, KA (2011) Microbially induced flotation of alumina, silica/calcite from haematite. In: International Journal of Mineral Processing, 99 (1-4). pp. 70-77.

Sarvamangala, H and Natarajan, KA and Girisha, ST (2013) Microbially-induced pyrite removal from galena using Bacillus subtilis. In: International Journal of Mineral Processing, 120 . pp. 15-21.

Sastri, P and Lahiri, AK (1983) A 'central atoms' model for binary silicate and aluminate melts. In: Physics and Chemistry of Glasses, 24 (4). pp. 98-103.

Sastri, P and Lahiri, AK (1985) Applicability of central atoms models to binary silicate and aluminate melts. In: Metallurgical and Materials Transactions B, 16 (2). 325 -331.

Sastri, P and Lahiri, AK (1986) "Central Atoms" models for ternary silicate and alumino-silicate melts. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 17 (1). pp. 105-110.

Sastry, DH and Murthy, Gunturi S (1986) Impression creep behavior of metals at high temperatures. In: Transactions of the Indian Institute of Metals, 39 (4). pp. 369-379.

Sastry, DH and Shastry, CV and Tangri, K (1977) Is there an athermal region of plastic flow in metals at intermediate temperatures? In: Philosophical Magazine, 35 (4). 1099 -1103.

Sastry, DH and Prasad, YVKR and Vasu, KI (1970) Reply to comments on 'STacking fault energies of close-packed hexagonal metals'. In: Scripta Metallurgica, 4 (5). pp. 347-348.

Sastry, DH and Prasad, YVRK and Deevi, SC (2001) Influence of temperature and strain rate on the flow stress of an FeAl alloy. In: Materials Science and Engineering A, 299 (1-2). 157 -163.

Sastry, DH and Prasad, YVRK and Vasu, KI (1971) Low-temperature deformation behaviour of polycrystalline copper. In: Journal of Materials Science, 6 (12). pp. 1433-1440.

Sastry, DH and Prasad, YVRK and Vasu, KI (1969) On the low temperature deformation mechanism in polycrystalline cadmium. In: Acta Metallurgica, 17 (12). pp. 1453-1457.

Sastry, DH and Prasad, YVRK and Vasu, KI (1969) On the stacking fault energies of some close-packed hexagonal metals. In: Scripta Metallurgica, 3 (12). pp. 927-929.

Sastry, DH and Prasad, YVRK and Vasu, KI (1971) An evaluation of rate-controlling obstacles for low-temperature deformation of zirconium. In: Journal of Materials Science, 6 (4). pp. 332-341.

Sastry, DH and Prasad, YVRK and Vasu, KI and Rao, P Rama (1973) On the orientation of grain boundaries in cadmium recrystallized during hot deformatio. In: Journal of Materials Science, 8 (10). pp. 1517-1519.

Sastry, DH and Prasad, YVRK and Vasu, KI and Rao, PR (1973) Orientation Of Grain-Boundaries In Cadmium Recrystallized During Hot Deformation. In: Journal of Materials Science, 8 (10). pp. 1517-1519.

Sastry, DH and Shastry, CV (1979) Cottrell-Stokes law during high temperature deformation of alpha-iron. In: Physica Status Solidi A, 53 (1). K5-K7.

Sastry, DH and Vasu, KI (1972) Dislocation dynamics in alpha titanium Dynamique des dislocations dans le titane alphaVersetzungsdynamik in alpha-Titan. In: Acta Metallurgica, 20 (3). pp. 399-405.

Sastry, GSSRK and Gupta, GS and Lahiri, AK (2003) Cold model study of raceway under mixed particle conditions. In: Ironmaking & Steelmaking, 30 (1). pp. 61-65.

Sastry, GSSRK and Gupta, GS and Lahiri, AK (2003) Void formation and breaking in a packed bed. In: ISIJ International, 43 (2). pp. 153-160.

Sastry, SD and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1980) Preparation and Mechanical Processing of Fe -- 12Cr-6Al Ferritic Stainless Steel. In: Metals Technology, 7 (OCT). 393-396 .

Sastry, Srinivas D and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1982) Influence of heat treatment on the strength and fracture behaviour of Fe-12Cr-6Al ferritic stainless steel. In: Journal of Materials Science, 17 (10). pp. 3009-3016.

Sastry, Srinivas D and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1979) Mechanism of strengthening in high temperature treated Fe---12Cr---6Al ferritic stainless steel. In: Scripta Metallurgica, 13 (9). pp. 817-822.

Satapathy, LN and Chokshi, AH (2005) Microstructural Development and Creep Deformation in an Alumina-5% Yttrium Aluminum Garnet Composite. In: Journal of The American Ceramic Society, 88 (10).

Satapathy, LN and Chokshi, AH (2003) Effect of spinel second phase on high temperature deformation in alumina. In: Materials Science Forum, 447-4 . pp. 341-345.

Satapathy, LN and Kottada, RS and Chokshi, AH (1999) An Experimental Technique For Fabricating Tensile Ceramic Specimens. In: Scripta Materialia, 41 (10). pp. 1091-1095.

Satapathy, LN and Swaroop, S (2005) Role of small amount of MgO and $ZrO_{2}$ on creep behaviour of high purity $Al_{2}O_{3}$. In: Bulletin of Materials Science, 28 (3). pp. 281-285.

Satyalakshmi, KM and Mallya, RM and Ramanathan, KV and Wu, XD and Brainard, B and Gautier, DC and Vasanthacharya, NY and Hegde, MS (1993) Epitaxial metallic LaNiO3 thin films grown by pulsed laser deposition. In: Applied Physics Letters, 62 (11). pp. 1233-1235.

Satyalakshmi, KM and Manoharan, Sundar S and Hegde, MS and Prasad, V and Subramanyam, SV (1995) Enhanced magnetoresistance in as?deposited oxygen?deficient La0.6Pb0.4MnO3-y thin films. In: Journal of Applied Physics, 78 (11). pp. 6861-6863.

Satyam, Suwas and Roxane, Arruffat-Massion and Toth, Laszol S and Jean-Jacques, Fundenberger and Andre, Eberhardt and Werner, Skrotzki (2006) Evolution of Crystallographic Texture during Equal Channel Angular Extrusion of Copper: The Role of Material Variables. In: Metallurgical and Materials Transactions A, 37 (3). pp. 739-753.

Sau, A and Lahiri, AK (1997) On the asymmetry of flow through a bifurcated channel. In: Acta Mechanica, 124 (1-4). pp. 79-88.

Schuh, Christopher A and Hufnagel, Todd C and Ramamurty, Upadrasta (2007) Overview No.144 - Mechanical behavior of amorphous alloys. In: Acta Materialia, 55 (12). pp. 4067-4109.

Schuh, Christopher A and Hufnagel, Todd C and Ramamurty, Upadrasta (2007) Mechanical behavior of amorphous alloys. In: Acta Materialia, 55 (12). pp. 4067-4109.

Seethamraju, Sindhu and Ramamurthy, Praveen C and Madras, Giridhar (2013) Flexible poly(vinyl alcohol-co-ethylene)/modified MMT moisture barrier composite for encapsulating organic devices. In: RSC Advances, 3 (31). pp. 12831-12838.

Seethamraju, Sindhu and Ramamurthy, Praveen C and Madras, Giridhar (2013) Ionomer based blend as water vapor barrier material for organic device encapsulation. In: ACS Applied Materials and Interfaces, 5 (10). pp. 4409-4416.

Seetharamacharyulu, D and Pai Verneker, VR and Mallya, RM and Kumar, RN (1981) Combustion and Thermal Decomposition of Ammonium Perchlorate-Aluminium Composite Pellets: Mechanism for Aluminium Participation. In: Combustion Science And Technology, 25 (3-4). 147 -151.

Seetharamacharyulu, D and Verneker, VR Pai and Mallya, RM (1981) Combustion and Thermal Decomposition of a Binary Oxidiser System: Ammonium Perchlorate-Potassium Perchlorate. In: Combustion Science and Technology, 27 (1-2). pp. 19-30.

Seetharamacharyulu, D and Verneker, VR Pai and Mallya, RM (1982) Defect Sensitization of Combustion and Thermal Decomposition of Ammonium Perchlorate: Effect of Pelletizing Pressure and Dwell Time. In: Combustion Science and Technology, 28 (1-2). pp. 41-53.

Seetharaman, S and Abraham, KP (1969) Activity measurements in CoOMnO solid solutions. In: Scripta Metallurgica, 3 (12). pp. 911-915.

Seetharaman, S and Jacob, KT (1993) A new matched thermochemical diagram for vacuum refining of nickel and cupronickel alloys. In: Proceedings of the Paul E. Queneau International Symposium on 'Extractive Metallurgy of Copper, Nickel and Cobalt, 1993.

Seetharaman, Seshadri and Abraham, KP (1969) Activity measurements in CoO-MnO solid solutions. In: Scripta Metallurgica, 3 (12). pp. 911-915.

Sekhar, JA and Rajasekharan, T and Rao, Rama P and Parthasarathy, G and Ramkumar, S and Gopal, ESR and Lakshmi, CS and Mallya, RM (1986) Electron and x-ray diffraction studies on Al86Fe14, Al82Fe18 and Al75Fe25 quasicrystals. In: Pramana, 27 (1-2). pp. 267-273.

Sekhar, K Chandra and Subramanian, S and Modak, JM and Natarajan, KA (1998) Removal of metal ions using an industrial biomass with reference to environmental control. In: International Journal of Mineral Processing, 53 (1-2). pp. 107-120.

Sekhar, Ravi K and Kishore, * and Sankaran, S (2008) Cure Behavior of Epoxy-Cyanate Ester Blend in Composite Systems: Evaluation Studies in Neat Resin Cast by Thermal and FTIR Techniques. In: Journal of Applied Polymer Science, 109 (3). pp. 2023-2028.

Selvi, SC and Modak, JM and Natarajan, KA (1998) Electrobioleaching of sphalerite flotation concentrate. In: Minerals Engineering, 11 (08). pp. 783-788.

Selvi, SC and Natarajan, KA (1998) Electrobioleaching - A novel concept for processing complex sulphide ores. In: Transacation of The Indian Institute of Metals, 51 (1). pp. 17-26.

Selvi, Ezhil V and Chatterji, Purba and Subramanian, S and Balaraju, JN (2014) Autocatalytic duplex Ni-P/Ni-W-P coatings on AZ31B magnesium alloy. In: SURFACE & COATINGS TECHNOLOGY, 240 . pp. 103-109.

Sen, Indrani and Ramamurty, U (2009) Effect of microstructure on the mechanical behavior of b-modified ti-6al-4v alloys. In: 138th TMS Annual Meeting and Exhibition, FEB 15-19, 2009, San Francisco, pp. 49-53.

Sen, Indrani and Ramamurty, U (2010) Elastic modulus of Ti-6Al-4V-xB alloys with B up to 0.55 wt.%. In: Scripta materialia, 62 (1). pp. 37-40.

Sen, Indrani (2010) Mechanical properties of B-modified Ti-6Al-4V alloys. In: 15th International Conference on the Strength of Materials (ICSMA 15), AUG 16-21, 2009 , Dresden, GERMANY.

Sen, Indrani and Gopinath, K and Datta, Ranjan and Ramamurty, U (2010) Fatigue in Ti-6Al-4V-B alloys. In: Acta Materialia, 58 (20). pp. 6799-6809.

Sen, Indrani and Kottada, Ravi Sankar and Ramamurty, U (2010) High temperature deformation processing maps for boron modified Ti-6Al-4V alloys. In: Materials Science and Engineering A, 527 (23). pp. 6157-6165.

Sen, Indrani and Maheshwari, L and Tamirisakandala, S and Miracle, DB and Ramamurty, U (2009) Micromechanisms of damage in a hypereutectic Ti-6Al-4V-B alloy. In: Materials Science and Engineering: A, 518 (1-2). pp. 162-166.

Sen, Indrani and Ramamurty, Upadrasta (2010) High-Temperature (1023 K to 1273 K 750 degrees C to 1000 degrees C]) Plastic Deformation Behavior of B-Modified Ti-6Al-4V Alloys: Temperature and Strain Rate Effects. In: Metallurgical and Materials Transactions A, 41A (11). pp. 2959-2969.

Sen, Indrani and Tamirisakandala, S and Miracle, DB and Ramamurty, U (2007) Microstructural effects on the mechanical behavior of B-modified Ti–6Al–4V alloys. In: Acta Materialia, 55 (15). 4983 -4993.

Senbhagaraman, S and Guru, Row TN and Umarji, AM (1989) Corrected spacegroup for M0.5Ti2P3O12 compounds. In: Solid State Communications, 71 (7). pp. 609-611.

Seo, Jong-Hyun and Yoon, Sang-Won and Chae, Keun-Hwa and Park, Jong-Keuk and Song, Jong-Han and Lee, Kon-Bae and Jayaram, Vickram and Seong, Tae-Yeon and Kwon, Hoon and Ahn, Jae-Pyoung (2012) Hardness and Nitrogen Bonding Structure of A(x)Ti(1-x)N/CrN Multilayer Hard Coating. In: JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 12 (2). pp. 1581-1584.

Serrao, Claudy Rayan and Sahu, Jyoti Ranjan and Ghosh, Anirban (2010) Charge-order driven multiferroic and magneto-dielectric properties of rare earth manganates. In: Bulletin of Materials Science, 33 (2). pp. 169-178.

Serrao, Claudy Rayan and Sahu, Jyoti Ranjan and Ghosh, Anirban (2010) Charge-order driven multiferroic and magneto-dielectric properties of rare earth manganates. In: Bulletin of Materials Science, 33 (2). pp. 169-178.

Seshadri, Ram and Rao, Krishna RV and Mallya, RM and Krishnan, RV (1988) Electron-beam melting and centrifugal splat-quenching technique for rapid solidification of titanium alloys. In: Journal of Materials Science (full set), 23 (5). pp. 1637-1642.

Shabadi, R and Kumar, S and Dwarakadasa, ES and Roven, HJ (2004) Propagative plasticity in commercial aluminium alloys. In: Transactions Of The Indian Institute Of Metals, 57 (1). pp. 61-69.

Shabadi, R and Ambat, R and Dwarakadasa, ES (2014) AZ91C magnesium alloy modified by Cd. In: MATERIALS & DESIGN, 53 . pp. 445-451.

Shabadi, R and Suwas, S and Kumar, S and Roven, HJ and Dwarkadasa, ES (2012) Texture and formability studies on AA7020 Al alloy sheets. In: Materials Science and Engineering A .

Shabadi, Rajashekhar and Kumar, Subodh and Roven, Hans J and Dwarakadasa, ES (2004) Effect of specimen condition, orientation and alloy composition on PLC band parameters. In: Materials Science and Engineering: A, 382 (1-2). pp. 203-208.

Shabadi, Rajashekhar and Kumara, Subodh and Roven, Hans J and Dwarakadasa, ES (2004) Characterisation of PLC band parameters using laser speckle technique. In: Materials Science and Engineering A, 364 (1-2). pp. 140-150.

Shabadi, Rajashekhar and Roven, Hans Jørgen and Kumar, Surendra and Dwarakadasa, ES (2002) Assessing formability of sheet metals through advanced tensile and LASER speckle analysis. In: Materials Science Forum, 396-4 . pp. 1623-1628.

Shah, SR and Chokshi, AH (1997) An investigation of the sinter-forging characteristics of alumina-magnesia composites: Implications for superplasticity. In: Materials Science Forum, Superplasticity in Advanced Materials - ICSAM-97 (243). pp. 381-385.

Shah, Sandeep and Chokshi, Atul H (1998) The significance of diffusional flow in ultrafine-grained materials. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 133 (1-2). pp. 57-61.

Shah, Sandeep R and Chokshi, Atul H and Raj, Rishi (2008) Porous Al2O3-Spinel Based Polycrystals That Resist FreeSintering. In: Journal of the American Ceramic Society, 91 (10). pp. 3451-3454.

Shankar, Amitabh and Görnerup, Märten and Seetharaman, S and Lahiri, AK (2006) Sulfide capacity of high alumina blast furnace slags. In: Metallurgical and Materials Transactions B, 37 (6). pp. 941-947.

Shankar, Amitabh and Görnerup, Mårten and Lahiri, AK and Seetharaman, S (2007) Experimental Investigation of the Viscosities in $CaO-SiO_2-MgO-Al_2O_3$ and $CaO-SiO_2-MgO-Al_2O_3-TiO_2$ Slags. In: Metallurgical and Materials Transactions B, 38 (6). pp. 911-915.

Shankar, P and Palanichamy, P and Jayakumar, T and Raj, Baldev and Ranganathan, S (2001) Nitrogen redistribution, microstructure, and elastic constant evaluation using ultrasonics in aged 316LN stainless steels. In: Metallurgical and Materials Transactions A, 32 (12). pp. 2959-2968.

Shankar, A and Gornerup, M and Lahiri, AK and Seetharaman, S (2007) Estimation of viscosity for blast furnace type slags. In: Ironmaking & Steelmaking, 34 (6). pp. 477-481.

Shankar, P and Sundararaman, D and Ranganathan, S (1994) Cr2N precipitation stages in 316LN austenitic stainless steels. In: Scripta metallurgica et materialia, 31 (5). 589 -593 .

Shankara, A and Menezes, Pradeep L and Simha, KRY and Kailas, Satish V (2008) Study of solid lubrication with $MoS_2$ coating in the presence of additives using reciprocating ball-on-flat scratch tester. In: Sadhana, 33 (3). pp. 207-220.

Sharma, Garima and Sarkar, Apu and Varshney, Jalaj and Ramamurty, U and Kumar, Ajay and Gupta, SK and Chakravartty, JK (2011) Effect of irradiation on the microstructure and mechanical behavior of nanocrystalline nickel. In: Scripta Materialia, 65 (8). pp. 727-730.

Sharma, Keshav and Sharma, Maya and Chandra, Aman and Bose, Suryasarathi (2013) Concentration Fluctuations and Segmental Dynamics in Weakly Dynamic Asymmetric Blends in the Presence of Surface-Functionalized Multiwall Carbon Nanotubes. In: MACROMOLECULAR CHEMISTRY AND PHYSICS, 214 (23). pp. 2651-2669.

Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2014) Cooperativity and Structural Relaxations in PVDF/PMMA Blends in the Presence of MWNTs: An Assessment through SAXS and Dielectric Spectroscopy. In: MACROMOLECULES, 47 (4). pp. 1392-1402.

Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2014) Size dependent structural relaxations and dielectric properties induced by surface functionalized MWNTs in poly(vinylidene fluoride)/poly(methyl methacrylate) blends. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 16 (6). pp. 2693-2704.

Sharma, Maya and Sharma, Keshav and Bose, Suryasarathi (2013) Segmental relaxations and crystallization-induced phase separation in PVDF/PMMA blends in the presence of surface-functionalized multiwall carbon nanotubes. In: Journal of Physical Chemistry B, 117 (28). pp. 8589-8602.

Sharma, Prithu and Biswas, Krishanu and Mondal, Amit Kumar and Chattopadhyay, Kamanio (2009) Size effect on the lattice parameter of KCl during mechanical milling. In: Scripta Materialia, 61 (6). pp. 600-603.

Sharma, S and Gupta, A (2010) Pt2+ Dispersed in Ce0.83Ti0.15O2-delta: Significant Improvement in PROX Activity by Ti Substitution in CeO2 in Hydrogen Rich Stream. In: Catalysis Letters, 134 (3-4). pp. 330-336.

Sharma, S and Sharma, A and Kumar, S (2012) Semi solid forming of A356 Al alloy by rapid slurry forming process. In: ICAA13: 13th International Conference on Aluminum Alloys, 4 SEP 2012, Pittsburgh.

Shashikala, AR and Raichur, AM (2002) Role of interfacial phenomena in determining adsorption of Bacillus polymyxa onto hematite and quartz. In: Colloids and Surfaces B: Biointerfaces, 24 (1). pp. 11-20.

Shastry, VV and Divya, VD and Azeem, MA and Paul, A and Dye, D and Ramamurty, U (2013) Combining indentation and diffusion couple techniques for combinatorial discovery of high temperature shape memory alloys. In: Acta Materialia, 61 (15). pp. 5735-5742.

Shastry, VV and Ramamurty, U (2013) Simultaneous measurement of mechanical and electrical contact resistances during nanoindentation of NiTi shape memory alloys. In: ACTA MATERIALIA, 61 (14). pp. 5119-5129.

Shastry, Vyasa V (2013) Temperature dependence of indentation recovery ratios in austenitic and martensitic shape memory alloys. In: Smart Materials and Structures, 22 (7). 077002_1-077002_5.

Shastry, Vyasa V and Maji, Bikas and Krishnan, Madangopal and Ramamurty, Upadrasta (2011) High-temperature deformation processing maps for a NiTiCu shape memory alloy. In: Journal of Materials Research, 26 (19). pp. 2484-2492.

Shastry, Vyasa V and Ramamurty, Upadrasta and Misra, Abha (2012) Thermo-mechanical stability of a cellular assembly of carbon nanotubes in air. In: CARBON, 50 (12). pp. 4373-4378.

Shen, YL and Ramamurty, U (2001) Constitutive Response of Passivated Copper Films: Experiments and Analyses. In: MRS Proceedings, 695 .

Shen, YL and Ramamurty, U (2003) Constitutive response of passivated copper films to thermal cycling. In: Journal of Applied Physics, 93 (3). pp. 1806-1812.

Shen, YL and Ramamurty, U (2003) Temperature-dependent inelastic response of passivated copper films: Experiments, analyses, and implications. In: Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 21 (4). pp. 1258-1264.

Shetty, Kishora and Kumar, S and Rao, Raghothama P (2009) Effect of ion nitriding on the microstructure and properties of Maraging steel (250 Grade). In: Surface and Coatings Technology, 203 (10-11). pp. 1530-1536.

Shibata, Hiroyuki and Ohta, Hiromichi and Nemoto, Takashi and Nagayama, Shun and Waseda, Yoshio and Fujii, Katsushi and Jacob, Thomas K (2010) Measurement for Thermal Effusivity of AlxGa1-xN Alloys Using Thermoreflectance with Periodic Heating. In: High Temperature Materials and Processes, 29 (5-6, S). pp. 515-522.

Shim, WW and Jacob, KT (1982) Gibbs energy formation of lead titanate. In: Canadian Metallurgical Quarterly, 21 (2). pp. 171-177.

Shim, WW and Jacob, KT (1982) Potentiometric determination of the Gibbs energies of formation of lead aluminates. In: Journal of the Electrochemical Society, 129 (5). pp. 1116-1121.

Shinoda, K and Reynales, C and Waseda, Y and Jacob, KT and Sugiyama, K (1995) An improved X-ray structural analysis for determining cation distribution in ZnFe2O4 and ZnFe2O4- Fe3O4 solid solutions. In: Journal of the Mining and Materials Processing Institute of Japan, 111 . pp. 801-806.

Shiva, Konda and Kiran, MSRN and Ramamurty, U and Asokan, S and Bhattacharyya, Aninda J (2012) A broad pore size distribution mesoporous SnO2 as anode for lithium-ion batteries. In: JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 16 (11, SI). pp. 3643-3649.

Shivamurthy, RC and Surappa, MK (2011) Tribological characteristics of A356 Al alloy-SiC(P) composite discs. In: Wear, 271 (9-10, ). pp. 1946-1950.

Shubha, HN and Venkatesha, TV and Vathsala, K and Pavitra, MK and Kumar, MK Punith (2013) Preparation of Self Assembled Sodium Oleate Monolayer on Mild Steel and Its Corrosion Inhibition Behavior in Saline water. In: ACS APPLIED MATERIALS & INTERFACES, 5 (21). pp. 10738-10744.

Siddaramanna, Ashoka and Kothai, V and Srivastava, Chandan and Ranjan, Rajeev (2014) Stabilization of metastable tetragonal phase in a rhombohedral magnetoelectric multiferroic BiFeO3-PbTiO3. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 47 (4).

Siddaramanna, Ashoka and Srivastava, Chandan and Rao, Badari Narayana and Ranjan, Rajeev (2013) Effect of crystallite size and clustering in influencing the stability of phases of a very large tetragonality ferroelectric system 0.6BiFeO(3)-0.4PbTiO(3). In: Solid State Communications, 160 . pp. 56-60.

Simha, KRY and Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2008) Friction tensor concept for textured surfaces. In: Sadhana, 33 (3). pp. 203-206.

Singh, Alok and Ranganathan, S (1996) Indexing of decagonal quasicrystals II. A comparison of zone-axis pattern maps of decagonal phases of different periodicities. In: Philosophical Magazine A, 74 (4). pp. 841-859.

Singh, RA and Jayaram, V and Biswas, SK (1999) Abrasion of $Al_{2}O_{3}-SiC-(Al,Si)$ composites made by melt oxidation. In: Journal of Materials Research, 14 (1). pp. 64-67.

Singh, V and Gupta, GS (2008) Behavior of Granular Material in Packed Bed Under Influence of Gas Injected Through a Nozzle. In: Particulate Science & Technology, 26 (3). pp. 214-221.

Singh, A and Ranganathan, S and Bendersky, LA (1997) Quasicrystalline phases and their approximants in Al-Mn-Zn alloys. In: Acta Materialia, 45 (12). pp. 5327-5336.

Singh, A and Srivastava, AK and Ranganathan, S (1993) Electron-Microscopy of Multiple Twins. In: Symposium on Microstructure of Materials, OCT 22-23, 1992 , BERKELEY, CA.

Singh, Akhilesh Vikram and Nath, Lila Kanta (2013) Evaluation of microwave assisted grafted sago starch as controlled release polymeric carrier. In: INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 60 . pp. 62-68.

Singh, Akhilesh Vikram and Nath, Lila Kanta (2013) Formulation development and evaluation of lamivudine controlled release tablets using cross-linked sago starch. In: EXPERT OPINION ON DRUG DELIVERY, 10 (2). pp. 173-182.

Singh, Alok and Ranganathan, S (1996) Indexing of decagonal quasicrystals .1. The T-8-phase. In: Philosophical Magazine A & B, 74 (4). pp. 821-840.

Singh, Alok and Ranganathan, S (1991) On the Variety of Electron Diffraction Patterns from a Face-Centred Icosahedral Quasicrystal. In: Scripta Metallurgica et Materialia, 25 (2). pp. 409-412.

Singh, Alok and Ranganathan, S (1999) On the indexing and reciprocal space of icosahedral quasicrystal. In: Journal of Materials Research, 14 (11). pp. 4182-4187.

Singh, Alok and Ranganathan, S (1997) Ordering and twinning in quasicrystals. In: Progress in Materials Science, 42 (1-4). pp. 393-407.

Singh, Alok and Ranganathan, S (1993) Quasicrystalline and crystalline phases and their twins in rapidly solidified Al-Mn-Fe alloys. In: Fourth International Conference on Quasicrystals, 31 May-5 June 1992, St. Louis, MO, USA, pp. 86-91.

Singh, Alok and Ranganathan, S (1995) Solid-state transformations involving quasicrystals. In: Materials Science and Engineering B, 32 (3). pp. 137-144.

Singh, Alok and Ranganathan, S (1995) A transmission electron microscopic study of icosahedral twins- I. Rapidly solidified Al-Mn-Fe alloys. In: Acta Metallurgica et Materialia, 43 (9). pp. 3539-3551.

Singh, Alok and Ranganathan, S (1995) A transmission electron microscopic study of icosahedral twins- II. A rapidly solidified Al-Cu-Fe alloy. In: Acta Metallurgica et Materialia, 43 (9). pp. 3553-3562.

Singh, Arvind R and Sood, AK and Jayaram, V and Biswas, SK (1998) Analysis of microresidual stresses in 6H-SiC particles within $Al_2O_3-SiC-(Al,Si)$ CMC using raman spectroscopy. In: Scripta Materialia, 38 (4). pp. 617-622.

Singh, Gaurav and Bajargan, Govind and Datta, Ranjan and Ramamurty, Upadrasta (2013) Effect of hydrogen charging on tensile properties of B-modified Ti-6Al-4V alloy. In: Materials Science and Engineering: A, 576 . pp. 326-336.

Singh, Gaurav and Gaddam, Raghuveer and Petley, Vijay and Datta, Ranjan and Pederson, Robert and Ramamurty, Upadrasta (2013) Strain-controlled fatigue in B-modified Ti-6Al-4V alloys. In: SCRIPTA MATERIALIA, 69 (9). pp. 698-701.

Singh, Gaurav and Sen, Indrani and Gopinath, K and Ramamurty, U (2012) Influence of minor addition of boron on tensile and fatigue properties of wrought Ti-6Al-4V alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 540 . pp. 142-151.

Singh, J and Wayman, Cm and Mazumder, J and Lele, S and Ranganathan, S (1988) Spinodal decomposition of a Co-Ti-Nb alloy. In: Metallurgical Transactions. Physical Metallurgy and Material, 19 (7). pp. 1703-1709.

Singh, PS and Narayan, RL and Sen, Indrani and Hofmann, DC and Ramamurty, U (2012) Effect of strain rate and temperature on the plastic deformation behaviour of a bulk metallic glass composite. In: Materials Science and Engineering: A, 534 . pp. 476-484.

Singh, R and Jacob, KT (2003) Calculation of the oxygen potential profile across solid-state electrochemical cells. In: Journal of Applied Electrochemistry, 33 (7). pp. 571-576.

Singh, RN and Shivakumara, C and Vasanthacharya, NY and Hegde, MS and Sahana, M (1997) Colossal magnetoresistance in epitaxial La(1-x-y)NayMnO3 thin film. In: Applied Physics Letters, 70 (21). pp. 2909-2911.

Singh, Ram Niwas and Shivakumara, C and Vasanthacharya, NY and Subramanian, S and Hegde, MS and Rajagopal, H and Sequiera, A (1998) Synthesis, Structure, and Properties of Sodium or Potassium-Doped Lanthanum Orthomanganites from NaCl or KCl Flux. In: Journal of Solid State Chemistry, 137 (1). pp. 19-27.

Singh, Randhir and Jacob, Thomas K (2004) Solution of transport equations in a mixed conductor––a generic approach. In: International Journal of Engineering Science, 42 (15-16). pp. 1587-1602.

Singh, SB and Goswami, R and Chattopadhyay, K (1993) Hardness behaviour of ultrafine dispersed materials with soft dispersoids: The case of rapidly solidified Zn-Bi immiscible alloy. In: Scripta Metallurgica et Materialia, 28 (12). pp. 1507-1512.

Singh, Sanjay and Maniraj, M and D'Souza, SW and Ranjan, R and Barman, SR (2010) Structural transformations in Mn2NiGa due to residual stress. In: Applied Physics Letters, 96 (8).

Singh, Sanjay and Rawat, R and Muthu, S Esakki and D'Souza, SW and Suard, E and Senyshyn, A and Banik, S and Rajput, P and Bhardwaj, S and Awasthi, AM and Ranjan, Rajeev and Arumugam, S and Schlagel, DL and Lograsso, TA and Chakrabarti, Aparna and Barman, SR (2012) Spin-Valve-Like Magnetoresistance in Mn2NiGa at Room Temperature. In: PHYSICAL REVIEW LETTERS, 109 (24).

Singh, Sarab Preet and Ranjan, Rajeev and Senyshyn, Anatoliy and Trots, Dmytro and Boysen, Hans (2009) Structural phase transition study of the morphotropic phase boundary compositions of Na0.5Bi0.5TiO3-PbTiO3. In: Journal of Physics: Condensed Matter, 21 (37).

Singh, Satyaveer D and Bhowmik, A and Biswas, S and Suwas, Satyam S and Chattopadhyay, K (2009) Evolution of crystallographic texture during Equal Channel Angular Extrusion (ECAE) of brass. In: in Texture and Microstructure of Steels and Some Other Materials, 2009, London.

Singh, Shailesh K and Chattopadhyay, K and Dutta, Pradip (2012) Friction Welding of Thixocast A356 Aluminium Alloy. In: http://dx.doi.org/10.4028/www.scientific.net/SSP.192-193.305 , OCT 08-11, 2012 , Cape Town, SOUTH AFRICA, pp. 305-310.

Singh, V and Gupta, GS (2006) Behaviour of granular material in packed bed under influence of gas injected through a nozzle. In: Proc. CHoPS-05, 2006, Sorrento, Italy.

Singh, V and Gupta, GS (2008) Modelling of single phase, non-wetting liquid flow in a coarse bed. In: SCANMET III, Sweden Lulea, 8-11 June, 2008, p561-567, 8-11 June, 2008, Sweden Lulea.

Singh, V and Gupta, GS (2006) Study of Non-Wetting Liquid Flow in a Bed of Monosized Particle Packing under the Influence of Lateral Gas Injection, 2006. In: TMS Annual Meeting, EPD Congress 2006 , Mar 2006, San Antonio, Texas, USA.

Singh, V and Gupta, GS (2006) A discrete model for non-wetting liquid flow from a point source in a packed bed under the influence of gas flow. In: Chemical Engineering Science, 61 (20). pp. 6855-6866.

Singh, V and Gupta, GS and Kitamura, S (2007) Modelling of raceway size and shape in mixed particle system. In: Procs. 6th IAS Ironmaking Conference, , Nov 2007, Rosario, Argentina.

Singh, V and Gupta, GS and Rajneesh, S (2006) Modelling of void initiation and breaking phenomena in a packed bed. In: Ironmaking & Steelmaking, 33 (2). pp. 101-110.

Singh, V and Gupta, GS and Rudolph, V (2006) Prediction of Minimum Spouting Velocity in Two-Dimensional Flat Bottom Spouted Beds. In: Chemical Engineering Communications, 193 (3). pp. 338-362.

Singh, Varsha and Gupta, GS and Sarkar, S (2007) Study of gas cavity size hysteresis in a packed bed using DEM. In: Chemical Engineering Science, 62 (22). pp. 6102-6111.

Singh, Y and Subramanian, S and Deshpande, RJ (2006) Surface chemical studies on graphite suspensions using inorganic dispersants. In: Proc. International Seminar on Mineral Processing Technology (MPT 2006) and Indo-Korean Workshop on Resource Recycling, 2006, Indo-Korean.

Sinha, AK and Lahiri, AK (1987) Mass transfer between gas and liquid in Bottom Blown process. In: Transactions of the Iron and Steel Institute of Japan, 27 (7). pp. 560-562.

Sivakesavam, O and Prasad, YVRK (2002) Characteristics of superplasticity domain in the processing map for hot working of as-cast Mg-11.5Li-1.5Al alloy. In: Materials Science and Engineering A, 323 (1-2). pp. 270-277.

Sivakesavam, O and Prasad, YVRK (2003) Hot deformation behaviour of as-cast Mg-2Zn-1Mn alloy in compression: a study with processing map. In: Materials Science and Engineering A, 362 (1-2). pp. 118-124.

Sivakesavam, O and Prasad, YVRK (2003) Influence of homogenization on the processing map for hot working of as-cast Mg-2Zn-1Mn alloy. In: Zeitschrift für Metallkunde, 94 (11). pp. 1255-1259.

Sivaprahasam, Duraisamy and Sriramamurthy, AM and Vijayakumar, M and Sundararajan, G and Chattopadhyay, Kamanio (2010) Synthesis of FeCu Nanopowder by Levitational Gas Condensation Process. In: Metallurgical and Materials Transactions B, 41 (4). pp. 841-856.

Sivaprasad, PV and Mannan, SL and Prasad, YVRK (2004) Processing Parameters for the Mechanical Working of 9 Cr-1 Mo Steel: Processing Maps Approach. In: Materials Science and Technology, 20 (12). pp. 1545-1550.

Sivaprasad, PV and Venugopal, S and Venugopal, Sridhar and Maduraimuthu, V and Vasudevan, M and Mannan, SL and Prasad, YVRK and Chaturvedi, RC (2003) Validation of processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using hot forging and rolling tests. In: Journal of Materials Processing Technology, 132 (1-3). 262-268 .

Skrotzki, W and Scheerbaum, N and Oertel, C-G and Brokmeier, H-G and Suwas, S and To'th, LS (2007) Recrystallization of high-purity aluminium during equal channel angular pressing. In: Acta Materialia, 55 (7). pp. 2211-2218.

Skrotzki, Werner and Scheerbaum, Nils and Oertel, Carl Georg and Arruffat-Massion, Roxane and Suwas, Satyam and Toth, Laszlo S (2007) Microstructure and texture gradient in copper deformed by equal channel angular pressing. In: Acta Materialia, 55 (6). pp. 2013-2024.

Somani, MC and Birla, NC and Prasad, YVRK and Singh, V (1995) Microstructural validation of processing maps using the hot extrusion of P/M Nimonic AP-1 superalloy. In: Journal of Materials Processing Technology, 52 (2-4). pp. 225-237.

Somani, MC and Muraleedharan, K and Birla, NC and Singh, V and Prasad, YVRK (1994) Hot deformation characteristics of INCONEL alloy MA 754 and development of a processing map. In: Metallurgical and materials transactions A, 25 (8). 1693-1702 .

Somani, MC and Muraleedharan, K and Prasad, YVRK and Singh, V (1998) Mechanical processing and microstructural control in hot working of hot isostatically pressed P/M IN-100 superalloy. In: Materials Science and Engineering A, 245 (01). pp. 88-99.

Somani, MC and Rao, Bhagiradha ES and Birla, NC and Bhatia, ML and Singh, Vakil and Prasad, YVRK (1992) Processing map for controlling microstructure in hot working of hot isostatically pressed powder metallurgy NIMONIC AP-1 superalloy. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (10). pp. 2849-2857.

Somasundaran, P and Deo, N and Natarajan, KA (2000) Utility of bioreagents in mineral processing. In: Minerals and Metallurgica Processing, 17 (02). pp. 112-115.

Song, Duk-Yong and Maruoka, Nobuhiro and Gupta, Govind Sharan and Shibata, Hiroyuki and Kitamura, Shin-Ya and Kamble, Smita (2012) Modeling of Ascending/Descending Velocity of Metal Droplet Emulsified in Pb-Salt System. In: METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 43 (4). pp. 973-983.

Song, Duk-Yong and Maruoka, Nobuhiro and Gupta, Govind Sharan and Shibata, Hiroyuki and Kitamura, Shin-ya and Sasaki, Naoto and Ogawa, Yuji and Matsuo, Michitaka (2012) Influence of Bottom Bubbling Rate on Formation of Metal Emulsion in Al-Cu Alloy and Molten Salt System. In: ISIJ International, 52 (6). pp. 1018-1025.

Sridhar, S and Ge, L and Tiwary, CS and Hart, AC and Ozden, S and Kalaga, K and Lei, S and Sridhar, SV and Sinha, RK and Harsh, H and Kordas, K and Ajayan, PM and Vajtai, R (2014) Enhanced Field Emission Properties from CNT Arrays Synthesized on Inconel Superalloy. In: ACS APPLIED MATERIALS & INTERFACES, 6 (3). pp. 1986-1991.

Sridharan, K and Chattopadhyay, K (1998) Synthesis by mechanical alloying and thermoelectric properties of Cu2Te. In: Journal of Alloys and Compounds, 264 (1-2). pp. 293-298.

Srikant, G and Chollacoop, N and Ramamurty, U (2006) Plastic strain distribution underneath a Vickers Indenter: Role of yield strength and work hardening exponent. In: Acta Materialia, 54 (19). pp. 5171-5178.

Srikanth, S and Jacob, KT (1989) Thermodynamic properties of copper-nickel alloys: measurements and assessment. In: Materials Science and Technology, 5 (5). pp. 427-434.

Srikanth, S and Iyengar, GNK and Jacob, KT (1990) Phase equilibria in the Co Ni F system and activities in (CoxNi1 x)F2 solid solutions at 1373 K. In: High temperature science, 30 (1). pp. 11-18.

Srikanth, S and Jacob, KT (1989) Discussion of thermodynamic consistency of the interaction parameter formalism. In: Metallurgical and Materials Transactions B, 20B (3). pp. 434-437.

Srikanth, S and Jacob, KT (1989) Extension of Darken's Quadratic Formalism to Dilute Multicomponent Solutions. In: ISIJ International, 29 (2). pp. 171-174.

Srikanth, S and Jacob, KT (1988) Thermodynamic consistency of the interaction parameter formalism. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 19 (2). pp. 269-275.

Srikanth, S and Jacob, KT (1991) Thermodynamics of Aluminum-Barium Alloys. In: Metallurgical and Materials Transactions B, 22 (5). pp. 606-616.

Srikanth, S and Jacob, KT (1991) Vapor-Pressure Of Calcium Corresponding To The Reduction Of Calcia By Aluminum. In: Transactions of the Indian Institute of Metals, 44 (5). 369 -373.

Srikanth, S and Jacob, KT (1988) Volume effects and associations in liquid alloys. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 19 (3). pp. 465-470.

Srikanth, S and Jacob, KT (1989) A modified least squares algorithm to treat associations in liquid alloys. In: Calphad, 13 (2). pp. 149-158.

Srikanth, S and Jacob, KT and Abraham, KP (1989) Representation of Thermodynamic Properties of Dilute Multi-Component Solutions--Options and Constraints. In: Steel Research, 60 (1). pp. 6-11.

Srikanth, S and Jacob, KT and Allibert, M and Srinivasan, VS (1991) Alloy oxide equilibria in the system Ca Al O at 1373 K. In: Revue Internationale des Hautes Temperatures et des Refractaires, 27 (3). pp. 131-139.

Srikanth, Srinivasan and Jacob, Thomas (1991) Thermodynamics of Aluminium -Strontium Alloys. In: Zeitschrift für Metallkunde, 82 (9). pp. 675-683.

Srikantha, S and Jacob, KT (1989) Activities in liquid Ga-Te alloys at 1120 k. In: Thermochimica Acta, 153 . pp. 27-35.

Srinivasa Rao, S and Anantharaman, TR (1961) The occurrence of a hexagonal phase in quenched 60:40 brass. In: Die Naturwissenschaften, 48 (23). p. 712.

Srinivasan, Dheepa and Chattopadhyay, K (2005) Non-equilibrium Transformations Involving $L1_2-Al_3Zr$ in Ternary Al-X-Zr Alloys. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 36A (2). pp. 311-320.

Srinivasan, D and Chattopadhyay, K (2004) Hardness of high strength nanocomposite Al–X–Zr (X = Si,Cu,Ni) alloys. In: Materials Science and Engineering A, 375-37 . pp. 1228-1234.

Srinivasan, D and Chattopadhyay, K (1997) Nanocomposite microstructure in a melt spun Al-Cu-Zr alloy. In: Materials Science Forum, 243 . pp. 251-256.

Srinivasan, D and Sastry, * and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1982) Influence of heat-treatment on the strength and fracture-behavior of fe-12cr-6al ferritic stainless-steel. In: Journal of Materials Science Letters, 17 (10). pp. 3009-3016.

Srinivasan, D and Surappa, MK (1992) Effect of Iron Impurity and Thermomechanical Processing on the Age-Hardening Behaviour of 6061 $Al-SiC_p$ MMC Produced by Casting Route. In: Scripta Metallurgica et Materialia, 27 (9). pp. 1139-1144.

Srinivasan, Dheepa and Chattopadhyay, K (1998) Formation and coarsening of a nanodispersed microstructure in melt spun Al–Ni–Zr alloy. In: Materials Science and Engineering A, 255 (1-2). pp. 107-116.

Srinivasan, Dheepa and Chattopadhyay, K (2001) Metastable phase evolution and hardness of nanocrystalline Al–Si–Zr alloys. In: Materials Science and Engineering A, 304-30 . pp. 534-539.

Srinivasan, Dheepa and Jayaram, Vikram and Das, PK and Chattopadhyay, K (1998) Nanodispersed Microstructures on Laser Mixing of Al-Ni Multilayers. In: Scripta Materialia, 38 (6). pp. 857-861.

Srinivasan, N and Prasad, YVRK (1992) Characterisation of dynamic recrystallisation in nickel using processing map for hot deformation. In: Materials Science and Technology, 8 (3). pp. 206-212.

Srinivasan, N and Prasad, YVRK (1995) Hot working characteristics of nimonic 75, 80A and 90 superalloys: a comparison using processing maps. In: Journal of Materials Processing Technlogy, 51 (1-4). pp. 171-192.

Srinivasan, N and Prasad, YVRK (1994) Hot-working characteristics of nichrome and the development of a processing map. In: Journal of Materials Processing Technology, 41 (4). pp. 409-424.

Srinivasan, N and Prasad, YVRK (1992) Influence of sulfur on the processing map for hot working of nickel. In: Scripta Metallurgica et Materialia, 27 (3). pp. 309-312.

Srinivasan, N and Prasad, YVRK (1994) Microstructural control in hot working of IN-718 superalloy using processing map. In: Metallurgical and Materials Transactions A, 25 (10). pp. 2275-2284.

Srinivasan, N and Prasad, YVRK (1994) Microstructural control in hot working of IN-718 superalloy using processing map. In: Metallurgical and Materials Transactions A, 25 (10). 2275 -2284 .

Srinivasan, N and Prasad, YVRK (1994) Processing map for hot working of Ni–16Cr–8Fe alloy (IN 600). In: Materials Science and Technology, 10 (5). 377-383 .

Srinivasan, N and Prasad, YVRK and Rao, P Rama (2008) Hot deformation behaviour of Mg–3Al alloy—A study using processing map. In: Materials Science and Engineering A, 476 (1-2). pp. 146-156.

Srinivasan, NS and Lahiri, AK (1977) Studies on the reduction of hematite by carbon. In: Metallurgical and Materials Transactions B, 8 (1). pp. 175-178.

Srinivasan, S and Ranganathan, S (2006) Nonferrous Materials Heritage of Mankind. In: Transactions of The Indian Institute of Metals, 59 (6). pp. 829-846.

Srinivasan, Sharada (1998) The use of tin and bronze in prehistoric southern Indian metallurgy. In: JOM Journal of the Minerals, Metals and Materials Society, 50 (07). pp. 44-48.

Srinivasan, VS and Sandhya, R and Valsan, M and Rao, KBS and Mannan, SL and Sastry, DH (1997) The influence of dynamic strain ageing on stress response and strain-life relationship in low cycle fatigue of 316L(N) stainless steel. In: Scripta Materialia, 37 (10). pp. 1593-1598.

Srinivasan, VS and Valsan, M and Rao, KBS and Mannan, SL and Sastry, DH (1996) Low cycle fatigue behaviour of a nitrogen modified 316L stainless steel at 823 K. In: Workshop on the Phenomena of Creep, Fatigue, and Creep-Fatigue Interactions, FEB 15-17, 1995, KALPAKKAM, INDIA, pp. 489-495.

Srinivasan, VS and Valsan, M and Sandhya, R and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (1999) High temperature time-dependent low cycle fatigue behaviour of a type 316L(N) stainless steel. In: International Journal of Fatigue, 21 (1). pp. 11-21.

Sripriya, Jaganathan and Anandhakumar, Sundaramurthy and Achiraman, Shanmugam and Antony, Jacob Joe and Siva, Durairaj and Raichur, Ashok M (2013) Laser receptive polyelectrolyte thin films doped with biosynthesized silver nanoparticles for antibacterial coatings and drug delivery applications. In: INTERNATIONAL JOURNAL OF PHARMACEUTICS, 457 (1). pp. 206-213.

Srirangarajan, Aarti and Datta, Aditi and Gandi, Appala Naidu and Ramamurty, U and Waghmare, UV (2014) Universal binding energy relation for cleaved and structurally relaxed surfaces. In: JOURNAL OF PHYSICS-CONDENSED MATTER, 26 (5).

Srivastava, AK and Ojha, SN and Ranganathan, S (1998) Microstructural features and heat flow analysis of atomized and spray-formed Al-Fe-V-Si alloy. In: Metallurgical and Materials Transactions A, 29 (08). pp. 2205-2219.

Srivastava, AK and Ojha, SN and Ranganathan, S (2001) Microstructural features associated with spray atomization and deposition of Al-Mn-Cr-Si alloy. In: Journal of Materials Science, 36 (14). pp. 3335-3341.

Srivastava, AK and Ranganathan, S (2001) Microstructural characterization of rapidly solidified Al-Fe-Si, Al-V-SI, and Al-Fe-V-Si alloys. In: Journal of Materials Research, 16 (7). pp. 2103-2117.

Srivastava, AK and Ranganathan, S (1992) A Novel Microstructure in a Rapidly Solidified $Al_{80}Fe_{10}V_4Si_6$ Alloy. In: Scripta Metallurgica et Materialia, 27 (9). pp. 1241-1245.

Srivastava, AK and Ranganathan, S (1996) Quasicrystals, crystals and multiple twins in rapidly solidified Al-Cr-Si, Al-Mn-Si and Al-Mn-Cr-Si alloys. In: Acta Materialia, 44 (7). pp. 2935-2946.

Srivastava, AK and Ranganathan, S (1997) Twinning of quasicrystals and related crystals. In: Progress in Crystal Growth and Characterization of Materials, 34 (1-4). pp. 251-262.

Srivastava, AK and Srivastava, CM and Mahesh, R and Rao, CNR (1996) A ferromagnetic resonance study of La1-xCaxMnO3. In: Solid State Communications, 99 (3). 161-165 .

Srivastava, C and Chithra, S and Malviya, KD and Sinha, SK and Chattopadhyay, K (2011) Size dependent microstructure for Ag-Ni nanoparticles. In: Acta Materialia, 59 (16). pp. 6501-6509.

Srivastava, Chandan (2012) Nano-size and miscibility gap. In: Advances in Materials and Processing, 585 . pp. 8-13.

Srivastava, Chandan (2012) Phase separation by nanoparticle splitting. In: Materials Letters, 70 . pp. 122-124.

Srivastava, Chandan and Mundotiya, Brij Mohan (2013) Electron microscopy of microstructural transformation in electrodeposited Ni-rich, Ag-Ni film. In: THIN SOLID FILMS, 539 . pp. 102-107.

Srivastava, Chandan and Mundotiya, Brij Mohan (2012) Morphology Dependence of Ag-Ni Solid Solubility. In: Electrochemical and Solid-State Letters, 15 (2). K10-K15.

Srivastava, Chandan and Rai, Rajesh Kumar (2013) Transmission electron microscopy study of Ni-rich, Ag-Ni nanowires. In: CHEMICAL PHYSICS LETTERS, 575 . pp. 91-96.

Srivastava, Chandan and Rai, Rajesh Kumar (2013) Two phase microstructure for Ag-Ni nanowires. In: CHEMICAL PHYSICS LETTERS, 561 . pp. 101-106.

Srivastava, Chandan and Sinha, Shyam Kanta (2011) Ultra fine scale phase separated microstructure for Ag-Fe nanoparticle. In: Chemical Physics Letters, 514 (4-6). pp. 307-310.

Srivastava, Chandan and Sushma, KVL (2012) Compositionally Graded Microstructure for Ag-Fe Nanoparticles. In: NANO-MICRO LETTERS, 4 (3). pp. 172-175.

Srivastava, D and Dey, GK and Banerjee, S and Ranganathan, S (1997) Crystallography of Hydride Formation in Zr-Nb Alloys. In: MRS Proceedings, 481 . p. 315.

Srivastava, D and Madangopal, K and Banerjee, S and Ranganathan, S (1993) Self accomodation morphology of martensite variants in Zr---2.5wt%Nb alloy. In: Acta Metallurgica et Materialia, 41 (12). pp. 3445-3454.

Srivastava, D and Mukhopadhyay, P and Banerjee, S and Ranganathan, S (2000) Morphology and substructure of lath martensites in dilute Zr=Nb alloys. In: Materials Science and Engineering, 288 (01). pp. 101-110.

Sterneland, J and Lahiri, AK (1999) Contraction and meltdown behaviour of olivine iron ore pellets under simulated blast furnace conditions. In: Ironmaking and Steelmaking, 26 (5). pp. 339-348.

Subrahmanyam, J and LahirI, AK and Abraham, KP (1978) Thermodynamic Evaluation of Optimum Conditions for Chemical Vapor-Deposition of Boron From BBR3-H2 Mixtures. In: Indian Journal of Technology, 16 (6). 238-241 .

Subrahmanyam, J and Lahiri, AK and Abraham, KP (1980) Kinetics of Chemical Vapor Deposition. In: Journal of Electrochemical Society, 127 (6). pp. 1394-1399.

Subramaniam, A and Ranganathan, S (2004) Vacancy ordered phases in Al–Cu–Ni as average lattices. In: Journal of Non-Crystalline Solids, 334 . pp. 114-116.

Subramaniam, Anandh and Lord, EA (2003) Pentagonal and trigonal quasilattices and their approximants. In: Zeitschrift Fur Kristallographie, 218 (3). pp. 182-186.

Subramanian, C and Kishore, * (1984) Influence of Graphite Type, Modification and Hot Working on Wear of Aluminium Based Particulate Composites. In: Journal of Reinforced Plastics and Composites, 3 (4). pp. 278-293.

Subramanian, S and Lahiri, AK and Jain, AKNK (1989) Electroslag remelting studies on the simultaneous desulfurization and dephosphorization of En24 steel using sodium carbonate. In: Transactions of the Indian Institute of Metals, 42 (2). pp. 121-125.

Subramanian, S and Natarajan, KA (1987) Selective flocculation studies on iron ore minerals. In: Transactions of the Indian Institute of Metals, 40 (6). pp. 489-496.

Subramanian, S and Natarajan, KA and Sathyanarayana, DN (1989) FTIR spectroscopic studies on the adsorption of an oxidized starch on some oxide minerals. In: Minerals & Metallurgical Processing, 6 (3). pp. 152-158.

Subramanian, C (1988) Wear lip formation during dry sliding. In: Wear, 126 (1). pp. 57-67.

Subramanian, C and Subramanian, DK (1989) Performance Analysis of Voting Strategies for a Fly-by-Wire System of a Fighter Aircraft. In: IEEE Transactions on Automatic Control, 34 (9). pp. 1018-1021.

Subramanian, S and Bhat, KL (1992) Recovery of copper from vanadiferrous magnetite ore of Masanikere area, Shimoga district. In: Indian Journal of Technology, 30 (6). pp. 281-284.

Subramanian, S and Haran, NP and Kumar, GS and Gundewar, CS and Louis, KT (2006) Characterisation and cyanide leach amenability studies on gold ore samples from some Indian deposits. In: Proc. International Seminar on Mineral Processing Technology (MPT 2006) and Indo-Korean Workshop on Resource Recycling, 2006, Indo-Korean.

Subramanian, S and Natarajan, KA (1989) Adsorption behaviour of an oxidised starch onto haematite in the presence of calcium. In: Minerals Engineering, 2 (1). pp. 55-64.

Subramanian, S and Natarajan, KA (1991) Flocculation, filtration and selective flocculation studies on haematite ore fines using starch. In: Minerals Engineering, 4 (5). 587-598 .

Subramanian, S and Natarajan, KA (1988) Some studies on the adsorption behaviour of an oxidised starch onto haematite. In: Minerals Engineering, 3 (1). pp. 241-254.

Subramanian, S and Natarajan, KA (1997) Special Issue on Mineral Processing - Preface. In: Transactions of the Indian Institute of Metals, 50 (5). U3-U4.

Subramanian, S and Natarajan, KA (1988) Zeta Potential Studies On Some Iron-Ore Minerals In The Presence Of Starches. In: Transactions of the Indian Institute of Metals, 41 (3). pp. 255-263.

Subramanian, S and Santhiya, D and Natarajan, KA (2003) Surface modification studies on sulphide minerals using bioreagents. In: International Journal of Mineral Processing, 72 (1-4). pp. 175-188.

Subramanian, S and Sharma, AK and Rajendra, A and Gowda, Amitha S and Saravanan, L (2007) Studies on dispersion stabilization of hard and soft coating materials for space applications. In: Procs. Conference On Advances In Space Science And Technology (CASST'2007), , Jan 2007, Bangalore.

Sudarshan, * and Surappa, MK (2008) Dry sliding wear of fly ash particle reinforced A356 Al composites. In: Wear, 265 (3-4). pp. 349-360.

Sudarshan, * and Surappa, MK (2006) Processing and characterization of fly ash particle reinforced A356 Al composites. In: Solidification Processing of Metal Matrix Composites - Rohatgi Honorary Symposium, 2006.

Sudarshan, * and Surappa, MK (2008) Synthesis of fly ash particle reinforced A356 Al composites and their characterization. In: Materials Science and Engineering: A, 480 (1-2). pp. 117-124.

Sudarshan, M and Surappa, MK and Ahn, Dongjoon and Raj, Rishi (2008) Nanoceramic-Metal Matrix Composites by In-Situ Pyrolysis of Organic Precursors in a Liquid Melt. In: Metallurgical and Materials Transactions A, 39A (13). pp. 3291-3297.

Sudhakar, KV and Dwarakadasa, ES (2000) A study on fatigue crack growth in dual phase martensitic steel in air environment. In: Bulletin of Materials Science, 23 (3). pp. 193-199.

Sudhakar, KV and Murty, GS (1998) Fracture toughness correlation with microstructure and other mechanical properties in near-eutectoid steel. In: Bulletin of Materials Science, 21 (3). pp. 241-245.

Sudhakar, KV and Sampathkumaran, P and Dwarakadasa, ES (2000) Dry sliding wear in high density Fe-2%Ni based P/M alloys. In: Wear, 242 (1-2). pp. 207-212.

Sudhir, B and Chokshi, AH (2001) Compressive creep studies on alumina particulate reinforced alumino-silicate glass. In: International Conference on Superplasticity in Advanced Materials (ICSAM-2000), 1-4 Aug. 2000, Switzerland, pp. 123-128.

Sudhir, B and Chokshi, Atul H (2001) Compression Creep Characteristics of 8-mol%-Yttria-Stabilized Cubic-Zirconia. In: Journal of the American Ceramic Society, 84 (11). pp. 2625-2632.

Sudhir, B and Chokshi, Atul H (2003) Creep characterization of alumina particulate reinforced alumino-silicate glass. In: Journal of Non-Crystalline Solids, 316 (1). pp. 167-173.

Sujata, M and Sastry, DH and Ramachandra, C (2004) Microstructural characterization and creep behaviour of as-cast titanium aluminide Ti–48Al–2V. In: Intermetallics, 12 (7-9). pp. 691-697.

Sundar, RS and Baligidad, RG and Prasad, YVRK and Sastry, DH (1998) Processing of iron aluminides. In: Materials Science and Engineering A, 258 (1-2). pp. 219-228.

Sundar, RS and Kutty, TRG and Sastry, DH (2000) Hot hardness and creep of $Fe_3Al$-based alloys. In: Intermetallics, 8 (4). pp. 427-437.

Sundar, RS and Sastry, DH (2000) Creep behaviour of $Fe_3Al$-based alloys in $DO_3$ phase field. In: Intermetallics, 8 (9-11). pp. 1061-1065.

Sundar, RS and Sastry, DH (2000) Creep behaviour of Fe3Al-based alloys in DO3 phase field. In: Intermetallics, 8 (9-11). pp. 1061-1065.

Sundar, RS and Sastry, DH (1996) Effect of microstructure on the creep behaviour of Ti-24Al-11Nb. In: Workshop on the Phenomena of Creep, Fatigue, and Creep-Fatigue Interactions, FEB 15-17, 1995, KALPAKKAM, INDIA.

Sundar, RS and Sastry, DH and Prasad, YVRK (2003) Hot workability of as-cast Fe3Al-2.5%Cr intermetallic alloy. In: Materials Science and Engineering A, 347 (1-2). pp. 86-92.

Sundararaman, D and Ranganathan, S and Raghunathan, VS (1996) A High-Resolution Transmission of the Precipitation Process in a Electron Microscopy Study Dilute Ti-N Alloy. In: Metallurgical And Materials Transactions A, 27 (10). pp. 2966-2977.

Sundaresan, R and Raghuram, AC and Mallya, RM and Vasu, KI (1996) Sintering of beta titanium: Role of dislocation pipe diffusion. In: Powder Metallurgy, 39 (2). pp. 138-142.

Surappa, MK (2003) Aluminium Matrix Composites: Challenges and Opportunities. In: Sadhana, 28 (1-2). pp. 319-334.

Surappa, MK (1997) Microstructure evolution during solidification of DRMMCs (discontinuously reinforced metal matrix composites): State of art. In: Journal of Materials Processing Technology, 63 (1-3). pp. 325-333.

Surappa, MK (1993) On the nature of particle flow during extrusion of cast 6061 Al/SiCP composites. In: Journal of Materials Science Letters, 12 (16). pp. 1272-1273.

Surappa, MK and Sivakumar, P (1993) Fracture Toughness Evaluation of $2040-Al/Al_2O_3$ Particulate Composites by Instrumented Impact. In: Composites Science and Technology, 46 (3). pp. 287-292.

Suresh, D and Kishore, * and Rohatgi, PK (1981) Working experience with a foundry solar furnace. In: Solar Energy, 27 (6). pp. 457-462.

Suresh, D and Rohatgi, PK (1981) Heat transfer analysis on metal-melting in a foundry solar furnace. In: Solar Energy, 26 (1). pp. 87-90.

Suresh, D and Rohatgi, PK and Coutures, JP (1981) Use of solar furnaces .1. materials research. In: Solar Energy, 26 (5). pp. 377-390.

Suresh, KS and Bhaumik, Subir K and Suwas, Satyam (2013) Effect of thermal and thermo-mechanical cycling on the microstructure of Ni-rich NiTi shape memory alloys. In: Materials Letters, 99 . pp. 150-153.

Suresh, KS and Geetha, M and Richard, C and Landoulsi, J and Ramasawmy, H and Suwas, S and Asokamani, R (2012) Effect of equal channel angular extrusion on wear and corrosion behavior of the orthopedic Ti-13Nb-13Zr alloy in simulated body fluid. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 32 (4). pp. 763-771.

Suresh, KS and Gurao, NP and Singh, Satyaveer D and Suwas, Satyam and Chattopadhyay, K and Zherebtsov, SV and Salishchev, GA (2013) Effect of equal channel angular pressing on grain refinement and texture evolution in a biomedical alloy Ti-13Nb-13Zr. In: MATERIALS CHARACTERIZATION, 82 . pp. 73-85.

Suresh, KS and Kim, Dong-Ik and Bhaumik, SK and Suwas, Satyam (2013) Evolution of microstructure and texture in Ni49.4Ti38.6Hf12 shape memory alloy during hot rolling. In: Intermetallics, 42 . pp. 1-8.

Suresh, KS and Kim, Dong-Ik and Bhaumik, SK and Suwas, Satyam (2012) Interrelation of grain boundary microstructure and texture in a hot rolled Ni-rich NiTi alloy. In: Scripta Materialia, 66 (8). pp. 602-605.

Suresh, KS and Kim, DongIk and Bhaumik, SK and Suwas, Satyam (2014) Evolution and stability of phases in a high temperature shape memory alloy Ni49.4Ti38.6Hf12. In: INTERMETALLICS, 44 . pp. 18-25.

Suresh, KS and Kumar, N and Mishra, RS and Suwas, S (2013) Evolution of microstructure and texture in friction stir processed Al-Mg-Mn alloy. In: 5th International Conference on Recrystallization and Grain Growth (ReX&GG V), MAY 05-10, 2013, Sydney, AUSTRALIA, pp. 247-250.

Suresh, KS and Rollett, AD and Suwas, Satyam (2013) Evolution of microstructure and texture during deformation and recrystallization of heavily rolled Cu-Cu multilayer. In: Metallurgical and Materials Transactions A, 44A (8). pp. 3866-3881.

Suresh, KS and Sinha, Subhasis and Chaudhary, Abhishek and Suwas, Satyam (2012) Development of microstructure and texture in Copper during warm accumulative roll bonding. In: MATERIALS CHARACTERIZATION, 70 . pp. 74-82.

Suresh, MR and Avadhani, GS (2006) Hot Deformation Characteristics of 0.3C-CrMoV(ESR) Steel. In: Proc,Intl.Conf. & Exhibition on Pressure vessels and Piping, OPE-2006, Feb 7-9 2006, Chennai, India.

Suresh, N and Ramamurty, U (2008) Aging response and its effect on the functional properties of Cu–Al–Ni shape memory alloys. In: Journal of Alloys and Compounds, 449 (1-2). 113-118.

Suresh, N and Ramamurty, U (2005) The effect of ageing on the damping properties of Cu-Al-Ni shape memory alloys. In: Smart Materials & Structures, 14 (5). N47-N51.

Suresha, B and Siddaramaiah, * and Kishore, * and Seetharamu, S and Kumaran, P Sampath (2009) Investigations on the influence of graphite filler on dry sliding wear and abrasive wear behaviour of carbon fabric reinforced epoxy composites. In: Wear, 267 (9-10). pp. 1405-1414.

Suresha, SJ and Bhide, R and Jayaram, V and Biswas, SK (2006) Processing, microstructure and hardness of TiN/(Ti, Al)N multilayer coatings. In: Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 429 (1-2). 252 -260.

Suresha, SJ and Math, S and Jayaram, V and Biswas, SK (2007) Toughening through multilayering in TiN–AlTiN films. In: Philosophical Magazine, 87 (17). pp. 2521-2539.

Suwas, Satyam and Beausir, B and Toth, LS and Fundenberger, JJ and Gottstein, G (2011) Texture evolution in commercially pure titanium after warm equal channel angular extrusion. In: Acta Materialia, 59 (3). pp. 1121-1133.

Suwas, Satyam and Bhowmik, Ayan and Biswas, Somjeet (2009) Ultra-fine Grain Materials by Severe Plastic Deformation: Application to Steels. In: International Conference on Microstructure and texture in Steels and Other Materials, FEB 05-07, 2008, INDIA, pp. 325-344.

Suwas, Satyam and Biswas, Somjeet and Singh, Satyaveer D and Chattopadhyay, Kamanio (2008) Texture and grain boundary character distribution during Equal Channel Angular Extrusion of some two-phase copper alloys. In: 4th International Conference on Nanomaterials by Severe Plastic Deformation IV, AUG 18-22, 2008, Goslar, GERMANY.

Suwas, Satyam and Gottstein, G and Kumar, R (2007) Evolution of Crystallographic Texture during equal channel Angular Extrusion (ECAE) and its effects on secondary processing of magnesium. In: Materials Science and Engineering: A, 471 (1-2). pp. 1-14.

Suwas, Satyam and Gurao, Nilesh P and Ali, Ashkar (2009) Evolution of Transformation Texture in a Metastable B - Titanium Alloy. In: 15th International Conference on Textures of Materials, JUN 01-06, 2008, Pittsburgh, PA, pp. 617-628.

Suwas, Satyam and Massion, R Arruffat and Toth, LS and Fundenberger, JJ and Beausir, B (2009) Evolution of texture during equal channel angular extrusion of commercially pure aluminum: Experiments and simulations. In: Materials Science and Engineering A, 520 (1-2). pp. 134-146.

Suwas, Satyam and Ranganathan, S and Gurao, NP and Garg, Rohini (2011) Evolution of texture and grain boundary microstructure in two-phase (α + β) brass during recrystallization. In: Philosophical Magazine, 91 (32). pp. 4089-4108.

Suwas, Satyam and Suresh, KS and Rollett, AD (2012) Texture and microstructure evolution during cold rolling of Cu-Fe laminates prepared by accumulative roll bonding. In: 4th International Conference on Recrystallization and Grain Growth (ReX & GG 2010), JUL 04-09, 2010, Sheffield, ENGLAND, p. 170.

Suzuki, S and Jacob, KT and Waseda, Y and Kang, SC and Saito, M (1998) XPS study of the effect of Ar-Ion bombardment and aging on surface properties of superionic conducting glass (CuI)0.3 (Cu2O)0.35 (MoO3)0.35. In: Materials Transactions, JIM, 39 (10). pp. 1024-1028.

Swaminathan, S and Jacob, KT (1989) A Comment on the Nomenclature of Invariant Three-Phase Equilibria. In: Bulletin of Alloy Phase Diagrams, 10 (4). pp. 329-331.

Swaminathan, S and Rao, BS and Jayaram, V (2002) The influence of oxygen impurities on the formation of AlN-Al composites by infiltration of molten Al-Mg. In: Materials Science and Engineering A, 337 (1-2). pp. 134-139.

Swaminathan, S and Rao, Srinivasa B and Jayaram, V (2002) The production of AlN-rich matrix composites by the reactive infiltration of Al alloys in nitrogen. In: Acta Materialia, 50 (12). pp. 3093-3104.

Swamy, VT and Chattopadhyay, K and Ranganathan, S (1990) The Nature of Metastable Phase Formation in the Microsecond Pulsed Laser-melted Pool of Al-Ge Eutectic Alloy. In: Materials Science and Engineering A, 123 (2). pp. 247-254.

Swamy, VT and Ranganathan, S and Chattopadhyay, K (1992) Microstructural development in microsecond pulsed laser elted polycrystalline nickel. In: Journal of Materials Science, 27 (5). 1375 -1379.

Swamy, VT and Ranganathan, S and Chattopadhyay, K (1989) On the resolidification behavior of microsecond pulsed-laser-melted pool of bismuth. In: Journal of Crystal Growth, 96 (3). pp. 628-636.

Swamy, VT and Ranganathan, S and Chattopadhyay, K (1989) Rapidly solidified Al–Cr alloys: Crystalline and quasicrystalline phases. In: Journal of Materials Research, 4 (3). pp. 539-551.

Swaroop, S and Chokshi, AH (2003) Role of diffusion creep in a superplastic zirconia-alumina composite. In: Materials Science Forum, 447-4 . pp. 323-328.

Swaroop, Sathya and Kilo, Martin and Argirusis, Christos and Borchardt, Gunter and Chokshi, Atul H (2005) Lattice and grain boundary diffusion of cations in 3YTZ analyzed using SIMS. In: Acta Materialia, 53 (19). pp. 4975-4985.

Swathi, SK and Jeevananda, T and Ramamurthy, Praveen C (2010) Fabrication of device quality films of high loaded PPy/MWCNT nanocomposites using pulsed laser deposition. In: Organic Electronics, 11 (9). pp. 1489-1499.

Swathi, SK and Ranjith, K and Kumar, Prajwal and Ramamurthy, Praveen C (2012) Novel thiophene derivative hybrid composite solar cells. In: Solar Energy Materials and Solar Cells, 96 (1). pp. 101-107.

Swathi, SK and Rao, Arun D and Ranjith, K and Kumar, Rajneesh and Ramakrishna, SA and Ramamurthy, Praveen C (2013) Device Fabrication of insoluble donor-acceptor-donor structured molecule by pulsed laser deposition- A comparative study using different laser source. In: 2nd Conference of the Optics-and-Photonics-Society-of-Singapore / International Conference on Optics in Precision Engineering and Nanotechnology (icOPEN), APR 09-11, 2013, Singapore, SINGAPORE.

sarkar, J and Surappa, MK (1994) Serrated yielding in thermomechanically processed 6061 $Al-SiC_p$ composite. In: Journal of Materials Science Letters, 13 (11). pp. 835-837.

T

T, Chandrasekaran and *, Kishore (1992) Grinding abrasive wear and associated particle size effect. In: Materials Science and Technology, 8 (8). pp. 722-727.

Takeuchi, A and Ranganathan, S and Murty, BS and Inoue, A (2008) Analysis of Composition Dependence of Formation of Ternary Bulk Metallic Glasses from Crystallographic Data on Ternary Compounds. In: Reviews on Advanced Materials Science, 18 (1). pp. 56-60.

Takeuchi, Akira and Murty, Budaraju Srinivasa and Hasegawa, Masashi and Ranganathan, Srinivasa and Inoue, Akihisa (2007) Analysis of Bulk Metallic Glass Formation Using a Tetrahedron Composition Diagram that Consists of Constituent Classes Based on Blocks of Elements in the Periodic Table. In: Materials Transactions, 48 (6). pp. 1304-1312.

Talukder, Santanu and Kumar, Praveen and Pratap, Rudra (2013) Electric current-induced mass flow in very thin infinite metallic films. In: IEEE Transactions on Electron Devices, 60 (9). pp. 2877-2883.

Talukder, Santanu and Somaiah, Nalla and Kumar, Praveen (2013) Effect of substrate surface roughness on electric current induced flow of liquid metals. In: APPLIED PHYSICS LETTERS, 102 (5).

Tamaki, S and Jacob, KT and Waseda, Y and Cusack, NE and Tsuchiya, Y (1980) A derivation of thermodynamic quantities of liquid alloys from their structure factors. In: Journal of Physics F: Metal Physics, 10 (4). L109-L113.

Tamhankar, RV (1980) Emerging trends in super-alloy processing and applications. In: Transactions of the Indian Institute of Metals, 33 (2). 101-112 .

Tamirisakandala, S and Yellapregada, PVRK and Medeiros, SC and Frazier, WG and Malas, JC and Dutta, B (2003) High-Speed Deformation Processing of a Titanium Alloy. In: Advanced Engineering Materials, 5 (9). 667 -669.

Tandaiya, Parag and Narasimhan, R and Ramamurty, U (2007) Mode I crack tip fields in amorphous materials with application to metallic glasses. In: Acta Materialia, 55 (19). pp. 6541-6552.

Tandaiya, Parag and Narasimhan, R and Ramamurty, U (2013) On the mechanism and the length scales involved in the ductile fracture of a bulk metallic glass. In: Acta Materialia, 61 (5). pp. 1558-1570.

Tandaiya, Parag and Ramamurty, U and Narasimhan, R (2009) Mixed mode (I and II) crack tip fields in bulk metallic glasses. In: Journal of the Mechanics and Physics of Solids, 57 (11). pp. 1880-1897.

Tandaiya, Parag and Ramamurty, U and Narasimhan, R (2011) On numerical implementation of an isotropic elastic-viscoplastic constitutive model for bulk metallic glasses. In: Modelling and Simulation in Materials Science and Engineering, 19 (1).

Tangri, K and Sastry, DH (1975) Dislocation mechanisms for plastic flow of nickel in the temperature range 4.2 – 1200 K. In: Philosophical Magazine, 32 (3). pp. 513-525.

Tao, M and Chokshi, AH and Conner, RD and Ravichandran, G and Johnson, WL (2010) Deformation and crystallization of Zr-based amorphous alloys in homogeneous flow regime. In: Journal of Materials Research, 25 (6). pp. 1137-1148.

Tasbihi, Minoo and Kete, Marko and Raichur, Ashok M and Tusar, Natasa Novak and Stangar, Urska Lavrencic (2012) Photocatalytic degradation of gaseous toluene by using immobilized titania/silica on aluminum sheets. In: ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 19 (9). pp. 3735-3742.

Tendeloo, Van G and Menon, J and Singh, A and Ranganathan, S (1989) Electron diffraction studies of variable periodicity in decagonal quasicrystals in aluminium-cobalt alloys. In: Phase Transitions, 16 (1-4). pp. 59-65.

Tendeloo, van G and Singh, Alok and Ranganathan, S (1991) Quasicrystals and their crystalline homologues in the Al-Mn-Cu ternary alloys. In: Philosophical Magazine A & B, 64 (2). 413 -427.

Tennyson, Gerald P and Kumar, PV and Lakshmi, H and Phanikumar, G and Dutta, P (2010) Experimental studies and phase field modeling of microstructure evolution during solidification with electromagnetic stirring. In: Transactions of Nonferrous Metals Society of China, 20 (Suppl.). S774-S780.

Thangamani, Nithyanantham and Gandhi, Ashutosh S and Jayaram, Vikram and Chokshi, Atul H (2005) Low-Temperature High-Pressure Consolidation of Amorphous $Al_{2}O_{3}-15\hspace{5mm}{mol\%}\hspace{5mm}Y_{2}O_{3}$. In: Journal of the American Ceramic Society, 88 (10). pp. 2696-2701.

Thangamani, Nithyanantham and Chinnakali, Kandasamy and Gnanam, FD (2002) The effect of powder processing on densification, microstructure and mechanical properties of hydroxyapatite. In: Ceramics International, 28 (4). 355-362 .

Thangaraj, N and Subbanna, GN and Ranganathan, S and Chattopadhyay, K (1987) Electron microscopy and diffraction of icosahedral and decagonal quasicrystals in aluminum-manganese alloys. In: Journal of Microscopy, 146 (3). pp. 287-302.

Thirumal, E and Prabhu, D and Chattopadhyay, K and Ravichandran, V (2010) Magnetic, electric, and dielectric properties of FeCo alloy nanoparticles dispersed in amorphous matrix. In: Physica Status Solidi A, 207 (11). pp. 2505-2510.

Thirumal, E and Prabhu, D and Chattopadhyay, K and Ravichandran, V (2010) Synthesis, magnetic and electrical properties of Fe-containing SiO2 nanocomposite. In: Journal of Alloys and Compounds, 502 (1). pp. 169-175.

Thirumurugan, M and Kumaran, S and Suwas, Satyam and Rao, Srinivasa T (2011) Effect of rolling temperature and reduction in thickness on microstructure and mechanical properties of ZM21 magnesium alloy and its subsequent annealing treatment. In: Materials Science and Engineering A, 528 (29-30). pp. 8460-8468.

Thomas, Jayasree and Riyazulla, MS and Subramanian, S and Vasudev, VN and Gundewar, CS (2008) Electron Microprobe and Mineralogical Study on Cobalt Bearing Sulphide from the Kalyadi Copper Mine, Hassan District, Karnataka. In: Journal of the Geological Society of India, 71 (2). pp. 257-260.

Thomas, J and Riyaz Ulla, MS and Louis, KT and Gundewar, CS and Subramanian, S (2006) Studies on the biodissolution of cobaltic pyrite from copper tailings. In: Proceedings of the XXIII International Mineral Processing Congress, Sep 2006, Turkey.

Thomas, Midhun B and Radhakrishnan, Krishna and Gnanadhas, Divya P and Chakravortty, Dipshikha and Raichur, Ashok M (2013) Intracellular delivery of doxorubicin encapsulated in novel pH-responsive chitosan/heparin nanocapsules. In: International Journal of Nanomedicine, 8 . pp. 267-273.

Tiwari, RS and Claus, JC and Ranganathan, S (1989) Kinetics of two-stage crystallization in Metglas 2826A. In: Journal of Materials Science, 24 (12). pp. 4399-4402.

Tiwary, CS and Kashyap, S and Chattopadhyay, K (2013) Effect of Mg addition on microstructural, mechanical and environmental properties of Nb-Si eutectic composite. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 560 . pp. 200-207.

Tiwary, CS and Kashyap, S and Chattopadhyay, K (2013) Effect of indium addition on microstructural, mechanical and oxidation properties of suction cast Nb-Si eutectic alloy. In: Materials Science and Technology, 29 (6). pp. 702-709.

Tiwary, CS and Kumbhakar, P and Mitra, AK and Chattopadhyay, K (2009) Synthesis of wurtzite-phase ZnS nanocrystal and its optical properties. In: Journal of Luminescence, 129 (11). pp. 1366-1370.

Tiwary, CS and Mahapatra, Roy D and Chattopadhyay, K (2012) Effect of length scale on mechanical properties of Al-Cu eutectic alloy. In: APPLIED PHYSICS LETTERS, 101 (17).

Tiwary, CS and Verma, Akash and Biswas, Krishanu and Mondal, Amit K and Chattopadhyay, Kamanio (2011) Preparation of ultrafine CsCl crystallites by combined cryogenic and room temperature ball milling. In: Ceramics International, 37 (8). pp. 3677-3686.

Tiwary, Chandra Sekhar and Srivastava, Chandan and Kumbhakar, Pathik (2011) Onset of sphalerite to wurtzite transformation in ZnS nanoparticles. In: Journal of Applied Physics, 110 (3).

Tiwary, Chandra Sekhar and Verma, Akash and Kashyp, Sanjay and Biswas, Krishanu and Chattopadhyay, Kamanio (2013) Preparation of Freestanding Zn Nanocrystallites by Combined Milling at Cryogenic and Room Temperatures. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (4). pp. 1917-1924.

Tomar, Gaurav and Sharma, Ashutosh and Shenoy, Vijay B and Biswas, Gautam (2007) Surface instability of confined elastic bilayers: Theory and simulations. In: Physical Review E - Statistical, Nonlinear and Soft Matter Physics, 76 (1). 011607- 011614.

Tripathi, A and Chandrasekaran, N and Raichur, AM and Mukherjee, A (2009) Antibacterial Applications of Silver Nanoparticles Synthesized by Aqueous Extract of Azadirachta Indica (Neem) Leaves. In: Journal Of Biomedical Nanotechnology, 5 (1). pp. 93-98.

Tripathy, Sushree Swarupa and Raichur, Ashok M (2008) Dispersibility of Barium Titanate Suspension in the Presence of Polyelectrolytes: A Review. In: Journal of Dispersion Science and Technology, 29 (2). pp. 230-239.

Tripathy, A and Raichur, Ashok M and Chandrasekaran, N and Prathna, TC and Mukherjee, Amitava (2010) Process variables in biomimetic synthesis of silver nanoparticles by aqueous extract of Azadirachta indica (Neem) leaves. In: Journal of Nanoparticle Research, 12 (1). pp. 237-246.

Tripathy, Jasaswini and Raichur, Ashok M (2012) LbL-coated microcapsules as systems for encapsulation of optical brightening agent. In: JOURNAL OF APPLIED POLYMER SCIENCE, 127 (3). pp. 1609-1614.

Tripathy, Jasaswini and Raichur, Ashok M (2012) Designing carboxymethyl cellulose based layer-by-layer capsules as a carrier for protein delivery. In: Colloids and Surfaces B: Biointerfaces, 101 . pp. 487-492.

Tripathy, SS and Raichur, AM (2006) Mechanism of fluoride adsorption on to manganese dioxide coated activated alumina. In: Proceedings of Symposium on Emerging Trends in Separation Science and Technology SESTEC-2006, SEP 2006, Mumbai.

Tripathy, Sushree Swarupa and Raichur, Ashok M (2008) Abatement of fluoride from water using manganese dioxide-coated activated alumina. In: Journal of Hazardous Materials, 153 (3). pp. 1043-1051.

Tripathy, Sushree Swarupa and Raichur, Ashok M (2011) Dissolution properties of BaTiO3 nanoparticles in aqueous suspensions. In: Journal of Experimental Nanoscience, 6 (2). pp. 127-137.

Tripathy, Sushree Swarupa and Raichur, Ashok M (2008) Enhanced adsorption capacity of activated alumina by impregnation with alum for removal of As(V) from water. In: Chemical Engineering Journal, 138 (1-3). pp. 179-186.

U

Uda, T and Okabe, TH and Waseda, Y and Jacob, KT (2000) Contactless Electrochemical Reduction of Titanium (II) Chloride by Aluminum. In: Metallurgical and Materials Transactions B, 31 (04). pp. 713-721.

Uda, Tetsuya and Jacob, Thomas K and Hirasawa, Masahiro (2000) Technique for Enhanced Rare Earth Separation. In: Science, 289 (5488). pp. 2326-2329.

Uda, Tetsuya and Okabe, Toru H and Waseda, Yoshio and Jacob, KT (1999) Phase equilibria and thermodynamics of the system Dy-Mg-Cl at 1073 K. In: Journal of Alloys and Compounds, 284 (1-2). pp. 282-288.

Udyavar, Mradulla S and Dwarakadasa, ES (1992) Surface depletion of lithium in medium-strength aeronautical AI-Li alloys during heat treatment. In: Journal of Materials Science Letters, 11 (8). 490 -492.

Ueno, S and Jacob, KT and Waseda, Y (1989) Activities in liquid Na K and Al Mg alloys estimated using the pseudopotential theory of metals. In: High Temperature Materials and Processes, 8 (2). 89- 94.

Ueno, S and Waseda, Y and Jacob, KT and Tamaki, S (1988) Theoretical Treatment of Interaction Parameters in Multicomponent Metallic Solutions. In: Steel Research, 59 (11). 474 -483.

Ullal, CK and Balasubramaniam, KR and Gandhi, AS and Jayaram, V (2001) Non-equilibrium phase synthesis in $Al_2O_3-Y_2O_3$ by spray pyrolysis of nitrate precursors. In: Acta Materialia, 49 (14). pp. 2691-2699.

Umarjia, AM and Somasundaram, P and Rao, CNR (1988) Y3-xBa3+xCu6O14+δ system: A new family of superconductors. In: Physica C: Superconductivity, 153-15 (1). pp. 497-498.

Uyyuru, RK and Surappa, MK and Brusethaug, S (2007) Tribological behavior of $Al-Si/SiC_p$ composites/automobile brake pad system under dry sliding conditions. In: Tribology International, 40 (2). pp. 365-373.

V

Vadlamani, Bhaskar Sravan and Lalitha, K and Ranjan, Rajeev (2013) Anomalous polarization in the antiferroelectric-ferroelectric phase coexistence state in PbZrO3-Bi(Mg1/2Ti1/2)O-3. In: JOURNAL OF APPLIED PHYSICS, 114 (23).

Vaidehi, N and Akila, R and Shukla, AK and Jacob, KT (1986) Enhanced Ionic Conduction in Dispersed Solid Electrolyte Systems $CaF_2-Al_2O_3$ and $CaF_2-CeO_2$. In: Materials Research Bulletin, 21 (8). pp. 909-916.

Vaidyanathan, R and Dunand, DC and Ramamurty, U (2000) Fatigue crack-growth in shape-memory NiTi and NiTi-TiC composites. In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 289 (1-2). pp. 208-216.

Valderrama, JN and Jacob, KT (1978) Vapor pressure and thermodynamic properties of MgIn2O4. In: Journal of Inorganic and Nuclear Chemistry, 40 (6). pp. 993-997.

Valderrama-N, J and Jacob, KT (1977) Vapor pressure and dissociation energy of (In2O). In: Thermochimica Acta, 21 (2). 215-224 .

Valsan, M and Parameswaran, P and Rao, Bhanu Sankara K and Vijayalakshmi, M and Shastry, DH and Mannan, SL (1992) High-temperature low-cycle fatigue behavior of a NIMONIC PE-16 superalloy—Correlation with deformation and fracture. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (6). pp. 1751-1761.

Valsan, M and Sastry, DH and Rao, KBS and Mannan, SL (1994) Effect of strain rate on the high-temperature low-cycle fatigue properties of a nimonic PE-16 superalloy. In: Metallurgical and materials transactions a, 25 (1). pp. 159-171.

Vamsi, KV and Karthikeyan, S (2012) EFFECT OF OFF-STOICHIOMETRY AND TERNARY ADDITIONS ON PLANAR FAULT ENERGIES IN Ni3Al. In: 12th International Symposium on Superalloys, 09-13, 2012 , Seven Springs, PA , pp. 521-530.

Varamban, SV and Jacob, KT (1997) Thermodynamic constraints along isograms in ternary systems: application to three-phase equilibria. In: Materials Science and Engineering B, 49 (2). pp. 100-109.

Varamban, Vana S and Jacob, KT (1998) Discussion of "Retrograde solubility in semiconductors. In: Metallurgical and Materials Transactions A, 29 (5). pp. 1525-1526.

Varamban, Vana S and Jacob, KT (1997) Relation between integral and partial properties of ternary solutions along different composition trajectories. In: High Temperature Materials and Processes, 16 (4). pp. 227-242.

Varghese, V and Chattopadhyay, K and Narayanasamy, A (2004) Factors influencing the kinetics of electrochemical reactions in milling. In: Journal of Materials Science, 39 (16-17). pp. 5161-5167.

Varghese, V and Sharma, A and Chattopadhyay, K (2001) Reaction ball milling of systems involving ionic bonds. In: Materials Science and Engineering A, 304-30 . pp. 434-437.

Varma, KBR and Rao, KJ and Rao, CNR (1989) Novel features of rapidly quenched melts of Bi2(Ca,Sr) 3Cu2O8+δ. In: Applied Physics Letters, 54 (1). pp. 69-71.

Varma, Sreevidya G and Kiran, MSRN and Muthu, DVS and Ramamurty, U and Sood, AK and Asokan, S (2012) Thermally reversing window in Ge15Te85-xInx glasses: Nanoindentation and micro-Raman studies. In: JOURNAL OF NON-CRYSTALLINE SOLIDS, 358 (23). pp. 3103-3108.

Varughese, S and Kiran, MSRN and Ramamurty, U and Desiraju, GR (2012) Nanoindentation as a probe for mechanically-induced molecular migration in layered organic donor-acceptor complexes. In: Chemistry - An Asian Journal, 7 (9). pp. 2118-2125.

Varughese, Sunil and Kiran, MSRN and Solanko, Katarzyna A and Bond, Andrew D and Ramamurty, U and Desiraju, Gautam R (2011) Interaction anisotropy and shear instability of aspirin polymorphs established by nanoindentation. In: Chemical Science, 2 (11). pp. 2236-2242.

Vasan, SS and Modak, Jayant M and Natarajan, KA (2001) Some recent advances in the bioprocessing of bauxite. In: International Journal of Mineral Processing, 62 (1-4). pp. 173-186.

Vasanthakumar, B and Ravishankar, H and Subramanian, S (2013) Microbially induced selective flotation of sphalerite from galena using mineral-adapted strains of Bacillus megaterium. In: COLLOIDS AND SURFACES B-BIOINTERFACES, 112 . pp. 279-286.

Vasanthakumar, Balasubramanian and Ravishankar, Honnavar and Subramanian, Sankaran (2014) Basic studies on the role of components of Bacillus megaterium as flotation biocollectors in sulphide mineral separation. In: APPLIED MICROBIOLOGY AND BIOTECHNOLOGY, 98 (6). pp. 2719-2728.

Vasanthakumar, Balasubramanian and Ravishankar, Honnavar and Subramanian, Sankaran (2012) A Novel Property of DNA - As a Bioflotation Reagent in Mineral Processing. In: PLOS ONE, 7 (7).

Vasu, KI and Murty, KN (1972) A resistometric study of solute–solute interaction in dilute aluminium–silver alloys. In: Philosophical Magazine, 25 (1). pp. 241-246.

Vasu, KI and Sastry, DH and Prasad, YVRK (1969) On the mechanism of plastic flow at 86°k in quenched and aged aluminum. In: Philosophical Magazine , 20 (165). pp. 629-633.

Vathsala, * and Natarajan, KA (1989) Some electrochemical aspects of grinding media corrosion and sphalerite flotation. In: International Journal of Mineral Processing, 26 (3-4). pp. 193-203.

Velmanirajan, K and Abu Thaheer, Syed A and Narayanasamy, R and Madhavan, R and Suwas, Satyam (2013) Effect of Annealing Temperature in Al 1145 Alloy Sheets on Formability, Void Coalescence, and Texture Analysis. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (4). pp. 1091-1107.

Venkatachala, BJ and Nath, G (1980) Incompressible boundary layer for longitudinal flow over a cylinder with an applied magnetic field. In: Archiwum Mechaniki Stosowanej, 32 (2). pp. 273-283.

Venkatachalam, P and Roy, Shibayan and Ravisankar, B and Paul, Thomas V and Vijayalakshmi, M and Suwas, Satyam (2011) Texture evolution in an Al-Cu alloy during equal channel angular pressing: the effect of starting microstructure. In: Journal of Materials Science (full set), 46 (20). pp. 6518-6527.

Venkataraman, M and Hajra, JP (1983) Thermodynamics of nickel-manganese alloys using oxide and fluoride electrolytes. In: Metallurgical and Materials Transactions A, 14 (10). pp. 2125-2130.

Venkataraman, M and Hajra, JP (1982) Thermodynamics of cobalt-manganese alloys using fluoride and oxide electrolytes. In: Scripta Metallurgica, 16 (9). pp. 1043-1048.

Venkatasubbu, Devanand G and Ramasamy, S and Avadhani, GS and Palanikumar, L and Kumar, J (2012) Size-mediated cytotoxicity of nanocrystalline titanium dioxide, pure and zinc-doped hydroxyapatite nanoparticles in human hepatoma cells. In: Journal of Nanoparticle Research, 14 (4).

Venkatasubbu, Devanand G and Ramasamy, S and Avadhani, GS and Ramakrishnan, V and Kumar, J (2013) Surface modification and paclitaxel drug delivery of folic acid modified polyethylene glycol functionalized hydroxyapatite nanoparticles. In: POWDER TECHNOLOGY, 235 . pp. 437-442.

Venkatesan, R and Dwarakadasa, ES and Ravindran, M (2003) Biofilm formation on structural materials in deep sea environments. In: Indian Journal Of Engineering And Materials Sciences, 10 (6). pp. 486-491.

Venkatesan, R and Dwarkadasa, ES and Raghuram, AC (1998) Effect of deep sea environment on the corrosion behaviour of metals and alloys. In: Transactions of the Metal Finishers Association of India, 7 (1). pp. 63-71.

Venkatesan, R and Venkatasamy, MA and Bhaskaran, TA and Dwarakadasa, ES and Ravindran, M (2002) Corrosion of ferrous alloys in deep sea environments. In: British Corrosion Journal, 37 (4). pp. 257-266.

Venkateshwaran, Balaji and Hajra, JP (1996) A generalized quaternary liquid solution model and its application to the Ga-In-As-P system. In: Materials Science and Engineering B, 41 (3). pp. 362-367.

Venkateswarlu, K and Rameshbabu, N and Sreekanth, D and Bose, A C and Muthupandi, V and Babu, N K and Subramanian, S (2012) Role of electrolyte additives on in-vitro electrochemical behavior of micro arc oxidized titania films on Cp Ti. In: APPLIED SURFACE SCIENCE, 258 (18). pp. 6853-6863.

Venkateswarlu, K and Rameshbabu, N and Sreekanth, D and Bose, AC and Muthupandi, V and Subramanian, S (2013) Fabrication and characterization of micro-arc oxidized fluoride containing titania films on Cp Ti. In: CERAMICS INTERNATIONAL, 39 (1). pp. 801-812.

Venkateswarlu, K and Rameshbabu, N and Sreekanth, D and Sandhyarani, M and Bose, AC and Muthupandi, V and Subramanian, S (2013) Role of electrolyte chemistry on electronic and in vitro electrochemical properties of micro-arc oxidized titania films on Cp Ti. In: Electrochimica Acta, 105 . pp. 468-480.

Venkatraman, S and Kishore, * (1997) Impact studies in glass epoxy laminates containing foam. In: Journal of Reinforced Plastics and Composites, 16 (7). pp. 618-630.

Venkatraman, S and Kishore, * (1998) Investigations on the role of foam layers in the failure of glass-epoxy composite subjected to repeated impacts. In: Journal of Reinforced Plastics and Composites, 17 (08). pp. 741-751.

Venkatraman, S and Kishore, * (1998) Response to impacts in composites containing foam. In: Journal of Reinforced Plastics and Composites, 17 (14). pp. 1281-1291.

Venkatraman, S and Kishore, * (1996) Study of fracture features in foam bearing glass epoxy composites subjected to repeated impacts. In: Bulletin of Materials Science, 19 (6). 1143-1153 .

Venkatraman, S and Kishore, * (1997) The role of the interface in foam-bearing glass-epoxy composites subjected to impact loading. In: Composite Interfaces, 5 (1). pp. 55-67.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Criteria for prediction of flow instabilities and microstructural manifestations during warm working of AISI 304L stainless steel. In: Materials Science and Technology, 9 (11). pp. 1021-1030.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Influence of cast versus wrought microstructure on the processing map for hot working of stainless steel type AISI 304. In: Materials Letters, 17 (6). pp. 388-392.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Influence of state of stress on the processing map for hot working of stainless steel type AISI 304L: compression vs. torsion. In: Materials Science and Engineering: A, 160 (1). pp. 63-69.

Venugopal, S and Mannan, SL and Prasad, YVRK (1996) Influence of strain rate and state-of-stress on the formation of ferrite in stainless steel type AISI 304 during hot working. In: Materials Letters, 26 (3). pp. 161-165.

Venugopal, S and Mannan, SL and Prasad, YVRK (1997) Instability map for cold and warm working of as-cast 304 stainless steel. In: Journal of Materials Processing Technology, 65 (1-3). pp. 107-115.

Venugopal, S and Mannan, SL and Prasad, YVRK (1997) On the modelling of grain size during hot working of stainless steels type AISI 304 and 316. In: Journal of Materials Science Letters, 16 (2). pp. 137-142.

Venugopal, S and Mannan, SL and Prasad, YVRK (1996) Optimization of cold and warm workability in 304 stainless steel using instability maps. In: Metallurgical and Materials Transactions A, 27 (1). pp. 119-126.

Venugopal, S and Mannan, SL and Prasad, YVRK (1995) Optimization of cold and warm workability in stainless steel type AISI 316L using instability maps. In: Journal of Nuclear Materials, 227 (1-2). pp. 1-10.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for cold and hot working of as-cast stainless steel type AISI 304. In: Journal of Materials Science Letters, 12 (23). pp. 1875-1878.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for mechanical working of stainless steel type AISI 316 L. In: Scripta Metallurgica et Materialia, 28 (6). pp. 715-720.

Venugopal, S and Ravishankar, C and Mannan, SL and Prasad, YVRK (1994) Microstructural features of a type 304L stainless steel deformed at 1473 K in the strain rate interval 10−3 to 102 s−1. In: Scripta Metallurgica et Materialia, 30 (12). 1611-1616 .

Venugopal, S and Tyagi, AK and Krishan, K and Mannan, SL and Prasad, YVRK (1995) Influence of carbide particles on the dynamic recrystallization of as-cast 304 stainless steel: a study using secondary ion mass spectrometric (SIMS) analysis. In: Materials Letters, 25 (5-6). pp. 245-248.

Venugopal, S and Vasudevan, M and Venugopal, Sridhar and Sivaprasad, PV and Jha, SK and Pandey, P and Mannan, SL and Prasad, YVRK (1996) Industrial validation of processing maps of 316L stainless steel using hot forging, rolling, and extrusion. In: Materials Science and Technology, 12 (11). pp. 955-962.

Venugopal, S and Venugopal, Sridhar and Sivaprasad, PV and Vasudevan, M and Mannan, SL and Jha, SK and Pandey, P and Prasad, YVRK (1996) Validation of processing maps for 304L stainless steel using hot forging, rolling and extrusion. In: Journal of Materials Processing Technology, 99 (04). pp. 343-350.

Venugopal, S and Ravishankar, C and Mannan, SL and Prasad, YVRK (1994) Comments on the paper entitled “Microstructural features of a type 304L stainless steel deformed at 1473 K in the strain rate interval 10−3 to 102 s−1”. In: Scripta Metallurgica et Materialia, 30 (12). 1611-1616 .

Verma, Akash and Biswas, Krishanu and Tiwary, Chandra Sekhar and Mondal, Amit Kumar and Chattopadhyay, Kamanio (2011) Combined Cryo and Room-Temperature Ball Milling to Produce Ultrafine Halide Crystallites. In: Metallurgical and Materials Transactions A, 42A (4). pp. 1127-1137.

Verma, Nisha and Cadambi, Sumanth and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) Micromechanisms of damage nucleation during contact deformation of columnar multilayer nitride coatings. In: ACTA MATERIALIA, 60 (6-7). pp. 3063-3073.

Verma, Nisha and Jayaram, Vikram (2013) Detailed investigation of contact deformation in ZrN/Zr multiplayer-understanding the role of volume fraction, bilayer spacing, and morphology of interfaces. In: JOURNAL OF MATERIALS RESEARCH, 28 (22). pp. 3146-3156.

Verma, Nisha and Jayaram, Vikram (2012) The influence of Zr layer thickness on contact deformation and fracture in a ZrN-Zr multilayer coating. In: Journal of Materials Science (full set), 47 (4). pp. 1621-1630.

Victoria, Bhattacharya and Chattopadhyay, K (2001) Frictional characteristics of nano-embedded aluminium alloys. In: Materials Science Forum, 360-362 . pp. 295-300.

Vijayalakshmi, SP and Raichur, AM (2002) Bioflocculation of high-ash Indian coals using Paenibacillus polymyxa. In: International Journal of Mineral processing, 67 (1-4). pp. 199-210.

Vijayalakshmi, SP and Raichur, AM (2003) The utility of Bacillus subtilis as a bioflocculant for fine coal. In: Colloids and Surfaces B: Biointerfaces, 29 (4). pp. 265-275.

Vijayaraju, K and Dwarakadasa, ES (1986) Computer-aided composition-treatment-structure-property correlation studies in steels. In: Bulletin of Materials Science, 8 (2). pp. 193-198.

Vijayaraju, K and Dwarakadasa, ES and Abboud, Jaafar Hadi (1985) SEM studies of fractures in spinodally hardened Cu-9Ni-6Sn-X alloys. In: Journal of Materials Science Letters, 4 (9). pp. 1111-1114.

Vijayaraju, K and Dwarakadasa, ES and Panchapagesan, TS (1986) Role of vacancies in the ductile fracture of commercially pure aluminum. In: Journal of Materials Science Letters, 5 (10). pp. 1000-1002.

Violette, Aurelie and Riotte, Jean and Braun, Jean-Jacques and Oliva, Priscia and Marechal, Jean-Christophe and Sekhar, M and Jeandel, Catherine and Subramanian, S and Prunier, Jonathan and Barbiero, Laurent and Dupre, Bernard (2010) Formation and preservation of pedogenic carbonates in South India, links with paleo-monsoon and pedological conditions: Clues from Sr isotopes, U-Th series and REEs. In: Geochimica et Cosmochimica Acta, 74 (24). pp. 7059-7085.

Viswanath, B and Raghavan, R and Gurao, NP and Ramamurty, U and Ravishankar, N (2008) Mechanical properties of tricalcium phosphate single crystals grown by molten salt synthesis. In: ACTA BIOMATERIALIA, 4 (5). pp. 1448-1454.

Viswanath, B and Shastry, VV and Ramamurty, U and Ravishankar, N (2010) Effect of calcium deficiency on the mechanical properties of hydroxyapatite crystals. In: Acta Materialia, 58 (14). pp. 4841-4848.

Viswanathan, GB and Karthikeyan, S and Sarosi, PM and Unocic, RR and Mills, MJ (2006) Microtwinning during intermediate temperature creep of polycrystalline Ni-based superalloys: mechanisms and modelling. In: Philosophical Magazine, 86 (29-31). pp. 4823-4840.

Viswanathan, NN and Srinivasan, MN and Lahiri, AK (1997) Mathematical modelling of divided blast cupola. In: Steel Research, 68 (5). pp. 192-197.

Viswanathan, NN and Srinivasan, MN and Lahiri, AK (1998) Process simulation of cupola. In: ISIJ International, 38 (10). pp. 1062-1068.

Vitta, S (1989) Structure and electron transport anomalies in InSe-In6Se 7 composite. In: Journal of Applied Physics, 66 (12). pp. 5885-5889.

Vlach, KC and Salas, O and Ni, H and Jayaram, V and Levi, CG and Mehrabian, R (1991) A thermogravimetric study of the oxidative growth of Al2O3/Al alloy composites. In: Journal of Materials Research, 6 (9). pp. 1982-1995.

W

Wagner, M F-X and Nayan, N and Ramamurty, U (2008) Healing of fatigue damage in NiTi shape memory alloys. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 41 (18). pp. 185408-4.

Wagner, MF-X and Nayan, N and Ramamurty, U (2008) Healing of fatigue damage in NiTi shape memory alloys. In: Journal of Physics D: Applied Physics, 41 (18). 185408-1-185408-4.

Wang, Cunshan and Gao, Linhui and Li, Gang and Wang, Yanfang and Xia, Yuanliang and Bysakh, S and Dong, Chuang (2003) Laser-induced self-propagating reaction synthesis of amorphous-based composite Zr-Al-Ni-Cu alloys. In: Journal of Materials Science, 38 (7). pp. 1377-1381.

Wang, RM and Surappa, KM and Tao, CH and Li, CZ and Yan, MG (1998) Microstructure and interface structure studies of SiCp-reinforced Al (6061) metal-matrix composites. In: Materials Science and Engineering: A, 252 (1-2). pp. 219-226.

Warthi, Nilesh and Ghosh, Pradipta and Chokshi, Atul H (2013) Approaching theoretical strengths by synergistic internal and external size refinement. In: SCRIPTA MATERIALIA, 68 (5). pp. 225-228.

Waseda, Y and Chen, HS and Jacob, KT and Shibata, H (2007) Relation between Local Structure and Glass Forming Ability of Liquid Alloys. In: High Temperature Materials and Processes, 26 (5-6). pp. 403-416.

Waseda, Y and Jacob, KT (1981) Computation of thermodynamic properties of liquid ferrous alloys from structural measurements. In: Arch. Eisenhuttenwesen, 52 . pp. 131-136.

Waseda, Y and Jacob, KT (1983) Electron charge transfer in liquid copper tin alloys. In: Metallurgical and Materials Transactions A, 14 (8). pp. 1748-1750.

Waseda, Y and Jacob, KT (1981) Refinement of the correlation between isothermal compressibility and surface tension of liquid metals. In: physica status solidi (a), 68 (2). K117-K122.

Waseda, Y and Jacob, KT (1979) A comparison of the structure of liquid alloys derived from thermodynamic and diffraction studies. In: Metallurgical and Materials Transactions B, 10 (3). pp. 453-455.

Waseda, Y and Jacob, KT and Iguchi, Y and Narushima, T (1994) Theoretical estimation of the effect of minor elements on the solubility of oxygen in silicon melt. In: Journal of Crystal Growth, 139 (3-4). pp. 357-362.

Waseda, Y and Jacob, KT and Tamaki, S and Tsuchiya, Y (1978) Vapor pressure of liquid metals and alloys. In: Zeitschrift Naturforschung Teil A, 33 (8). pp. 940-945.

Waseda, Y and Tamaki, S and Jacob, KT (1984) Current views on microscopic thermodynamics of liquid alloys. In: High Temperature Material Processes, 6 (3-4). pp. 119-141.

Waseda, Y and Ueno, S and Jacob, KT (1989) Theoretical treatment of vapour pressures for liquid metals. In: Journal of Materials Science Letters, 8 (7). 857 -861.

Waseda, Yoshio and Chen, Ho-Sou and Jacob, Kallarackel Thomas and Shibata, Hiroyuki (2008) On the glass forming ability of liquid alloys. In: SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 9 (2). 023003-023017.

Waseda , Y and Jacob, KT and Tamaki, S (1979) Heat of Mixing and Activities in Liquid Al-Sn Alloys. In: Zeitschrift Naturforschung Teil A, 34 (3). pp. 320-324.

Waziers, Segolene de and Roy, S and Satyam Suwas, S and Tamirisakandala, S and Srinivasan, R and Miracle, DB (2009) Solidification Microstructure and Texture in Grain-refined Titanium alloys. In: Texture and Microstructure of Steels and Some Other Materials, 2009, London.

X

Xavier, Priti and Bose, Suryasarathi (2013) Multiwalled-carbon-nanotube-induced miscibility in near-critical PS/PVME blends: assessment through concentration fluctuations and segmental relaxation. In: Journal of Physical Chemistry B, 117 (28). pp. 8633-8646.

Xu, J and Ramamurty, U and Ma, E (2010) The fracture toughness of bulk metallic glasses. In: Journal of the Minerals Metals & Materials Society (JOM), 62 (4). pp. 10-18.

Y

Yamakawa, K and Trolier‐McKinstry, S and Dougherty, JP and Krupanidhi, SB (1995) Reactive magnetron co?sputtered antiferroelectric lead zirconate thin films. In: Applied Physics Letters, 67 (14). pp. 2014-2016.

Yang, Xianfeng and Karthik, Chinnathambi and Li, Xiuyan and Fu, Junxiang and Fu, Xionghui and Liang, Chaolun and Ravishankar, N and Wu, Mingmei and Ramanath, Ganapathiraman (2009) Oriented Nanocrystal Arrays of Selectable Polymorphs by Chemical Sculpture. In: Chemistry Of Materials, 21 (14). pp. 3197-3201.

Yegneswaran, AH and Raman, KS and Prasad, YVRK (1982) Texture strengthening in warm-rolled cadmium-1% silver alloy. In: Philosophical Magazine A & B, 46 (3). pp. 507-519.

Yegneswaran, AH and Raman, KS and Prasad, YVRK (1982) Texture strengthening in warm-rolled cadmium-1% silver alloy. In: Philosophical Magazine A, 46 (3). pp. 507-509.

Yegneswaran, AH and Prasad, YVRK and Raman, KS (1978) Crystallographic texture and hardness in work softened and annealed cadmium — 1% silver alloy. In: Scripta Metallurgica, 12 (6). 487-492 .

Yegneswaran, AH and Prasad, YVRK and Raman, KS (1978) Effect of grain size and texture on the mechanical properties of warm worked cadmium-1.5 Pct zinc alloy. In: Metallurgical Transactions. Physical Metallurgy and Material, 9 (9). 1311-1316 .

Yoo, Byung-Gil and Park, Kyoung-Won and Lee, Jae-Chul and Ramamurty, U and Jang, Jae-il (2009) Role of free volume in strain softening of as-cast and annealed bulk metallic glass. In: Journal of material research, 24 (4). pp. 1405-1416.

Yoo, Byung-Gil and Choi, In-Chul and Kim, Yong-Jae and Ramamurty, Upadrasta and Jang, Jae-il (2013) Room-temperature anelasticity and viscoplasticity of Cu-Zr bulk metallic glasses evaluated using nanoindentation. In: Materials Science and Engineering: A, 577 . pp. 101-104.

Yoo, Byung-Gil and Choi, In-Chul and Kim, Yong-Jae and Suh, Jin-Yoo and Ramamurty, Upadrasta and Jang, Jae-il (2012) Further evidence for room temperature, indentation-induced nanocrystallization in a bulk metallic glass. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 545 . pp. 225-228.

Yoo, Byung-Gil and Kim, Ju-Young and Kim, Yong-Jae and Choi, In-Chul and Shim, Sanghoon and Tsui, Ting Y. and Bei, Hongbin and Ramamurty, Upadrasta and Jang, Jae-il (2012) Increased time-dependent room temperature plasticity in metallic glass nanopillars and its size-dependency. In: INTERNATIONAL JOURNAL OF PLASTICITY, 37 . pp. 108-118.

Yoo, Byung-Gil and Kim, Kyu-Sik and Oh, Jun-Hak and Ramamurty, U and Jang, Jae-il (2010) Room temperature creep in amorphous alloys: Influence of initial strain and free volume. In: Scripta Materialia, 63 (12). pp. 1205-1208.

Yoo, Byung-Gil and Kim, Yong-Jae and Oh, Jun-Hak and Ramamurty, U and Jang, Jae-il (2009) On the hardness of shear bands in amorphous alloys. In: Scripta Materialia, 61 (10). pp. 951-954.

Yoon, Sang-Won and Seo, Jong-Hyun and Chae, Keun-Hwa and Park, Jong-Keuk and Song, Jong-Han and Jayaram, Vickram and Lee, Kon-Bae and Seong, Tae-Yeon and Hoon-Kwon, * and Ahn, Jae-Pyoung (2012) The Effects of Nitrogen Bonding on Hardness of AIN/CrN Multilayer Hard Coatings. In: International Conference on Electronic Materials (IUMRS-ICEM), AUG 22-27, 2010, Seoul, SOUTH KOREA, pp. 1476-1479.

Yu, Fuxiao and Dwarakadasa, DS and Ranganathan, S (2003) Microstructure and mechanical properties of spray-formed Al-Si-Pb alloys. In: Journal of Materials Processing Technology, 137 (1-3). pp. 164-167.

Z

Zachariah, Z and Tatiparti, Sankara Sarma V and Mishra, SK and Ramakrishnan, N and Ramamurty, U (2013) Tension-compression asymmetry in an extruded Mg alloy AM30: temperature and strain rate effects. In: Materials Science and Engineering: A, 572 . pp. 8-18.

Zhang, DL and Chattopadhyay, K and Cantor, B (1991) Heterogeneous nucleation of solidification of cadmium particles embedded in an aluminium matrix. In: Journal of Materials Science (full set), 26 (6). pp. 1531-1544.

This list was generated on Wed Apr 23 15:40:12 2014 IST.